Samsung LN55C750R2F Manuel utilisateur

Catégorie
Téléviseurs LED
Taper
Manuel utilisateur

Ce manuel convient également à

LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de
atención al cliente de SAMSUNG.
Country Customer Care Center
Web Site Address
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
BN68-02584A-06
LCD TV
user manual
BN68-02584A_Eng.indb 1 2010-08-31 �� 9:16:35
2
English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-
motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model
offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on
nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture
sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as
burned-in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT•
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original
Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and
from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or
workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
In the United States : 1-800-SAMSUNG (1-800-726-7864)
In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock
or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image
quality. To reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.•
Always try to display any image on full screen, use TV set picture format menu for best possible match.•
Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •
process.
Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02584A_Eng.indb 2 2010-08-31 �� 9:16:35
3
Contents
English
ENGLSH
Getting Started
List of Features y ......................................................... 4
Accessories y .............................................................. 4
Installing the LCD TV Stand y ...................................... 4
Viewing the Control Panel y ......................................... 5
Viewing the Remote Control y ...................................... 6
Connecting to an Antenna y ........................................ 7
Plug & Play (Initial Setup) y ........................................... 7
Connections
Connecting to an AV Device y ...................................... 8
Connecting to an Audio Device y ................................. 9
Connecting to a PC y ................................................ 10
Changing the Input source y ...................................... 11
Basic Features
How to Navigate Menus y .......................................... 12
Channel Menu y ........................................................ 12
Seeing Channels 12
Using Favorite Channels 13
Memorizing channels 13
Editing channels 13
Other Features 13
Picture Menu y .......................................................... 14
Changing the Preset Picture Mode 14
Adjusting picture settings 15
Economical Solutions 15
Setting up the TV with your PC 15
Changing the Picture Options 16
Viewing TV using the 3D function 18
Sound Menu y .......................................................... 20
Changing the Preset Sound Mode 20
Adjusting sound settings 20
Sound Settings 20
Setup Menu y ............................................................ 21
Setting the Time 21
Using the Sleep Timer 22
Setting the On/Off Timer 22
Locking Programs 22
Other Features 24
Picture In Picture (PIP) 25
Support Menu y ......................................................... 25
Advanced Features
Network Connection y ............................................... 27
Connecting to a Wired Network 27
Connecting to a Wireless Network 29
Media Play y .............................................................. 34
Connecting a USB Device 34
Connecting to the PC through network 34
Screen Display 36
Playing Multiple Files 39
Media Play - Additional Functions 39
Anynet+ y ................................................................. 41
Setting Up Anynet+ 42
Switching between Anynet+ Devices 42
Recording 42
Listening through a Receiver 43
Troubleshooting for Anynet+ 43
Internet@TV y ............................................................ 44
Getting Started with Internet@TV 44
Setting up Internet@TV 45
Using the Internet@TV service 47
Troubleshooting for Internet@TV 50
AllShare y .................................................................. 51
About AllShare 51
Setting Up AllShare 51
Other Information
Assembling the Cables y ........................................... 53
Anti-theft Kensington Lock y ...................................... 53
Installing the Wall Mount y ......................................... 53
Securing the TV to the Wall y ..................................... 55
Troubleshooting y ...................................................... 56
Storage and Maintenance 58
Specifications y ......................................................... 59
License 59
Dimensions y ............................................................. 60
Index y ...................................................................... 61
Check the Symbol!
t
O
This function can be used by pressing the
TOOLS button on the remote control.
Note :
Important information
Step by step guide :
Informs you how to access
the menu.
P
POWER
F A V . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
MEDIA.P
CONTENT
CH LIST
D
YAHOO
CH LIST
@
TV
INTERNET
BN68-02584A_Eng.indb 3 2010-08-31 �� 9:16:36
4
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y
without a cable box / STB (Set-Top-Box) satellite receiver.
Media Play y : Allows you to play music files, pictures, and movies saved on a USB or your PC. (P. 34)
Internet@TV y : You can use various Internet services and view useful information and entertaining content. (P. 44)
AllShare y : AllShare connects your TV and compatible Samsung mobile phones/devices through a network. (P. 51)
Self Diagnosis y : You can check picture and sound operation. (P. 26)
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
Remote Control (BN59-01043A) & Batteries (AAA x 2) y
Owner’s Instructions y
Warranty Card / Safety Guide / Quick Setup Guide y
Cleaning Cloth (BN63-01798B) y
Power Cord y
Blanking Bracket y
(BN63-06339A)
Cable Tie y
(BN61-05596A)
Holder-Ring (4ea) y
(BN61-04529A)
Installing the LCD TV Stand
Components
When installing the stand, use the provided components and parts.
Stand Guide Stand Screws
Getting Started
English
Make sure to distinguish between the front and back of the Stand
and Guide Stand when assembling them.
Make sure that at least two persons lift and move the LCD TV.
Stand the product up and fasten the screws. If you fasten the
screws with the LCD TV placed down, it may lean to one side.
A B
1 EA 1 EA
4EA (M4 X L8)
4EA (M4 X L12)
C
D
2
Front
A
1
Top View
D
4EA
4EA
Rear
B
C
Bottom View
3
BN68-02584A_Eng.indb 4 2010-08-31 �� 9:16:37
5
01 Getting Started
English
Viewing the Control Panel
The product color and shape may vary depending on the model.
P
(Power)
Turns the TV on or off.
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
E
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER
E
button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
y
Adjusts the volume. In the OSD, use the
y
buttons as you would use the
and buttons on the remote control.
z
Changes the channels. In the OSD, use the
z
buttons as you would use the
and buttons on the remote control.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Power IndicatorRemote control sensor
Speakers
BN68-02584A_Eng.indb 5 2010-08-31 �� 9:16:38
6
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel,
Volume buttons.
PRE-CH
CH
VOL
MENU
MUTE
@
TV
RETURN
CH LIST
EXIT
ABCD
CONTENTINTERNET
FAV . CH
MEDIA.P
CC
YA HOO!
P . SIZE
TOOLS
INFO
Getting Started
English
Installing batteries (Battery size: AAA)
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid use when nearby fluorescent lights or neon
signs.
The color and shape may vary depending on the model.
x
Press to display information on the TV screen.
(P. 21)
Changes channels.
Returns to the previous channel.
Turns the remote control light on and off.
When on, the buttons become illuminated for a
moment when pressed.
(Using the remote control with this button set to
off will reduce the battery usage time.)
Cuts off the sound temporarily.
Displays the main on-screen menu.
Exits the menu.
Buttons used in the Channel list,
Internet@TV, Media Play menu, etc.
MEDIA.P: Views Media Play. (P. 34)
YAHOO!: Runs Yahoo widget! (P. 48)
3D(
): Sets the 3D mode. (P. 18)
FAV.CH: Displays Favorite Channel Lists on the
screen. (P. 13)
P.SIZE: Choose the picture size. (P. 17)
CC: Controls the caption decoder. (P. 24)
Link to various Internet services. (P. 44)
Returns to the previous menu.
Quickly select frequently used functions.
Selects the on-screen menu items and
changes the values seen on the menu.
Displays the Content View, which
includes Channel List, Internet@TV,
Media Play, AllShare and 3D.
Displays the channel list on the screen. (P. 12)
Press to select additional channels (digital)
being broadcast by the same station. For
example, to select channel ‘54-3’, press
‘54’, then press ‘-’ and ‘3’.
Adjusts the volume.
Displays and selects the available video
sources. (P. 11)
Turns the TV on and off.
Use these buttons in Media Play and
Anynet+ modes.
(: controls recording on Samsung
recorders with the Anynet+ feature)
Press to directly access channels.
BN68-02584A_Eng.indb 6 2010-08-31 �� 9:16:38
7
01 Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the red button.
1
Selecting a language
Press the or button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER
FAV . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
MEDIA.P
CONTENT
CH LIST
D
YAHOO
CH LIST
@
TV
INTERNET
2
Selecting Store Demo
or Home Use
Press the or button, then press the ENTER
E
button.
Select the y Home Use mode. Store Demo Mode is for retail
environments.
To return the unit’s settings from y Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.
3
Selecting an antenna
Press the or button, then press the ENTER
E
button. Select Air, Cable or Auto.
In
Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the , , or button, then press the ENTER
E
button.
4
Selecting a channel The channel search will start automatically.
For more information, refer to Channel Auto Program. (P. 13)
Press the
ENTER
E
button at any time to interrupt the memorization process.
5
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
If you select the
Auto, set the daylight saving time.
Select the time zone which you live.
6
Viewing the HD
Connection Guide
The connection method for the best HD screen quality is displayed.
7
Enjoy your TV.
Press the ENTER
E
button.
If You Want to Reset This Feature...
MENU
O m
Setup Plug & Play ENTER
E
Cable
R-AUDIO-L
P
R PB Y
ANT OUT
VHF/UHF Antenna
Plug & Play
Time
Menu Language : English
Caption : Off
Security
Network
General
PIP : Off
Setup
or
Power Input
BN68-02584A_Eng.indb 7 2010-08-31 �� 9:16:39
8
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).
HDMI IN 1(DVI)
, 2(ARC), 3, 4 / PC/DVI AUDIO IN
For better picture and audio quality, connect to a digital device using an HDMI cable.
x
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
x
To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
x
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
x
occur.
A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
x
ethernet function via HDMI.
This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the
x
ARC function is supported by the HDMI IN 2(ARC) port only.
If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case,
set 3D Auto View or 3D Mode to Off.
The ARC function allows digital audio to output via the
x
HDMI IN 2(ARC) port. It can be enabled only when the
TV is connected with an audio receiver that supports the ARC function.
Device
R-AUDIO-L
P
R PB Y
DVI OUT
R-AUDIO-L
P
R PB Y
AUDIO OUT
Red White
BD/DVD player/
HD cable/Sat. box
R-AUDIO-L
P
R PB Y
HDMI OUT
English
ConnectionsConnections
BN68-02584A_Eng.indb 8 2010-08-31 �� 9:16:41
9
Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the
x
DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
AUDIO OUT
: Connects to the audio input jacks on your amplifier/home theater.
When connecting, use the appropriate connector (sold separately).
x
When an audio amplifier is connected to the
x
AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
R-AUDIO-L
P
R PB Y
COMPONENT OUT
R-AUDIO-L
P
R PB Y
AUDIO OUT
Blu-ray player
WY
W Y
B
G
R
W
W
B
G
R
R
R
R
R
R-AUDIO-L
P
R PB Y
VIDEO OUT
VCR
R-AUDIO-L
P
R PB Y
AUDIO OUT
When connecting to
AV IN 1, the
color of the AV IN 1 [Y/VIDEO] jack
(Green) does not match the color of
the video cable (Yellow).
For better picture quality, the
Component connection is
recommended over the A/V
connection.
W W
B
G
RR
W
Y
Yellow Red White Red Blue Green
English
02 Connections
DVD
Home Theater
R-AUDIO-L
P
R PB Y
OPTICAL
R-AUDIO-L
P
R PB Y
AUDIO IN
Red White
W W
B
G
RR
W
Y
Digital audio system
BN68-02584A_Eng.indb 9 2010-08-31 �� 9:16:44
10
English
Connections
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920X1080@60Hz.
Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)
IBM
640 x 350 31.469 70.086 25.175 +/-
720 x 400 31.469 70.087 28.322 -/+
MAC
640 x 480 35.000 66.667 30.240 -/-
832 x 624 49.726 74.551 57.284 -/-
1152 x 870 68.681 75.062 100.000 -/-
VESA CVT
720 x 576 35.910 59.950 32.750 -/+
1152 x 864 53.783 59.959 81.750 -/+
1280 x 720 56.456 74.777 95.750 -/+
1280 x 960 75.231 74.857 130.000 -/+
VESA DMT
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.861 72.809 31.500 -/-
640 x 480 37.500 75.000 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 48.077 72.188 50.000 +/+
800 x 600 46.875 75.000 49.500 +/+
1024 x 768 48.363 60.004 65.000 -/-
1024 x 768 56.476 70.069 75.000 -/-
1024 x 768 60.023 75.029 78.750 +/+
1152 x 864 67.500 75.000 108.000 +/+
1280 x 1024 63.981 60.020 108.000 +/+
1280 x 1024 79.976 75.025 135.000 +/+
1280 x 800 49.702 59.810 83.500 -/+
1280 x 800 62.795 74.934 106.500 -/+
1280 x 960 60.000 60.000 108.000 +/+
1280 x 720 45.000 60.000 74.250 +/+
1360 x 768 47.712 60.015 85.500 +/+
1440 x 900 55.935 59.887 106.500 -/+
1440 x 900 70.635 74.984 136.750 -/+
1680 x 1050 65.290 59.954 146.250 -/+
VESA GTF
1280 x 720 52.500 70.000 89.040 -/+
1280 x 1024 74.620 70.000 128.943 -/-
VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+
NOTE
For HDMI/DVI cable connection, you must use the
x
HDMI IN 1(DVI) jack.
The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
R-AUDIO-L
P
R PB Y
AUDIO OUT
R-AUDIO-L
P
R PB Y
AUDIO OUT
R-AUDIO-L
P
R PB Y
DVI OUT
R-AUDIO-L
P
R PB Y
PC OUT
BN68-02584A_Eng.indb 10 2010-08-31 �� 9:16:45
11
English
02 Connections
Changing the Input source
Source List
MENU
O m
Input Source List ENTER
E
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite
receiver.
TV / PC / AV1 / AV2 / Component1 / Component2 / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
You can only choose external devices that are connected to the TV. In the
Source List,
connected inputs will be highlighted.
PC
always stay activated.
Edit Name
MENU
O m
Input Edit Name ENTER
E
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input
source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the
HDMI IN 1(DVI) port, you should set to
DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode
under Edit Name.
EX-LINK
Connector for service only.
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
P
POWER
FAV . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
MEDIA.P
CONTENT
CH LIST
D
YAHOO
CH LIST
@
TV
INTERNET
BN68-02584A_Eng.indb 11 2010-08-31 �� 9:16:46
12
English
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
PRE-
CH
CH
VO
L
MUT
E
@
TV
C
H LI
ST
A
B
C
D
CONTEN
T
INTERNET
FAV . CH
MEDIA.
P
CC
Y A H
OO
!
P.SIZ
E
3
D
T
OO
L
S
I
NF
O
MENU
RETURN
EXIT
1
2
3
4
1 MENU button: Displays the main on-screen menu.
2 ENTER
E
/ Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU
m
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
2
▲ / ▼
Select an icon with the or
button.
3
ENTER
E
Press ENTER
E
to access the
sub-menu.
4
▲ / ▼
Select the desired submenu with
the or button.
5
◄ / ►
Adjust the value of an item with the
or button. The adjustment in
the OSD may differ depending on
the selected menu.
6
ENTER
E
Press ENTER
E
to confirm the
selection.
7
EXIT
e
Press EXIT.
Channel Menu
Seeing Channels ¦
Channel List
MENU
O m
Channel Channel List ENTER
E
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
Select a channel in the All Channels, Added
Channels, Favorite or Programmed
screen by pressing the / buttons, and
pressing the ENTER
E
button. Then you
can watch the selected channel.
All Channels: Shows all currently available
channels.
Added Channels: Shows all added channels.
*
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
programs.
Using the color buttons with the
Channel List
ABCD
x
Red (Antenna): Switches to Air or Cable.
ABCD
x
Green (Zoom): Enlarges or shrinks a channel
number.
ABCD
x
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
c
mark appears to the left of the selected channels.
x
(Page): Move to next or previous page.
T
x
(Tools): Displays the Channel List option menu.
(The Options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons Operations
c
A channel selected.
*
A channel set as a Favorite.
)
A reserved Program.
(
A program currently being broadcast.
P
POWER
FAV . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
MEDIA.P
CONTENT
CH LIST
D
YAHOO
CH LIST
@
TV
INTERNET
Basic Features
Added Channels
6 Air
6-1 ♥ TV #6
7 Air
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air
A
Antenna
B
Zoom
C
Select Page T Tools
BN68-02584A_Eng.indb 12 2010-08-31 �� 9:16:48
13
English
03 Basic Features
Using Favorite Channels ¦
MENU
O m
Channel Channel List ENTER
E
*
Add to Favorite / Delete from Favorite
t
Set channels you watch frequently as
Favorites.
1. Select a channel and press the TOOLS
button.
2. Add or delete a channel using the Add to
Favorite or Delete from Favorite menu
respectively.
Memorizing channels ¦
MENU
O m
Channel ENTER
E
Antenna (Air / Cable)
t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
Air : Air antenna signal.
Cable : Cable antenna signal.
Auto : Air and Cable antenna.
NOTE
When selecting the Cable TV system: Selects the
x
cable system. STD, HRC and IRC identify various
types of cable TV systems. Contact your local cable
company to identify the type of cable system that
exists in your particular area. At this point, the signal
source has been selected.
After all the available channels are stored, it starts
x
to remove scrambled channels. The Auto program
menu then reappears.
How to Stop Auto Programming
1. Press the ENTER
E
button.
2. A message will ask Stop Auto Program? Select Yes by
pressing the or button.
3. Press the ENTER
E
button.
Editing channels ¦
MENU
O m
Channel Channel List ENTER
E
Channel Name Edit
t
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features ¦
MENU
O m
Channel ENTER
E
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTER
E
button to select Stop.
2. Press the button to select Yes.
3. Press the ENTER
E
button.
This function is only available in
Cable mode.
Added Channels
6 Air
6-1 ♥ TV #6
7 Air
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air
A
Antenna
B
Zoom
C
Select Page T Tools
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
P
POWER
FAV . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
MEDIA.P
CONTENT
CH LIST
D
YAHOO
CH LIST
@
TV
INTERNET
BN68-02584A_Eng.indb 13 2010-08-31 �� 9:16:48
14
English
Basic Features
Channel List
MENU
O m
Channel Channel List ENTER
E
Channel List Option Menu
t
Set each channel using the Channel List menu options (Add/
Delete, Timer Viewing, Select All/ Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete : Delete or add a channel to display the
channels you want.
NOTE
All deleted channels will be shown on the
x
All
Channels menu.
A gray-colored channel indicates the channel
x
has been deleted.
The
x
Add menu only appears for deleted
channels.
Delete a channel from the
x
Added Channels or
Favorite menu in the same manner.
Timer Viewing : You can set a desired channel to be
displayed automatically at the intended time. Set the
current time first to use this function. (P. 21)
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for
entering the date and time.
If you selected
Once, Every Week or Every Day
in Repeat, you can enter the date you want.
4.
Select OK, then press the ENTERE button when done.
NOTE
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
x
Programmed menu.
When a digital channel is selected, press the
x
button to view the digital program.
Select All : Select all the channels in the channel list.
Deselect All : Deselect all the selected channels.
You can only select
Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved to
watch.
1. Press the
ENTERE
button to select Channel List.
2. Press the and button move to the Programmed
menu.
Change Info : Change a show you have reserved to
watch.
Cancel Schedules : Cancel a show you have reserved
to watch.
Information : Display a show you have reserved
to watch. (You can also change the reservation
Information.)
Select All / Deselect All : You can select or deselect all
channels in the channel list.
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually.
Select y Fine Tune in the Channel menu.
Fine tuned channels that have been saved are marked
with an asterisk “
*
” on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select
Reset.
Picture Menu
Changing the Preset Picture Mode ¦
MENU
O m
Picture Mode ENTER
E
Mode
t
Select your preferred picture type.
Dynamic : Suitable for a bright room.
Standard : Suitable for a normal environment.
Natural : Suitable for an eye comfortable display.
Natural
is not available in PC mode.
Movie : Suitable for watching movies in a dark room.
BN68-02584A_Eng.indb 14 2010-08-31 �� 9:16:48
15
English
03 Basic Features
Adjusting picture settings ¦
MENU
O m
Picture Backlight ENTER
E
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
NOTE
When you make changes to
x
Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each
x
external device connected to the TV.
Lowering picture brightness reduces power
x
consumption.
Economical Solutions ¦
ECO Solution
MENU
O m
Picture ECO Solution ENTER
E
Energy Saving (Off / Low / Medium / High / Picture
Off / Auto): This adjust the brightness of the TV in order
to reduce power consumption. If you select Picture
Off, the screen is turned off , but the sound remains on.
Press any button to turn on the screen again.
Eco Sensor (Off / On) : To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
If you adjust the
Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
If
Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) :
Sets how quickly the TV switches to standby mode, if no
picture is being received.
Disabled when the PC is in power saving mode.
Setting up the TV with your PC ¦
Set the input source to PC.
Auto Adjustment
t
MENU
O m
Picture Auto Adjustment
ENTER
E
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting through HDMI/DVI
cable.
Screen
Coarse / Fine : Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Position : Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the or button to adjust
the Vertical-Position. Press the or button to adjust
the Horizontal-Position.
Image Reset : Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) [Optimum: 1920 X y
1080 pixels]
If a vertical-frequency option exists on your display y
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.
Otherwise, just click ‘OK’ and exit the dialog box.
BN68-02584A_Eng.indb 15 2010-08-31 �� 9:16:48
16
English
Basic Features
Changing the Picture Options ¦
Advanced Settings
MENU
O m
Picture Advanced Settings
ENTER
E
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have
more precise pictures.
In
PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Black Tone (Off / Dark / Darker / Darkest) : Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High) :
Adjust the screen contrast.
Shadow Detail : Increase the brightness of dark images.
Disabled under
PC mode.
Gamma : Adjust the primary color intensity.
Expert Pattern (Off / Pattern 1 / Pattern 2): By
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
While the
Expert Pattern is running, sound is not
output.
Only enabled on DTV / Component / HDMI.
RGB Only Mode (Off / Red / Green / Blue) : Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
Color Space (Auto / Native / Custom) : Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
White Balance : Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
10p White Balance (Off / On) : Controls the white
balance in 10 point interval by adjusting the red, green,
and blue brightness.
Available when the picture mode is set to
Movie
and when the external input is set to all input.
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
Flesh Tone : Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On) : Emphasize object
boundaries.
xvYCC (Off / On) : Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component IN jacks.
Available when the picture mode is set to
Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Shadow Detail : 0
Gamma : 0
Expert Pattern : Off
RGB Only Mode : Off
Color Space : Native
U Move E Enter R Return
BN68-02584A_Eng.indb 16 2010-08-31 �� 9:16:49
17
English
03 Basic Features
Picture Options
MENU
O m
Picture Picture Options
ENTER
E
In PC mode, you can only make changes to the
Color
Tone, Size and Auto Protection Time.
Picture Options
Color Tone : Normal
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Auto Motion Plus : Standard
U Move E Enter R Return
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1
or Warm2 will be deactivated when the
picture mode is Dynamic.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size : Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
NOTE
When Double (
x
À, Œ) mode has been set in PIP
(Picture-in-Picture), the Picture Size cannot be set.
After selecting
x
Zoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTER
E
button.
3. Press the or button to move the picture up
or down.
4. Press the ENTER
E
button.
5. Press the button to select Reset.
6. Press the ENTER
E
button to reset the picture
to its default position.
After selecting
x
Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the or button to select Position.
2. Press the ENTER
E
button.
3. Press the ▲, ▼, ◄ or button to move the
picture.
4. Press the ENTER
E
button.
5. Press the or button to select Reset.
6. Press the ENTER
E
button.
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
x
720p (1280x720)
Settings can be adjusted and stored for each
x
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best
possible signal.
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide an improved
picture quality.
Disabled under PC mode.
HDMI Black Level (Normal / Low) : Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode.
Film Mode (Off / Auto1 / Auto2) : Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
P
POWER
FAV . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
MEDIA.P
CONTENT
CH LIST
D
YAHOO
CH LIST
@
TV
INTERNET
BN68-02584A_Eng.indb 17 2010-08-31 �� 9:16:49
18
English
Basic Features
Auto Motion Plus (Off / Clear / Standard / Smooth
/ Custom / Demo): Enhances motion in fast moving
scenes.
The info screen on your TV displays the resolution
and frequency of the incoming video signal
(60Hz). This displayed frequency is not what the
TV is displaying by using the Auto Motion Plus
function.
Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
Viewing TV using the 3D function ¦
MENU
O m
Picture 3D ENTER
E
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES. Read and understand the following safety
information before using the TV’s 3D function.
WARNING
[
Some viewers may experience discomfort while
x
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and
rest.
Watching 3D images for an extended period of time
x
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses and
rest.
A responsible adult should frequently check on
x
children who are using the 3D function. If there are
any reports of tired eyes, headaches, dizziness, or
nausea, have the child stop viewing 3D TV and rest.
Do not use the 3D Active Glasses for other purposes
x
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
Do not use the 3D function or 3D Active Glasses
x
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving around
may result in injuries due to running into objects,
tripping, and/or falling.
3D
This exciting new feature enables you to
view 3D content. In order to fully enjoy
this feature, you must purchase a pair of
Samsung 3D Active Glasses (SSG-2100AB,
SSG-2200AR, SSG-2200KR) to view 3D
video.
Samsung 3D Active Glasses are sold separately. For more
detailed purchasing information, contact the retailer where
you purchased this TV.
3D emitter
If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
3D Mode
: Select the 3D input format.
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
Mode from the list below that provides the best
3d viewing experience.
When watching 3D images, turn on 3D Active
Glasses.
3D Mode Operation
Off Turns the 3D function off.
2D 3D
Changes a 2D image to 3D.
Side by Side Displays two images next to
each other.
Top & Bottom Displays one image above
another.
Line by Line Displays the images for the
left and right eye alternately
in rows.
Vertical Stripe Displays the images for the
left and right eye alternately in
columns.
Checker Board Displays the images for the
left and right eye alternately
in pixels.
Frame
Sequential
Displays the images for the
left and right eye alternately in
frames.
P
POWER
FAV . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
MEDIA.P
CONTENT
CH LIST
D
YAHOO
CH LIST
@
TV
INTERNET
BN68-02584A_Eng_New.indd 18 2010-09-03 �� 10:37:07
19
English
03 Basic Features
“Side by Side” and “Top & Bottom” are available
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
“Vertical Strip”, “Line by Line” and “Checker
Board” are available when the resolution is set to
PC and the PC is connected through an HDMI/
DVI cable.
“Frame Sequential” displays the frequency (60Hz
only) when the resolution is set to PC.
3D
2D (Off / On): Displays the image for the left eye
only.
This function is deactivated when
3D Mode is set
to “2D 3D” or Off.
3D View point
: The overall adjustment of 3D
perspective.
This function is deactivated when
3D Mode is set
to “2D 3D” or Off.
Depth
: Adjusts focus / depth in “2D 3D” mode.
This function is only activated when the
3D Mode
is “2D 3D”.
Picture Correction
: Adjusts the images for the left and
right eye.
3D Auto View (Off / On)
: If 3D Auto View is set to On,
a “Side-By-Side” format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a 3D
Mode using the 3D( ) button or corresponding
menu.
Support resolution (16:9 only)
Resolution Frequency (Hz)
1280 x 720p 60 Hz
1920 x 1080i 60 Hz
1920 x 1080p 24 / 30 / 60 Hz
3D Optimize
: The overall adjustment of 3D effect.
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
How to watch the 3D image
1. Press the CONTENT button, then the Content View
menu will appear.
2. Press the or button, then select 3D.
To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3. Select OK, then press the ENTERE button.
4. Using the or buttons on your remote control,
selects the 3D Mode of the image you want to view.
Some 3D modes may not be available depending
on the format of the image source.
Supported formats and operating specifications for
Standard HDMI 3D
The 3D formats indicated below are recommended by
the HDMI association and must be supported.
Source signal format Standard HDMI 1.4 3D
1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
3D
OK
To watch in 3D, wear 3D glasses and press the
power button on the glasses.
Watching 3D picture for a long time may cause
eye fatigue and/or dizziness.
Cancel
U
Move
E
Enter
e
Exit
3D3D
Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen.
Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen.
U
Move
E
Enter
e
Exit
U
Move
E
Enter
e
Exit
BN68-02584A_Eng_New.indd 19 2010-09-03 �� 10:37:07
20
English
Basic Features
The mode is automatically switched to 3D mode for the 3D
video input in one of the formats above.
For the Standard HDMI 3D format with 24Hz, the TV is
optimized as follows:
Resolution First Display Mode : If Auto Motion Plus
is set to Off, Clear or Standard, you can watch the
video at a high resolution optimized to the resolution of
the source video.
Judder Reduction Display Mode : When Auto Motion
Plus is set to Smooth or Custom, you can watch a
smooth picture without judder.
Before using 3D function...
NOTE
You m
x
ay notice a small amount of screen flickering
when watching 3D images in poor light conditions
(from a strobe light, etc.), or under a fluorescent lamp
(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the
light or turn the lamp off.
3D mode is automatically disabled in following cases:
x
when changing a channel or the input source, or
accessing Media Play or Internet@TV.
Some Picture functions are disabled in
x
3D mode.
PIP
x
is not supported in 3D mode.
3D Active Glasses from other manufacturers may not
x
be supported.
When the TV is initially powered on, may take some
x
time until the 3D display is optimized.
The 3D Active Glasses may not work properly if there
x
is any other 3D product or electronic devices turned
on near the glasses or TV. If there is a problem, keep
other electronic devices as far away as possible from
the 3D Active Glasses.
Photos
x
of Media Play are shown in “2D 3D”
mode only.
If you lie on your side while watching TV with 3D
x
Active Glasses, the picture may look dark or may not
be visible.
Be sure to stay within the viewing angle and optimum
x
TV viewing distance when watching 3D pictures.
Otherwise, you may not be able to enjoy proper
3D effects.
The ideal viewing distance should be three times
x
or more the height of the screen. We recommend
sitting with viewer's eyes on a level with the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
Sound Menu
Changing the Preset Sound Mode ¦
MENU
O m
Sound SRS TheaterSound
ENTER
E
SRS TheaterSound
t
Standard : Selects the normal sound mode.
Music : Emphasizes music over voices.
Movie : Provides the best sound for movies.
Clear Voice : Emphasizes voices over other sounds.
Amplify : Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Adjusting sound settings ¦
MENU
O m
Sound Equalizer ENTER
E
Equalizer
Adjusts the sound mode (standard sound mode only).
Balance L/R : Adjusts the balance between the right and
left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Reset : Resets the equalizer to its default settings.
Sound Settings ¦
SRS TruSurround HD (Off / On)
t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
BN68-02584A_Eng.indb 20 2010-08-31 �� 9:16:51
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184

Samsung LN55C750R2F Manuel utilisateur

Catégorie
Téléviseurs LED
Taper
Manuel utilisateur
Ce manuel convient également à