LeapFrog LeapBuilders Roads & Railways Vehicles Parent Guide

Marque: LeapFrog

Modèle: LeapBuilders Roads & Railways Vehicles

Catégorie: Jouets d'apprentissage

Taper: Parent Guide

91-003709-000

Parent’s Guide

This guide contains important information. Please keep it for future reference.

Roads & Railways Roads & Railways

Vehicles

INTRODUCTION

Thank you for purchasing the LeapBuilders

Roads & Railways

Vehicles™.

This interactive building set comes with five double-sided

learning blocks and nine building pieces, including an electronic

Smart Star™ cube. Insert the learning blocks into the interactive

Smart Star™ cube to learn about colors, shapes and objects.

Inspire open-ended creativity and stacking fun with all the

pieces.

On/Off/Volume

Control Switch

Music

Button

Smart Star™

Cube

Question

Button

INCLUDED IN THIS PACKAGE

• One Interactive Smart Star™ Cube

• Eight Non-Electronic Building Pieces

• Five Double-Sided Learning Blocks

• Three double-sided building cards

• One parent's guide

WARNING:

All packing materials such as tape, plastic sheets, packaging

locks, removable tags, cable ties, cord and packaging screws

are not part of this toy, and should be discarded for your child’s

safety.

NOTE:

Please keep this parent's guide as it contains important

information.

ATTENTION :

Pour la sécurité de votre enfant, débarrassez-vous de tous

les produits d’emballage tels que rubans adhésifs, feuilles de

plastique, attaches, étiquettes et vis d’emballage. Ils ne font

pas partie du jouet.

NOTE :

Il est conseillé de conserver ce guide des parents car il comporte

des informations importantes.

Front

Back

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.

2. Locate the battery cover on the

back of the unit. Use a screwdriver

to loosen the screw.

3. Install 2 new AAA batteries

following the diagram inside the

battery box. (The use of new

alkaline batteries is recommended

for maximum performance.)

4. Replace the battery cover and

tighten the screw to secure.

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.

• Use only batteries of the same or equivalent type as

recommended.

• Do not mix different types of batteries: alkaline, standard

(carbon-zinc) or rechargeable, or new and used batteries.

• Do not use damaged batteries.

• Insert batteries with the correct polarity.

• Do not short-circuit the battery terminals.

Unlock the packaging locks:

Rotate the packaging lock 90 degrees

counterclockwise.

Pull out the packaging lock and discard.

• Remove exhausted batteries from the toy.

• Remove batteries during long periods of non-use.

• Do not dispose of batteries in fire.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the toy before charging

(if removable).

• Rechargeable batteries are only to be charged under adult

supervision.

MISE EN GARDE

• Utiliser des piles alcalines neuves pour des performances

maximales.

• Seules des piles du type recommandé doivent être utilisées.

• Ne pas mélanger différents types de piles ou d’accumulateurs,

ne pas mélanger des piles ou des accumulateurs neufs avec

des usagés.

• Ne pas utiliser des piles ou des accumulateurs endommagés.

• Mettre en place les piles ou les accumulateurs en respectant

les polarités + et –.

• Ne pas mettre les bornes d’une pile ou d’un accumulateur

en court-circuit (en reliant directement le + et le –).

• Enlever les piles ou les accumulateurs usagés du jouet.

• Retirer les piles ou les accumulateurs en cas de non-utilisation

prolongée.

• Ne les jeter ni au feu ni dans la nature.

• Ne pas tenter de recharger des piles non rechargeables.

• Enlever les accumulateurs du jouet pour les recharger.

• Les accumulateurs ne doivent être chargés que sous la

surveillance d’un adulte.

PRODUCT FEATURES

1. On/Off/Volume Control Switch

To turn the unit On, slide the

On/Off/Volume Control Switch

to the Low Volume or High

Volume position. To turn the

unit Off, slide the On/Off/Volume

Control Switch to the Off

position.

2. Automatic Shut Off

To preserve battery life, the LeapBuilders

Roads & Railways

Vehicles™ set will automatically shut off after approximately

100 seconds without input. The unit can be turned on again

by pressing any button or by inserting a Learning Block into

the interactive Smart Star™ Cube.

NOTE: This product is in Try-Me mode in the packaging. After

opening the package, turn the product off and on again

to proceed with normal play. If the unit powers down

while playing, please install a new set of batteries.

ACTIVITIES

1. Music Button

Press the Music Button to hear

short tunes and sing-along songs

about shapes and colors. The lights

will flash with the sounds.

