Samsung LE32N7 Manuel utilisateur

LCD TV

LE32N7

LE40N7

LE46N7

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

Register your product at www.samsung.com/global/register

#/6

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits

Samsung, veuillez contacter le Service Consommateurs Samsung.

Country

BELGIUM

CZECH REPUBLIC

DENMARK

FINLAND

FRANCE

GERMANY

HUNGARY

ITALIA

LUXEMBURG

NETHERLANDS

NORWAY

POLAND

PORTUGAL

RUSSIA

SLOVAKIA

SPAIN

SWEDEN

U.K

UKRAINE

Customer Care Center

02 201 2418

844 000 844

38 322 887

09 693 79 554

08 25 08 65 65 (€ 0,15/Min)

01805 - 121213 (€ 0,12/Min)

06 40 985 985

199 153 153

02 261 03 710

0900 20 200 88 (€ 0.10/Min)

231 627 22

0 801 801 881

80 8 200 128

8-800-200-0400

0850 123 989

902 10 11 30

08 585 367 87

0870 242 0303

8-800-502-0000

Web Site

www.samsung.com/be

www.samsung.com/cz

www.samsung.com/dk

www.samsung.com/fi

www.samsung.com/fr

www.samsung.de

www.samsung.com/hu

www.samsung.com/it

www.samsung.lu

www.samsung.com/nl

www.samsung.com/no

www.samsung.com/pl

www.samsung.com/pt

www.samsung.ru

www.samsung.com/sk

www.samsung.com/es

www.samsung.com/se

www.samsung.com/uk

www.samsung.com/ur

BN68-01007U-01Cover.indd 1BN68-01007U-01Cover.indd 1 2006-08-24  8:34:542006-08-24  8:34:54

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the

left, right and center of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause a similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Précautions à prendre lors de l'affichage d'une image fixe

Une image fixe peut causer des dommages irrémédiables à l'écran du téléviseur.

• N'affichez pas une image fixe sur l'écran LCD plus de 2 heures. Cela pourrait provoquer une rémanence de l'image à l'écran. Cette

rémanence de l'image est également appelée "brûlure de l'écran".

Pour éviter une telle rémanence de l'image à l'écran, réduisez la luminosité et le contraste de l'écran lorsque vous laissez une image

fixe affichée.

• Regarder l'écran LCD du téléviseur en format 4:3 pendant une longue période peut laisser des traces de

bordures à gauche, à droite et au centre de l'écran, à cause de la différence d'émission de lumière sur

l'écran. La lecture d'un DVD ou l'utilisation d'une console de jeu peut avoir un effet similaire sur l'écran.

Les dommages provoqués par les effets qui précèdent ne sont pas couverts par la garantie.

• L'affichage d'images fixes de jeux vidéo et d'ordinateurs pendant plus longtemps qu'une période spécifique peut provoquer des

rémanences. Pour éviter cela, réduisez la "luminosité" et le "contraste" lors de l'affichage d'images fixes.

Still.indd 1Still.indd 1 2006-08-09  6:21:032006-08-09  6:21:03

English

English-1

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts ................................................................................... 3

Installing the Stand ................................................................... 3

Installing the Wall Mount Kit ............................................ 3

Viewing the Control Panel ...................................................... 4

Viewing the Connection Panel ............................................. 5

Viewing the Remote Control ................................................. 7

Installing Batteries in the Remote Control ....................... 7

Switching On and Off ............................................................... 8

Placing Your Television in Standby Mode ......................... 8

Plug & Play .................................................................................... 8

SETTING THE CHANNELS

Storing Channels Automatically ........................................... 9

Storing Channels Manually .................................................... 9

Setting the Channel Manager ............................................... 10

Activating the Child Lock ................................................... 11

Sorting the Stored Channels ................................................. 11

Assigning Channels Names .................................................... 12

Fine Tuning Channel Reception ........................................... 12

SETTING THE PICTURE

Changing the Picture Standard ............................................ 13

Adjusting the Custom Picture ............................................... 13

Changing the Colour Tone ..................................................... 14

Adjusting the Color Tone with the Preferred

Color Component ...................................................................... 14

Resetting the Picture Settings to the

Factory Defaults .......................................................................... 15

Changing the Picture Size....................................................... 15

Changing the Auto Wide (4:3) ............................................... 15

Digital Noise Reduction ........................................................... 16

DNIe Demo (Digital Natural Image engine) ..................... 16

Changing the Colour Space ................................................... 16

Freezing the Current Picture .................................................. 16

Viewing the Picture In Picture (PIP) ..................................... 17

SETTING THE SOUND

Changing the Sound Standard ........................................ 18

Adjusting the Sound Settings .......................................... 18

Setting the TruSurround XT (SRS TSXT) ........................ 18

Adjusting the Volume Automatically ............................ 19

Selecting the Internal Mute .............................................. 19

Listening to the Sound of the Sub Picture .................. 19

Resetting the Sound Settings to the

Factory Defaults .................................................................... 20

Connecting Headphones ................................................... 20

Selecting the Sound Mode ............................................... 20

SETTING THE TIME

Setting and Displaying the Current Time .................... 20

Setting the Sleep Timer ...................................................... 21

Switching the Television

On and Off Automatically .................................................. 21

SETTING THE OTHERS

Choosing Your Language ................................................... 22

Using Game Mode ................................................................ 22

Setting the Blue Screen Mode /

Selecting the Melody ......................................................... 23

Using the Energy Saving Feature .................................... 23

Setting the Blue Eye ............................................................. 23

Selecting the Source ............................................................ 24

Editing the Input Source Names ..................................... 24

BN68-01007U-01Eng.indd 1BN68-01007U-01Eng.indd 1 2006-09-07  11:02:272006-09-07  11:02:27

English-2

Symbol Press Important Note One-Touch

Button

WISELINK

Using the WISELINK Function ........................................... 25

Using the WISELINK Menu ................................................. 26

Using the PHOTO (JPEG) List ............................................ 26

Viewing Photo File Information ....................................... 28

Selecting a Photo and Slide Show.................................. 28

Rotating .................................................................................... 29

Zooming-in ............................................................................. 30

Copying Image Files ............................................................ 31

Deleting Image Files ............................................................ 31

Printing a Photo .................................................................... 32

Using the MP3 List ................................................................ 32

Copying Music Files ............................................................. 33

Deleting Music Files ............................................................. 33

Using the Setup Menu ........................................................ 34

USING THE DTV FEATURE

Previewing the DTV Menu System ................................. 35

Updating the Channel List Automatically ................... 35

Updating the Channel List Manually ............................. 36

Editing Your Favourite Channels ..................................... 36

Selecting Channel Manager ............................................. 37

Displaying Programme Information .............................. 38

Viewing the EPG (Electronic Programme Guide)

Information ............................................................................. 38

Using the Scheduled List ................................................... 39

Setting the Default Guide .................................................. 39

Viewing All Channels and Favourite Channels .......... 40

Choosing Your Language ................................................... 40

Adjusting the Translucency Level ................................... 41

Setting up the Parental Lock ............................................ 41

Setting the Subtitle .............................................................. 42

Selecting the Preferred Language

(Subtitle or Audio) ................................................................ 42

Viewing Product Information ........................................... 42

Checking the Signal Information .................................... 43

Upgrading the Software (Option)................................... 43

Viewing Common Interface .............................................. 44

Selecting the CI (Common Interface) Menu ............... 44

Resetting .................................................................................. 44

USING THE TELETEXT FEATURE

Teletext Decoder ................................................................... 45

Displaying the Teletext Information .............................. 45

Selecting a Specific Teletext Page .................................. 46

Using Fastext to Select a Teletext Page ........................ 46

Setting Up Your Remote Control ..................................... 47

Remote Control Codes ........................................................ 49

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ...................................................... 52

Display Modes ........................................................................ 52

Setting the PC ........................................................................ 53

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock .......................... 54

Troubleshooting:

Before Contacting Service Personnel ............................ 54

Technical and Environmental Specifications ............. 55

BN68-01007U-01Eng.indd 2BN68-01007U-01Eng.indd 2 2006-09-07  11:02:372006-09-07  11:02:37

English-3

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control &

Batteries (AAA x 2)

Power Cord Cover-Bottom Stand Screw X 4 Stand Cleaning Cloth

 Owner’s Instructions  Warranty card  Safety Guide

 Registration Cards

Wall mount items (sold separately) allow you to mount the TV on the

wall.

For detailed information on installing the wall mount, see the

instructions provided with the Wall Mount items. Contact a

technician for assistance when installing the wall mounted bracket.

Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others

if you elect to install the TV on your own.

Remove the stand and cover the bottom hole with a cap and fasten with

two screws.

Installing the Wall Mount Kit

< 2 >< 3 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3. Insert screw into the hole indicated and tighten.

The stand is installed for models with the screen size of 40 inch and above.

Installing the Stand

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

The stand and stand screw may not be included depending on the model.

M4 X L16

BN68-01007U-01Eng.indd 3BN68-01007U-01Eng.indd 3 2006-09-07  11:02:422006-09-07  11:02:42

English-4

Viewing the Control Panel

SOURCE

Toggles between all the available input sources

(T V, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2,

DTV). In the on-screen menu, use this button as you use the

ENTER

button on the remote control.

MENU

Press to see an on-screen menu of your TV’s features.

Press to decrease or increase the volume.

In the on-screen menu, use the buttons

as you use the  and  buttons on the remote control.

Press to change channels.

In the on-screen menu, use the

buttons

as you use the  and  buttons on the remote

control.

(Without the Remote Control, you can turn

on the TV by using the Channel buttons.)

Speakers

(

Power)

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and lights

up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

The product colour and shape may vary depending on the model.

BN68-01007U-01Eng.indd 4BN68-01007U-01Eng.indd 4 2006-09-07  11:02:582006-09-07  11:02:58

English-5

Viewing the Connection Panel

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

[Side Panel Jacks][Rear Panel Jacks]

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting HDMI/DVI

-

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection.

What is HDMI?

- “High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple

channels of digital audio ( 5.1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP

(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal on DVI for

sound output.

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that

it has been set to a compatible video output mode as shown in the table below.

Failure to observe this may result in picture distortion, image breakup or no picture.

Supported modes for DVI or HDMI

- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.

(This will result in a blank screen being displayed)

50 Hz

60 Hz

Component

480i

X

O

480p

O

576i

X

O

576p

O

X

O

720p

O

1080i

O

BN68-01007U-01Eng.indd 5BN68-01007U-01Eng.indd 5 2006-09-07  11:03:172006-09-07  11:03:17

English-6

Connecting Set-Top Box, VCR or DVD

-

Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect

the VCR (or DVD) to your set.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors

on the A/V device.

- Headphone may be connected to the headphone output (

) on the rear of your set.

While the headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Service connection for qualified service engineer.

Connecting AUDIO

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in

connectors on the Amplifier or DVD Home Theater.

Connecting Computer

-

Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the

sound card on your computer.

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other

ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)

and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.

-

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio

out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 720p mode.

- This LCD TV displays its maximum picture resolution in 1080i mode.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

-

The place of the Kensington Lock may be different depending on its model.

DIGITAL AUDIO OUT (OPTICAL)

- Connect to a Digital Audio Component.

Connecting CI (Common Interface) CARD

- When not inserting "CI CARD" in some channels,

"Scrambled Signal" is displayed on the screen.

- The pairing information containing a telephone number,

CI CARD ID, Host ID, and other information will be

displayed

in about 2~3 minutes. If an error message is displayed,

please contact your service provider.

- When the channel information configuration has finished,

the message "Updating Completed" is displayed,

indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your

hands since dropping the CI CARD may cause damage to it.

Service Port

- Service connection for qualified service engineer.

Please insert

the card as

shown

CI CARD

TV Rear Panel

BN68-01007U-01Eng.indd 6BN68-01007U-01Eng.indd 6 2006-09-07  11:03:272006-09-07  11:03:27

English-7

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control

for a long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

Selects a target device to be

controlled by the Samsung remote control

(TV, DVD, STB, CABLE, VCR)

(Refer to page 48~52)

Television Standby button

Number buttons for direct

channel access

One/Two-digit channel selection

It displays "Channel Manager"

on the screen.

Selects the TV and DTV mode directly

VCR/DVD Functions

Rewind, Stop, Play/Pause,

Fast/Forward

Volume increase

Volume decrease

Temporary sound switch-off

Menu display and

change confirmation

Electronic Program Guide (EPG) display

Picture-In-Picture On / Off

Picture freeze

Picture effect selection

Sound effect selection

Adjusts 5 separate devices - TV, DVD, STB,

CABLE, or VCR.

When pressing this button, a number of

buttons on the remote control

(e.g. Selects a target device, volume, channel

and MUTE buttons) light up for a few seconds

and then turn off to save power. This function

is to conveniently use the remote control at

night or when dark.

Available source selection

Previous channel

DTV menu display

This function enables you to load saved

photo (JPEG) and audio files (MP3)

and to view or play them on the TV.

P

: Next channel

P

: Previous channel

Exit the OSD

Control the cursor in the menu

Use to see information on the

current broadcast

Picture size selection

Digital subtitle display

Sound mode selection

SRS TSXT selection

When your remote does not work, change

the batteries and press the “RESET” button for

2-3 seconds before use.

Teletext Functions

Exit from the Teletext display

Teletext index

Teletext hold

Teletext size selection

Teletext mode selection (LIST/FLOF)

Teletext sub page

P

: Teletext next page

P

: Teletext previous page

Teletext cancel

Teletext reveal

Alternately select Teletext, Double, or Mix.

Fastext topic selection

Teletext store

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille

points on the Power, Channel and Volume buttons.

Viewing the Remote Control

BN68-01007U-01Eng.indd 7BN68-01007U-01Eng.indd 7 2006-09-07  11:03:512006-09-07  11:03:51

English-8

Switching On and Off

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish

to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

button on the remote control.

The screen is turned off and a blue standby indicator appears on the front of your set.

2.

To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

Placing Your Television in Standby Mode

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

When the TV is initially powered on, several basic settings proceed automatically and

subsequently. The following settings are available.

1. Press the POWER button on the remote control.

The message “Start Plug & Play” is displayed with “OK” selected.

2. Select the appropriate language by pressing the  or  button.

Press the ENTER button to confirm your choice.

3. The message “Check antenna input.” is displayed with “OK” selected.

Press the ENTER button.

Please check that the antenna cable is connected correctly.

4. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

5. The “Auto Store” menu is displayed with the “Start” selected.

Press the ENTER button.

The channel search will start and end automatically.

After all the available channels are stored, the “Clock Set” menu appears.

Press the ENTER button at any time to interrupt the memorization process.

6. Press the ENTER button.

Select the “Hour” or “Minute” by pressing the

 or 

button.

Set the “Hour” or “Minute” by pressing the

 or 

button.

You can also set the hour and minute by pressing the number buttons on the remote control.

7. Press the ENTER button to confirm your setting.

The DTV channel scan menu appears and the DTV channel is automatically updated.

If the DTV channel is updated, the Source in the source list of the Input menu is

automatically changed to DTV.

For detailed descriptions about DTV channel update, refer to page 35 of this manual.

Plug & Play

 Language: Select your language.

 Country: Select your country.

 Auto Store:

Automatically scans for and stores channels available in the local area.

 Clock Set: Sets the current time for the TV clock.

BN68-01007U-01Eng.indd 8BN68-01007U-01Eng.indd 8 2006-09-07  11:04:462006-09-07  11:04:46

English-9

You can store up to 100 channels, including those received via cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the ENTER button.

2. Press the  or  button to select “Manual Store”, then press the ENTER button.

3. Press the ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number by pressing the  or  button and

then press the ENTER button.

You can also set a programme number by pressing number buttons on the remote control.

Storing Channels Manually

- Storing Channels Automatically

- Storing Channels Manually

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the  or 

button

to select “Setup”, then press the

ENTER

button.

2. Press the ENTER button again, to select “Plug & Play”.

3. The message “Start Plug & Play” is displayed.

You can scan for the frequency ranges available to you (and availability depends on your country).

Automatically allocated programme numbers may not correspond to actual or desired programme numbers.

However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the ENTER button.

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

4. Press the  or  button to select “Auto Store”, then press the ENTER button.

5. Press the ENTER button.

The TV will begin memorizing all of the available channels.

Press the

ENTER

button at any time to interrupt the memorization process and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu appears.

Storing Channels Automatically

BN68-01007U-01Eng.indd 9BN68-01007U-01Eng.indd 9 2006-09-07  11:04:562006-09-07  11:04:56

English-10

 Programme: Selects a program number for the channel.

 Colour System: Sets the colour supporting system.

 Sound System: Sets the sound supporting system.

 Channel: Selects a channel.

 Search: Scans for the frequency value for the channel.

 Store: Saves your settings.

Set the channels according to your preference.

You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu.

Press the  or 

button to select “Channel”, then press the ENTER button.

2. Press the  or  button to select “Channel Manager”, then press the ENTER button.

3. Press the ENTER button again, to select “Channel Manager”.

4. Press the  button to select “

” line.

5. Press the  or  button to select the undesired channel, then press the

ENTER button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

“ ”

is active when “Child Lock” is selected to “On”.

Setting the Channel Manager

You can select these options by

simply pressing the CH MGR

button on the remote control.

5. Press the  or  button to select “Colour System”, then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the ENTER button.

7. Press the  or  button to select “Sound System”, then press the ENTER button.

8. Select the sound standard required by pressing the  or  button, then press the ENTER button.

If there is an abnormal sound or no sound, re-select the sound system required.

9. If you know the number of the channel to be stored, press the  or  button to select “Channel”.

Press the ENTER button.

Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel.

Select the required number by pressing the  or  button and then press the ENTER button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)

You can also set a channel number by pressing number buttons on the remote control.

10. If you do not know the channel numbers, press the  or  button to select “Search”.

Press the ENTER button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select “Store”. Press the ENTER button to select “OK”.

12. Repeat steps 3 to 11 for each channel to be stored.

BN68-01007U-01Eng.indd 10BN68-01007U-01Eng.indd 10 2006-09-07  11:05:022006-09-07  11:05:02

English-11

You can exchange the numbers of two channels, in order to:

Modify the numeric order in which the channels have been

automatically stored.

Give easily remembered numbers to the channels that you watch most often.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the ENTER button.

2.

Press the  or  button to select “Sort”, then press the

ENTER

button.

3. Select channel number that you wish to change by pressing the  or  button

repeatedly. Press the ENTER button.

The selected channel number and name are moved to right side.

4.

Press the

 or 

button to move to the position in which you would like to change and then

press the

ENTER

button.

The selected channel is exchanged with the one previously stored to the chosen number.

5. Repeat steps 3 to 4 for another channel to be sorted.

6.

Press the EXIT button to exit.

Sorting the Stored Channels

This feature allows you to prevent unauthorized users, such as children, from watching

unsuitable programmes by muting out video and audio. Child Lock cannot be released using

the buttons on the side.

Only the remote control can release the Child Lock setting, so keep the remote control away

from children.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the ENTER button.

2. Press the  or  button to select “Channel Manager”, then press the ENTER button.

3. Press the  or  button to select “Child Lock”, then press the ENTER button.

4.

Press the  or  button to select “On”.

Press the

ENTER

button.

5. Press the  or  button to select “Channel Manager”,then press the ENTER button.

6. Press the  button to select “

” line.

7. Press the  or  button to select the channels you want to lock, then

press the ENTER button.

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

Select “On” or “Off” in “Child Lock” to easily turn the channels which

selected on

“

”

to be active or inactive.

Activating the Child Lock

BN68-01007U-01Eng.indd 11BN68-01007U-01Eng.indd 11 2006-09-07  11:05:082006-09-07  11:05:08

English-12

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that you want to fine tune.

2. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the ENTER button.

3. Press the  or  button to select “Fine Tune”, then press the ENTER button.

4. Press the  or  button to adjust the fine tuning.

Press the ENTER button.

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “*” on the

right-hand side of the channel number in the channel banner. And the channel number turns red.

To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the

ENTER button.

Fine Tuning Channel Reception

Channel names will be assigned automatically when channel information is broadcast.

These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the ENTER button.

2.

Press the  or  button to select “Name”, then press the

ENTER

button.

3. If necessary, select the channel to be assigned to a new name by pressing the

 or 

button. Press the ENTER button.

The selection bar is displayed around the name box.

4.

The characters available are :

Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (

-

, space)

5.

Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.

Press the EXIT button to exit.

Assigning Channels Names

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

Then...

Press the

 or 

button

Press the



button

Press the



button

Press the ENTER button

BN68-01007U-01Eng.indd 12BN68-01007U-01Eng.indd 12 2006-09-07  11:05:152006-09-07  11:05:15

English-13

You can select the type of picture which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu.

Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the ENTER button again, to select “Mode”.

Press the ENTER button again.

3.

Press the

 or 

button to select the desired picture effect.

Press the

ENTER

button.

4. Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.

 Standard: Selects the picture for optimum display in a normal environment.

 Movie: Selects the picture for comfortable display in a dark room.

 Custom: Select to view your favorite display settings.

(Refer to “Adjusting the Custom Picture”)

You can also press the P.MODE

button on the remote control

to select one of the picture

settings.

The Picture mode must be adjusted separately for each input source.

You can return to the factory defaults picture settings by selecting the “Reset”.

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 15)

Changing the Picture Standard

 Contrast: Adjusts the lightness and darkness between objects and the background.

 Brightness: Adjusts the brightness of the whole screen.

 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

 Colour: Adjusts the colours, making them lighter or darker.

 Tint (NTSC only):

Adjusts the colour of objects, making them more red or green for a more natural look.

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the “Changing the Picture Standard”

instructions number 1 to 3.

2. Press the  or  button to select a particular item.

Press the ENTER button.

3. Press the  or  button to decrease or increase the value of a particular item.

Press the ENTER button.

4. Press the EXIT button to exit.

Adjusting the Custom Picture

The adjusted values are stored according to the selected Picture mode.

In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

BN68-01007U-01Eng.indd 13BN68-01007U-01Eng.indd 13 2006-09-07  11:05:212006-09-07  11:05:21

English-14

The adjusted values are stored according to the selected Picture mode.

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the “Changing the Picture Standard”

instructions number 1 to 3 on page 13.

2.

Press the  or  button to select “Colour Tone”, then press the ENTER button.

3. Press the  or  button to select the desired colour tone setting.

Press the ENTER button.

4. Press the EXIT button to exit.

Changing the Colour Tone

 Cool2: Makes the colour temperature

bluer than “Cool1” menu.

 Cool1: Makes whites bluish.

 Normal: Keeps whites white.

 Warm1: Makes whites reddish.

 Warm2: Makes the colour temperature

redder than “Warm1” menu.

You can adjust a picture’s color tone with your preferred color component.

1. To select the desired picture effect, follow the “Changing the Picture Standard”

instructions number 1 to 3 on page 13.

2.

Press the  or  button to select “Colour Manager”,

then press the ENTER button.

3. Press the  or  button to select a particular item.

Press the ENTER button.

4. Press the  or  button to decrease or increase the value of a

particular item. Press the ENTER button.

5. Press the EXIT button to exit.

Adjusting the Color Tone with the Preferred Color Component

 R Contrast:

Lightens or intensifies the red component of the border between

objects and the background.

 G Contrast:

Lightens or intensifies the green component of the border between

objects and the background.

 B Contrast:

Lightens or intensifies the blue component of the border between

objects and the background.

 R Brightness:

Adjusts the brightness of the red component for the entire screen.

 G Brightness:

Adjusts the brightness of the green component for the entire screen.

 B Brightness:

Adjusts the brightness of the blue component for the entire screen.

 Reset:

Resets all settings to the defaults.

You cannot select a "Colour Tone" in the "Colour Manager".

BN68-01007U-01Eng.indd 14BN68-01007U-01Eng.indd 14 2006-09-07  11:05:272006-09-07  11:05:27

English-15

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

 WIDE 4:3 : Magnify the size of the picture more than 4:3.

 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

 4:3: This is the default setting for a video movie or normal broadcasting.

You can select these options

by simply pressing the P.SIZE

button on the remote control.

You can select the picture size which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu.

Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Size”, then press the ENTER button.

3. Select the required option by pressing the  or  button.

Press the ENTER button.

4. Press the EXIT button to exit.

Changing the Picture Size

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the “Changing the Picture Standard”

instructions number 1 to 3 on page 13.

2. Press the  or  button to select “Reset”, then press the ENTER button.

3. Press the EXIT button to exit.

The “Reset” will be set for each picture mode.

Resetting the Picture Settings to the Factory Defaults

“Auto Wide” function is available only in "TV", "Ext.1", "Ext.2", "AV", "S-Video" and "DTV" mode.

In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Zoom : Select by pressing the  or  buttons. Use the  or  button to move the

picture up and down. After selecting , use the  or  button to magnify or

reduce the picture size in the vertical direction.

WIDE 4:3: Move the screen up/down using the  or  button after selecting the

by pressing the  or ENTER button.

Ajusts the display picture size to 4:3 appropriate for input signal

1. Press the MENU button to display the menu.

Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Auto Wide (4:3)”, then press the ENTER button.

3. Select the required option by pressing the  or  button.

Press the ENTER button.

4. Press the EXIT button to exit.

Changing the Auto Wide (4:3)

These functions don’t work in "Component", "HDMI1", "HDMI2" and "PC" mode.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

 WIDE 4:3 : Magnify the size of the picture more than 4:3.

 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

 4:3: This is the default setting for a video movie or normal broadcasting.

BN68-01007U-01Eng.indd 15BN68-01007U-01Eng.indd 15 2006-09-07  11:05:322006-09-07  11:05:32

English-16

If the broadcast signal received by your TV is weak, you can activate the Digital Noise

Reduction feature to help reduce any static and ghosting that may appear on the screen.

1. Press the MENU button to display the menu.

Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Digital NR”, then press the ENTER button.

3.

Press the  or  button to select “On” or “Off”.

Press the

ENTER

button.

4. Press the EXIT button to exit.

Digital Noise Reduction

Samsung’s new technology brings you more detailed images with contrast and white

enhancement. A new image compensation algorithm gives viewers brighter and clearer

images. DNIe technology will match every signal to your eyes. You can see how DNIe

improves the picture by setting DNIe Demo mode to On.

1. Press the MENU button to display the menu.

Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the  or  button to select “DNIe Demo”, then press the ENTER button.

3.

Press the  or  button to select “On” or “Off”.

Press the

ENTER

button.

4. Press the EXIT button to exit.

These functions don’t work in PC mode.

The DNle Demo is designed to show the difference between the regular and DNIe pictures.

By default, the product displays the picture with DNle applied.

DNIe Demo (Digital Natural Image engine)

Press the STILL button to freeze a moving picture into a still one.

Press again to cancel.

Freezing the Current Picture

Colour space is a colour matrix composed of red, green, and blue colours.

Select your favorite colour space and experience the world of natural colour.

1. Press the MENU button to display the menu.

Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Colour Space”, then press the ENTER button.

3.

Press the  or  button to select “Wide” or “Auto”.

Press the

ENTER

button.

4. Press the EXIT button to exit.

Changing the Colour Space

 Wide : Wide Colour Space offers deep and rich colour tone.

 Auto : Auto Colour Space automatically adjusts to natural colour tone based on program

sources.

BN68-01007U-01Eng.indd 16BN68-01007U-01Eng.indd 16 2006-09-07  11:05:402006-09-07  11:05:40

English-17

You can display a sub picture within the main picture of set

programme or video input. In this way, you can watch the picture of set programme or video

input from any connected equipment while watching the main picture.

1. Press the MENU button to display the menu.

Press the  or  button to select “Picture”, then press the ENTER button.

2. Press the  or  button to select “PIP”, then press the ENTER button.

3. Press the ENTER button again.

Press the  or  button to select “On”, then press ENTER button.

If the PIP is activated, the size of the main picture turns to “16:9”.

4. Press the  or  button to select “Source”, then press ENTER button.

Select a source of the sub picture by pressing the  or  button and press the

ENTER button.

The sub picture can serve different source selections based on what the main picture is set to.

5. Press the  or  button to select “Swap”.

To interchange the main picture and the sub picture, select “Swap” option and press the

ENTER button.

The main picture and the sub picture are interchanged.

I

f main picture is in “PC” mode, “Swap” is not available.

6. Press the  or  button to select “Size” of the sub picture and then press the

ENTER button. Select a size of the sub picture by pressing the  or  button and

then press the ENTER button.

If main picture is in “PC” mode, “Size” is not available.

7. Press the  or  button to select “Position”, then press the ENTER button.

Select the position of the sub picture by pressing the  or  button and then press the

ENTER button.

8. Press the  or  button to select “Programme” and then press the ENTER button.

You can select the channel that you want to view through sub picture by pressing

the  or  button. Press the ENTER button.

The “Programme” can be active when the sub picture is set to TV.

9. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you

use the main screen to view a game or karaoke.

Viewing the Picture In Picture (PIP)

Press the PIP button on the remote

control repeatedly to activate or

deactivate the “PIP”.

 Source: Used to select a source of the sub

picture.

 Swap: Used to interchange the main

picture and the sub picture.

 Size: Used to select a size of the sub picture.

 Position: Used to move the sub picture.

 Programme: Used to Change the sub

picture.

PIP Settings

(O: PIP operates, X: PIP doesn’t operate)

TV

Ext.1

Ext.2

AV

S-Video

Component

PC

HDMI1

HDMI2

DTV

TV

X

O

X

Ext.1

X

O

X

Ext.2

X

O

X

AV

X

O

X

S-Video

X

O

X

Component

X

O

X

PC

X

HDMI1

O

X

HDMI2

O

X

DTV

X

Sub

Main

BN68-01007U-01Eng.indd 17BN68-01007U-01Eng.indd 17 2006-09-07  11:05:502006-09-07  11:05:50

English-18

You can select the type of the special sound effect to be used when watching a given

broadcast.

1. Press the MENU button to display the menu.

Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the ENTER button again, to select “Mode”.

3. Select the required sound effect by pressing the  or  button repeatedly and then

press the ENTER button.

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.

 Music: Emphasizes music over voices.

 Movie: Provides live and full sound for movies.

 Speech: Emphasizes voices over other sounds.

 Custom: Selects your custom sound settings.

(Refer to “Adjusting the Sound Settings”)

Changing the Sound Standard

You can also select these options by

simply pressing the S.MODE button

on the remote control.

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu.

Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Equalizer”, then press the ENTER button.

3. Press the  or  button to select a particular item.

Press the ENTER button.

4. Press the  or  button to reach the required setting.

Press the ENTER button.

5. Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically switched to “Custom”.

Adjusting the Sound Settings

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1

multichannel content over two speakers.

TruSurround delivers a compelling,virtual surround sound experience through any two-

speaker playback systems, including internal television speakers. It is fully compatible with

all multichannel formats.

1. Press the MENU button to display the menu.

Press the  or  button to select “Sound”, then press the ENTERbutton.

2. Press the  or  button to select “SRS TSXT”, then press the ENTER button.

3.

Press the  or  button to select “On” or “Off”. Press the

ENTER

button.

4. Press the EXIT button to exit.

Setting the TruSurround XT (SRS TSXT)

You can also set these options

simply by pressing the SRS

button on remote control.

TruSurround XT, SRS and

symbol are trademarks of

SRS Labs, Inc. TruSurround XT technology is incorporated under license

from SRS Labs, Inc.

BN68-01007U-01Eng.indd 18BN68-01007U-01Eng.indd 18 2006-09-07  11:06:042006-09-07  11:06:04

La page charge ...

Samsung LE32N7 Manuel utilisateur

Samsung LE32N7 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents