AVNET AES-MS-MT3620-GUARD-100 Mode d'emploi

Taper
Mode d'emploi
STEP 1: Download Microsoft Azure Sphere SDK from:
aka.ms/AzureSphereSDK
STEP 2: Install Azure Sphere SDK on a Windows 10 computer, by following the
detailed instructions located at: avnet.me/ms_sphere_docs
STEP 3: Connect the provided cables and power-up Guardian:
- Connect the Ethernet cable from Guardian to the equipment
- Connect USB cable type-A connector to the on-site equipment
- Connect USB cable type-B connector to Guardian
- Once connected, the Guardian LEDs should indicate as follows:
1, 2, 3 LEDs: Amber
Power LED : Green
STEP 4: Complete the Microsoft installation instructions to:
- Set up an Azure Sphere account (and subscribe to notifications)
- Claim your device
- Configure Wi-Fi settings of your device
STEP 5: View documentation and download
example applications for the Guardian-100 from:
avnet.me/mt3620-guardian
Thank you for selecting GUARDIAN-100.
Key links and installation steps are provided
here to enable you to develop Azure Sphere
applications that securely connect your
equipment to the internet.
AZURE SPHERE
GUARDIAN-100
NOTE:
Included with this product is copyrighted software that is licensed under
the GPL, LGPL or other open source licenses, listed below.
You may obtain the source code for applicable software from
3rdpartysource.microsoft.com or by sending mail to:
Microsoft Corporation, Source Code Compliance Team
One Microsoft Way, Redmond, WA 98052
Important Product Information
Before using Guardian-100, please read the Avnet Design Kit License and
Product Warranty located at avnet.me/AvnetTermsAndConditions.
Use of Guardian-100 signifies your and your company or organizations
acceptance of and compliance with this License.
If you or your company or organization do not accept these License terms,
do not open the antistatic bag containing Guardian-100, or use Guardian-100.
Contact information
North America
2211 S 47th Street
Phoenix, Arizona 85034
United States of America
1-800-585-1602
Copyright © 2022 Avnet, Inc. AVNET, “Reach Further” and the Avnet logo are registered
trademarks of Avnet, Inc. All other brands are the property of their respective owners.
FY23_800_Azure_Sphere_Guardian_QSC_al
1.800.332.8638 / avnet.com
FCC Compliance Statements
This product contains the AES-MS-MT3620-M-G-3 module from Avnet
Model FCC ID IC ID
Azure Sphere MT3620
Module
2AF62-AVT3620C3 21571-AVT3620C3
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting
devices, a separation distance of 20cm or more should be maintained
between the antenna of this device and persons during operation. To ensure
compliance, operations at closer distances than this are not recommended.
This device complies with Industry Canada License-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
onditions suivantes:
1. L’appareil ne doit pas produire de brouillage, et
2. L’utilisateur de l’appa-reil doit accepter tout brouillage
radioélectrique subi, meme si le brouillage est susceptible d’en com-
promettre le fonctionnement.
ISED Radiation Exposure Statement
To comply with ISED Canada RF exposure limits for general population /
uncontrolled exposure, the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be operating in conjunction with any other antenna or
transmitter.
Déclaration ISED d’exposition aux radiations
Pour se conformer à Industrie Canada RF limites d’exposition pour la
population générale / exposition non contrôlée, l’antenne utilisée pour ce
transmetteur doit être installée pour fournir une distance d’au moins 20
cm de toutes les personnes et ne doit pas fonctionner en conjonction avec
toute autre antenne ou transmetteur.
WARNING: Changes or modifications not expressly approved by Avnet
could void the users authority to operate the equipment.
Industry Canada Compliance Statements
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

AVNET AES-MS-MT3620-GUARD-100 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues