2. Linksys
  3. WUSB6300
WUSB6300

Linksys WUSB6300 Mode d'emploi

  • Bonjour ! Je suis un chatbot IA spécialement formé pour vous aider avec le Linksys WUSB6300 Mode d'emploi. J’ai déjà parcouru le document et peux vous fournir des réponses claires et précises.
1
USER GUIDE
Wireless USB Adapter
AC 1200 Dual Band
WUSB6300
2
Contents
Product Overview ................................................................................................... 3
Installation ................................................................................................................. 4
Disable On-Board Wireless Card ....................................................................... 6
Troubleshooting ................................................................................................... 10
Your computer does not recognize the adapter. ....................................................................... 10
Your adapter’s light is off. ................................................................................................................. 10
Your computer cannot communicate with other computers on your Wi-Fi network. ... 10
Your computer uses its built-in wireless adapter to connect to your Wi-Fi network. .. 10
Specifications ....................................................................................................... 11
Linksys WUSB6300 ............................................................................................................................ 11
Environmental ........................................................................................................................................ 11
3
Product Overview
The WUSB6300 adapter upgrades Wi-Fi connectivity on your desktop or laptop computer.
Blue Lights
Power/Status
Slow
Blinking
Adapter is installed, but
not connected to the
internet
Fast
Blinking
Adapter is
transmitting/receiving
data
Security
Solid Password secure Wi-Fi
Off Unsecured public Wi-Fi
4
Installation
You’ll need to download and install drivers before using your adapter:
1. On a computer with an internet connection, visit
www.linksys.com/support/WUSB6300
in a web browser.
2. Click on Downloads/Firmware.
3. Choose Version 2.0.
4. Download the driver package for the version of your computer’s operating
system (Mac or Windows).
5. WIN: Unzip the folder and double-click the Setup.exe file and follow the on-
screen instructions.
MAC: Unzip the folder and double-click the Setup.pkg file and follow the on-
screen instructions.
If the computer you want to use the adapter with doesn’t have an internet
connection, find another computer that does, then:
1. Visit www.linksys.com/support/WUSB6300
in a web browser.
2. Click on Downloads/Firmware.
3. Choose Version 2.0.
5
4. Download the driver package for the version of your computer’s operating
system (Mac or Windows).
5. Save the folder to a removable storage device.
6. Eject the storage device and insert it into the computer you want to use with
the adapter.
7. Navigate to the drivers folder on the storage device,
8. WIN: Unzip the folder and double-click the Setup.exe file and follow the on-
screen instructions.
MAC: Unzip the folder and double-click the Setup.pkg file and follow the on-
screen instructions.
If you can’t set up your adapter with one of the above methods, visit linksys.com/support
for more options.
Use your computer’s network utility to connect to Wi-Fi with the adapter.
6
Disable On-Board Wireless Card
If your computer has an on-board wireless card, it’s a good idea disable it to prevent it
from interfering with the adapter’s access to Wi-Fi.
Windows 10 – Option 1
1. Click on in the System Tray in the right-side of the Windows Taskbar
2. Click on Network & Internet Settings
3. Click on Change Adaptoer options
7
4. In Network Connections, right-click on your wireless card and click “Disable”.
5. Click on in the System Tray in the right-side of the Windows Taskbar and
connect to the internet.
Windows – Option 2
1. Go to Device Manager
2. Right-click on your wireless card under “Network adapters” and click “Disable
device”.
3. Click on in the System Tray in the right-side of the Windows Taskbar and
connect to the internet.
8
Mac OSX
1. Go to System Preferences
2. Click on Network
9
3. Click “Turn Wi-Fi Off”
4. Click on the Wi-Fi card in the list of networking devices and click the – symbol at
the bottom of the list to disable and remove the Wi-Fi card.
10
Troubleshooting
Your computer does not recognize the adapter.
•
Make sure that the adapter is properly inserted into your computer’s USB port.
•
Connect the adapter into a different USB port.
Your adapter’s light is off.
•
Your adapter has been disabled.
•
Go to your computer’s network settings page and make sure the adapter was installed.
•
Enable the adapter.
Your computer cannot communicate with other computers
on your Wi-Fi network.
•
Make sure that the computers are powered on.
•
Make sure that the adapter is configured with the same Wi-Fi network name and wireless
security settings as the other computers on your Wi-Fi network.
Your computer uses its built-in wireless adapter to connect
to your Wi-Fi network.
• Turn off your computer’s built-in wireless adapter.
11
Specifications
Linksys WUSB6300
Model Name Dual-Band AC1200 Wi-Fi 5 USB Adapter
Model Number WUSB6300 V2
Standards
802.11a, 802.11b, 802.11g, 802.11n, 802.11ac,
802.
11h, Fast Roaming 802.11k/v/r (Windows 10 only)
Dynamic Frequency Selection
DFS is a spectrum-sharing mechanism that allows
wireless LANs (WLANs) to coexist with radar systems
Interface USB 3.0/2.0
Light Connection Status
Antennas 2 internal dual-band
Security Features
WEP, WPA Personal, WPA2 Personal
Security Key Bits Up to 128-bit encryption
OS requirements
Windows 8/8.1, Windows 8/8.1 64-bit, Windows 10
64-bit, Windows 10 32-bit, MAC OS v10.11 - 10.15
Environmental
Dimensions
89.6 x 29.8 x 10.8 mm
Unit Weight 14 g
Certifications
FCC, IC, CE, CB, Windows 8/8.1, Windows 10
Operating Temp. 32°F to 104°F (0°C to 40°C)
Storage Temp. -4°F to 140°F (-20°C to 60°C)
Operating Humidity 10% to 80% relative humidity, non-condensing
Storage Humidity 5% to 90% non-condensing
Specifications are subject to change without notice.
12
N
otes:
For regulatory, warranty, and safety information, see the CD that came with your USB adapter or
go to Linksys.com/support/wusb6300.
Specifications are subject to change without notice.
Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance
can vary, including lower Wi-Fi network capacity, data throughput rate, range and coverage.
Performance depends on many factors, conditions and variables, including distance from the
access point, volume of network traffic, building materials and construction, operating system
used, mix of wireless products used, interference and other adverse conditions.
BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of
companies. Third-party trademarks mentioned are the property of their respective owners.
Licenses and notices for third party software used in this product may be viewed here:
http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-
us/gplcodecenter for questions or GPL source code requests.
© 2020 Belkin International, Inc. and/or its affiliates. All rights reserved.
1
GUÍA DEL USUARIO
Adaptador USB
inalámbrico
AC1200 de doble banda
WUSB6300
2
Contenido
Descripción general del producto ..................................................................... 3
Instalación ................................................................................................................. 4
Deshabilitar la tarjeta inalámbrica en placa .................................................. 6
Resolución de problemas .................................................................................. 10
El ordenador no reconoce el adaptador. ...................................................................................... 10
La luz de tu adaptador está apagada. ........................................................................................... 10
Tu ordenador no puede comunicarse correctamente con los otros equipos de tu red
WiFi. ........................................................................................................................................................... 10
Tu ordenador usa el adaptador integrado para conectar a tu red WiFi............................. 10
Especificaciones .................................................................................................. 11
Linksys WUSB6300 ............................................................................................................................ 11
Características físicas ........................................................................................................................ 11
3
Descripción general del producto
El adaptador WUSB6300 mejora la conectividad WiFi de tu ordenador de escritorio o portátil.
Luces azules
Encendido/estado
Parpadeando
lentamente
El adaptador está
instalado pero no tiene
conexión a internet
Parpadeando
rápidamente
El adaptador está
transmitiendo/recibiendo
datos
Seguridad
Encendidas
fijas
WiFi segura con
contraseña
Deshabilitado WiFi pública no segura
4
Instalación
Antes de usar el adaptador tendrás que descargar e instalar los controladores:
1. En un ordenador con conexión a internet visita
www.linksys.com/support/WUSB6300
en un explorador web.
2. Haz clic en Descargas/Firmware
3. Escoge Versión 2.0
4. Descarga el paquete de drivers para la versión del sistema operativo que
tengas en tu ordenador (Mac o Windows).
5. Windows: descomprime la carpeta, haz doble clic en el archivo Setup.exe y
sigue las instrucciones que aparecen en la pantalla.
Mac: descomprime la carpeta, haz doble clic en el archivo Setup.pkg y sigue las
instrucciones en pantalla.
Si el ordenador en el que quieres usar el adaptador no dispone de conexión a internet
busca otro que sí tenga y, a continuación:
1. Visita www.linksys.com/support/WUSB6300
en un explorador web.
2. Haz clic en Descargas/Firmware
3. Escoge Versión 2.0
5
4. Descarga el paquete de drivers para la versión del sistema operativo que
tengas en tu ordenador (Mac o Windows).
5. Guarda la carpeta en un dispositivo de almacenamiento extraíble.
6. Extrae el dispositivo de almacenamiento y conéctalo al ordenador en el que
quieres usar el adaptador.
7. Ve a la carpeta de controladores del dispositivo de almacenamiento.
8. Windows: descomprime la carpeta, haz doble clic en el archivo Setup.exe y
sigue las instrucciones que aparecen en la pantalla.
Mac: descomprime la carpeta, haz doble clic en el archivo Setup.pkg y sigue las
instrucciones en pantalla.
Si no puedes instalar tu adaptador con uno de los métodos de arriba visita
linksys.com/support para ver más opciones.
Usa la herramienta de red de tu ordenador para conectarte a la WiFi con el
adaptador.
6
Deshabilitar la tarjeta inalámbrica en placa
Si tu ordenador tiene una tarjeta inalámbrica integrada en la placa es una buena idea
deshabilitarla para prevenir que pueda interferir con el acceso a la WiFi del adaptador.
Windows 10 - Opción 1
1. Haz clic en en la bandeja del sistema en el lado derecho de la barra de tareas
de Windows
2. Haz clic en Ajustes de redes e internet
3. Haz clic en Cambiar adaptador
7
4. En Conexiones de red, haz clic con el botón derecho en la tarjeta inalámbrica y, a
continuación, haz clic en «Deshabilitar».
5. Haz clic en en la bandeja del sistema en el lado derecho de la bandeja de
tareas de Windows y conéctate a internet.
Windows - Opción 2
1. Ve al Administrador de dispositivos
2. Haz clic con el botón derecho en tu tarjeta inalámbrica bajo «Adaptadores de red»
y, a continuación, haz clic en «Deshabilitar dispositivo».
8
3. Haz clic en en la bandeja de sistema en el lado derecho de la barra de tarea de
Windows y conecta a internet.
Mac OSX
1. Ir s Preferencias del sistema
2. Haz clic en Red
/