Samsung LN46C750 Le manuel du propriétaire

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model Serial No.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de

atención al cliente de SAMSUNG.

Country Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc.,

Service à la Clientèle 55 Standish Court

Mississauga, Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronics America, Inc.

105 Challenger Road

Ridgefield Park, NJ 07660-0511

BN68-02584A-02

LCD TV

user manual

BN68-02584A_Eng.indb 1 2010-03-29 �� 3:40:58

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-

motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model

offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on

nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer

graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines

can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the

programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture

sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as

burned-in images, are not covered by your Samsung limited warranty.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT•

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide

Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products

purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original

Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and

from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or

workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times,

exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864) –

In Canada : 1-800-SAMSUNG –

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock

or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image

quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.•

Always try to display any image on full screen, use TV set picture format menu for best possible match.•

Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •

process.

Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

x

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

4inches

BN68-02584A_Eng.indb 2 2010-03-29 �� 3:40:58

3

Contents

English

ENGLSH

Getting Started

List of Features y ......................................................... 4

Accessories y .............................................................. 4

Installing the LCD TV Stand y ...................................... 4

Viewing the Control Panel y ......................................... 5

Viewing the Remote Control y ...................................... 6

Connecting to an Antenna y ........................................ 7

Plug & Play (Initial Setup) y ........................................... 7

Connections

Connecting to an AV Device y ...................................... 8

Connecting to an Audio Device y ................................. 9

Connecting to a PC y ................................................ 10

Changing the Input source y ...................................... 11

How to Navigate Menus y .......................................... 12

Channel Menu y ........................................................ 12

Seeing Channels 12

Using Favorite Channels 13

Memorizing channels 13

Editing channels 13

Other Features 13

Picture Menu y .......................................................... 14

Changing the Preset Picture Mode 14

Adjusting picture settings 15

Economical Solutions 15

Setting up the TV with your PC 15

Changing the Picture Options 16

Viewing TV using the 3D function 18

Sound Menu y .......................................................... 20

Changing the Preset Sound Mode 20

Adjusting sound settings 20

Sound Settings 20

Setup Menu y ............................................................ 21

Setting the Time 21

Using the Sleep Timer 22

Setting the On/Off Timer 22

Locking Programs 22

Other Features 24

Picture In Picture (PIP) 25

Support Menu y ......................................................... 25

Advanced Features

Network Connection y ............................................... 27

Connecting to a Wired Network 27

Connecting to a Wireless Network 29

Media Play y .............................................................. 34

Connecting a USB Device 34

Connecting to the PC through network 34

Screen Display 36

Playing Multiple Files 39

Media Play - Additional Functions 39

Anynet+ y ................................................................. 41

Setting Up Anynet+ 42

Switching between Anynet+ Devices 42

Recording 42

Listening through a Receiver 43

Troubleshooting for Anynet+ 43

Internet@TV y ............................................................ 44

Getting Started with Internet@TV 44

Setting up Internet@TV 45

Using the Internet@TV service 47

Troubleshooting for Internet@TV 50

Help Website 50

AllShare y .................................................................. 51

About AllShare 51

Setting Up AllShare 51

Other Information

Assembling the Cables y ........................................... 53

Anti-theft Kensington Lock y ...................................... 53

Installing the Wall Mount y ......................................... 53

Securing the TV to the Wall y ..................................... 55

Troubleshooting y ...................................................... 56

Speciﬁcations y ......................................................... 59

License 59

Dimensions y ............................................................. 60

Index y ...................................................................... 61

Check the Symbol!

t

✎

O

This function can be used by pressing the

TOOLS button on the remote control.

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

P

POWER

F A V . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

CC

MTS

INFO

SLEEP

TOOLS

MEDIA.P

CONTENT

3D

CH LIST

D

Y A HOO

CH LIST

@

TV

INTERNET

BN68-02584A_Eng.indb 3 2010-03-29 �� 3:40:59

4

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y

without a cable box / STB (Set-Top-Box) satellite receiver.

Media Play y : Allows you to play music ﬁles, pictures, and movies saved on a USB or your PC. (P. 34)

Internet@TV y : You can use various Internet services and view useful information and entertaining content. (p. 44)

AllShare y : AllShare connects your TV and compatible Samsung mobile phones/devices through a network. (P. 51)

Self Diagnosis y : You can check picture and sound operation. (P. 26)

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

✎

Remote Control (BN59-01043A) & Batteries (AAA x 2) y

Owner’s Instructions y

Warranty Card / Safety Guide / Quick Setup Guide y

Cleaning Cloth (BN63-01798B) y

Power Cord y

Blanking Bracket y

(BN63-06339A)

TV-Holder & Screw y

(M8: BN96-10788B)

Cable Tie y

(BN61-05596A)

Holder-Ring (4ea) y

(BN61-04529A )

Installing the LCD TV Stand

Components

When installing the stand, use the provided components and parts.

Stand Guide Stand Screws

Getting Started

English

Make sure to distinguish between the front and back of the Stand

✎

and Guide Stand when assembling them.

Make sure that at least two persons lift and move the LCD TV.

