Auriol 111022 Operation and Safety Notes

INDOOR / OUTDOOR THERMOMETER

IAN 111022

INDEN- / UDENDØRS

TERMOMETER

Brugs- og sikkerhedsanvisninger

INOMHUS- /

UTOMHUSTERMOMETER

Bruksanvisning och säkerhetsanvisningar

INDOOR / OUTDOOR

THERMOMETER

Operation and Safety Notes

SISÄ- JA

U

LKOLÄMPÖMITTARI

Käyttö- ja turvallisuusohjeet

THERMOMÈTRE

INTÉRIEUR / EXTÉRIEUR

In

structions d‘utilisation et consignes de sécurité

BINNEN- / BUITEN-

THERMOMETER

Bedienings- en veiligheidsinstructies

GB / IE Operation and Safety Notes Page 5

FI Käyttö- ja turvallisuusohjeet Sivu 22

SE Bruksanvisning och säkerhetsanvisningar Sidan 39

DK Brugs- og sikkerhedsanvisninger Side 55

FR / BE Instructions d‘utilisation et consignes de sécurité Page 72

NL / BE Bedienings- en veiligheidsinstructies Pagina 91

A

- +

B

1

2

3

4

5

6

7

12

13

149

10

8

11

5 GB/IE

Intended use .................................. Page 6

Description of parts ................. Page 6

Technical data ............................... Page 7

Scope of supply ........................... Page 7

Safety notes ................................... Page 8

Battery Safety Instructions .................... Page 10

Getting started ............................. Page 11

Inserting / changing the battery ........... Page 12

Positioning / installing the device ......... Page 12

Mounting the device on a wall ............ Page 14

Temperature memory ........................... Page 15

Setting the time ..................................... Page 16

Troubleshooting .................................... Page 17

Cleaning and Care .................... Page 18

Disposal .............................................. Page 18

Warranty .......................................... Page 20

6 GB/IE

Indoor / outdoor thermometer

Q

Intended use

The thermometer measures the inside and

outside temperature in Celsius (°C). The main

unit is placed indoor, and sensor can be put

outdoor. The thermometer also displays the

highest and lowest measured temperature

and the time in 24-hour format. The device is

not intended for commercial use.

Q

Description of parts

1

In / outdoor thermometer

2

“TIME” display

3

“IN” indoor temperature display

4

“OUT” outdoor temperature display

5

External sensor

6

“SET” button

7

MIN / MAX button

8

Stand

9

Battery compartment cover

7 GB/IE

10

Battery compartment

11

Hanger

12

Dowel

13

Screw

14

Self-adhesive pad

Q

Technical data

Operating voltage: 1.5 V (DC)

Power supply: 1 x 1.5 V

AAA

battery (included)

Temperature range: Indoor: –10 °C to

+40 °C

Outdoor: –40 °C to

+60 °C

External sensor lead: approx. 2.8 m

Liquid crystal display: 21 x 50 mm

Q

Scope of supply

Please check the supplied items immediately

after unpacking the device to ensure that

there is nothing missing and that the product

8 GB/IE

and all of its parts are in perfect condition.

Do not under any circumstances install the

product if the delivery scope is incomplete.

1 Indoor / outdoor thermometer

1 1.5 V

AAA battery

1 Dowel

1 Screw

1 Self-adhesive pad

1 Operating manual

Safety notes

KEEP ALL THE SAFETY ADVICE AND

INSTRUCTIONS IN A SAFE PLACE FOR

FUTURE REFERENCE!

This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given super-

9 GB/IE

vision or instruction concerning use of the

appliance in a safe way and understand

the hazards involved. Children shall not

play with the appliance. Cleaning and

user maintenance shall not be made by

children without supervision.

Never dismantle the product. Improper

repair can cause signiﬁcant risks to the

user. Repairs must always be carried out

by a specialist only.

Do not use the device if it is damaged.

Damaged devices represent a danger

of death from electric shock!

Do not expose the device to an extremely

high electromagnetic ﬁeld. This may impair

the correct functioning of the device.

Please prevent the housing of the device

from rubbing to strongly against textiles.

This may result in static charges and aﬀect

the results of the measurements.

Please note that the guarantee does not

cover damage caused by incorrect hand-

ling, non-compliance with the operating

10 GB/IE

instructions or interference with the device

by unauthorised individuals.

Install the external sensor

5

outdoors so

that it is not exposed to direct sunlight.

Take care that the mains lead is not

damaged on installation.

Q

Battery Safety Instructions

CAUTION! RISK OF EXPLOSION!

Never recharge the batteries. Have a

spent battery removed from the instrument

immediately. There is an increased risk of

leakage.

Batteries must not be disposed of in

household waste.

Consumers are under a legal obligation

to dispose of batteries in the proper way.

Keep the battery out of the reach of children,

do not dispose of the battery in ﬁre, do

not shortcircuit it, and do not take it apart.

Failure to observe these instructions may

result in the battery discharging beyond

its end voltage, which poses a risk of

11 GB/IE

leakage. If the battery in your instrument

has leaked, have it removed immediately

to prevent damage to the instrument.

Avoid contact with skin, eyes and mucous

membrane. In the event of contact with

battery acid, rinse the aﬀected area with

plenty of water and / or consult a doctor.

CAUTION! TAKE CARE NOT

TO DAMAGE THE PRODUCT!

Only use the stated type of battery.

Make sure that the polarity is correct.

Check the battery regularly for signs of

leakage.

Remove the battery if the device is not in

use for any length of time.

Do not under any circumstances short-

circuit the terminals.

Q

Getting started

Remove the protective foil before ﬁrst use.

12 GB/IE

Q

Inserting / changing

the battery

See Fig. B.

Q

Positioning / installing

the device

CAUTION! When choosing a position

for the device, make sure that it is not exposed

to direct sunlight, vibrations, heat, cold damp

or dust. Do not install devices close to heat

sources, e.g. radiators. There is otherwise a

danger that the device will be damaged.

Take care that the device is suspended

properly if mounted on a wall. If the device

falls, it could cause injury or damage to

itself or other property.

Place the device on a ﬂat, level surface.

Do not place the device on valuable or sen-

sitive surfaces without suitable protection.

The surfaces may otherwise be damaged.

13 GB/IE

Stand:

Open the stand

8

on the back of the

device to support the device.

Wall mount:

Note: you will need a drill for this step.

CAUTION! DANGER TO LIFE,

RISK OF INJURY AND DAMAGE TO

PROPERTY! Please read the operating and

safety instructions for your drill carefully.

Hold the device on the wall to ﬁnd a

suitable position for installation.

Use a pencil if necessary to mark the

required position.

DANGER OF ELECTRIC SHOCK! DAN-

GER OF DAMAGE TO PROPERTY!

DANGER OF INJURY! Ensure that

you do not strike electrical cables, gas or

water pipes when you are drilling into the

wall. If necessary, check the wall using a

suitable detector before you drill.

Drill a suitable hole in the wall using an

electric drill.

14 GB/IE

Push a suitable dowel

12

into the hole

and screw a screw

13

into the dowel

12

.

Ensure that the screw

13

is not completely

screwed into the dowel

12

.

Hang the indoor / outdoor thermometer

from the screw

13

. To do this hook the

hanger

11

of the indoor / outdoor ther-

mometer on to the screw

13

.

Q

Mounting the device

on a wall

Pull the protective foil from one of the

sides of the self-adhesive pad

14

.

Stick the self-adhesive pad

14

on to the

back of the device.

Pull the protective foil from the other side

of the self-adhesive pad

14

.

Take the device to the desired location

and press it carefully on to a wall or other

smooth surface.

Note: Wait 24 hours after installation until

using the device. This is to allow the self-adhe-

15 GB/IE

sive pad

14

to achieve an optimum level of

adhesion. After installation, do not change the

position of the self-adhesive pad

14

, otherwise

the level of adhesion achieved by the self-

adhesive pad could be reduced.

Q

Temperature memory

Press the MIN / MAX button

7

to show

the lowest temperature measured indoors,

“IN”

3

, and outdoors, “OUT”

4

.

Press the MIN / MAX button

7

again to

display the highest measured temperature.

Press the MIN / MAX button

7

again to

return to the current temperature.

Note: if the MIN / MAX button

7

is

not pressed for 5 seconds, the display

automatically reverts to the current

temperature.

Note: the stored minimum and maximum

temperature is deleted every day at

00:00 hours and measurement begins

again.

16 GB/IE

Q

Setting the time

Press the “SET” button

6

brieﬂy to begin

setting the hour. The hours in the “TIME”

display

2

ﬂash.

Press the MIN / MAX button

7

to set the

hour.

Tip: keep the MIN / MAX button

7

pressed. This allows you to make the

settings faster. If you do not press any

button for 60 seconds, the LC display auto-

matically reverts to the standard display.

Press the “SET” button

6

brieﬂy again

to begin setting the minutes. The minutes

in the “TIME” display

2

ﬂash.

Press the MIN / MAX button

7

to set the

minutes.

Press the “SET” button

6

brieﬂy again

to conﬁrm the set time.

Note: the set time is also conﬁrmed if no

button is pressed in a space of 60 seconds.

Note: the thermometer now displays the

current time under “TIME”

2

, the inside

17 GB/IE

temperature “IN”

3

and the outside

temperature “OUT”

4

.

Q

Troubleshooting

Note: the device contains sensitive electronic

components. It is therefore possible that radio

transmission devices in its immediate vicinity

may cause interference.

Remove any such device from the vicinity

of the indoor / outdoor thermometer if

errors occur on the display.

Note: electrostatic discharge may interfere

with operation.

In the event of any malfunction, brieﬂy

remove the battery and replace it as

described under “Inserting / changing the

battery“.

18 GB/IE

Q

Cleaning and Care

Do not under any circumstances use

corrosive or abrasive cleaning agents.

Otherwise the surface of the product can

be damaged.

Use a slightly dampened, non-ﬂuﬃng

cloth to clean the product.

Q

Disposal

The packaging is made entirely of

recyclable materials, which you

may dispose of at local recycling

facilities.

Contact your local refuse disposal authority

for more details of how to dispose of your

worn-out product.

19 GB/IE

To help protect the environment,

please dispose of the product

properly when it has reached the

end of its useful life and not in the

household waste. Information on

collection points and their opening

hours can be obtained from your

local authority.

Faulty or used batteries must be recycled in

accordance with Directive 2006 / 66 / EC.

Please return the batteries and / or the device

to the available collection points.

Pb

Environmental damage

through incorrect disposal

of the batteries!

Batteries may not be disposed of with the usual

domestic waste. They may contain toxic heavy

metals and are subject to hazardous waste

treatment rules and regulations. The chemical

symbols for heavy metals are as follows:

20 GB/IE

Cd = cadmium, Hg = mercury, Pb = lead. That

is why you should dispose of used batteries

at a local collection point.

Warranty

The device has been manufactured to strict

quality guidelines and meticulously examined

before delivery. In the event of product defects

you have legal rights against the retailer of

this product. Your legal rights are not limited

in any way by our warranty detailed below.

The warranty for this device is 3 years from

the date of purchase. Should this device

show any fault in materials or manufacture

within three years from the date of purchase,

we will repair or replace it - at our choice -

free of charge to you.

The warranty period begins on the date of

purchase. Please keep the original sales re-

ceipt in a safe location. This document is re-

quired as your proof of purchase. This war-

ranty becomes void if the device has been

La page est en cours de chargement...

Auriol 111022 Operation and Safety Notes

Auriol 111022 Operation and Safety Notes

dans d''autres langues

Documents connexes

Autres documents