Sony Alpha ILCE-9 Manuel utilisateur

C:\d830100411\d830100411ILCE9CEC\00COV-ILCE9CEC\000COV.indd

2019/02/19 11:30

C:\d830100411\d830100411ILCE9CEC\00COV-ILCE9CEC\000COV.indd

2019/02/19 11:30

ILCE-9

d-830-100-41(1)

ILCE-9

d-830-100-41(1)

ILCE-9

d-830-100-41(1)

E-mount

Interchangeable Lens Digital Camera/Instruction Manual GB

Fotocamera digitale con obiettivo intercambiabile/Istruzioni per l’uso

IT

Digitalkamera med utbytbart objektiv/Handledning SE

Digitalkamera mit Wechselobjektiv/Gebrauchsanleitung DE

Цифровой фотоаппарат со сменным объективом/Инструкция по эксплуатации

RU

Digitale camera met verwisselbare lens/Gebruiksaanwijzing NL

Digitalkamera med utskiftbart objektiv/Bruksanvisning NO

Appareil photo à objectif interchangeable/Mode d’emploi FR

Câmara Digital de Objetivas intercambiáveis/Manual de instruções

PT

Digitaalinen kamera vaihdettavalla objektiivilla/Käyttöopas FI

Cámara Digital de Lentes Intercambiables/Manual de instrucciones

ES

Цифровий фотоапарат зі змінним об’єктивом/Посібник з експлуатації

UA

Aparat cyfrowy z wymiennymi obiektywami/Instrukcja obsługi PL

Digitalkamera med udskifteligt objektiv/Betjeningsvejledning DK

If your camera’s system software version is

earlier than Ver.5.0, refer to the Instruction

Manual at the following URL.

http://helpguide.sony.net/ilc/ilce9/d832100411.pdf

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\010BEF.indd

2019/02/19 11:32

GB

2

English

Check out the

Help Guide!

The “Help Guide” is an on-line manual that you can read on your

computer or smartphone. Refer to it for details on menu items,

advanced usage, and the latest information on the camera.

Scan

here

http://rd1.sony.net/help/ilc/1830/h_zz/

Instruction Manual

(this book)

In-Camera Guide

This manual introduces some

basic functions.

For the quick start guide, see

“Startup guide” (page23). The

“Startup guide” introduces the

initial procedures from when you

open the package until you release

the shutter for the first shot.

The [In-Camera Guide] shows

explanations of the menu

items on the monitor of the

camera.

You can quickly pull up information

during shooting.

Select an item for which you want

to view a description, and then

press the

(Delete) button.

ILCE-9 Help Guide

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\010BEF.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

3

GB

Notes on using your camera

Along with this section, also see

“Precautions” in the Help Guide.

Notes on handling the product

• This camera is designed to be dust

resistant and splash resistant, but

it is not guaranteed to completely

prevent the ingress of dust or water

droplets.

• Do not leave the lens or the

viewfinder exposed to a strong light

source such as sunlight. Because

of the lens’s condensing function,

doing so may cause smoke, fire, or

a malfunction inside the camera

body or the lens. If you have to

leave the camera exposed to a light

source such as sunlight, attach the

lens cap to the lens.

• When you shoot with backlighting,

keep the sun sufficiently far away

from the angle of view. Otherwise,

the sunlight may enter the focus

inside the camera and cause smoke

or fire. Even if the sun is slightly

away from the angle of view, it may

still cause smoke or fire.

• Do not directly expose the lens to

beams such as laser beams. That

may damage the image sensor and

cause the camera to malfunction.

• Do not look at sunlight or a strong

light source through the lens when

it is detached. This may result in

unrecoverable damage to the eyes.

• Do not leave the camera, the

supplied accessories, or memory

cards within the reach of infants.

They may be accidentally

swallowed. If this occurs, consult a

doctor immediately.

Notes on the monitor and

electronic viewfinder

• The monitor and electronic

viewfinder are manufactured

using extremely high-precision

technology, and over 99.99% of the

pixels are operational for effective

use. However, there may be some

small black dots and/or bright

dots (white, red, blue or green in

color) that constantly appear on the

monitor and electronic viewfinder.

These dots are normal due to the

manufacturing process and do not

affect the images in any way.

• When shooting with the viewfinder,

you may experience symptoms

such as eyestrain, fatigue,

travel sickness, or nausea. We

recommend that you take a break

at regular intervals when you are

shooting with the viewfinder.

• If the monitor or electronic

viewfinder is damaged, stop using

the camera immediately. The

damaged parts may harm your

hands, face, etc.

Notes on continuous shooting

During continuous shooting, the

monitor or viewfinder may flash

between the shooting screen and a

black screen. If you keep watching

the screen in this situation, you may

experience uncomfortable symptoms

such as feeling of unwellness. If you

experience uncomfortable symptoms,

stop using the camera, and consult

your doctor as necessary.

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\010BEF.indd

2019/02/19 11:32

GB

4

Notes on recording for long

periods of time or recording 4K

movies

• The camera body and battery may

become warm with use – this is

normal.

• If the same part of your skin

touches the camera for a long

period of time while using the

camera, even if the camera does

not feel hot to you, it may cause

symptoms of a low-temperature

burn such as redness or blistering.

Pay special attention in the following

situations and use a tripod, etc.

–When using the camera in a high-

temperature environment

–When someone with poor

circulation or impaired skin

sensation uses the camera

–When using the camera with the

[Auto Power OFF Temp.] set to

[High].

Notes on shooting with an external

flash

When shooting with an external flash,

light and dark stripes may appear on

the image if the shutter speed is set

to faster than 1/4000seconds.

Sony lenses/accessories

Using this unit with products from

other manufacturers may affect its

performance, leading to accidents or

malfunction.

On the data specifications

described in this manual

The data on performance and

specifications are defined under

the following conditions, except

as described in this manual: at an

ordinary ambient temperature of

25ºC (77°F), and using a battery pack

that has been fully charged until the

charge lamp has turned off.

Warning on copyright

Television programs, films,

videotapes, and other materials

may be copyrighted. Unauthorized

recording of such materials may

be contrary to the provisions of the

copyright laws.

Notes on location information

If you upload and share an image

tagged with a location, you may

accidentally reveal the information

to a third party. To prevent third

parties from obtaining your location

information, set

[

Location Info. Link Set.] to [Off]

before shooting images.

Notes on discarding or transferring

this product to others

When discarding or transferring

this product to others, make sure to

perform the following operation to

protect private information.

• Select [Setting Reset]  [Initialize].

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\010BEF.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

5

GB

Notes on discarding or transferring

a memory card to others

Executing [Format] or [Delete] on

the camera or a computer may not

completely delete the data on the

memory card. When transferring

a memory card to others, we

recommend that you delete the

data completely using data deletion

software. When discarding a memory

card, we recommend that you

physically destroy it.

Note on network functions

When you use network functions,

unintended third parties on

the network may access the

camera, depending on the usage

environment.

For example, unauthorized access

to the camera may occur in network

environments to which another

network device is connected or can

connect without permission. Sony

bears no responsibility for any loss

or damage caused by connecting to

such network environments.

How to turn off wireless network

functions (Wi-Fi, etc.) temporarily

When you board an airplane,

etc., you can turn off all wireless

network functions temporarily using

[Airplane Mode].

CAUTION

For safety, do not connect the

connector for peripheral device wiring

that might have excessive voltage to

LAN terminal. Follow the instructions

for LAN terminal.

Power Cord

For the customers in the UK, Ireland,

Malta, Cyprus and Saudi Arabia

Use the power cord (A). For safety

reasons, the power cord (B) is not

intended for above countries/regions

and shall therefore not be used there.

For the customers in other EU

countries/regions

Use the power cord (B).

(A) (B)

LAN cable

Use a Category 5e or higher Shielded

Twisted Pair (STP) cable with high

shielding performance.

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\010BEF.indd

2019/02/19 11:32

GB

6

For Customers in the U.S.A.

For question regarding your product

or for the Sony Service Center nearest

you, call 1-800-222-SONY (7669).

Declaration of Conformity

Trade Name: SONY

Model No.: WW361847

Responsible Party: Sony Electronics

Inc.

Address: 16535 Via Esprillo, San

Diego, CA 92127 U.S.A.

Telephone Number: 858-942-2230

This device complies with part 15 of

the FCC rules. Operation is subject

to the following two conditions:

(1)This device may not cause harmful

interference, and (2)this device must

accept any interference received,

including interference that may cause

undesired operation.

The supplied interface cable must be

used with the equipment in order to

comply with the limits for a digital

device pursuant to Subpart B of Part

15 of FCC Rules.

For details on the Wi-Fi functions and NFC One-touch functions, refer to the

“Help Guide” (page 2).

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

7

GB

Preparations for shooting

Checking the camera and the supplied

items

The number in parentheses

indicates the number of pieces.

• Camera (1)

• AC Adaptor (1)

The type of the AC Adaptor

may differ depending on the

country/region.

• Battery Charger (1)

• Power cord (mains lead) (1)*

* Multiple power cords may be

supplied with this equipment.

Use the appropriate one that

matches your country/region.

See page 5.

• Rechargeable Battery Pack

NP-FZ100 (1)

• Micro USB cable (1)

• Shoulder Strap (1)

• Body Cap (1) (Attached to the

camera)

• Cable Protector (1)

• Shoe Cap (1) (Attached to the

camera)

• Eyepiece Cup (1) (Attached to

the camera)

• Instruction Manual (1) (this

manual)

• Reference Guide (1)

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

GB

8

Identifying parts

See the pages in parentheses for details.

Front side



ON/OFF (Power) switch

(30)/Shutter button (31)



Image sensor position

mark

• The image sensor is the

sensor that converts light

into an electric signal. The

mark shows the location

of the image sensor. When

you measure the exact

distance between the camera

and the subject, refer to the

position of the horizontal line.

• If the subject is closer than

the minimum shooting

distance of the lens, the focus

cannot be confirmed. Make

sure you put enough distance

between the subject and the

camera.

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

9

GB



Front dial

You can quickly adjust the

settings for each shooting

mode.



Infrared remote sensor



Lens release button (29)



Wi-Fi/Bluetooth antenna

(built-in)



Microphone*



AF illuminator (68)/Self-

timer lamp

When the lens is removed



Mounting index (28)



Image sensor**



Mount



Lens contacts**

* Do not cover this part during

movie recording. Doing so may

cause noise or lower the volume.

** Do not directly touch these parts.

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

GB

10

Rear side



Eyepiece cup

To remove the eyepiece cup

Push the grips at the bottom

of the eyepiece cup to the left

and right and lift up the cup.

Remove the eyepiece cup

when attaching an angle

viewfinder (sold separately).

Also, select MENU 

(Camera Settings 2) 

[FINDER/MONITOR], and then

switch [Viewfinder (Manual)]

and [Monitor (Manual)].



Viewfinder



C3 button (Custom button 3)

(17)



MENU button (65)



Monitor/Touch panel (47)

You can adjust the monitor to

an easily viewable angle and

shoot from any position.



Eye sensor

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

11

GB



Diopter-adjustment dial

Adjust the diopter-adjustment

dial according to your eyesight

until the display appears clearly

in the viewfinder. If it is hard to

operate the diopter-adjustment

dial, remove the eyepiece cup

before operating the dial.



MOVIE (Movie) button (32)



For shooting: AF-ON (AF On)

button

For viewing:

(Enlarge)

button



Rear dial

You can quickly adjust the

settings for each shooting

mode.



For shooting: AEL button

For viewing:

(Image Index)

button



Multi-selector (16)



Media slot cover switch



For shooting: Fn (Function)

button (18)

For viewing:

(Send to Smartphone)

button

You can display the screen

for [Send to Smartphone] by

pressing this button.



Control wheel (16)



Access lamp



For shooting: C4 button

(Custom button 4) (17)

For viewing:

(Delete) button

(32)



(Playback) button (32)

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

GB

12

Top side/Side view



Drive mode dial lock release

button



Upper: Drive mode dial

Lower: Focus mode dial (33)



Focus mode dial lock release

button



LAN terminal



(Flash sync) terminal



Speaker



(Microphone) jack

When an external microphone

is connected, the built-

in microphone turns off

automatically. When the

external microphone is a

plugin-power type, the power

of the microphone is supplied

by the camera.



(Headphones) jack



HDMI micro jack



Charge lamp



Multi/Micro USB Terminal*

(62)

This terminal supports Micro

USB-compatible devices.

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

13

GB



Multi Interface Shoe*

Some accessories may not go

in all the way and protrude

backward from the Multi

interface shoe. However,

when the accessory reaches

the front end of the shoe, the

connection is completed.



Mode dial lock release button



Mode dial (32)



C2 button (Custom button 2)

(17)



C1 button (Custom button 1)

(17)



Exposure compensation dial



Hooks for shoulder strap

Attach both ends of the strap

onto the camera.



(N mark) (59)

• This mark indicates the touch

point for connecting the

camera and an NFC-enabled

Smartphone.

• NFC (Near Field

Communication) is an

international standard

of short-range wireless

communication technology.



SLOT 1 (Memory card slot 1)

(25)

Supports SD cards only

(compatible with UHS-I and

UHS-II)



SLOT 2 (Memory card slot 2)

(27)

Supports SD cards

(compatible with UHS-I) and

Memory Stick PRO Duo media

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

GB

14

* For details on compatible

accessories for the multi interface

shoe and the Multi/Micro USB

Terminal, visit the Sony website, or

consult your Sony dealer or local

authorized Sony service facility.

Accessories for the Accessory Shoe

can also be used. Operations with

other manufactures’ accessories

are not guaranteed.

To attach the cable protector

Use the cable protector to prevent

the HDMI cable from being

disconnected when shooting

images with the HDMI cable

connected. Open both of the jack

covers and insert an HDMI cable

into the camera. Swing the HDMI

micro jack cover downward and

attach the cable protector as

illustrated so that the end of the

cable protector fits in the slit under

the Multi/Micro USB Terminal.

Secure the cable protector with the

attachment screw. Then secure the

HDMI cable with the fixing dial.

Fit the end in the slit Fixing dial

Attachment screw

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

15

GB

Bottom



Battery insertion slot (24)



Battery cover (24)



Tripod socket hole

Use a tripod with a screw less

than 5.5mm (7/32inches)

long. Otherwise, you cannot

firmly secure the camera, and

damage to the camera may

occur.



Battery cover release lever

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

GB

16

Basic operations

Using the control wheel

• You can select setting items by turning or pressing the top/bottom/left/

right side of the control wheel. Your selection is determined when you

press the center of the control wheel.

• The DISP (Display Setting) and ISO (ISO) functions are assigned to the

top/right side of the control wheel. In addition, you can assign selected

functions to the left/right/bottom side and the center of the control

wheel, and to the rotation of the control wheel.

• During playback, you can display the next/previous image by pressing

the right/left side of the control wheel or by turning the control wheel.

Using the multi-selector

• Put your finger right on top of the multi-selector to manipulate it more

precisely.

• When [Focus Area] is set to [Zone], [Flexible Spot], or

[Expand Flexible Spot], you can move the focus area by pressing the

multi-selector up/down/left/right.

• The [Focus Standard] function is assigned to the center of the multi-

selector in the default settings.

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

17

GB

Assigning frequently used functions to buttons

(Custom Key)

You can use the custom key function to assign the functions you use

most frequently to easily operable keys. This lets you skip the process of

selecting items from MENU, so you can recall the functions more quickly.

You can also assign [Not set] to easily operable keys to prevent accidental

operation.

You can separately assign functions to custom keys for the still image

shooting mode (

Custom Key), movie shooting mode ( Custom Key),

and playback mode (

Custom Key).