✎

Stand the product up and fasten the screws. If you fasten the

✎

screws with the LCD TV placed down, it may lean to one side.

A B

1 EA 1 EA

4EA (M4 X L8)

4EA (M4 X L12)

C

D

2

Front

A

1

Top View

D

4EA

Rear

B

C

Bottom View

3

(M8 X 19: 46 ~ 55inch TVs)

BN68-02584A_Eng.indb 4 2010-03-29 �� 3:41:01

5

01 Getting Started

English

Viewing the Control Panel

The product color and shape may vary depending on the model.

✎

P

(Power)

Turns the TV on or off.

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

E

Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER

E

button on the remote control.

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

y

Adjusts the volume. In the OSD, use the

y

buttons as you would use the

◄ and ► buttons on the remote control.

z

Changes the channels. In the OSD, use the

z

buttons as you would use the

▼ and ▲ buttons on the remote control.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Power IndicatorRemote control sensor

Speakers

BN68-02584A_Eng.indb 5 2010-03-29 �� 3:41:01

6

Viewing the Remote Control

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel,

✎

Volume buttons.

PRE-CH

CH

VOL

MENU

MUTE

@

TV

RETURN

CH LIST

EXIT

ABCD

CONTENTINTERNET

FAV . CH

MEDIA.P

CC

YA HOO!

P.SIZE

3D

TOOLS

INFO

Getting Started

English

Installing batteries (Battery size: AAA)

NOTE

✎

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote

x

control. Avoid use when nearby fluorescent lights or neon

signs.

The color and shape may vary depending on the model.

x

Press to display information on the TV screen.

(P. 21)

Changes channels.

Returns to the previous channel.

Turns the remote control light on and off.

When on, the buttons become illuminated for a

moment when pressed.

(Using the remote control with this button set to

off will reduce the battery usage time.)

Cuts off the sound temporarily.

Displays the main on-screen menu.

Exits the menu.

Buttons used in the Channel list,

Internet@TV, Media Play menu, etc.

MEDIA.P: Views Media Play. (P. 34)

YAHOO!: Runs Yahoo widget! (P. 48)

3D: Sets the 3D mode. (P. 18)

FAV.CH: Displays Favorite Channel Lists on the

screen (P. 13)

P.SIZE: Choose the picture size. (P. 17)

CC: Controls the caption decoder. (P. 24)

Link to various Internet services. (P. 44)

Returns to the previous menu.

Quickly select frequently used functions.

Selects the on-screen menu items and

changes the values seen on the menu.

Displays the Content View, which

includes Channel List, Internet@TV,

Media Play, AllShare and 3D.

Displays the channel list on the screen.

(P. 12)

Press to select additional channels (digital)

being broadcast by the same station. For

example, to select channel ‘54-3’, press

‘54’, then press ‘-’ and ‘3’.

Adjusts the volume.

Displays and selects the available video

sources. (P. 11)

Turns the TV on and off.

Use these buttons in Media Play and

Anynet+ modes.

(: controls recording on Samsung

recorders with the Anynet+ feature)

Press to directly access channels.

BN68-02584A_Eng.indb 6 2010-03-29 �� 3:41:01

7

01 Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

Connecting the mains and antenna.

✎

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER

P

button. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the red button.

✎

1

Selecting a language

Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the desired OSD (On Screen Display) language.

P

POWER

FAV . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

CC

MTS

INFO

SLEEP

TOOLS

MEDIA.P

CONTENT

3D

CH LIST

D

Y A HOO

CH LIST

@

TV

INTERNET

2

Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER

E

button.

Select the y Home Use mode. Store Demo Mode is for retail

environments.

To return the unit’s settings from y Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the

volume in the OSD, press and hold MENU for 5 sec.

3

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER

E

button. Select Air, Cable or Auto.

In

✎

Cable mode, you can select the correct signal source among STD, HRC, and IRC

by pressing the ▲, ▼, ◄ or ► button, then press the ENTER

E

button.

4

Selecting a channel The channel search will start automatically.

For more information, refer to Channel → Auto Program. (P. 13)

Press the

✎

ENTER

E

button at any time to interrupt the memorization process.

5

Setting the Clock

Mode

Set the Clock Mode automatically or manually.

If you select the

✎

Auto, set the daylight saving time.

Select the time zone which you live.

6

Viewing the HD

Connection Guide

The connection method for the best HD screen quality is displayed.

7

Enjoy your TV.

Press the ENTER

E

button.

If You Want to Reset This Feature...

MENU

O m

→ Setup → Plug & Play → ENTER

E

Cable

R-AUDIO-L

P

R PB Y

ANT OUT

VHF/UHF Antenna

Plug & Play

Time

Menu Language : English

Caption : Off

Security

Network

General

PIP : Off

Setup

or

Power Input

BN68-02584A_Eng.indb 7 2010-03-29 �� 3:41:02

8

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).

HDMI IN 1(DVI)

✎

, 2(ARC), 3, 4 / PC/DVI AUDIO IN

When using an HDMI/DVI cable connection, you must use the

x

HDMI IN 1(DVI) jack for video. A DVD, Blu-ray

player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI

to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting an

x

HDMI versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound /

annoying ﬂicker / abnormal color).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

x

suspect the version is older than 1.4, contact the provider of the device to conﬁrm the HDMI version and request

an upgrade.

Samsung TVs support HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return

x

Channel) function is only supported on HDMI IN 2(ARC).

If – 3D Auto View is On, some functions, such as Yahoo or Internet@TV, are disabled. To use these functions,

set 3D Auto View or 3D Mode to Off.

The ARC function enables digital output of sound using the TV's

x

HDMI IN 2(ARC) port and can only be

operated when the TV is connected to an audio receiver that supports the ARC.

The ARC mode is only enabled when the TV is connected to a device with an HDMI Standard cable, HDMI –

High Speed cable, Hdmi Standard with Ethernet cable or HDMI High Speed with Ethernet cable.

When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent –

to a receiver from the TV via an HDMI cable without the need for a separate optical cable.

It is recommended you purchase an HDMI-certiﬁed cable. Otherwise, the screen may appear blank or a

x

connection error may occur.

Device

R-AUDIO-L

P

R PB Y

DVI OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

Red White

W W

B

G

RR

W

Y

BD/DVD player/

HD cable/Sat. box

R-AUDIO-L

P

R PB Y

HDMI OUT

English

ConnectionsConnections

BN68-02584A_Eng.indb 8 2010-03-29 �� 3:41:04

9

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, Home Theater

DIGITAL AUDIO OUT (OPTICAL)

✎

When a Digital Audio System is connected to the

x

DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

x

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is

a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is

connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to

hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite

receiver directly to an amplifier or home theater.

AUDIO OUT

✎

: Connects to the audio input jacks on your amplifier/home theater.

When connecting, use the appropriate connector (sold separately).

x

When an audio amplifier is connected to the

x

AUDIO OUT jacks: Decrease the volume of the TV and adjust the

volume level with the amplifier’s volume control.

R-AUDIO-L

P

R PB Y

COMPONENT OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

Blu-ray player

WY

W Y

B

G

R

W

B

G

R

R-AUDIO-L

P

R PB Y

VIDEO OUT

VCR

R-AUDIO-L

P

R PB Y

AUDIO OUT

When connecting to

✎

AV IN 1, the

color of the AV IN 1 [Y/VIDEO] jack

(Green) does not match the color of

the video cable (Yellow).

For better picture quality, the

✎

Component connection is

recommended over the A/V

connection.

W W

B

G

RR

W

Y

Yellow Red White Red Blue Green

English

02 Connections

DVD

Home Theater

R-AUDIO-L

P

R PB Y

OPTICAL

R-AUDIO-L

P

R PB Y

AUDIO IN

Red White

W W

B

G

RR

W

Y

Digital audio system

BN68-02584A_Eng.indb 9 2010-03-29 �� 3:41:06

10

English

Connections

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920X1080@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA CVT

720 x 576 35.910 59.950 32.750 -/+

1152 x 864 53.783 59.959 81.750 -/+

1280 x 720 56.456 74.777 95.750 -/+

1280 x 960 75.231 74.857 130.000 -/+

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+

1280 x 800 62.795 74.934 106.500 -/+

1280 x 960 60.000 60.000 108.000 +/+

1280 x 720 45.000 60.000 74.250 +/+

1360 x 768 47.712 60.015 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

VESA GTF

1280 x 720 52.500 70.000 89.040 -/+

1280 x 1024 74.620 70.000 128.943 -/-

VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+

NOTE

✎✎

For HDMI/DVI cable connection, you must use the

x

HDMI IN 1(DVI) jack.

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

x

R-AUDIO-L

P

R PB Y

AUDIO OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

R-AUDIO-L

P

R PB Y

DVI OUT

R-AUDIO-L

P

R PB Y

PC OUT

BN68-02584A_Eng.indb 10 2010-03-29 �� 3:41:08

11

English

02 Connections

Changing the Input source

Source List

MENU

O m

→ Input → Source List → ENTER

E

Use to select TV or an external input sources

such as a DVD / Blu-ray player / cable box /

STB satellite receiver.

TV / PC / AV1 / AV2 / Component1 / ■

Component2 / HDMI1/DVI / HDMI2 /

HDMI3 / HDMI4 / USB

You can only choose external

✎

devices that are connected to the TV. In the

Source List, connected inputs will be highlighted.

PC

✎

always stay activated.

Edit Name

MENU

O m

→ Input → Edit Name → ENTER

E

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■

AV Receiver / Game / Camcorder / PC / DVI PC /

DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make

your input source selection easier.

When a PC with a resolution of 1920 x 1080 @

✎

60Hz is connected to the HDMI IN 1(DVI) port,

you should set to DVI PC mode under Edit Name.

When connecting an HDMI/DVI cable to the

✎

HDMI

IN 1(DVI) port, you should set to DVI PC or DVI

Devices mode under Edit Name.

EX-LINK

Connector for service only.

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

P

POWER

FAV . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

CC

MTS

INFO

SLEEP

TOOLS

MEDIA.P

CONTENT

3D

CH LIST

D

Y A HOO

CH LIST

@

TV

INTERNET

BN68-02584A_Eng.indb 11 2010-03-29 �� 3:41:09

12

English

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

PRE-

CH

VO

L

MUT

E

@

TV

C

H LI

ST

A

B

C

D

CONTEN

T

INTERNET

FAV . CH

MEDIA.

P

CC

Y A H

OO

!

P.SIZ

E

3

D

T

OO

L

S

I

NF

O

MENU

RETURN

EXIT

1

2

3

4

1 MENU button: Displays the main on-screen menu.

2 ENTER

E

/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU

m

The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼ Select an icon with the ▲ or ▼

button.

3

ENTER

E

Press ENTER

E

to access the

sub-menu.

4

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

5

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER

E

Press ENTER

E

to conﬁrm the

selection.

7

EXIT

e

Press EXIT.

Channel Menu

Seeing Channels ¦

Channel List

MENU

O m

→ Channel → Channel List → ENTER

E

Add, delete or set Favorite channels and use

the program guide for digital broadcasts.

Select a channel in the All Channels, Added

Channels, Favorite or Programmed

screen by pressing the ▲ / ▼ buttons, and

pressing the ENTER

E

button. Then you

can watch the selected channel.

■ All Channels: Shows all currently available

channels.

■ Added Channels: Shows all added channels.

*

■ Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved

programs.

Using the color buttons with the

✎

Channel List

ABCD

x

Red (Antenna): Switches to Air or Cable.

ABCD

x

Green (Zoom): Enlarges or shrinks a channel

number.

ABCD

x

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The

c

mark appears to the left of the selected channels.

x

(Page): Move to next or previous page.

T

x

(Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the

situation.)

Channel Status Display Icons

Icons Operations

c

A channel selected.

*

A channel set as a Favorite.

)

A reserved Program.

(

A program currently being broadcast.

P

POWER

FAV . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

CC

MTS

INFO

SLEEP

TOOLS

MEDIA.P

CONTENT

3D

CH LIST

D

Y A HOO

CH LIST

@

TV

INTERNET

Added Channels

6 Air

6-1 ♥ TV #6

7 Air

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air

A

Antenna

B

Zoom

C

Select Page T Tools

BN68-02584A_Eng.indb 12 2010-03-29 �� 3:41:10

13

English

03 Basic Features

Using Favorite Channels ¦

MENU

O m

→ Channel → Channel List → ENTER

E

*

Add to Favorite / Delete from Favorite

t

Set channels you watch frequently as

Favorites.

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to

Favorite or Delete from Favorite menu

respectively.

Memorizing channels ¦

MENU

O m

→ Channel → ENTER

E

Antenna (Air / Cable)

t

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Auto Program

Air ■ : Air antenna signal.

Cable ■ : Cable antenna signal.

Auto ■ : Air and Cable antenna.

NOTE

✎

When selecting the Cable TV system: Selects the

x

cable system. STD, HRC and IRC identify various

types of cable TV systems. Contact your local cable

company to identify the type of cable system that

exists in your particular area. At this point, the signal

source has been selected.

After all the available channels are stored, it starts

x

to remove scrambled channels. The Auto program

menu then reappears.

How to Stop Auto Programming

1. Press the ENTER

E

button.

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTER

E

button.

Editing channels ¦

MENU

O m

→ Channel → Channel List → ENTER

E

Channel Name Edit

t

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

Channel Name Edit ■ (analog channels only): Assign your

own channel name.

Other Features ¦

MENU

O m

→ Channel → ENTER

E

Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after

Auto Program is completed. This process may take up to

20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER

E

button to select Stop.

2. Press the ◄ button to select Yes.

3. Press the ENTER

E

button.

This function is only available in

✎

Cable mode.

Added Channels

6 Air

6-1 ♥ TV #6

7 Air

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air

A

Antenna

B

Zoom

C

Select Page T Tools

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

P

POWER

FAV . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

CC

MTS

INFO

SLEEP

TOOLS

MEDIA.P

CONTENT

3D

CH LIST

D

Y A HOO

CH LIST

@

TV

INTERNET

BN68-02584A_Eng.indb 13 2010-03-29 �� 3:41:10

14

English

Basic Features

Channel List

MENU

O m

→ Channel → Channel List → ENTER

E

Channel List Option Menu

t

Set each channel using the Channel List menu options (Add/

Delete, Add to Favorite/Delete from Favorite, Timer

Viewing, Select All/ Deselect All). Option menu items may

differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

Add / Delete ■ : Delete or add a channel to display the

channels you want.

NOTE

✎

All deleted channels will be shown on the

x

All

Channels menu.

A gray-colored channel indicates the channel

x

has been deleted.

The

x

Add menu only appears for deleted

channels.

Delete a channel from the

x

Added Channels or

Favorite menu in the same manner.

Timer Viewing ■ : You can set a desired channel to be

displayed automatically at the intended time. Set the

current time ﬁrst to use this function. (P. 21)

1. Press the ◄ / ► /▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for

entering the date and time.

If you selected

✎

Once, Every Week or Every Day

in Repeat, you can enter the date you want.

4.

Select OK, then press the ENTERE button when done.

NOTE

✎

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

x

Programmed menu.

When a digital channel is selected, press the

x

►

button to view the digital program.

Select All ■ : Select all the channels in the channel list.

Deselect All ■ : Deselect all the selected channels.

You can only select

✎

Deselect All when one or

more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to

watch.

1. Press the

ENTERE

button to select Channel List.

2. Press the ◄ and ▼ button move to the Programmed

menu.

Change Info ■ : Change a show you have reserved to

watch.

Cancel Schedules ■ : Cancel a show you have reserved

to watch.

Information ■ : Display a show you have reserved

to watch. (You can also change the reservation

Information.)

Select All / Deselect All: ■ You can select or deselect all

channels in the channel list.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and

store operation. If the signal is weak or distorted, ﬁne tune

the channel manually.

Select y Fine Tune in the Channel menu.

Fine tuned channels that have been saved are marked

✎

with an asterisk “*” on the right-hand side of the

channel number in the channel banner.

To reset the fine-tuning, select

✎

Reset.

Picture Menu

Changing the Preset Picture Mode ¦

MENU

O m

→ Picture → Mode → ENTER

E

Mode

t

Select your preferred picture type.

Dynamic ■ : Suitable for a bright room.

Standard ■ : Suitable for a normal environment.

Natural ■ : Suitable for an eye comfortable display.

Natural

✎

is not available in PC mode.

Movie ■ : Suitable for watching movies in a dark room.

BN68-02584A_Eng.indb 14 2010-03-29 �� 3:41:10

15

English

03 Basic Features

Adjusting picture settings ¦

MENU

O m

→ Picture → Backlight → ENTER

E

Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality

control.

NOTE

✎

When you make changes to

x

Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R) the

OSD will be adjusted accordingly.

In PC mode, you can only make changes to

x

Backlight, Contrast and Brightness.

Settings can be adjusted and stored for each

x

external device connected to the TV.

Lowering picture brightness reduces power

x

consumption.

Economical Solutions ¦

ECO Solution

MENU

O m

→ Picture → ECO Solution → ENTER

E

Energy Saving (Off / Low / Medium / High / Picture ■

Off / Auto): This adjust the brightness of the TV in order

to reduce power consumption. If you select Picture

Off, the screen is turned off , but the sound remains on.

Press any button to turn on the screen again.

Eco Sensor (Off / On) ■ : To enhance your power savings;

the picture settings will automatically adapt to the light

in the room.

If you adjust the

✎

Backlight, the Eco Sensor will

be set to Off.

Min Backlight: When ECO sensor is On, the minimum

screen brightness can be adjusted manually.

If

✎

Eco Sensor is On, the display brightness may

change (become slightly darker in most cases)

depending on the surrounding light intensity.

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) ■

Sets how quickly the TV switches to standby mode, if no

picture is being received.

Disabled when the PC is in power saving mode.

✎

Setting up the TV with your PC ¦

Set the input source to PC.

Auto Adjustment

t

MENU

O m

→ Picture → Auto Adjustment →

ENTER

E

Adjust frequency values/positions and ﬁne tune the settings

automatically.

Not available when connecting through HDMI/DVI

✎

cable.

Screen

Coarse / Fine ■ : Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the center of screen.

Position ■ : Adjust the PC’s screen positioning if it does

not ﬁt the TV screen. Press the ▲ or ▼ button to adjust

the Vertical-Position. Press the ◄ or ► button to adjust

the Horizontal-Position.

Image Reset ■ : Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but

the same basic set-up information will apply in most cases.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution) [Optimum: 1920 X y

1080 pixels]

If a vertical-frequency option exists on your display y

settings dialog box, the correct value is ‘60’ or ‘60 Hz’.

Otherwise, just click ‘OK’ and exit the dialog box.

BN68-02584A_Eng.indb 15 2010-03-29 �� 3:41:11

16

English

Basic Features

Changing the Picture Options ¦

Advanced Settings

MENU

O m

→ Picture → Advanced Settings →

ENTER

E

(available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have

more precise pictures.

In PC mode, you can only make changes to

✎

Dynamic

Contrast, Gamma and White Balance.

Black Tone (Off / Dark / Darker / Darkest) ■ : Select the

black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ :

Adjust the screen contrast.

Shadow Detail ■ : Increase the brightness of dark images.

Disabled under PC mode.

✎

Gamma ■ : Adjust the primary color intensity.

Expert Pattern ■ (Off / Pattern 1 / Pattern 2): By

running the Expert Pattern function, the picture can be

calibrated without a generator or ﬁlter. If the OSD menu

disappears or a menu other than the Picture menu is

opened, the calibration is saved and the Expert Pattern

window disappears.

While the

✎

Expert Pattern is running, sound is not

output.

Only enabled on DTV / Component / HDMI.

✎

RGB Only Mode (Off / Red / Green / Blue) ■ : Displays

the Red, Green and Blue color for making ﬁne

adjustments to the hue and saturation.

Color Space (Auto / Native / Custom) ■ : Adjust the

range of colors available to create the image. To adjust

Color, Red, Green, Blue and Reset, set Color Space

to Custom.

White Balance ■ : Adjust the color temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness.

Reset: Resets the White Balance to it's default

settings.

10p White Balance (Off / On) ■ : Controls the white

balance in 10 point interval by adjusting the red, green,

and blue brightness.

Available when the picture mode is set to Movie

✎

and when the external input is set to HDMI or

Component.

Some external devices may not support this

✎

function.

Interval: Select interval to adjust.

Red: Adjust the red level.

Green: Adjust the green level.

Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default

settings.

Flesh Tone ■ : Emphasize pink “Flesh Tone.”

Edge Enhancement (Off / On) ■ : Emphasize object

boundaries.

xvYCC (Off / On) ■ : Setting the xvYCC mode on

increases detail and color space when watching movies

from an external device (e.g. DVD player) connected to

the HDMI or Component IN jacks.

Available when the picture mode is set to

✎

Movie

and when the external input is set to HDMI or

Component.

Some external devices may not support this

✎

function.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off

Color Space : Native

▼

U Move E Enter R Return

BN68-02584A_Eng.indb 16 2010-03-29 �� 3:41:11

17

English

03 Basic Features

Picture Options

MENU

O m

→ Picture → Picture Options →

ENTER

E

In PC mode, you can only make changes to the

✎

Color

Tone, Size and Auto Protection Time.

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Motion Plus : Standard

▼

U Move E Enter R Return

Color Tone (Cool / Normal / Warm1 / Warm2) ■

Warm1

✎

or Warm2 will be deactivated when the

picture mode is Dynamic.

Settings can be adjusted and stored for each

✎

external device connected to an input on the TV.

Size ■ : Your cable box/satellite receiver

may have its own set of screen sizes as

well. However, we highly recommend

you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide

mode.

Zoom1: Use for moderate magniﬁcation.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

4:3: Sets the picture to basic (4:3) mode.

Do not watch in 4:3 format for a long time. Traces

✎

of borders displayed on the left, right and center

of the screen may cause image retention (screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are input.

NOTE

✎

When Double (

x

À, Œ) mode has been set in PIP

(Picture-in-Picture), the Picture Size cannot be set.

After selecting

x

Zoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER

E

button.

5. Press the ► button to select Reset.

6. Press the ENTER

E

button to reset the picture

to its default position.

After selecting

x

Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to

center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTER

E

button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTER

E

button.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

x

720p (1280x720)

Settings can be adjusted and stored for each

x

external device you have connected to an input on

the TV.

Input Source Picture Size

ATV, AV,

Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV(1080i),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,

Screen Fit

PC 16:9, 4:3

Digital Noise Filter (Off / Low / Medium / High / Auto ■

/ Auto Visualization): If the broadcast signal received

by your TV is weak, you can activate the Digital Noise

Filter feature to reduce any static and ghosting that may

appear on the screen.

When the signal is weak, try other options until the

✎

best picture is displayed.

Auto Visualization: When changing analog channels,

displays signal strength.

Only available for analog channels.

✎

When bar is green, you are receiving the best

✎

possible signal.

MPEG Noise Filter (Off / Low / Medium / High / ■

Auto): Reduces MPEG noise to provide an improved

picture quality.

Disabled under PC mode.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black

level on the screen to adjust the screen depth.

Available only in HDMI mode.

✎

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to

automatically sense and process ﬁlm signals from all

sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

✎

and HDMI (480i / 1080i).

P

POWER

FAV . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

CC

MTS

INFO

SLEEP

TOOLS

MEDIA.P

CONTENT

3D

CH LIST

D

Y A HOO

CH LIST

@

TV

INTERNET

BN68-02584A_Eng.indb 17 2010-03-29 �� 3:41:11

18

English

Basic Features

Auto Motion ■ Plus (Off / Clear / Standard / Smooth

/ Custom / Demo): Enhances motion in fast moving

scenes.

Auto Protection Time (2 hours / 4 hours / 8 hours ■

/ 10 hours / Off): If the screen remains idle with a still

image for a certain period of time deﬁned by the user,

the screen saver is activated to prevent the formation of

ghost images on the screen.

Viewing TV using the 3D function ¦

MENU

O m

→ Picture → 3D → ENTER

E

IMPORTANT SAFETY INFORMATION. READ THE

FOLLOWING WARNINGS BEFORE YOU OR YOUR

CHILD USE THE 3D FUNCTION

WARNING

[

As the TV

x

turns on, the left and right sides of 3D

pictures may overlap more than usual. It may take

time until the picture quality is optimized.

The 3D effect may be experienced differently

x

depending on the viewer. You may not notice the 3D

effect at all if you have a prescription for one eye that

is very different from the other eye.

Parents’ careful supervision is required particularly

x

when children or teenagers view 3D images.

Photosensitive Seizure Warning and Other Health

x

Risks

Some viewers may experience an epileptic seizure –

or stroke when exposed to certain ﬂashing images

or lights contained in certain television pictures or

video games. If you or any of your relatives has a

history of epilepsy or strokes, please consult with

a medical specialist before using the 3D function.

Do not watch 3D pictures when you feel –

incoherent, sleepy, tired or sick. Avoid watching

3D pictures for long hours.

Even those without a personal or family history –

of epilepsy or stroke may have an undiagnosed

condition that can cause “photosensitive epileptic

seizures.”

If you experience any of the following symptoms –

immediately stop watching 3D pictures and

consult a medical specialist: (1) altered vision; (2)

lightheadedness; (3) dizziness; (4) involuntary

movements such as eye or muscle twitching;

(5) confusion; (6) nausea; (7) loss of awareness;

(8) convulsions; (9) cramps; and/ or (10)

disorientation. Parents should monitor and ask

their children about the above symptoms-children

and teenagers may be more likely than adults to

experience these symptoms.

Note that watching TV while sitting too close to the

x

screen for an extended period of time may weaken

your eyesight.

Note that watching TV while wearing 3D Active

x

Glasses for an extended period of time may cause a

headache or fatigue. If you feel headache, fatigue or

dizziness, stop watching TV and rest.

Some 3D pictures may startle viewers. The pregnant,

x

elderly, epileptic and those suffering from serious

physical conditions are advised to avoid utilizing the

unit’s 3D functionality.

We do not recommend watching 3D if you are in bad

x

physical condition, need sleep or have been drinking

liquor.

Please take care to be aware of the world around

x

you. This product is designed to be immersive. DO

NOT use this product near open stairwells, cables,

balconies, or other objects that can be tripped over,

run into, knocked down, broken or fallen over. Being

startled or deluding yourself into thinking that the 3D

images are real may cause you to crush a nearby

object or get injured trying to move your body.

Do not use the 3D Active Glasses for any other

x

purpose than for which it was designed. Wearing the

3D Active Glasses for any other purpose (as general

spectacles, sunglasses, protective goggles, etc.)

may physically harm you or weaken your eyesight.

When watching 3D images, turn on 3D Active

x

Glasses.

Turn off 3D Active Glasses while not using. If you leave

x

3D Active Glasses on, battery lifespan is shortened.

Be careful that children do not place the batteries

x

intheir mouths when removed from the 3D Active

Glasses. Place the battery in a location that children

or infants cannot reach.

Immersive video can potentially have adverse effects

x

on the user including motion sickness, perceptual

after effects, disorientation, eye strain, and

decreased postural stability. Take frequent breaks to

lessen the potential of these effects, as is commonly

suggested for other items, such as keyboards and

computer monitors, that you may tend to fixate or

concentrate on. If your eyes show signs of fatigue or

dryness or if you have any of the above symptoms,

immediately discontinue use of this device and do

not resume using it for at least thirty minutes after

the symptoms have subsided.

The ideal viewing distance should be three times

x

or more the height of the screen. We recommend

sitting with viewer’s eyes on a level with the screen.

3D

This exciting new feature enables you to

view 3D content. In order to fully enjoy

this feature, you must purchase a pair of

Samsung 3D Active Glasses (SSG-2100AB,

SSG-2200AR, SSG-2200KR) to view 3D

video.

Samsung 3D Active Glasses are sold separately. For more

detailed purchasing information, contact the retailer where

you purchased this TV.

P

POWER

FAV . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

CC

MTS

INFO

SLEEP

TOOLS

MEDIA.P

CONTENT

3D

CH LIST

D

Y A HOO

CH LIST

@

TV

INTERNET

BN68-02584A_Eng.indb 18 2010-03-29 �� 3:41:11

19

English

03 Basic Features

3D emitter

If there is any obstacle between the emitter and 3D

✎

Active Glasses, the proper 3D effect may not be

obtained.

3D Mode

■ : Select the 3D input format.

If you want to feel the 3D effect fully, please wear

✎

the 3D Active Glasses first, and then select 3D

Mode from the list below that provides the best

3d viewing experience.

3D Mode Operation

Off Turns the 3D function off.

2D → 3D

Changes a 2D image to 3D.

Side by Side Displays two images next to

each other.

Top & Bottom Displays one image above

another.

Line by Line Displays the images for the

left and right eye alternately

in rows.

Vertical Stripe Displays the images for the

left and right eye alternately in

columns.

Checker Board Displays the images for the

left and right eye alternately

in pixels.

Frequency Displays the images for the

left and right eye alternately in

frames.

“Side by Side” and “Top & Bottom” are available

✎

when the resolution is 720p, 1080i and 1080p in

DTV, HDMI and USB mode or when set to PC

and the PC is connected through an HDMI/DVI

cable.

“Vertical Strip”, “Line by Line” and “Checker

✎

Board” are available when the resolution is set to

PC and the PC is connected through an HDMI/

DVI cable.

“Frequency” displays the frequency (60Hz only)

✎

when the resolution is set to PC.

3D

■ → 2D (Off / On): Displays the image for the left eye

only.

This function is deactivated when

✎

3D Mode is set

to “2D → 3D” or Off.

3D View point

■ : The overall adjustment of 3D

perspective.

This function is deactivated when

✎

3D Mode is set

to “2D → 3D” or Off.

Depth ■ : Adjusts focus / depth in “2D → 3D” mode.

This function is only activated when the

✎

3D Mode

is “2D → 3D”.

Picture Correction

■ : Adjusts the images for the left and

right eye.

3D Auto View (Off / On)

■ : If 3D Auto View is set to On,

a “Side-By-Side” format HDMI signal with one of the

resolutions below is automatically switched to 3D. Here,

correct 3D information must be sent from the HDMI 1.3

transmitter.

If a 3D failure occurs due to a 3D information error,

✎

set 3D Auto View to Off and manually select a 3D

Mode using the 3D button or corresponding menu.

Support resolution (16:9 only)

✎

Resolution Frequency (Hz)

1280 x 720p 60 Hz

1920 x 1080i 60 Hz

1920 x 1080p 24 / 30 / 60 Hz

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x

1080 input.

An input resolution other than 1920 x 1080 may not be

displayed properly in 3D display or full screen mode.

How to watch the 3D image

1. Press the CONTENT button, then the Content View

menu will appear.

2. Press the ◄ or ► button, then select 3D.

To watch in 3D, wear 3D Active Glasses and press

the power button on the glasses.

Watching 3D picture for a long time may cause eye

fatigue and/or dizziness.

3. Select OK, then press the ENTERE button.

4. Using the ◄ or ► buttons on your remote control,

selects the 3D Mode of the image you want to view.

Some 3D modes may not be available depending

✎

on the format of the image source.

3D

OK

To watch in 3D, wear 3D glasses and press the

power button on the glasses.

Watching 3D picture for a long time may cause

eye fatigue and/or dizziness.

Cancel

U

Move

E

Enter

e

Exit

3D3D

Using the LEFT / RIGHT keys on the remote control,

select the icon suitable for the picture on screen.

Using the LEFT / RIGHT keys on the remote control,

select the icon suitable for the picture on screen.

U

Move

E

Enter

e

Exit

U

Move

E

Enter

e

Exit

BN68-02584A_Eng_New.indd 19 2010-03-29 �� 5:51:23

20

English

Basic Features

Supported formats and operating speciﬁcations for HDMI 1.4

Source signal format Standard HDMI 1.4 3D

1920x1080p@24Hz x 2 1920x2205p@24Hz

1280x720p@60Hz x 2 1280x1470p@60Hz

The mode is automatically switched to 3D mode for the 3D

video input in one of the formats above.

For the HDMI 1.4@24Hz format, the TV is optimized as

follows:

Resolution First Display Mode – : If Auto Motion

Plus is set to Off, Clear or Standard, you can

watch the video at a high resolution optimized to the

resolution of the source video.

Judder Reduction Display Mode – : When Auto

Motion Plus is set to Smooth or Custom, you can

watch a smooth picture without judder.

Before using 3D function...

NOTE

✎

You may notice a small amount of screen flickering

x

when watching 3D images in poor light conditions

(from a strobe light, etc.), or under a fluorescent lamp

(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the

light or turn the lamp off.

3D mode is automatically disabled in following cases:

x

when changing a channel or the input source, or

accessing Media Play or Internet@TV.

Some Picture functions are disabled in

x

3D mode.

PIP

x

is not supported in 3D mode.

3D Active Glasses from other manufacturers may not

x

be supported.

When the TV is initially powered on, may take some

x

time until the 3D display is optimized.

The 3D Active Glasses may not work properly if there

x

is any other 3D product or electronic devices turned

on near the glasses or TV. If there is a problem, keep

other electronic devices as far away as possible from

the 3D Active Glasses.

Photos

x

of Media Play are shown in “2D → 3D”

mode only.

If lying on your side, the 3D-effects may not be

x

displayed.

Be sure to stay within the viewing angle and optimum

x

TV viewing distance when watching 3D pictures.

Otherwise, you may not be able to enjoy proper –

3D effects.

If the TV Emitter becomes disconnected due to

x

either a change in the viewing angle or distance,

the 3D Active Glasses turn off automatically after

30 seconds. If this occurs, the red LED blinks three

times.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

Sound Menu

Changing the Preset Sound Mode ¦

MENU

O m

→ Sound → SRS TheaterSound →

ENTER

E

SRS TheaterSound

t

Standard ■ : Selects the normal sound mode.

Music ■ : Emphasizes music over voices.

Movie ■ : Provides the best sound for movies.

Clear Voice ■ : Emphasizes voices over other sounds.

Amplify ■ : Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing

impaired.

Adjusting sound settings ¦

MENU

O m

→ Sound → Equalizer → ENTER

E

Equalizer

Adjusts the sound mode (standard sound mode only).

Balance L/R ■ : Adjusts the balance between the right and

left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz ■ (Bandwidth

Adjustment): Adjusts the level of speciﬁc bandwidth

frequencies.

Reset ■ : Resets the equalizer to its default settings.

Sound Settings ¦

SRS TruSurround HD (Off / On)

t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers or headphones using

HRTF (Head Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice

over background music or sound effects so that dialog

canbe heard more clearly.

BN68-02584A_Eng.indb 20 2010-03-29 �� 3:41:13

La page charge ...

Samsung LN46C750 Le manuel du propriétaire

Ce manuel convient également à

Samsung LN46C750 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents