GE HEALTHCARE GP200304 Vscan Air Charger Manuel utilisateur

Marque
GE HEALTHCARE
Modèle
GP200304 Vscan Air Charger
Taper
Manuel utilisateur
Vscan Air Charger
User Manual
EN
Overview
The Vscan Air Charger is specifically designed to charge the Vscan Air probe
Signal Indicator
Indicator
Status
Solid BLUE for 3 seconds, then off.
Power on, not charging.
Solid BLUE.
Charging.
Flashing BLUE.
Foreign metals detected.
Cautions
1. Do not place any foreign materials, such as metal objects, magnets, and magnetic
stripe cards between the Vscan Air probe and the charger.
2. Use this charger in an ambient temperature between 0°C ~ 40°C.
3. Do not disassemble the charger.
4. Use original or certified cable and charger for safe charging.
5. Keep a distance of at least 20 cm (7.88 inches) between implanted medical devices
(pacemakers, cochlear implants, etc.) and this charger, to avoid potential interference with the medical devices.
Charging instruction
1. Place the probe on top of the charger pad as shown to start charging.
The charger pad's LED indicator lights solid blue during charging.
The probe indicator also lights up.
2. Once the charging is completed, the probe indicator turns off.
Product Information
Product name: Vscan Air Charger
Model: GP200304
Manufactured for: GE Healthcare India
Address: Odyssey Building 3rd Floor Wing A, EPIP 122 (Phase II), Whitefield Road
John F. Welch Technology Center, Hoodi Village, Bengaluru, State-Karnataka, India.
Pincode-560066
Manufacturer: BizLink (Kunshan) Co., Ltd.
Specifications
Input
5V ⎓ 2.1A
Output
5W
Size
147.3 x 78.3 x 21.4 mm / 5.8 x 3.1 x 0.8 inch
Weight
123 g / 4.3 oz
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your body.
For Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement
doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.
For EU/UK
Safety statement: The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 20cm.
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the
maximum RF transmit power of the product for sale in the EU:
Frequency range
Max. Transmit Power
112-205 kHz
-7.05 dBuA/m
  • Page 1 1
  • Page 2 2
  • Page 3 3

GE HEALTHCARE GP200304 Vscan Air Charger Manuel utilisateur

Marque
GE HEALTHCARE
Modèle
GP200304 Vscan Air Charger
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents