01 02 03 04 05 06 07 08
Anker 336 Charger
(67W)
3
SERIES
USER MANUAL
Attention
Read all the instructions before using the product.
• The product is designed for use with IT equipment only.
• Naked flame sources, such as candles, must not be placed on
the product.
• The disconnection from line voltage is made by AC plug.
• In case of broken plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.
• The power supply is not intended to be repaired by service
personnel in case of failure or component defect (the product
can be disposed of).
• Le produit est conçu pour être utilisé avec du matériel
informatique uniquement.
• Le produit ne doit pas être exposé à des sources de flamme
nue, notamment des bougies.
• Débrancher la prise secteur.
• En cas de bouchons cassés, le produit doit être mis au rebut.
• Pour nettoyer le produit, utiliser uniquement une brosse ou un
chiffon sec.
• La prise de courant doit se situer à proximité de l'équipement et
être facilement accessible.
• L'alimentation n'est pas destinée à être réparée par l'équipe
technique en cas de panne ou de défaut de composant (le
produit peut être mis au rebut).
• 本製品はデジタル機器との接続向けに設計されています。
• 本製品を火気 ( ろうそくなど ) の近くで使用・保管しな
いでください。
• 電源をオフにする場合は、本製品をコンセントから抜いて
ください。
• コードや電源プラグが破損している場合は、本製品の使用
を中止し、カスタマーサポートへご連絡ください。
• お手入れは、乾いた布、もしくはブラシで行ってください。
• 本製品は手の届きやすい位置に設置してください。
• 本製品が破損したり部品が損傷した場合には、カスタマー
サポートへご連絡ください。
•
•
•
•
•
•
•
•
•
•.)AC
•
•
•
•
Using Your Product
DE: Verwendung Ihres Produkts
ES: Uso de su producto
FR: Utilisation de votre produit
IT: Utilizzo del prodotto
PT: Como usar seu produto
RU: Использование устройства
TR: Ürününüzü Kullanma
2
USB-C2
USB-C1
USB- A
C1
C2
1
JP: 本製品の使用方法
KO:
简中:产品的使用方法
繁中:使用產品
AR
HE
EN: For the fastest and safest charge, use an
Anker® cable, your device’s original cable or
another certified cable (such as MFi).
DE: Am schnellsten und sichersten ist der
Ladevorgang, wenn Sie ein Anker®-Kabel, das
Originalkabel des Geräts oder ein anderes
zertifiziertes Kabel (z.B. MFi) verwenden.
ES:
Para cargar de la forma más rápida y segura,
utilice un cable Anker®, el cable original del
dispositivo o uno certificado (como MFi).
FR: Pour une charge sûre et rapide, utilisez un câble
Anker®, le câble d'origine de votre appareil, ou un
autre câble certifié (MFi, par exemple).
IT: Per ricariche più rapide e sicure, utilizzare un
cavo Anker®, il cavo originale del dispositivo
oppure un altro cavo certificato (ad esempio
MFi).
PT: Para um carregamento mais rápido e seguro,
use um cabo Anker®, que é o cabo original do
seu dispositivo, ou outro cabo certificado (como
um MFi).
RU:
TR:
En hızlı ve güvenli şarj işlemi için Anker®
markalı bir kablo, cihazınızın orijinal kablosu
veya diğer bir sertifikalı kablo (MFi gibi)
kullanın.
JP: お使いの機器をすばやく安全に充電するため
に、必ず次のいずれかのケーブルをご使用く
ださい:Anker のケーブル、お使いの機器の
純正ケーブル、および MFi などの認証を取得
したケーブル。
KO:
简中: Anker®
MFi
繁中:
Anker®
MFi
:AR
MFi
:HE
Anker
MFi
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician
for help.
The following importer is the responsible party (for FCC matters
only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-
003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product
type A2674 is in compliance with Directive 2014/35/EU &
2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU.
The full text of the EU declaration of conformity is available at
the following internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that the product
type A2674 is in compliance with Electrical Equipment (Safety)
Regulations 2016 & Electromagnetic Compatibility Regulations
2016 & The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations
2012 & The Ecodesign for Energy-Related Products Regulations
2010. The full text of the GB declaration of conformity is
available at the following internet address:
https://www.anker.com.
)FCC
15
21
FCC15