Netgear Mobile Hotspot AirCard Le manuel du propriétaire

Taper
Le manuel du propriétaire
Quick Start
AirCard 790
Mobile Hotspot
2
English .......................................1
Deutsch .....................................18
Français .....................................34
Italiano ......................................50
Español......................................66
Svenska .....................................82
Русский .....................................98
Suomi ......................................114
Contents / Inhalt / Table des matières /
Sommario / Contenido / Содержание /
Sisältö / Innehåll
3
Meet Your Hotspot
Before you connect your mobile hotspot,
familarize yourself with its LCD screen,
icons, buttons, and connectors.
Buttons and Connectors
Micro-USB port
Primary antenna connector
Power button
English
4
LCD Screen
You can use the touch screen icons
and other screen elements to view the
mobile hotspot’s status, configure WiFi
band settings, view data usage details, and
view system alerts.
You can also view alerts and notifications by
swiping downward from the ALERTS icon
at the top of the screen. Scroll across to
view multiple alerts.
5
Icon Description
Signal
strength
5 bars. Excellent.
1 bar. Low level.
Network
type
4G. An LTE network is
available.
H+. DC-HSPA+ HSPA+/DC
HSPA.
H. HSPA.
3G. UMTS.
Trac Outline. Connected.
Solid. Sending or receiving.
None. Not connected.
Cradle Appears when the hotspot
is docked in a cradle (sold
separately).
Battery
level
5 bars. Fully charged.
1 bar. Battery low.
6
WiFi Name and WiFi
Password
You can change the WiFi name (SSID) and
WiFi password (security key) to your own
preferences by tapping the WiFi icon on
your mobile hotspot’s screen or through the
mobile hotspot web page.
Quick Reference Section
Default WiFi name
(SSID)
Displayed on the
front screen of your
mobile hotspot when
it is powered on, and
under the battery.
Default WiFi
password (security
key)
Case-sensitive and
displayed on the
front screen of your
mobile hotspot when
it is powered on, and
under the battery.
Mobile hotspot web
page
http://netgear.aircard
Mobile hotspot web
page password
password
7
Getting Connected
Before you connect to your mobile hotspot,
you must insert a micro-SIM card (3FF),
install the battery, power on the
mobile hotspot, and charge your battery.
Note: To obtain a micro-SIM card, contact
your Internet service provider.
¾ To insert the micro-SIM card:
1. Remove the back cover using the
thumb catch on the corner of the
mobile hotspot.
2. Remove the battery.
3. Slide the micro-SIM card into the slot
with the gold colored contacts facing
down.
4. Ensure that the micro-SIM card is
seated securely.
5. Reinsert the battery.
6. Replace the cover.
8
¾ To power on your mobile hotspot:
Press and hold the Power button until
the LCD screen lights.
¾ To connect to your mobile hotspot:
1. Ensure that WiFi is enabled on your
computer or other device.
2. On your computer or other device,
search for wireless networks:
• For Windows devices, click the
Internet Access icon.
• For Mac devices, from the WiFi
menu, select the network.
• For tablets, look for a settings
option.
3. Select the WiFi name displayed on your
LCD screen.
4. Enter the WiFi password exactly as it
appears on the LCD screen.
Passwords are case-sensitive.
9
When a computer or mobile device
connects to the mobile hotspot, a 1
displays beside the WiFi icon on the
LCD screen.
Note: For you to connect to the
mobile broadband network, your SIM
account must be active. If you use a
prepaid or pay-as-you-go micro-SIM,
the account must show a positive
balance.
5. Launch your browser and, if desired,
visit the Mobile Hotspot web page
http://netgear.aircard to personalize
your settings.
Your mobile hotspot is ready to use out
of the box. You probably don’t need to
personalize any settings.
The mobile hotspot is completely
secure using its default security
settings.
Note: If you see a message indicating that
a mobile connection was not made, you
might need to add an APN. For information
about adding APNs, refer to the user
manual.
10
Recharging Your Battery
Your battery comes partially charged.
¾ To recharge your battery:
1. Connect the micro-USB cable to your
mobile hotspot.
2. Connect the other end of the cable to
the USB port on your computer or to
the USB charger.
Connect Devices
You can add devices to your network using
a WiFi network manager or WPS if the
device can use WPS.
Note: WPS enables you to connect WPS-
enabled devices to a WiFi network without
entering a WiFi password using a keyboard.
11
¾ To connect additional WiFi-capable
devices:
1. Open the WiFi network manager on
your computer or other WiFi device
(such as smartphone, tablet, media
players, cameras, and so on).
2. Select the WiFi network name
displayed on the LCD screen.
3. Enter the WiFi password displayed on
the LCD screen.
4. Launch your browser.
¾ To connect devices using WPS:
1. Press the Power button to awaken the
LCD screen.
2. Tap the Wi-Fi icon.
The Wi-Fi window displays.
3. Tap the WPS icon.
The WPS window displays.
4. Tap the Pair with Main Wi-Fi button.
5. Within two minutes, press the WPS
button on the device that you want to
connect to your WiFi network.
The mobile hotspot and the wireless
device automatically communicate and
establish a secure connection.
12
Using the Touch Screen
WiFi
You can manage your WiFi settings by
tapping the Main Wi-Fi icon.
You can also manage your WiFi settings
from your Mobile Hotspot web page.
Note: The mobile hotspot resets when you
change WiFi settings. Connected devices
are disconnected.
13
Messages
The Messages icon shows the number of
unread SMS messages received by your
device.
¾ To read messages:
1. On the home screen, tap the
Messages icon.
2. Tap a message line.
Settings
You can customise other settings as well.
¾ To customise your hotspots
settings:
1. On the home screen, tap the Settings
icon.
2. Tap any one of the icons to adjust a
setting.
14
The following table describes the icons that
display on the Settings window.
Icon Description
Display Configure the touchscreen display
(brightness, time-out, display
of WiFi credentials, status LED
display).
Network Choose the network types to use,
set roaming rules, display network
connection details.
Jump
Boost
Use your mobile hotspot to
give a boost to another devices
battery using the jump boost cable
provided with your device.
Airplane
Mode
Disable the mobile hotspot’s WiFi
and cellular radios while on an
airplane or in areas where WiFi is
restricted. The jump boost feature
can still be used in this mode.
USB
Tether
Connect to the Internet from
supported computers with a USB
cable, and charge your device at
the same time.
More See information about the device
including soware updates, factory
reset, and tutorial.
15
Mobile Hotspot Web
Page
Use the mobile hotspot web page to view
or change your mobile hotspot’s settings.
¾ To access your mobile hotspot web
page:
1. Launch an Internet browser from a
computer or wireless device that is
connected to the network.
2. Enter http://netgear.aircard.
3. Enter the administrator login password.
The default password is password.
The mobile hotspot web page displays.
Change Security
Settings
The WiFi network name and admin
password provide security. Your mobile
hotspot comes with a randomly generated
and secured WiFi network name (SSID) and
password that you can continue to use as
is. Read the following procedure if you want
to change your security settings.
16
¾ To change the WiFi network name
or WiFi password:
1. Launch an Internet browser from a
computer or wireless device that is
connected to the mobile hotspot.
2. Enter http://netgear.aircard.
3. Enter the administrator login password.
The default password is password.
The mobile hotspot web page displays.
4. Select WiFi > OPTIONS.
The WiFi Options page displays.
5. To change the WiFi network name,
enter a new WiFi network name.
6. To change the WiFi password, enter a
new WiFi password.
If you change your password, be sure
to keep a record of it and store it in a
safe place.
7. Click the Submit button.
Support
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number
on the label of your product and use it to register your
product at https://my.netgear.com.
You must register your product before you can use
NETGEAR telephone support. NETGEAR recommends
registering your product through the NETGEAR
website.
For product updates and web support, visit
http://support.netgear.com.
NETGEAR recommends that you use only the official
NETGEAR support resources.
You can get the user manual online at
http://downloadcenter.netgear.com or through a link
in the product’s user interface.
Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
Compliance
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_
id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before
connecting the power supply.
Kurzanleitung
AirCard 790
Mobiler Hotspot
19
Ihr Hotspot
Machen Sie sich vor dem Verwenden
des mobilen Hotspots mit dem
LCD-Bildschirm, den Symbolen, Tasten
und Anschlüssen vertraut.
Tasten und Anschlüsse
Micro-USB-Anschluss
Primärer Antennenanschluss
Ein-/Ausschalter
Deutsch
20
LCD-Bildschirm
Sie können die Symbole und andere
Elemente auf dem Touchscreen zum
Anzeigen des Status des mobilen Hotspots,
Konfigurieren der WLAN-Bandeinstellungen
und Anzeigen von Details zur Datennutzung
und Systemmeldungen verwenden.
Sie können auch Warnmeldungen und
Benachrichtigungen anzeigen, indem Sie
vom Symbol ALERTS (Warnmeldungen)
oben auf dem Bildschirm nach unten
wischen. Scrollen Sie darüber, um mehrere
Warnmeldungen anzuzeigen.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132

Netgear Mobile Hotspot AirCard Le manuel du propriétaire

Taper
Le manuel du propriétaire