2. Question Button

Press the Question Button to hear

interactive questions and short

tunes. The lights will flash with the

sounds.

3. Smart Star Cube™

Insert the double-sided Learning

Blocks into the interactive Smart

Star™ Cube to learn about shapes,

colors and objects. The lights will

flash with the sounds.

4. Stacking Fun

Stack the blocks onto the electronic

Smart Star™ Cube to hear fun

sound effects, phrases and short

tunes.

5. Mix and Match

For added fun, the LeapBuilders

Roads & Railways

Vehicles™ set interacts with the Learning Blocks from other

LeapBuilders

sets. Simply put a Learning Block from another

LeapBuilders

set into the interactive Smart Star™ Cube to

see flashing lights and hear learning phrases and short tunes

(additional sets sold separately). Please note, blocks from

sets in different languages have unique audio responses and

cannot be used interchangeably.

SING-ALONG SONG LYRICS

Song 1

Zoom, zoom we’re moving fast,

With LeapBuilders!

Racing cars around the track.

We're learning with LeapBuilders now, yeah!

Song 2

Zoom, Zoom, Zoom, let’s learn about shapes.

The truck and the train are shaped like a square.

Zoom, Zoom, Zoom, around in a circle,

On our way there!

Song 3

Green trees, blue sky,

Red bird, fly high,

Yellow sun, shine bright.

Look at all the colors passing by,

As the train is chugging through the countryside!

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp

cloth.

2. Keep the unit out of direct sunlight and away from any

direct heat source.

3. Remove the batteries when the unit will not be in use for

an extended period of time.

4. Do not drop the unit on hard surfaces and do not expose

the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions,

please follow these steps:

1. Please turn the unit OFF.

2. Interrupt the power supply by removing the batteries.

3. Let the unit stand for a few minutes, then replace the

batteries.

4. Turn the unit ON. The unit will now be ready to use again.

5. If the unit still does not work, install a brand new set of

batteries.

IMPORTANT NOTE:

If the problem persists, please call our Consumer Services

Department at 1-800-701-5327 in the U.S. or email support@

leapfrog.com. Creating and developing LeapFrog

products is

accompanied by a responsibility that we take very seriously. We

make every effort to ensure the accuracy of the information,

which forms the value of our products. However, errors

sometimes can occur. It is important for you to know that

we stand behind our products and encourage you to contact

us with any problems and/or suggestions you might have. A

service representative will be happy to help you.

Environmental Phenomena

The unit may malfunction if subjected to radio-frequency

interference. It should revert to normal operation when the

interference stops. If not, it may become necessary to turn the

power OFF and back ON, or remove and reinstall the batteries.

In the unlikely event of an electrostatic discharge, the unit may

malfunction and lose memory, requiring the user to reset the

device by removing and reinstalling the batteries.

Impact de l’environnement

Une défaillance de fonctionnement de l’appareil peut

survenir s’il est sujet à des interférences avec les fréquences

radioélectriques. Le fonctionnement normal de l’appareil devrait

reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il

peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de

retirer et réinstaller les piles. Dans l’éventualité peu probable

d’une décharge électrostatique, un mauvais fonctionnement

et une perte de mémoire de l’appareil peuvent se produire.

L’utilisateur doit alors retirer et réinstaller les piles pour

réinitialiser l’appareil.

NOTE:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Caution: Changes or modifications not expressly approved

by the party responsible for compliance could void the user’s

authority to operate the equipment.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO

CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL

INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT

MAY CAUSE UNDESIRED OPERATION.

CAN ICES-3 (B)/NMB-3(B)

Read our complete warranty policy online at

leapfrog.com/warranty.

Supplier’s Declaration of Conformity

Trade Name: LeapFrog

Model: 6090

Product Name: LeapBuilders

Roads & Railways Vehicles™

Responsible Party: LeapFrog Enterprises, Inc.

Address: 6401 Hollis Street, Suite 100,

Emeryville, CA 94608

Website: leapfrog.com

91-003709-000

Visit our website for more

information about our products,

downloads, resources and more.

leapfrog.com

LeapFrog Enterprises, Inc.

A subsidiary of VTech Holdings Limited.

LeapFrog LeapBuilders Roads & Railways Vehicles Parent Guide

Marque: LeapFrog

Modèle: LeapBuilders Roads & Railways Vehicles

Catégorie: Jouets d'apprentissage

Taper: Parent Guide

Télécharger le PDF

rapport

dans d''autres langues

English: LeapFrog LeapBuilders Roads & Railways Vehicles

Documents connexes

Autres documents

Hasbro Magnetic Shapes Mode d'emploi