• Assignable functions vary depending on the keys.

You can assign functions to the following keys.



AF-ON Button



Custom Button 3



Custom Button 2



Custom Button 1



AEL Button



Center Button



Control Wheel / Left Button /

Right Button / Down Button



Custom Button 4



Multi-Slc Center Btn



Fn/ Button

Hint

• You can recall functions more quickly by using the Function menu

(page18) to configure each setting directly from the Fn button, along with

the custom keys.

The following is the procedure for assigning the [Eye AF] function to the

AEL button.

1

MENU  (Camera Settings 2)  [ Custom Key].

• If you want to assign a function to recall while shooting movies,

select [

Custom Key]. If you want to assign a function to recall while

playing back images, select [

Custom Key].

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

GB

18

2

Move to the [Rear1] screen using the left/right side of the

control wheel. Then, select [AEL Button] and press the center of

the control wheel.

3

Press the left/right side of the control wheel until [Eye AF] is

displayed. Select [Eye AF], and then press the center.

• If you press the AEL button in the still image shooting mode and eyes

are detected, [Eye AF] will activate, and the camera will focus on the

eyes. Shoot images while holding down the AEL button.

Note

• You can also assign shooting functions to the focus hold button on the lens.

However, some lenses do not have a focus hold button.

• If you assign [Follow Custom (

)] to a custom key using [ Custom Key],

but the function is one that is unavailable in the movie shooting mode such

as [

JPEG Quality] or [Flash Mode], the function will not be recalled when

you press the key in the movie shooting mode.

• If you assign [Follow Custom (

/ )] to a custom key using

[

Custom Key], the camera will switch to the shooting mode and recall the

assigned function when you press the key in the playback mode.

Using the Fn (Function) button (Function menu)

The Function menu is a menu of 12 functions

that is displayed at the bottom of the screen

when you press the Fn (Function) button in

the shooting mode. You can access frequently

used functions more quickly by registering

them to the function menu.

Hint

• You can recall functions more quickly by using the custom key function

(page17) to assign frequently used functions to desired keys, along with

the function menu.

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

ILCE-9

d-830-100-41(1)

GB

19

GB

1

Press the DISP on the control

wheel repeatedly to display

a screen mode other than

[For viewfinder], and then

press the Fn (Function) button.

Fn button

2

Select the desired function by

pressing the top/bottom/left/

right side of the control wheel.

3

Select the desired setting by turning the front dial, and press

the center of the control wheel.

• Some functions can be fine-tuned using the rear dial.

To adjust settings from the dedicated setting screens

Select the desired function in step 2, then

press the center of the control wheel. The

dedicated setting screen for the function

will appear. Follow the operating guide

to adjust settings.

Operation guide

ILCE-9

d-830-100-41(1)

C:\d830100411\d830100411ILCE9CEC\01GB-ILCE9CEC\020PRE.indd

2019/02/19 11:32

GB

20

To change the functions in the function menu

(Function Menu Set.)

The following is the procedure for changing [Drive Mode] in the function

menu to [Grid Line].

 MENU  (Camera Settings 2)  [Function Menu Set.].

 Select

(Drive Mode) from among the twelve functions

in the function menu using the top/bottom/left/right side

of the control wheel, and then press the center.

 Press the left/right side of the control wheel until

[Grid Line] is displayed. Select [Grid Line], and then press

the center.

• (Grid Line) will be displayed in the former location of

(Drive Mode) in the function menu.

How to use the Quick Navi screen

The Quick Navi screen is a function optimized for shooting with the

viewfinder, that lets you control settings directly.

1

Select MENU  (Camera Settings 2)  [DISP Button] 

[Monitor].

2

Place a mark on [For viewfinder] and then select [Enter].

3

Press the DISP on the control wheel to set the screen mode to

[For viewfinder].

La page charge ...

Sony Alpha ILCE-9 Manuel utilisateur

Ce manuel convient également à

Sony Alpha ILCE-9 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents