Levana Mila Guide de démarrage rapide

Mila
Levana
Marque
Levana
Modèle
Mila
Catégorie
Moniteurs vidéo bébé
Taper
Guide de démarrage rapide
Mila Video Baby Monitor
Quick Start Guide
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference. (2) This device must accept any interference received, including interference that
may cause undesired operation.
IC STATEMENT / DÉCLA RATION IC:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
license-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device
must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développe-
ment économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes
:(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
WARNING
Strangulation Hazard: Children can become entangled in cords.
Power cords should be kept at least 3ft away from the crib and
baby’s reach at all times. Failure to do so could be fatal. Baby
monitors/cameras with power cords should never be hung on
or near the crib.
Getting to Know Mila
Notication Bar
1. Signal Strength
2. Power Save Mode
3. Temperature Alerts (if activated)
4. Active Lullaby Playing
5. Monitor Audio Muted
6. Volume Level (at camera)
7. Temperature (at active camera)
8. Time
9. Battery Level
1 2 3 4 5 6 7 8 9
Getting to Know Mila
Buttons and Functions
Volume
Speaker
Wake Button
(Press & Hold for 3 sec. to Power ON/OFF)
Charging LED
Indicator
Navigation
Buttons
USB Charging
Port
Reset
Kickstand
Talk to Baby
™
Two-Way
Communication
(Press & Hold)
Menu & Conrm
Selection
Zoom/Back
(Press & Hold to switch the main
camera for PTZ and audio control)
Setting Up Your Mila Baby Monitor
Charge the Monitor for 7 hours and Plug in the Camera
Tabletop
7 hr
Wall Mount
Charged
Charging
IMPORTANT:
Ensure the camera’s temperature sensor is not
obstructed.
Power cords should be kept at least 3ft away
from the crib and baby’s reach at all times.
Setting Up Your Mila Baby Monitor
Adding/Pairing Additional Cameras
Press the Menu Button to
access the Device Menu.
Go to Settings. Then press the
Menu Button to select.
Go to Camera Pairing. Press the
Menu button to select.
Press and hold the Pair Button
on the bottom of the camera
until a beep is heard.
Pairing successful!Select a camera square with a
(+) icon to pair a new camera.
Using Your Mila Baby Monitor
Dierent Camera Views
Press the Menu Button, then press Camera View. Each mode will give you a dierent view:
Sequence Mode:
Cycles through each
camera view in full screen
Camera Select:
Select which camera
to view in full screen
Using Your Mila Baby Monitor
Using Lullabies
Press the Menu Button, then follow these steps:
NOTE: Camera Volume is set via this menu. This will also apply for the Talk To Baby™ function.
Menu Options
• Lullaby – Select the track you’d like to play on your camera.
• Voice Activation – Lullabies will turn on when the camera detects noises from your little one.
• Camera Volume – Sets the volume for all sound output from camera.
Using Your Mila Baby Monitor
Power Saving Modes
Press the Menu Button, then select Power Save. Each mode is unique and tailored to your needs.
*Approximate values, battery life depends on many factors like battery age, frequency of use/charging,
features you’ve activated, etc.
Sleep Mode turns on
your monitor only when your
baby makes a sound. After 20
sec. of silence, the screen will
turn o again.
In Audio Only, your
screen will turn o but you
will still hear your baby.
Always ON mode is
the default operation of
the monitor.
up to
30
*
hrs
up to
20
*
hrs
up to
8
*
hrs
Worry Less, Do More.
®
Our mission is to bring you the peace of mind you deserve during
your parenting journey. If your experience with your monitor is
anything short of amazing, we’re here to x that!
mylevana.com/videosmylevana.com/support mylevana.com/contact
/mylevana @mylevana /mylevana
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Levana Mila Guide de démarrage rapide

Mila
Levana
Marque
Levana
Modèle
Mila
Catégorie
Moniteurs vidéo bébé
Taper
Guide de démarrage rapide
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes