resideo TH305/H Mode d'emploi

Marque: resideo

Modèle: TH305/H

Catégorie: Thermostats

Taper: Mode d'emploi

69-2793EF-05

Owner’s

Guide

TH305

Non-programmable Thermostat

69-2793EF—05 2

Overview

About your new thermostat ..................................................................................... 3

Controls and display ................................................................................................... 4

Installation

Installation guidelines................................................................................................ 5

Mounting the thermostat......................................................................................... 6

Wiring..................................................................................................................................7

Configuration switches..............................................................................................8

Setup menu ..................................................................................................................... 9

Operation

Temperature display and setting....................................................................... 10

Power outage ............................................................................................................... 10

Appendices

In case of difficulty.................................................................................................... 11

Specifications .............................................................................................................. 12

3-year limited warranty........................................................................................... 13

Customer Assistance ............................................................................................... 14

Table of contents

3 69-2793EF—05

The TH305 thermostat is designed to control an electric heating

system such as a baseboard heater, a radiant ceiling, a convector or

a fan-forced convector.

This thermostat cannot be used with:

• a resistive load under 1.25 A

• a resistive load over 16.7 A

• a system driven by a contactor or a relay (inductive load)

• a central heating system

SUPPLIED PARTS

• One (1) thermostat

• Two (2) 6-32 mounting screws

• Two (2) solderless connectors

About your new thermostat

69-2793EF—05 4

Controls and display

Temperature

display

Temperature

adjustment

buttons

Keypad lock

Heating intensity

Appears when the thermostat is

configured for a fan-forced

heater.

5 69-2793EF—05

TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN POWER

PANEL TO AVOID ELECTRICAL SHOCK.

• The installation must be performed by a qualified electrician and must

comply with electrical codes of your region.

• Do NOT install the thermostat in an area where it can be exposed to water or

rain.

• Avoid locations where there are air drafts (such as the top of a staircase or

an air outlet), dead air spots (such as behind a door), or direct sunlight.

• Do not install the thermostat on a wall section that conceals air ducts,

chimney pipes or stove pipes.

• Install the thermostat about 1.5 m (5 feet) high, on an inside wall facing the

heater.

• Install the thermostat onto an electrical box.

• This thermostat has tinned copper wires for line and load connections.

Special CO/ALR solderless connectors must be used if the thermostat will

be connected to aluminium wires.

• The thermostat wires are not polarized; either wire can be connected to the

load or to the power supply.

• Keep the air vents at the top and bottom of the thermostat clean and free

from obstructions.

Installation guidelines

69-2793EF—05 6

1) Loosen the screw and remove the faceplate of

the thermostat from its wallplate. (The screw

remains captive on the wallplate.)

2) Make the connections using solderless

connectors for copper wires. The thermostat

wires are non-polarized; this means either wire

can be connected to either terminal.

3) Install the wallplate to the electrical box.

4) Set the configuration switches on the back of

the thermostat’s faceplate (see page 6).

5) Install the faceplate of the thermostat back on

the wallplate and tighten the screw.

6) If there is a protective film or sticker on the

thermostat’s screen, peel it off.

7) Apply power to the thermostat. Verify the

installation by checking that the heater can be

turned On and Off by raising and lowering the

setpoint using the and buttons.

Mounting the thermostat

7 69-2793EF—05

Wiring

Electrical

panel

Heater

Electrical

box

Thermostat

Electrical

panel

Heater

Electrical

box

Thermostat

69-2793EF—05 8

The configuration switches are on the back of the

thermostat. The factory settings are indicated by the

gray cells in the following table.

Configuration switches

Switches

1 Keypad lock a

a. The settings are locked. The temperature adjustment buttons

only allow you to view the temperature setpoint.

Off On

2 Cycle length b

b. Select short cycles in most cases as it provides better

temperature control. However, you must select long cycles if

you have a fan-forced heater. is displayed when long cycles

are selected.

Short Long

3 Temperature display format °C °F

9 69-2793EF—05

1) Press the and buttons simultaneously for three seconds to

enter the configuration menu.

2) Press the or button to set the displayed parameter.

3) Press the and buttons simultaneously for one second to

display the next parameter.

4) Press the and buttons simultaneously for three seconds to

exit the configuration menu.

NOTE: The thermostat will automatically save any changes made and return to

its normal display if you do not press any button for one minute.

Setup menu

Parameter Settings

Display and default setting

Minimum

setpoint

5 °C - 30 °C

(41 °F - 86 °F)

Maximum

setpoint

5 °C - 30 °C

(41 °F - 86 °F)

69-2793EF—05 10

The thermostat normally displays the actual temperature.

• To view the setpoint temperature, press

once on either temperature adjustment

button. The setpoint temperature will

appear for 5 seconds. The icon

appears when the setpoint is displayed.

• To change the setpoint temperature,

press the appropriate button until the

desired value is displayed.

• The screen is backlit for 10 seconds when any button is pressed.

During a power outage, the setpoint is saved in memory. You do not

need to adjust the temperature when power returns.

Temperature Display and Setting

Power outage

11 69-2793EF—05

In case of difficulty

PROBLEM SOLUTIONS

Thermostat’s

housing is hot.

This is normal. When the thermostat is running at full capacity, its

housing can reach 40 °C (104 °F).

Wrong

temperature is

displayed.

Rectify if any of the following conditions applies:

• The thermostat is exposed to air draft.

• The sticker on the thermostat’s screen has not been removed.

• The thermostat is located near or above a heat source such as

a light dimmer.

Display

disappears and

reappears after a

few minutes.

The thermal protection device on the heater has temporarily

opened. This can happen if the heater is obstructed by furniture

or curtain and has overheated, or if the heater’s thermal

protection device is too sensitive.

LO is displayed The measured temperature is below the display range. Heating is

activated.

HI is displayed The measured temperature is above the display range.

E1, E2 is

displayed

The thermostat performance is reduced due to a sensor error.

Please contact technical support for more information.

69-2793EF—05 12

Power supply: 120/208/240 VAC, 60 Hz

Minimum load: 1.25 A / 150 W @ 120 VAC, 60 Hz

1.25 A / 260 W @ 208 VAC, 60 Hz

1.25 A / 300 W @ 240 VAC, 60 Hz

Maximum load: 16.7 A / 2000 W @ 120 VAC, 60 Hz

16.7 A / 3465 W @ 208 VAC, 60 Hz

16.7 A / 4000 W @ 240 VAC, 60 Hz

Setpoint range: 5 °C to 30 °C (41 °F to 86 °F)

Display range: 0 °C to 60 °C (32 °F to 140 °F)

Resolution: ± 0.5 °C (± 1 °F)

Storage: -20 °C to 50 °C (-4 °F to 120 °F)

ICES-003 Class B Notice - Avis NMB-3, Classe B

This Class B digital apparatus complies with

Canadian ICES-003.

CAUTION: ELECTRONIC WASTE NOTICE

The product should not be disposed of with other household

waste. Check for the nearest authorized collection centers or

authorized recyclers. The correct disposal of end-of-life

equipment will help prevent negative consequences for the

environment and human health.

Specifications

273699

Energy Verified

Only

13 69-2793EF—05

Resideo warrants this product to be free from defects in workmanship or

materials, under normal use and service, for a period of three (3) years from the

date of first purchase by the original purchaser. If at any time during the

warranty period the product is determined to be defective due to workmanship

or materials, Resideo shall repair or replace it (at Resideo’s option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to the place

from which you purchased it; or

(ii) call Resideo Customer Care at 1-800-468-1502. Customer Care will make

the determination whether the product should be returned to the following

address: Resideo Return Goods, Dock 4 MN10-3860, 1985 Douglas Dr. N.,

Golden Valley, MN 55422, or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty shall

not apply if it is shown by Resideo that the defect was caused by damage which

occurred while the product was in the possession of a consumer.

Resideo’s sole responsibility shall be to repair or replace the product within the

terms stated above. RESIDEO SHALL NOT BE LIABLE FOR ANY LOSS OR

DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF

ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS

PRODUCT. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY RESIDEO MAKES ON

THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES,

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

3-year limited warranty

This product is manufactured by Resideo Technologies, Inc. and its affiliates.

www.resideo.com

Resideo Inc., 1985 Douglas Drive North,

Golden Valley, MN 55422

69-2793EF—05 M.S. Rev. 01-21 | Printed in United States

PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE THREE YEAR

DURATION OF THIS WARRANTY. Some states do not allow limitations on how

long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other rights

which vary from state to state. If you have any questions concerning this

warranty, please write Resideo Customer Care, 1985 Douglas Dr, Golden

Valley, MN 55422 or call 1-800-468-1502.

For assistance with this product please visit http://resideo.com

or call Customer Care toll-free at 1-800-468-1502.

Customer Assistance

Guide du

propriétaire

TH305

Thermostat non-programmable

69-2793EF—05 2

Aperçu

À propos de votre nouveau thermostat ............................................................. 3

Commandes et affichage ......................................................................................... 4

Installation

Consignes d'installation............................................................................................ 5

Installation du thermostat .......................................................................................6

Branchement .................................................................................................................. 7

Sélecteurs de configuration .................................................................................... 8

Menu de configuration ..............................................................................................9

Fonctionnement

Affichage et réglage de la température.......................................................... 10

Panne de courant ...................................................................................................... 10

Annexes

Problèmes et solutions ........................................................................................... 11

Fiche technique.......................................................................................................... 13

Garantie limitée de 3 ans....................................................................................... 14

Service à la clientèle................................................................................................. 16

Table des matières

3 69-2793EF—05

Le thermostat TH305 est conçu pour commander un appareil de

chauffage électrique tel qu’une plinthe électrique, un plafond

radiant, un convecteur ou un ventiloconvecteur.

Ce thermostat ne peut être utilisé avec :

• une charge résistive inférieure à 1,25 A

• une charge résistive supérieure à 16,7 A

• un appareil muni d’un contacteur ou d’un relais (charge inductive)

• un système de chauffage central

PIÈCES FOURNIES

•Un (1) thermostat

• Deux (2) vis de montage 6-32

• Deux (2) connecteurs sans soudure

À propos de votre nouveau thermostat

69-2793EF—05 4

Commandes et affichage

Température

Clavier

verrouillé

Apparaît lorsque le

thermostat est configuré

pour un ventiloconvecteur Boutons de

réglage de la

température

Intensité du chauffage

5 69-2793EF—05

METTRE LE SYSTÈME DE CHAUFFAGE HORS TENSION AU PANNEAU

ÉLECTRIQUE AFIN D'ÉVITER TOUT RISQUE DE CHOC ÉLECTRIQUE.

• L’installation doit être effectuée par un électricien qualifié et doit être

conforme aux codes de l'électricité en vigueur dans votre région.

• Ne PAS installer le thermostat à un endroit où il risque d’être exposé à l’eau

ou à la pluie.

• Éviter les endroits où il y a des courants d'air (comme dans le haut d'un

escalier ou une sortie d'air), où il manque de circulation d’air (comme

derrière une porte) ou qui sont directement exposés au soleil.

• Ne pas installer le thermostat sur un mur qui dissimule des conduits d’air ou

d’une cheminée.

• Installer le thermostat à environ 1,5 mètre (5 pieds) du sol, sur une cloison

intérieure faisant face à l’appareil de chauffage.

• Installer le thermostat sur une boîte électrique.

• Le fils du thermostat servant à la connexion de l’alimentation et de la

charge sont en cuivre étamé. Si vous les reliez à des fils d’aluminium, utiliser

des connecteurs spéciaux sans soudure CO/ALR conçus à cette fin.

• Les fils du thermostat ne sont pas polarisés; le sens du branchement n’a

donc aucune importance.

• Garder les ouvertures d’aération du thermostat propres et dégagées en tout

temps.

Consignes d'installation

69-2793EF—05 6

1) Dévisser la vis et séparer la façade du

thermostat de sa plaque murale. (La vis reste

captive sur la plaque murale.)

2) Faire le branchement en utilisant des

connecteurs sans soudure pour fils de cuivre. Les

fils du thermostat sont non-polarisés; le sens du

branchement n’a donc aucune importance.

3) Installer la plaque murale sur la boîte électrique.

4) Configurer le thermostat à l’aide des sélecteurs

à l’arrière de la façade (voir la page 6).

5) Retourner la façade du thermostat sur la

plaque murale et serrer la vis.

6) Enlever la pellicule autocollante de l’écran s’il y

en a une.

7) Mettre le système de chauffage sous tension.

Vérifier l’installation en s’assurant que le

système de chauffage puisse être activé et

désactivé en augmentant et en diminuant la

température de consigne à l’aide des boutons

et .

Installation du thermostat

La page est en cours de chargement...

resideo TH305/H Mode d'emploi

Marque: resideo

Modèle: TH305/H

Catégorie: Thermostats

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: resideo TH305/H User guide

resideo TH305/H Mode d'emploi

resideo TH305/H Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents