DHP Furniture FH7867 Manuel utilisateur

Model Number: UPC Code:

DA7867

0-65857-17806-7

Date of Purchase: _____ / _____ / _____ Lot Number:

(taken from carton)

Kitchen Island with 2 Stools

Congratulations on your latest furniture purchase! Dorel Living furniture has been developed

with quality, convenience and style in mind. We trust it will provide you with many years of

exceptional comfort and service.

Before beginning assembly, we encourage you to familiarize yourself with your new furniture

piece by taking a few minutes to go through this booklet. It contains important information on

our warranty and care tips to keep your furniture looking as good as new.

Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to

Friday 8am to 5pm (EST) to answer any question you may have. For faster service, always

have the model number ready when calling our toll free number 1-800-295-1980 or emailing us

at [email protected] .

For more great furniture ideas, check out our website at www.dorelliving.com

You can also keep up to date on all the latest trends by liking our Facebook page.

DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our

customer service department. We will replace the part FREE of charge.

NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

* Ensure that all parts and components are located before beginning assembly.

* Assemble on a soft surface to prevent damage to the product finish.

* DO NOT use the unit if it is damaged or broken.

* DO NOT use power tools.

* Caution: Adult assembly required.

* Assembly will require 2 people.

* Estimated assembly time: 60 minutes.

* Phillips head screwdriver (not provided) is required for assembly.

CARE AND CLEANING

Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to

clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to

sunlight and extreme changes in temperature and moisture can damage wood furniture.

LIMITED WARRANTY

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect.

This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof of

purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is

included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or

abuse or which has been altered or repaired in any way. This warranty gives you specific legal rights and you may also

have other rights which vary from State to State.

NOTE

Montreal, Quebec

WARNING: Should this product become damaged, and/or

components are broken or missing, DO NOT USE.

MAINTENANCE

Check bolts/screws periodically and tighten them if necessary.

E-MAIL: [email protected]

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customer service representative first!

CALL 1-800-295-1980

You can also order parts by writing to the address listed below. Please include the product model number, color and a

detailed description of the part.

Canada H1G 3L1

HARDWARE LIST

Kitchen Island with 2 Stools

DA7867

1

2

3

∅5/32"*1"

CAM BOLT

CAM LOCK

FLAT HEAD SCREW

28 PCS

16 PCS

4

5

6

M4

∅8*30mm

∅5/32"*7/8"

ALLEN KEY

WOOD DOWEL

ROUND HEAD BOLT

1 PC

18 PCS

3 PCS

7

8

9

∅1/8"x12mm

PLATE

FLAT HEAD SCREW

KNOB

∅32*20mm

1 PC

2 PCS

3 PCS

HARDWARE LIST

Kitchen Island with 2 Stools

DA7867

10

11

12

∅5/32"*5/8"

DRAWER STOPPER

ROUND HEAD SCREW

SHELF SUPPORT

2 PCS

8 PCS

13

14

15

∅1/4"*1/2"

∅1/4"*1"

∅1/8"*1/2"

BOLT

ROUND HEAD SCREW

34 PCS

3 PCS

2 PCS

LEFT SIDE PANEL

RIGHT SIDE PANEL

UPPER RAIL

E

F

Kitchen Island with 2 Stools

D

PARTS LIST

A

B

BOTTOM RAIL

MIDDLE PANEL

DA7867

C

BACK PANEL

BUN FOOT

SUPPORT LEG

1 PC

4 PCS

1 PC

G

H

1 PC

I

BOTTOM PANEL

Kitchen Island with 2 Stools

DA7867

PARTS LIST

J

K

L

VERTICAL PANEL

UPPER PANEL

FRONT UPPER RAIL

1 PC

M

N

O

TOP PANEL

ADJUSTABLE SHELF

DOOR PANEL

1 PC

2 PCS

1 PC

P

Q

R

DRAWER FRONT

DRAWER SIDE

DRAWER BACK

2 PCS

4 PCS

2 PCS

Kitchen Island with 2 Stools

DA7867

PARTS LIST

S

T

U

DRAWER BOTTOM

TOWEL RACK

METAL SUPPORT

2 PCS

1 PC

3 PCS

V

W

X

SEAT BOARD

SEAT FRAME

STRETCHER FRAME

2 PCS

Y

LEG

8 PCS

STEP 1

Kitchen Island with 2 Stools

DA7867

Attach drawer sides (Q) to drawer front (P) with flat head screws (3). Slide drawer bottom (S) into

the grooves of the drawer sides (Q) and drawer front (P).

Attach drawer back (R) to drawer sides (Q) with flat head screws (3). Make sure the drawer bottom

(S) fit into the groove of the drawer back (R).

Attach knob (9) to drawer front (P) with bolt (6). Use Phillips head screwdriver (not included) to

install the bolt (6) and screws (3).

STEP 2

Kitchen Island with 2 Stools

DA7867

Insert cam bolts (1) into right side panel (B).

Insert cam locks (2) into the upper rail (C) and bottom rail (E) as shown

Attach upper rail (C) and bottom rail (E) to right side panel (B) and secure by rotating cam locks (2)

1/2-turn clockwise using Phillips head screwdriver (not included).

Slide back panel (D) into the grooves of the rails (C & E) and right side panel (B).

STEP 3

Kitchen Island with 2 Stools

DA7867

Insert cam bolts (1) and wood dowels (5) into right side panel (B).

Insert cam locks (2) into the middle panel (F).

Attach middle panel (F) to right side panel (B) and secure by rotating cam locks (2) 1/2-turn

clockwise using Phillips head screwdriver (not included).

STEP 4

Kitchen Island with 2 Stools

DA7867

Attach the left side panel (A) to the assembled unit as shown below and secure by rotating cam locks

(2) 1/2-turn clockwise using Phillips head screwdriver (not included).

Insert cam bolts (1) into left side panel (A).

Insert cam locks (2) into the middle panel (F), upper rail (C) and bottom rail (E) as shown below.

Insert wood dowels (5) into the middle panel (F).

STEP 5

Attach upper panel (K) to the middle panel (F) and secure by rotating cam locks (2) 1/2-turn

clockwise using Phillips head screwdriver ( not included).

Kitchen Island with 2 Stools

DA7867

Insert cam bolts (1) and wood dowels (5) into middle panel (F).

Insert cam locks (2) into the upper panel (K).

STEP 6

Kitchen Island with 2 Stools

DA7867

Use Allen key (4) to tighten the bolts (14).

Attach front upper rail (L) to left and right side panels (A & B) and upper panel (K) with bolts

(14) as shown.

STEP 7

Insert cam bolts (1) and wood dowels (5) into middle panel (F) with a Phillips head screwdriver (not

included).

Attach vertical panel (J) to the middle panel (F) and secure by rotating cam locks (2) 1/2-turn

clockwise using a Phillips head screwdriver (not included).

Kitchen Island with 2 Stools

DA7867

Insert cam locks (2) into the vertical panel (J).

With the help of another person, turn the assembled unit upside down.

STEP 8

Attach bottom panel (G) to vertical panel (J) and side panels (A & B) and secure by rotating cam

locks (2) 1/2-turn clockwise using Phillips head screwdriver (not included).

Kitchen Island with 2 Stools

DA7867

Insert cam bolts (1) into bottom panel (G) with a Phillips head screwdriver (not included.)

Insert cam locks (2) into vertical panel (J), and side panels (A & B) as shown.

Insert wood dowels (5) into side panels (A & B) and the vertical panel (J).

STEP 9

Install bun feet (H) and support leg (I) to bottom panel (G) by rotating clockwise.

Kitchen Island with 2 Stools

DA7867

With the help of another person, turn the unit upright.

STEP 10

Kitchen Island with 2 Stools

DA7867

Insert cam bolts (1) into top panel (M).

Attach top panel (M) to the upper panel (K) and side panels (A & B) and secure by rotating cam locks (2)

1/2-turn clockwise using a Phillips head screwdriver (not included).

Attach drawer stops (10) to the middle panel (F) with round head screws (15) and a Phillips head

screwdriver (not included).

Insert cam locks (2) into upper panel (K) and side panels (A &B) as shown.

Insert wood dowels (5) into side panels (A & B).

15

STEP 11

Attach knob (9) to door panel (O) with bolt (6).

Attach metal plate (7) to door panel (O) with flat head screws (8).

Install door (O) by pushing down the door pins and inserting the door into the holes on middle panel

(F) and bottom panel (G).

Kitchen Island with 2 Stools

DA7867

STEP 12

Insert the previously assembled drawers into the unit.

Insert shelf supports (12) into the holes on the side panels (A & B) and vertical panel (J).

Place adjustable shelves (N) onto the shelf supports (12) as shown below.

Kitchen Island with 2 Stools

DA7867

STEP 13

Kitchen Island with 2 Stools

DA7867

Use Allen key (4) to tighten the bolts (13).

Attach metal support (U) to side panels (A & B) and upper rail (C) with bolts (13).

Attach towel rack (T) to left side panel (A) with bolts (13).

La page charge ...

DHP Furniture FH7867 Manuel utilisateur

Ce manuel convient également à

DHP Furniture FH7867 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents