Linksys WUSB6300 Mode d'emploi

1

USER GUIDE

Wireless USB Adapter

AC 1200 Dual Band

WUSB6300

2

Contents

Product Overview ................................................................................................... 3

Installation ................................................................................................................. 4

Disable On-Board Wireless Card ....................................................................... 6

Troubleshooting ................................................................................................... 10

Your computer does not recognize the adapter. ....................................................................... 10

Your adapter’s light is off. ................................................................................................................. 10

Your computer cannot communicate with other computers on your Wi-Fi network. ... 10

Your computer uses its built-in wireless adapter to connect to your Wi-Fi network. .. 10

Specifications ....................................................................................................... 11

Linksys WUSB6300 ............................................................................................................................ 11

Environmental ........................................................................................................................................ 11

3

Product Overview

The WUSB6300 adapter upgrades Wi-Fi connectivity on your desktop or laptop computer.

Blue Lights

Power/Status

Slow

Blinking

Adapter is installed, but

not connected to the

internet

Fast

Blinking

Adapter is

transmitting/receiving

data

Security

Solid Password secure Wi-Fi

Off Unsecured public Wi-Fi

4

Installation

You’ll need to download and install drivers before using your adapter:

1. On a computer with an internet connection, visit

www.linksys.com/support/WUSB6300

in a web browser.

2. Click on Downloads/Firmware.

3. Choose Version 2.0.

4. Download the driver package for the version of your computer’s operating

system (Mac or Windows).

5. WIN: Unzip the folder and double-click the Setup.exe file and follow the on-

screen instructions.

MAC: Unzip the folder and double-click the Setup.pkg file and follow the on-

screen instructions.

If the computer you want to use the adapter with doesn’t have an internet

connection, find another computer that does, then:

1. Visit www.linksys.com/support/WUSB6300

in a web browser.

2. Click on Downloads/Firmware.

3. Choose Version 2.0.

5

4. Download the driver package for the version of your computer’s operating

system (Mac or Windows).

5. Save the folder to a removable storage device.

6. Eject the storage device and insert it into the computer you want to use with

the adapter.

7. Navigate to the drivers folder on the storage device,

8. WIN: Unzip the folder and double-click the Setup.exe file and follow the on-

screen instructions.

MAC: Unzip the folder and double-click the Setup.pkg file and follow the on-

screen instructions.

If you can’t set up your adapter with one of the above methods, visit linksys.com/support

for more options.

Use your computer’s network utility to connect to Wi-Fi with the adapter.

6

Disable On-Board Wireless Card

If your computer has an on-board wireless card, it’s a good idea disable it to prevent it

from interfering with the adapter’s access to Wi-Fi.

Windows 10 – Option 1

1. Click on in the System Tray in the right-side of the Windows Taskbar

2. Click on Network & Internet Settings

3. Click on Change Adaptoer options

7

4. In Network Connections, right-click on your wireless card and click “Disable”.

5. Click on in the System Tray in the right-side of the Windows Taskbar and

connect to the internet.

Windows – Option 2

1. Go to Device Manager

2. Right-click on your wireless card under “Network adapters” and click “Disable

device”.

3. Click on in the System Tray in the right-side of the Windows Taskbar and

connect to the internet.

8

Mac OSX

1. Go to System Preferences

2. Click on Network

9

3. Click “Turn Wi-Fi Off”

4. Click on the Wi-Fi card in the list of networking devices and click the – symbol at

the bottom of the list to disable and remove the Wi-Fi card.

10

Troubleshooting

Your computer does not recognize the adapter.

•

Make sure that the adapter is properly inserted into your computer’s USB port.

•

Connect the adapter into a different USB port.

Your adapter’s light is off.

•

Your adapter has been disabled.

•

Go to your computer’s network settings page and make sure the adapter was installed.

•

Enable the adapter.

Your computer cannot communicate with other computers

on your Wi-Fi network.

•

Make sure that the computers are powered on.

•

Make sure that the adapter is configured with the same Wi-Fi network name and wireless

security settings as the other computers on your Wi-Fi network.

Your computer uses its built-in wireless adapter to connect

to your Wi-Fi network.

• Turn off your computer’s built-in wireless adapter.

11

Specifications

Linksys WUSB6300

Model Name Dual-Band AC1200 Wi-Fi 5 USB Adapter

Model Number WUSB6300 V2

Standards

802.11a, 802.11b, 802.11g, 802.11n, 802.11ac,

802.

11h, Fast Roaming 802.11k/v/r (Windows 10 only)

Dynamic Frequency Selection

DFS is a spectrum-sharing mechanism that allows

wireless LANs (WLANs) to coexist with radar systems

Interface USB 3.0/2.0

Light Connection Status

Antennas 2 internal dual-band

Security Features

WEP, WPA Personal, WPA2 Personal

Security Key Bits Up to 128-bit encryption

OS requirements

Windows 8/8.1, Windows 8/8.1 64-bit, Windows 10

64-bit, Windows 10 32-bit, MAC OS v10.11 - 10.15

Environmental

Dimensions

89.6 x 29.8 x 10.8 mm

Unit Weight 14 g

Certifications

FCC, IC, CE, CB, Windows 8/8.1, Windows 10

Operating Temp. 32°F to 104°F (0°C to 40°C)

Storage Temp. -4°F to 140°F (-20°C to 60°C)

Operating Humidity 10% to 80% relative humidity, non-condensing

Storage Humidity 5% to 90% non-condensing

Specifications are subject to change without notice.

12

N

otes:

For regulatory, warranty, and safety information, see the CD that came with your USB adapter or

go to Linksys.com/support/wusb6300.

Specifications are subject to change without notice.

Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance

can vary, including lower Wi-Fi network capacity, data throughput rate, range and coverage.

Performance depends on many factors, conditions and variables, including distance from the

access point, volume of network traffic, building materials and construction, operating system

used, mix of wireless products used, interference and other adverse conditions.

BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of

companies. Third-party trademarks mentioned are the property of their respective owners.

Licenses and notices for third party software used in this product may be viewed here:

http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-

us/gplcodecenter for questions or GPL source code requests.

1

GUÍA DEL USUARIO

Adaptador USB

inalámbrico

AC1200 de doble banda

WUSB6300

2

Contenido

Descripción general del producto ..................................................................... 3

Instalación ................................................................................................................. 4

Deshabilitar la tarjeta inalámbrica en placa .................................................. 6

Resolución de problemas .................................................................................. 10

El ordenador no reconoce el adaptador. ...................................................................................... 10

La luz de tu adaptador está apagada. ........................................................................................... 10

Tu ordenador no puede comunicarse correctamente con los otros equipos de tu red

WiFi. ........................................................................................................................................................... 10

Tu ordenador usa el adaptador integrado para conectar a tu red WiFi............................. 10

Especificaciones .................................................................................................. 11

Linksys WUSB6300 ............................................................................................................................ 11

Características físicas ........................................................................................................................ 11

3

Descripción general del producto

El adaptador WUSB6300 mejora la conectividad WiFi de tu ordenador de escritorio o portátil.

Luces azules

Encendido/estado

Parpadeando

lentamente

El adaptador está

instalado pero no tiene

conexión a internet

Parpadeando

rápidamente

El adaptador está

transmitiendo/recibiendo

datos

Seguridad

Encendidas

fijas

WiFi segura con

contraseña

Deshabilitado WiFi pública no segura

4

Instalación

Antes de usar el adaptador tendrás que descargar e instalar los controladores:

1. En un ordenador con conexión a internet visita

www.linksys.com/support/WUSB6300

en un explorador web.

2. Haz clic en Descargas/Firmware

3. Escoge Versión 2.0

4. Descarga el paquete de drivers para la versión del sistema operativo que

tengas en tu ordenador (Mac o Windows).

5. Windows: descomprime la carpeta, haz doble clic en el archivo Setup.exe y

sigue las instrucciones que aparecen en la pantalla.

Mac: descomprime la carpeta, haz doble clic en el archivo Setup.pkg y sigue las

instrucciones en pantalla.

Si el ordenador en el que quieres usar el adaptador no dispone de conexión a internet

busca otro que sí tenga y, a continuación:

1. Visita www.linksys.com/support/WUSB6300

en un explorador web.

2. Haz clic en Descargas/Firmware

3. Escoge Versión 2.0

5

4. Descarga el paquete de drivers para la versión del sistema operativo que

tengas en tu ordenador (Mac o Windows).

5. Guarda la carpeta en un dispositivo de almacenamiento extraíble.

6. Extrae el dispositivo de almacenamiento y conéctalo al ordenador en el que

quieres usar el adaptador.

7. Ve a la carpeta de controladores del dispositivo de almacenamiento.

8. Windows: descomprime la carpeta, haz doble clic en el archivo Setup.exe y

sigue las instrucciones que aparecen en la pantalla.

Mac: descomprime la carpeta, haz doble clic en el archivo Setup.pkg y sigue las

instrucciones en pantalla.

Si no puedes instalar tu adaptador con uno de los métodos de arriba visita

linksys.com/support para ver más opciones.

Usa la herramienta de red de tu ordenador para conectarte a la WiFi con el

adaptador.

6

Deshabilitar la tarjeta inalámbrica en placa

Si tu ordenador tiene una tarjeta inalámbrica integrada en la placa es una buena idea

deshabilitarla para prevenir que pueda interferir con el acceso a la WiFi del adaptador.

Windows 10 - Opción 1

1. Haz clic en en la bandeja del sistema en el lado derecho de la barra de tareas

de Windows

2. Haz clic en Ajustes de redes e internet

3. Haz clic en Cambiar adaptador

7

4. En Conexiones de red, haz clic con el botón derecho en la tarjeta inalámbrica y, a

continuación, haz clic en «Deshabilitar».

5. Haz clic en en la bandeja del sistema en el lado derecho de la bandeja de

tareas de Windows y conéctate a internet.

Windows - Opción 2

1. Ve al Administrador de dispositivos

2. Haz clic con el botón derecho en tu tarjeta inalámbrica bajo «Adaptadores de red»

y, a continuación, haz clic en «Deshabilitar dispositivo».

8

3. Haz clic en en la bandeja de sistema en el lado derecho de la barra de tarea de

Windows y conecta a internet.

Mac OSX

1. Ir s Preferencias del sistema

2. Haz clic en Red

La page est en cours de chargement...

Linksys WUSB6300 Mode d'emploi

Linksys WUSB6300 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents