LAB T LavvieBeacon Manuel utilisateur

Taper
Manuel utilisateur
Copyright 2022. Lab-T, Inc.
User Manual
LavvieBeacon Manual
LavvieBeacon is the Directional Bluetooth antenna which transmits electric signals inside
LavvieBot S and supports data transmission between LavvieBot S and LavvieTAG.
How to use
1~2. Open the beacon cover and put the two batteries in it and close the cover
3~4. Attach the two double-sided tapes on the beacon cover and detach the sticker
5. Open the LavvieBot door and attach the beacon on the indented LavvieBot ceiling to
the correct direction
MARKING ACCORDING TO THE ELECTRICAL APPLIANCES AND CONSUMER
PRODUCTS SAFETY CONTROL ACT
· Certification Information
· Product Name: Directional Bluetooth antenna
· Model Name: LavvieBeacon
·Size: 88*117*37 (mm)
· Input: DC 3.0V(AA*2)
· Temperature setting for the use: 0℃ ~ 45℃
· Place for the use: For residential use (indoor)
· Manufacturer : PurrSong, Inc.
· Address: D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea
· Country of Origin: Republic of Korea
· Date of manufacture: Indicated separately
· RF SPEC.
1. Bluetooth
- Frequency : 2402 ~ 2480 MHz
- Version : Bluetooth Low Energy 5.0
-Output : 3 dBm ± 1 dBm
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions : (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
· CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment
· RF Exposure Statement
A minimum separation distance of 20 cm must be maintained between the antenna and the
person for this appliance to satisfy the RF exposure requirements
· Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)this
device must accept any interference, including interference that may cause undesired operation of
the device.
·Énoncéd'Industrie Canada(IC)
Le present appareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. Lexploitationestautorisee aux deux conditions suivantes : (1) l’appareil ne doit
pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillageradioelectriquesubi, meme si le brouillageest susceptible d’encompromettre le
fonctionnement.
· Tout changementou modification non expressémentapprouvépar la partiechargée de la mise
enconformitépeutannuler le droit de l’utilisateur à utiliserl’équipement.
·Déclarationd'exposition aux RF
Une distance de séparationminimale de 20 cm doit êtremaintenue entre l'antenne et la
personne pour que cetappareilsatisfasse aux exigences d'exposition aux RF
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

LAB T LavvieBeacon Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues