Candy GVW 5117LWHCS-S Le manuel du propriétaire

EN

FR

!

2

!

EN

3

Thank-you for choosing a Candy washing

machine. We are confident it will loyally

assist you in safely washing your clothes,

even delicates, day after day.

You can register your product at

www.registercandy.com to gain faster

access to supplementary services solely

reserved to our most loyal customers.

Carefully read this manual for correct and

safe appliance use and for helpful tips on

efficient maintenance.

Only use the washing machine

after carefully reading these instructions.

We recommend you always keep this

manual on hand and in good conditions for

any future owners.

Please check that the appliance is

delivered with this instruction manual,

warranty certificate, service centre address

and energy efficiency label. Also check that

plugs, curve for drain hose and liquid

detergent or bleach tray (only on some

models) are included. We recommend you

keep all these components.

Each product is identified by a unique 16-

character code, also called the “serial

number”, printed on the sticker affixed to

the appliance (porthole area) or in the

document envelope found inside the

product. This code is a sort of specific

product ID card that you will need to

register it and should you need to contact

the Candy Customer Service Centre.

This appliance is marked

according to the European directive

2002/96/EC on Waste Electrical and

Electronic Equipment (WEEE).

By ensuring this product is disposed of

correctly, you will help prevent potential

negative consequences for the environment

and human health, which could otherwise

be caused by inappropriate waste handling

of this product.

The symbol on the product indicates that

this product may not be treated as

household waste. Instead it shall be handed

over to the applicable collection point for the

recycling of electrical and electronic

equipment.

Disposal must be carried out in accordance

with local environmental regulations for

waste disposal.

For more detailed information about

treatment, recovery and recycling of this

product, please contact your local city office,

your household waste disposal service or the

shop where you purchased the product.

1. GENERAL SAFETY RULES

2. INSTALLATION

3. PRACTICAL TIPS

4. MAINTENANCE AND CLEANING

5. QUICK USER GUIDE

6. CONTROLS AND PROGRAMS

7. DRYING CYCLE

8. AUTOMATIC WASHING/DRYING CYCLE

9. CUSTOMER SERVICE CENTRE AND

WARRANTY

Environmental conditions

Contents

!

4

1. GENERAL SAFETY

RULES

! This appliances is intended to be

used in household and similar

applications such as:

- Staff kitchen areas in shops, offices

and other working environments;

- Farm houses;

- By clients in hotels, motels and

other residential type environments;

- Bed and breakfast type environments.

A different use of this appliance

from household environment or

from typical housekeeping

functions, as commercial use by

expert or trained users, is

excluded even in the above

applications. If the appliance is

used in a manner inconsistent with

this it may reduce the life of the

appliance and may void the

manufacturer’s warranty. Any

damage to the appliance or other

damage or loss arising through

use that is not consistent with

domestic or household use (even if

located in a domestic or household

environment) shall not be

accepted by the manufacturer to

the fullest extent permitted by law.

! This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance in a

safe way and understand the

hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

! Children should be supervised to

ensure that they do not play with

the appliance.

! Children of less than 3 years

should be kept away unless

continuously supervised.

! If the supply cord is damaged, it

must be replaced by the

manufacturer, its service agent or

similarly qualified persons in order to

avoid a hazard.

! Only use the hose-sets supplied

with the appliance for the water

supply connection (do not reuse

old hose-sets).

! Water pressure must be between

0,05 MPa and 0,8 MPa.

! Make sure that a carpet do not

obstruct the base of the machine

and ventilation openings.

! The OFF condition is reached by

placing the reference mark on the

programmes control/knob in the

vertical position. Any other different

position of such control sets the

machine in ON condition.

! The final part of a washer dryer

cycle occurs without heat (cool

down cycle) to ensure that the

items are left at a temperature

that ensures that the items will not

be damaged.

!

EN

5

! After installation, the appliance

must be positioned so that the

plug is accessible.

! The appliance must not be

installed behind a lockable door, a

sliding door or a door with a hinge

on the opposite side to that of the

washer dryer, in such way that a

full opening of the washer dryer

door is restricted.

