Wincor Nixdorf KA14 Base Cash Drawer Mode d'emploi
- Taper
- Mode d'emploi
KA14
Base Cash Drawer
Product Manual
Edition April 2000
BEETLE® is a registered trademark of the Wincor Nixdorf GmbH & Co. KG
Copyright © Wincor Nixdorf GmbH & Co. KG, 2000
The reproduction, transmission or use of this document or its contents is not permitted
without express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability; technical modifications possible.
Contents
Manufacturer’s Declaration and Approval..............................................1
FCC-Class A Declaration..........................................................................1
Notes on maintenance ..............................................................................1
KA14 Base Cash Drawer...........................................................................2
General......................................................................................................2
Mounting the cash drawer.........................................................................6
Opening the cash drawer ..........................................................................7
Emergency opening of the cash drawer ...................................................7
Emergency opening of an unmounted cash drawer .................................8
Setting the travel distance.........................................................................9
The money tray........................................................................................10
Using the money compartments .............................................................10
Removing the money tray from the housing...........................................11
Connection system..................................................................................12
Technical data .........................................................................................14
Manufacturer’s Declaration and Approval
The device complies with the requirements of the EEC
directives 89/336/EEC with regard to “Electromagnetic
compatibility” and 73/23/EEC “Low Voltage Directive”.
Therefore, you will find the CE mark on the device or
packaging.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfe-
rence at his own expense.
Le présent appareil numérique ne génère pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la “Classe
A” prescrites dans le Règlement sur le brouillage radioélectrique édicté
par le ministère des Communications du Canada.
D-1
Important notes
➜ The device may be repaired by authorized qualified personnel only.
Unauthorized opening of the device and inexpertly carried-out repairs
may not only seriously jeopardize the safety of the user, but also can-
cel all warranty and liability agreements.
➜ Never plug in or unplug data communication lines during thunder-
storms.
➜ Protect devices from vibrations, dust, moisture and heat.
➜ Please dispose of the device in an environmentally safe manner
when it has served its time.
Notes on maintenance
Wipe off the cash drawer with a damp cloth when needed.Never use sol-
vents, since these corrode the plastic.
D-2
KA14 Base Cash Drawer
General
The KA14 Base Cash Drawer is designed as a base drawer for installation
in a checkout desk or under the POS system. It can be connected directly
to the cash drawer interface provided on the POS 2000/10 and BEETLE
systems. The drawer opens out toward the front and can be supplied with
or without a check slot.
Base drawer with lock and check compartment
D-3
The width of the bank note compartments is variable, allowing them to be
adjusted to different bank note sizes (currencies).Altogether the KA14
Base Cash Drawer has 8 large coin compartments (or 7 in the version
with a check compartment), 4 compartments for bank notes and 3 com-
partments for checks, bank notes, documents or coin rolls. General
The cash drawer is available with three different locking options:
■ Without lock
This drawer cannot be opened mechanically with a key.
■ With lock and key for opening cash drawer (unlatchable)
■ With lock and key for locking cash drawer only
Furthermore, the base cash drawer is available in two versions:
■ Without check slot (standard)
■ With check slot (special)
Checks can be placed in the check compartment by inserting them
through the check slot, without opening the drawer.
General
D-4
Thus, the following variants of the base cash drawer are available:
KA14 Base Cash Drawer
without check slot
(standard)
KA14 Basic Cash
Drawer with check
slot
(special)
Without lock
Base cash drawer
(standard/security)
Base cash drawer
(special/security)
Unlatchable
Base cash drawer
(standard/unlatchable)
Base cash drawer
(special/unlatchable
)
Lockable
Base cash drawer
(standard/lockable)
Base cash drawer
(special/lockable)
An optional cover is available for the versions with and without a check slot
for closing the money tray for security reasons, e.g.during transport:
■ Short cover for money tray, standard
■ Long cover for money tray, special
General
D-5
Mounting the cash drawer
Mounting the Cash Drawer
The cash drawer can be mounted on the checkout desk by means of two
M4 bolts. The length of the bolts must correspond to the thickness of the
desk plus max. 10 mm, but no less than 8 mm, for the bottom of the cash
drawer.The bore size must be 6 mm.
484
550
23
1 mm
1 mm
438
347
±
±
Mounting the Cash Drawer
D-6
Opening the cash drawer
Generally speaking, the opening of the cash drawer is triggered by the
software.If this ever becomes impossible, e.g.due to a power failure, there
are two options for opening the drawer manually and gaining access to the
cash box:
Emergency opening of the cash drawer
Emergency opening of the cash drawer
Remove the cable co-
ver from the back of
thecashdrawer.
The plate with the
IN/OUT label is now
visible.
Emergency opening of the cash drawer
D-7
Using a small
screwdriver, move
the IN/OUT plate to
the left.
Open the plate.
Two black sliding
switches are now ex-
posed. Move one of
the two sliding swit-
ches to the left to
open the cash dra-
wer.
Press the plate in until it snaps into place, making sure that the mounting
screws are aligned with the notches in the plate.
Emergency opening of an unmounted cash drawer
To open the cash dra-
wer, insert a small
screwdriver from be-
low in the hole in the
center of the metal
plate. Move the
screwdriver sidways
to open the drawer.
Emergency opening of the cash drawer
D-8
Setting the travel distance
Setting the TravelDistance
Pull the drawer out
all the way to the
stops, lift it over the
stops and remove it.
Spring pins are loca-
ted on the right- and
left-hand sides inside
thecashdrawerhou-
sing.
Pull the spring over
the spring pin careful-
ly because it is only
loosely hung in the
back.
Remove the spring
pin and insert it in the
desired opening.
Carefully place the
end of the spring on
spring pin.
Setting the Travel Distance
D-9
The money tray
The Money Tray
The money tray comprises two units.The front unit is for coins and bank
notes and the rear unit is for storing coin rolls, checks or over-ring receipts.
In the case of a money tray with a check compartment, the two units are
bolted together.
Money tray with check compartment Money tray without check compartment
Lockable covers are available for both variants - money tray with check
compartment and money tray without check compartment. Either a short
or long cover can be used, depending on the money tray.
Using the money compartments
The drawer can be pulled out to the first (soft) stop.The coin and bank
note compartments are now accessible.When the drawer is pulled out to
the second stop, the rear compartment can be accessed in order to store
any larger bank note denominations or checks.
The individual compartments can be adjusted to different bank note sizes
by moving the dividers.
The Money Tray
D-10
Removing the money tray from the housing.
In order to remove
themoneytrayfrom
the housing, first sli-
de it to the end of the
drawer.
Hold the cover with
one hand and pull up
on the money tray
with the other.
Replace the money drawer by following the steps above in reverse order.
Make sure that the tray is pushed under the edge of the front cover or the
drawer will not close!
The Money Tray
D-11
Connection system
Connection System
The base cash drawer is connected directly to the cash drawer interface
provided on POS 2000/10 and BEETLE systems.The base cash drawer
connecting cable plugs into a 7-pin circular jack at the cash-drawer end
and a 6-pin mini-DIN jack at the BEETLE system.The cable for connecting
the base cash drawer to the POS 2000/10 system plugs into a 7-pin circu-
lar jack at each end. Power (12/24 V) is also supplied via this cable.
6-pin mini-DIN jack 7-pin circular jack at the cash drawer
at the BEETLE system: and at the POS 2000/10 system:
Pin Signal Pin Signal
1KLA11
2 LAZU1 2 LAZU2
3 GND 3 LAZU1
4KLA24KLA1
5 LAZU2 5 KLA2
6
+12V bis
+24V
6
+12V
bis
+24V
7 GND
Connection System
D-12
6-pin mini-DIN jack 7-pin circular jack
Meaning of the signals
LAZU1 Drawer 1 closed
LAZU2 Drawer 2 closed
KLA1 Drawer 1 open
KLA2 Drawer 2 open
+ 12V to + 24V Supply voltage
GND Ground
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Connection System
D-13
Technical data
Technical Data
Height 93 mm ± 1mm
Width 484 mm ± 1 mm
Depth 550 mm ± 1mm
Travel - 1st stage Approx.295 mm
Travel - 2nd stage Approx.380 mm
Weight
8.2 kg
Power supply
+ 12 V DC -10% to
+ 24 V DC +10%
Continuous current
50 mA
Ports
6-pin mini-DIN jack
to BEETLE system
7-pin circular connector
to cash drawer and to POS
2000/10 system
Technical Data
D-14
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Wincor Nixdorf KA14 Base Cash Drawer Mode d'emploi
- Taper
- Mode d'emploi
dans d''autres langues
Documents connexes
Autres documents
-
Casio CE-2300 Operator's Instruction Manual
-
Royal Sovereign RCRD-1616M Le manuel du propriétaire
-
-
mothercare ELC Electronic Cash Register 142528_142529 Mode d'emploi
-
-
Casio TE-2400 Mode d'emploi
-
-
Diebold Nixdorf BEETLE A1050 Le manuel du propriétaire
-