Kontakt Micro-Location

website: kontakt.io

email: [email protected]

Kontakt Beacon User Manual

General Description

Kontakt Beacon is an electronic device based on Bluetooth Low Energy® which

broadcasts radio signals called advertising packets. Those signals can be

received without the need to pair, with any devices which are in range and are

beacon on or active in any way. They are ready to perform since programmed

and assembled. In case of possible malfunctioning users are advised to contact

technical support to get proper replacements (email: [email protected]).

Replacement policy also applies to performance faults caused by batteries

running low after a long time use. The manufacturer logo is placed on the top

of the device’s casing and more details about it can be found on its box.

Installation

Kontakt Beacons can be fixed on the wall using a proper nail or a screw thanks

to specially created mounting bracket. Make sure that Beacon adheres to the

mounting surface firmly. Alternatively, you can use double-side adhesive tape

recommend using at least 4cm2 of the sticky tape with viscosity of 10N/cm.

Copyright © 2017 Kontakt Micro-Location LLC. All rights reserved.

Kontakt Beacon Pro User manual

WARNING

Opening beacons or fixing them is strictly forbidden.

Kontakt Beacons contain electronic elements and batteries which should be

properly disposed. If you ever want to utilise beacons, please contact

manufacturer first.

Switching the original batteries with one of a different types might cause a

risk of explosion.

FCC Compliance Statement

No changes shall be made to the equipment without the manufacturer’s

permission as this may void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This transceiver must not be co‐located or

operating in conjunction with any other antenna or transmitter. In accordance

with FCC requirements of human exposure to radio frequency fields, the

radiating element shall be installed such that a minimum separation distance of

20cm is maintained from all persons.

ISED Canada Compliance Statement

This device complies with Industry Canada license‐exempt RSS standard(s).

Kontakt Beacon Pro User manual

(2) this device must accept any interference, including interference that may

(1) l’appareil ne doit pas produire de brouillage,

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with RSS‐102 radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20 cm between the radiator and all persons.

Cet appareil est conforme aux limitations de la norme RSS‐102 concernant

l’exposition aux radiations dans un environnement non contrôlé. Cet

équipement doit être installé et utilisé en respectant une distance minimale de

20 cm entre le radiateur et toutes les personnes.