! The maximum load capacity of

dry clothes depends on the model

used (see control panel).

! The appliance is not to be used if

industrial chemicals have been

used for cleaning.

! Do not dry unwashed items in the

washer dryer.

! Items that have been soiled with

substances such as cooking oil,

acetone, alcohol, petrol,

kerosene, spot removers,

turpentine, waxes and wax

removers should be washed in

hot water with an extra amount of

detergent before being dried in

the washer dryer.

! Items such as foam rubber (latex

foam), shower caps, waterproof

textiles, rubber backed articles

and clothes or pillows fitted with

foam rubber pads should not be

dried in the washer dryer.

! Fabric softeners, or similar

products, should be used as

specified by the fabric softener

instructions.

! Oil-affected items can ignite

spontaneously, especially when

exposed to heat sources such as

a washer dryer. The items

become warm, causing an

oxidation reaction in the oil,

Oxidation creates heat. If the heat

cannot escape, items can become

hot enough to catch fire. Piling,

stacking or storing oil-effected

items can prevent heat from

escaping and so create a fire

hazard.

! If it is unavoidable that fabrics

contain vegetable or cooking oil or

have been contaminated by hair

care products be placed in a

washer dryer they should first be

washed in hot water with extra

detergent - this will reduce, but

not eliminate, the hazard.

! Remove all objects from pockets

such as lighters and matches.

! To consult the product fiche please

refer to the manufacturer website.

! Before cleaning or maintaining the

washing machine, unplug the

appliance and turn off the water

faucet.

WARNING:

never stop a washer dryer before

the end of the drying cycle

unless all items are quickly

removed and spread out so that

the heat is dissipated.

Safety instructions

!

6

! Make sure the electrical system is

grounded. Otherwise, seek qualified

professional assistance.

! Please do not use converters,

multiple sockets or extension

cords.

! Make sure there is no water in the

drum before opening the porthole.

! Do not pull on the power cord or

appliance to unplug the machine.

! Do not expose the washing

machine to rain, direct sunlight or

other weather elements.

! When moving, do not lift the

washing machine by the knobs or

detergent drawer; during transport,

never rest the porthole on the

trolley. We recommend two people

lift the washing machine.

! In the event of fault and/or

malfunction, turn off the washing

machine, close the water faucet

and do not tamper with the

appliance.

Immediately contact the Customer

Service Centre and only use

original spare parts. Failure to

observe these instruction may

jeopardise appliance safety.

Appliance complies with

European Directives:

! 2006/95/EC (LVD);

! 2004/108/EC (EMC);

! 2009/125/EC (ErP);

! 2011/65/EU (RoHS)

and subsequent amendments.

WARNING:

water may reach very high

temperatures during the wash

cycle.

!

EN

7

2. INSTALLATION

! Cut the tube straps, being careful

not to damage the tube and

power cord.

! Unscrew the 2 or 4 screws (A) on

the back and remove the 2 or 4

shims (B) as illustrated in figure

1.

! Close the 2 or 4 holes using the

plugs included in the instruction

envelope.

! If the washing machine is built-in,

after cutting the hose straps,

unscrew the 3 or 4 screws (A)

and remove the 3 or 4 shims (B).

! In some models, 1 or more

shims will fall inside the machine:

tilt the washing machine forward

to remove them. Close the holes

using the plugs found in the

envelope.

! Place the polionda sheet on the

bottom as shown in figure 2

(according to the model, consider

version A, B or C).

A

B

1

3

2

1

3

1

2

A

C

B

2

WARNING:

keep packaging materials away

from children.

!

8

! Connect the water tube to the faucet, only

using the drain tube supplied with the

washing machine (fig. 3).

DO NOT OPEN THE FAUCET.

! Some models may include one or more of

the following features:

! HOT&COLD (fig. 4):

water mains connection settings with hot

and cold water for higher energy savings.

Connect the grey tube to the cold water

faucet and the red one to the hot water

faucet. The machine can be connected to

the cold water faucet only: in this case,

some programs may start a few minutes

later.

! AQUASTOP (fig. 5):

a device located on the supply tube that

stops water flow if the tube deteriorates;

in this case, a red mark will appear in the

window “A” and the tube must be

replaced. To unscrew the nut, press the

one-way lock device "B".

! AQUAPROTECT – SUPPLY TUBE WITH

GUARD (fig. 6):

Should water leak from the primary

internal tube "A", the transparent

containment sheath "B" will contain water

to permit the washing cycle to complete.

At the end of the cycle, contact the

Customer Service Centre to replace the

supply tube.

! Near the washing machine to the wall,

being careful that the tube is not bent or

crushed, and place the drain tube in the

tub or, preferably, connect it to a wall

drain at least 50 cm high with diameter

greater than the washing machine tube

(fig. 7).

3

1

4

B

A

5

B

A

6

min 50 cm

max 85 cm

+2,6 mt

max

max 100 cm

min 4 cm

7

Hydraulic connections

Setting

!

EN

9

! Level the appliance using the feet as

illustrated in figure 8:

a. turn the nut clockwise to release the

screw;

b. rotate the foot to raise or lower it until it

adheres to the floor;

c. lock the foot, screwing in the nut, until it

adheres to the bottom of the washing

machine.

! Plug in the appliance.

A

B

C

8

The detergent draw is split into 3

compartments as illustrated in figure 9:

! compartment "1": for prewash detergent;

! compartment “ ”: for special additives,

softeners, starch fragrances, etc.;

! compartment "2": for washing detergent.

A liquid detergent cup is also included in

some models (fig. 10). To use it, place it in

compartment "2". This way, liquid

detergent will only enter the drum at the

right time. The cup can also be used for

bleach when the “Rinse” program is

selected.

2

1

9

10

11

WARNING:

contact the Customer Service Centre

should the power cord need

replacement.

Detergent drawer

WARNING:

only use liquid products; the washing

machine is set to automatically dose

additives at each cycle during the last

rinse.

WARNING:

some detergents are hard to remove.

In this case we recommend using the

specific container to be placed in the

drum (example in figure 11).

!

10

3. PRACTICAL TIPS

WARNING: when sorting laundry, make

sure:

- have eliminated metallic objects such as

barrettes, pins, coins, from laundry;

- to have buttoned pillow cases, closed

zips, tied loose belts and long robe

ribbons;

- to have removed rollers from curtains;

- to have carefully read clothing washing

labels;

- to have removed any persistent stains

using specific detergents.

! When washing rugs, bedcovers or other

heavy clothing, we recommend you avoid

centrifuging.

! To wash wool, make sure the item can be

machine washed and marked by the

“Pure virgin wool” symbol with the “Does

not mat” or “Machine washable” label.

A guide environmentally friendly and

economic use of your appliance.

Maximise The Load Size

! Achieve the best use of energy, water,

detergent and time by using the

recommended maximum load size.

Save up to 50% energy by washing a full

load instead of 2 half loads.

Do you need to pre-wash?

! For heavily soiled laundry only!

SAVE detergent, time, water and

between 5 to 15% energy consumption

by NOT selecting Prewash for slight to

normally soiled laundry.

Is a hot wash required?

! Pretreat stains with stain remover or soak

dried in stains in water before washing to

reduce the necessity of a hot wash

programme.

Save up to 50% energy by using a 60°C

wash programme.

Before using a drying programme…

! SAVE energy and time by selecting a

high spin speed to reduce the water

content in laundry before using a drying

programme.

Following is a quick guide with tips and

recommendations on detergent use at the

various temperatures. In any case, always

read the instructions on the detergent for

correct use and doses.

Load tips

Helpful suggestions for the user

When washing heavily soiled whites,

we recommend using cotton

programs of 60°C or above and a

normal washing powder (heavy duty)

that contains bleaching agents that at

medium/high temperatures provide

excellent results.

For washes between 40°C and 60°C

the type of detergent used needs to be

appropriate for the type of fabric and

level of soiling.

Normal powders are suitable for “white”

or colour fast fabrics with high soiling,

while liquid detergents or “colour

protecting” powders are suitable for

coloured fabrics with light levels of

soiling.

For washing at temperatures below

40°C we recommend the use of liquid

detergents or detergents specifically

labeled as suitable for low temperature

washing.

For washing wool or silk, only use

detergents specifically formulated for

these fabrics.

!

EN

11

4. MAINTENANCE AND

CLEANING

To clean the washing machine exterior, use

a damp cloth, avoiding abrasives, alcohol

and/or solvents. The washing machine does

not require any special care for ordinary

cleaning: clean drawer compartments and

the filter; some tips on how to move the

machine or on long periods of disuse are

provided below.

! We recommend you clean the drawer to

avoid accumulating detergent and

additive residue.

! To do this, extract the drawer using slight

force, clean it with running water and

reinsert it in its housing.

! The washing machine comes with a

special filter able to trap large residue,

such as buttons or coins, which could

clog the drain.

! Only available on certain models: pull out

the corrugated hose, remove the stopper

and drain the water into a container.

! Before unscrewing the filter, we

recommend you place an absorbent cloth

under it to keep the floor dry.

! Turn the filter counter-clockwise to the

limit stop in the vertical position.

! Remove and clean the filter; when

finished, replace it turning it clockwise.

! Repeat the previous steps in reverse

order to reassemble all parts.

! Should the washing machine be stored in

an unheated room for a long period of

time, drain all water from tubes.

! Unplug the washing machine.

! Detach the tube from the strap and lower

it, fully draining water into a bowl.

! Secure the drain tube with the strap when

finished.

Drawer cleaning

Filter cleaning

Suggestions for moves or

prolonged disuse

!

12

5. QUICK USER GUIDE

This washing machine automatically adapts

the level of the water to the type and

quantity of washing. This system gives a

decrease in energy consumption and a

sensible reduction in washing times.

! Turn on the washing machine and select

the required program.

! Adjust the washing temperature if

necessary and press the required "option"

buttons.

! Press the START/PAUSE button to start

washing.

! The message "end" will appear on the

display or the corresponding led will turn

on at the end of the program.

! Turn off the washing machine.

For any type of wash, see the program

table and follow the operating sequence

as indicated.

Water pressure: min 0,05 Mpa / max 0,8 Mpa

Spin r.p.m.: See rating plate.

Power input / Power current fuse amp /

Supply voltage: See rating plate.

6. CONTROLS AND

PROGRAMS

A

B

HGILMNE

C

OPF

D

A

Programme selector with OFF

position

B

START/PAUSE button

C

SPIN SELECTION button

D

TEMPERATURE SELECTION

button

E

DELAY START button

F

STAIN LEVEL button

G

PREWASH button

H

HYGIENE PLUS button

I

EXTRA RINSE button

L

DRYING SELECTION button

M

MEMORY button

N

NIGHT & DAY button

O

Digital display

P

DOOR LOCKED indicator light

E+N

KEY LOCK

Program selection

DRYING

If you would like the drying cycle to

begin automatically after washing,

select the programme required using

the DRYING SELECTION button.

Or you can finish the wash and then

select the drying programme and

load size.

Wait until the porthole locked light

turns off: about 2 minutes after the

program ends.

Technical data

!

EN

13

! Press the START/PAUSE button to start

the selected cycle.

! Once a programme is selected the

programme selector remains stationary on

the selected programme till cycle ends.

! Switch off the washing machine by

turning the selector to OFF.

! Press to start the selected cycle.

ADD OR REMOVE ITEMS AFTER THE

PROGRAMMES HAS STARTED (PAUSE)

! Press and hold the START/PAUSE

button for about 2 seconds (some

indicator light and the time remaining

indicator will flash, showing that the

machine has been paused).

! Wait 2 minutes until the safety device

unlocks the door.

! After you have added or removed items,

close the door and press the

START/PAUSE button (the programme

will start from where it left off).

CANCELLING THE PROGRAMME

! To cancel the programme, set the

selector to the OFF position.

WARNING:

Don’t touch the display while inserting

the plug because the machines

calibrates the systems during the first

seconds: touching the display, the

machine couldn’t work property. In

this case, remove the plug and repeat

the operation.

Opening the door

A special safety device prevents the

door from being opened immediately

after the end of the cycle.

Wait for 2 minutes after the wash

cycle has finished and the "Door

Security" light has gone out before

opening the door.

Programme selector with OFF

position

When the programme selector is turned

the display lights up to show the settings

for the programme selected.

For energy saving, at the end of the

cycle or with an inactivity period, the

display level contrast will decrease.

N.B.: To switch the machine off, turn the

programme selector to the OFF

position.

The programme selector must be

returned to the OFF position at the end

of each cycle or when starting a

subsequent wash cycle prior to the next

programme being selected and started.

START/PAUSE button

Close the door BEFORE selecting the

button START/PAUSE.

When the START/PAUSE button has

been pressed, the appliance can take

few seconds before it starts working.

!

14

! By pressing this button, it is possible to

reduce the maximum speed, and if you

wish, the spin cycle can be cancelled.

spin speed cancelled.

! To reactivate the spin cycle press the button

until you reach the spin speed you would

like to set.

! It is possible to modify the spin speed

without pausing the machine.

! This button allows you to change the

temperature of the wash cycles.

cold wash.

! It is not possible to raise the temperature

over the maximum allowed for every

programme, in order to save the fabrics.

! This button allows you to pre-programme

the wash cycle to delay the start of the

cycle for up to 24 hours.

! To delay the start use the following

procedure:

- Set the required programme.

- Press the button once to activate it (h00

appears on the display) and then press

it again to set a 1 hour delay (h01

appears on the display). The pre-set

delay increases by 1 hour each time the

button is pressed, until h24 appears on

the display, at which point pressing the

button again will reset the delay start to

zero.

- Confirm by pressing the START/PAUSE

button (the light on the display starts to

flash). The countdown will begin and

when it has finished the programme will

start automatically.

! It is possible to cancel the delay start by

turning the programme selector to OFF.

If there is any break in the power supply

while the machine is operating, a special

memory stores the selected programme

and, when the power is restored, it

continues where it left OFF

! By selecting this button there is a choice

of 3 levels of wash intensity, depending

on how much the fabrics are soiled (can

be used only on some programmes as

shown in the table of programmes).

The option buttons should be selected

before pressing the START/PAUSE

button.

If an option is selected that is

not compatible with the selected

programme then the option indicator

first flashes and then goes off.

SPIN SELECTION button

To prevent damage to the fabrics, it is

not possible to increase the speed

over that which is automatically

suitable during the selection of the

program.

The machine is fitted with a special

electronic device, which prevents the

spin cycle should the load be

unbalanced.

This reduces the noise and vibration in

the machine and so prolongs the life of

your machine.

TEMPERATURE SELECTION button

DELAY START button

STAIN LEVEL button

!

EN

15

! Once the programme has been selected

the indicator light will automatically show

the stain level set for that programme.

! Selecting a different stain level the

relevant indicator will light up.

! This option allows you to make a prewash

and it is particularly useful for heavily

soiled loads (can be used only on

some programmes as shown in the

table of programmes).

! We recommend you use only 20% of the

recommended quantities shown on the

detergent pack.

With this option it is possible to hygienize

the clothes, the washing programme

reach a temperature of 60°C.

! This button allows you to add rinses at

the end of the washing cycle. The

maximum number of extra rinses is

related to the programme selected.

! This function has been studied for the

people with delicate and sensitive skin,

for which also a least residue of detergent

can cause irritations or allergies.

! It advises to also use this function for the

children items and in case of washings of

very dirty items, for which it is due to use

a lot of detergent, or in the washing of

toweling items whose fibres mostly have

the tendency to hold the detergent.

! Ensure that the programme selector is

not in the OFF position then press the

button to select the required drying

programme: an indicator will light to

display the drying result selected each

time you press the button.

! To cancel the selection before the start of

a drying programme, press the button

repeatedly until the indicators go out or

return the programme selector to the OFF

position.

! To cancel the cycle during the drying

phase, hold the button down for about 3

seconds until the cooling indicator lights

up.

! Given the high temperature inside the

drum, we recommend that you allow the

dryer to complete the cool down period

before returning the programme selector

to the OFF position and removing the

laundry.

This function allows you to save the settings

of your two favourite personalised

programmes, including the temperature,

spin speed and soil level, so you can recall

them quickly.

How to memorize a programme for the

first time:

1)

Select the programme and the

options you want.

2)

Press the MEMORY button, choosing

either M1 or M2. You should choose

M1 if this is the first programme you

have saved.

PREWASH button

HYGIENE PLUS button

EXTRA RINSE button

DRYING SELECTION button

MEMORY button

!

16

3)

Keep your finger on the MEMORY

button for about 3 seconds to save

the combination in the chosen

position.

Memorize a new programme when M1 &

M2 already have programmes saved:

1)

Set the programme and the options

you want.

2)

Press the MEMORY button for about

3 seconds to save the combination in

the position M1. The pre-existing

saved programme in M1 will move in

the position M2.

Start a program that is already

memorized

! Press briefly the MEMORY button (once

for M1, twice for M2) and press the

START/PAUSE button.

! Once you recall a memorized program,

you can still change its options and

settings, pressing the corresponding

keys. In this case, the added options

won’t be memorized.

! This option reduces the intermediate spin

speed to 400 rpm, where applicable,

increase the water level during rinsing

and keep the laundry immersed in water

after the final rinse, in order to spread the

fiber perfectly.

! During the phase in which the water is

held in the tub, the relevant indicator light

blink to show that the machine is at a

standstill.

! Deselect the option to end the cycle with

a spin dry (which may be reduced or

cancelled using the appropriate button)

and emptying phase.

! Thanks to electronic control, the water in

the intermediate phases is emptied

silently, making this option very useful for

washing at night.

! Pressing simultaneously the buttons

NIGHT & DAY and DELAY START for

about 3 seconds, the machine allows

you to lock the keys.

In this way, you can avoid making

accidental or unwanted changes if a

button on the display is pressed

accidently during a cycle.

! The key lock can be simply cancelled by

pressing the two buttons simultaneously

again or by turning the program knob to

OFF.

The display’s indicator system allows you to

be constantly informed about the status of

the machine.

2

13 14

1

615 10 12 5

7 7 7 7 7

8 9 411

3

16

1) DOOR LOCKED INDICATOR LIGHT

! The indicator light is illuminated when the

door is fully closed.

! When START/PAUSE is pressed on

the machine with the door closed, the

If you accidently select a memorized

program, simply turn the program

knob to select another one.

NIGHT & DAY button

KEY LOCK

Digital Display

Close the door BEFORE selecting the

START/PAUSE button.

!

EN

17

indicator will flash momentarily and then

illuminate.

! A special safety device prevents the door

from being opened immediately after the

end of the cycle. Wait for 2 minutes after

the wash cycle has finished and the

DOOR LOCKED light has gone out before

opening the door. At the end of the cycle

turn the programme selector to OFF.

2) SPIN SPEED

This show the spin speed of the selected

programme that can be changed or omitted

by the relevant button.

spin speed cancelled.

3) WASH TEMPERATURE

This show the washing temperature of the

selected programme that can be changed

(where allowed) by the relevant button.

cold wash.

4) CYCLE DURATION

! When a programme is selected the

display automatically shows the cycle

duration, which can vary, depending on

the options selected.

! Once the programme has started you will

be kept informed constantly of the time

remaining to the end of the wash.

! The appliance calculates the time to the

end of the selected programme based

upon a standard loading, during the cycle,

the appliance corrects the time to that

applicable to the size and composition of

the load.

! If automatic washing/drying is selected, at

the end of the wash phase, the drying time

remaining to the end will be shown on the

display.

5) STAIN LEVEL

! Once the programme has been selected,

the indicator light will automatically show

the stain level set for that programme.

! Selecting a different stain level the

relevant indicator will light up.

6) EXTRA RINSES

The indicator lights show the extra rinses

selected by the relevant button.

7) OPTIONS

The indicator lights show the options that

can be selected by the relevant buttons.

8) Wi-Fi (some models only)

! In the models with the Wi-Fi option, the

icon indicates that the Wi-Fi system is

working.

! For all other information in the Wi-Fi

system, there is a specific manual inside

the machine.

9) DELAY START

This flashes when delay start has been set.

10) Kg Check (function active only on

Cotton and Synthetics programmes)

! For the programmes where the "Kg

Check" function is active, the appliance

in the first minutes it calculates the real

laundry loaded, updating the levels on the

display in real time.

If the door is not properly closed,

the light will continue to flash for

about 7 seconds, after which the

start command will be automatically

delete. In this case, close the door

in the proper way and press the

START/PAUSE button.

!

18

Every levels shown on the display is the

20% of the maximum loading capacity.

When a programme is selected the

maximum capacity suggested is shown

on the display.

! Through every wash phase "Kg Check"

allows to monitor information on the wash

load in the drum and in the first minutes

of the wash it:

- adjusts the amount of water required;

- determines the length of the wash cycle;

- controls rinsing according to the type of

fabric selected to be washed it;

- adjusts the rhythm of drum rotation for

the type of fabric being washed;

- recognizes the presence of lather,

increasing, if necessary, the amount of

water during rinsing;

- adjusts the spin speed according to the

load, thus avoiding any imbalance.

11) MEMORY

The indicator light show that the memory

function is working.

12) KEY LOCK

The indicator light show that the keys are

locked.

13) TAP CLOSED

Indicates that the machine is unable to load

the water: it is suggested to turn off the

machine, check that the tap is open and the

water pressure is not particularly low.

14) FILTER BLOCKED

Indicates that the machine is not able to

drain the water: it is suggested to turn off

the machine, check that the filter is not

clogged or that the drain hose is not kinked

or crushed.

15) STANDARD COTTON PROGRAMMES

LIGHTS (see table of programmes)

The lights will light up when you select the

most efficient program in terms of water and

energy consumption, to wash cotton

garments with a normal grade of soil.

16) DRYING PROGRAMME INDICATORS

The indicators display the type of the drying

programme.

Automatic drying programmes

Extra dry programme (suitable for

towels, bathrobes and bulky loads).

Iron dry programme (that leaves the

laundry ready for ironing).

Cupboard dry programme (for

items that will be put away without

ironing).

! By selecting one of these automatic

programmes, the washer dryer will

calculate the time needed for drying and

the level of moisture remaining in the

laundry, according to the load and drying

type selected.

! After pressing the START/PAUSE button,

the display will show the drying time

remaining.

Timed drying programmes

They may be used to select timed

drying programmes.

The appliance calculates the time to

the end of the selected programme

based upon a standard loading.

During the cycle, the appliance

corrects the time according to the size

and composition of the load.

!

EN

19

Cool down phase

Activated during the final cool down

period, in the last 10/20 minutes of

each drying phase.

Useful tips

! The 30 minute drying programme is

recommended for small loads (less than 1

kg) or only slightly damp loads.

! Your washer dryer automatically ends the

cycle when it reaches the selected drying

level.

! In order to ensure the correct operation of

the appliance, it is advisable not to

interrupt the drying phase unless it is

absolutely necessary.

!

20

2

1

PROGRAM

kg *

(MAX.)

TEMP.°C

DETERGENT

Recommended

Max.

2

1

Perfect 20°C

Mix & Wash

1)

2)

4

5,5

6

6,5

7

20°

Intensive 40°

1)

2)

4

5,5

6

6,5

7

40°

Hygiene 60°

2)

4

5,5

6

6,5

7

60°

Perfect Rapid

59 Min

2)

2

3

3,5

40°

Rapid 30 Min

2)

2

2,5

30°

Rapid 14 Min

2)

1

1,5

30°

Drain + Spin 2)

-

Rinse 2)

-

Cottons**

1)

2)

6

8

9

10

11

60°

90°

( )

Acrylics

1)

2)

3

4

4,5

5

5,5

40°

60°

( )

Delicates

2

2,5

40°

Wool / Hand

2

30°

Acrylics

(drying)

3

4

4,5

5

5,5

-

Cottons

(drying)

4

5

6

7

-

Rapid W&D 59 Min

1,5

30°

Table of programmes

La page charge ...

Candy GVW 5117LWHCS-S Le manuel du propriétaire

Candy GVW 5117LWHCS-S Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents