Philips S9311/27 Manuel utilisateur

9000 series

S9721 / S9531 / S9311

4222.002.5880.1 S9721,S9531,S9311 COVER A6 FC_cHR.indd 1 10-03-16 10:34

1

2

3

4

14

15

22

23

24

25

26

7

9

8

10

5

11

6

13

12

17

16

18

20 21

19

empty page before TOC

English 6

Français (Canada) 34

English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Please read this user manual, as it contains

information about the features of this shaver as

well as some tips to make shaving easier and more

enjoyable.

General description (Fig. 1)

1 Click-on trimmer attachment

2 Click-on shaving unit

3 On/off button

4 Socket for small plug

5 Travel lock symbol

6 Charge symbol (S9721 only)

7 Personal comfort settings bar

8 Battery charge percentage (S9721 only)

9 + and - buttons for personal comfort settings

10 Battery charge indicator (S9531, S9311 only)

11 Cleaning reminder

12 Replacement reminder

13 Exclamation mark

14 SmartClean system

15 Cap of SmartClean system

16 On/off button

17 Replacement symbol

18 Cleaning symbol

19 Drying symbol

20 Ready symbol

21 Charge symbol

22 Cleaning cartridge for SmartClean system

23 Supply unit

24 Small plug

25 Retaining ring holder

26 Pouch

6

English

The accessories supplied may vary for different

products. The box shows the accessories that have

been supplied with your appliance.

Important safety information

Read this important information carefully before

you use the appliance and its accessories and

save it for future reference. The accessories

supplied may vary for different products.

Danger

- Keep the supply unit dry.

Warning

- To charge the battery, only use the detachable

supply unit (HQ8505) provided with the

appliance.

- The supply unit contains a transformer. Do not

cut off the supply unit to replace it with another

plug, as this causes a hazardous situation.

-

Children shall not play with the appliance.

Cleaning and

user maintenance shall not be

made by children without supervision.

- Always unplug the shaver before you clean it

under the tap.

7

English

- Always check the appliance before you use it.

Do not use the appliance if it is damaged, as

this may cause injury. Always replace a

damaged part with one of the original type.

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the cleaning system or the

charging stand in water and do not rinse it

under the tap.

- Never use water hotter than 80°C to rinse the

shaver.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the

appliance.

- If your shaver comes with a cleaning system,

always use the original Philips cleaning fluid

(cartridge or bottle, depending on the type of

cleaning system).

- Always place the cleaning system on a stable,

level and horizontal surface to prevent leakage.

- If your cleaning system uses a cleaning

cartridge, always make sure the cartridge

compartment is closed before you use the

cleaning system to clean or charge the shaver.

- When the cleaning system is ready for use, do

not move it to prevent leakage of cleaning fluid.

- Water may drip from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics are

enclosed in a sealed power unit inside the

shaver.

8

English

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener to

prevent irreparable damage to the supply unit.

Electromagnetic fields (EMF)

- This Philips appliance complies with all

applicable standards and regulations regarding

exposure to electromagnetic fields.

General

- This shaver is waterproof. It is suitable for use in

the bath or shower and for cleaning under the

tap. For safety reasons, the shaver can

therefore only be used without cord.

- The appliance is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

The display

Note: Before you use the shaver for the first time,

remove the protective foil from the display.

The various shaver types have different displays,

which are shown in the figures below.

S9721

S9531, S9311

9

English

Personal comfort settings

The appliance has a feature that allows you to

personalise your settings. You can choose

between three settings depending on your

personal shaving needs: comfort, dynamic or

efficiency. When you press the - or + button, the

segment of the personal comfort settings bar that

lights up shows the currently selected setting. You

can press the + or - button to select a different

setting.

Charging

S9721

When the shaver is charging, the battery charge

percentage and the battery symbol flash white.

The battery charge is indicated by the battery

charge percentage shown on the display.

Quick charge: When the battery symbol starts to

flash quickly, the shaver contains enough charge

for one shave.

S9531, S9311

Note: The displays of the various shaver types look

different, but the charging lights work in the same

way.

When the shaver is charging, first the bottom light

of the battery charge indicator flashes, then the

second light, and so on until the shaver is fully

charged.

Quick charge: When the bottom light stops flashing

and lights up continuously, the shaver contains

enough charge for one shave.

Battery fully charged

Note: This appliance can only be used without

cord. When you press the on/off button during or

10

English

after charging, you hear a sound to indicate that

the shaver is still connected to the wall socket.

Note: When the battery is full, the display switches

off automatically after 30 minutes.

S9721

When the battery is fully charged, the battery

charge percentage lights up white continuously.

S9531, S9311

Note: The displays of the various shaver types look

different, but the battery charge indicator works in

the same way.

When the battery is fully charged, all lights of the

battery charge indicator light up white

continuously.

Battery low

S9721

When the battery is almost empty, the battery

symbol flashes orange and you hear a sound.

S9531, S9311

Note: The displays of the various shaver types look

different, but the battery charge indicator works in

the same way.

When the battery is almost empty, the bottom light

of the battery charge indicator flashes orange and

you hear a sound.

11

English

Remaining battery charge

S9721

The remaining battery charge is indicated by the

battery charge percentage shown on the display.

S9531, S9311

The remaining battery charge is shown by the

lights of the battery charge indicator that light up

continuously.

Cleaning reminder

Note: The displays of the various shaver types look

different, but show the same symbol.

Clean the shaver after every shave for optimal

performance. When you switch off the appliance,

the cleaning reminder flashes to remind you to

clean the appliance.

Travel lock

You can lock the appliance when you are going to

travel. The travel lock prevents the appliance from

being switched on by accident.

Note: The displays of the various shaver types look

different, but show the same symbol.

Activating the travel lock

1 Press the on/off button for 3 seconds to enter

the travel lock mode.

12

English

While you activate the travel lock, the travel

lock symbol lights up white continuously. When

the travel lock is activated, the appliance

produces a sound and the travel lock symbol

flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

The travel lock symbol flashes and then lights

up continuously. The appliance is now ready for

use again.

Note: You can also deactivate the travel lock by

connecting the appliance to the wall socket.

Replacement reminder

For maximum shaving performance, we advise you

to replace the shaving heads once a year.

Note: The displays of the various shaver types look

different, but show the same symbol.

The appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The shaving unit symbol lights up

white continuously, the arrows flash white and the

appliance beeps to indicate that you have to

replace the shaving heads.

Note: After replacing the shaving heads, you need

to reset the replacement reminder by pressing the

on/off button for 7 seconds.

Exclamation mark

Note: The displays of the various shaver types look

different, but show the same symbol.

Overheating

13

English

If the appliance overheats during charging, the

exclamation mark flashes orange. When this

happens, the shaver switches off automatically.

Charging continues once the temperature of the

appliance has decreased to the normal level.

Blocked shaving heads

If the shaving heads are blocked, the exclamation

mark lights up orange continuously. The

replacement reminder and the cleaning reminder

flash white alternately and you hear a sound. In

this case, the motor cannot run because the

shaving heads are soiled or damaged.

If the shaving heads are soiled, you have to clean

them. If the shaving heads are damaged, you have

to replace them.

Charging

Charge the shaver before you use it for the first

time and when the display indicates that the

battery is almost empty.

S9721: The battery charge is indicated by the

battery charge percentage shown on the display.

When you connect the shaver to the wall socket,

you hear a sound.

Charging takes approx. 1 hour. A fully charged

shaver has a shaving time of up to 60 minutes

(S9721) or 50 minutes (S9531, S9311).

Note: You cannot use the appliance while it is

charging.

Charging with the supply unit

1 Make sure the appliance is switched off.

14

English

1

2

2 Put the supply unit in the wall socket and put

the small plug in the appliance.

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Charging in the SmartClean system

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket.

3 Press the top cap to be able to place the shaver

in the holder ('click').

4 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system.

1

2

3

5 Place the shaver in the holder (1), tilt the shaver

backwards (2) and press down the top cap to

connect the shaver (‘click’) (3).

Note: The battery symbol starts to flash to indicate

that the appliance is charging. When the battery is

fully charged, the battery symbol lights up

continuously.

Using the appliance

Note: This appliance can only be used without

cord.

15

English

Switching the appliance on and off

- To switch on the appliance, press the on/off

button once.

The display lights up for a few seconds.

- To switch off the appliance, press the on/off

button once.

The display lights up for a few seconds and

shows the remaining battery charge.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week)

and exclusively with this appliance for a period of

3 weeks.

Shaving tips

- Select your personal comfort settings (see ‘The

display’).

- To ensure the best result, we advise you to pre-

trim your beard if you have not shaved for 3

days or longer.

Dry shaving

1 Switch on the appliance.

The display lights up for a few seconds.

2 Move the shaving heads over your skin in

circular movements.

Note: Circular movements provide better

shaving results than straight movements.

16

English

3 Clean the appliance after use (see 'Cleaning

and maintenance').

Wet shaving

You can also use this appliance on a wet face with

shaving foam or shaving gel.

To shave with shaving foam or shaving gel, follow

the steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

6 Dry your face.

7 Clean the appliance after use (see 'Cleaning

and maintenance').

17

English

Note: Make sure you rinse all foam or shaving

gel off the appliance.

Using the click-on attachments

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your appliance.

Removing or attaching the click-on

attachments

1 Make sure the appliance is switched off.

2 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you

pull it off the appliance.

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the trimmer attachment

You can use the trimmer attachment to groom

your sideburns and moustache.

1 Attach the attachment to the appliance (‘click’).

2 Switch on the appliance.

The display lights up for a few seconds.

3 Hold the trimmer attachment perpendicular to

the skin and move the appliance downwards

while you exert gentle pressure.

4 Clean the attachment after use (see 'Cleaning

and maintenance').

18

English

Cleaning and maintenance

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your appliance.

Cleaning the shaver in the SmartClean system

SmartClean system Plus has two phases: the

rinsing phase and the drying phase.

Preparing the SmartClean system for use

Caution: Do not tilt the SmartClean system to

prevent leakage.

Note: Hold the SmartClean system while you

prepare it for use.

Note: If you clean the shaver in the SmartClean

system once a week, the SmartClean cartridge

lasts approximately three months.

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket.

2

1

3 Press the button on the side of the SmartClean

system (1) and lift the top part of the

SmartClean system (2).

4 Pull the seal off the cleaning cartridge.

19

English

5 Place the cleaning cartridge in the SmartClean

system.

6 Push the top part of the SmartClean system

back down (‘click’).

Using the SmartClean system

Caution: Always shake excess water off the

shaver before you place it in the SmartClean

system.

1 Press the top cap to be able to place the shaver

in the holder ('click').

2 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system.

20

English

La page charge ...

Philips S9311/27 Manuel utilisateur

Ce manuel convient également à

Philips S9311/27 Manuel utilisateur

dans d''autres langues

Documents connexes