UGREEN CM668 Manuel utilisateur
- Catégorie
- Casques mobiles
- Taper
- Manuel utilisateur
Bluetooth 5.3 Transmitter
Audio Adapter
Model: CM668 I P/N: 15765A
User Manual
-
1
-
Package Contents
USER MANUAL
1 × User Manual
1×3.5mm Mic
1×Bluetooth 5.3 Transmitter
Audio Adapter
-
2
-
Connection
Transmitter
Microphone
Laptop Switch
Game Controller
Earphones
Headphones
Laptop
Desktop
Switch
PS4PS5
-
3
-
Specifications
Model CM668
Bluetooth Version 5.3
Frequency Band 2400MHz-2483.5MHz
Max. RF Output Power 4dBm (conducted)
Bluetooth Profile A2DP/AVRCP/HSP/HFP
Transmission Distance 10m/33ft (no blocking)
Power Supply Port USB-A
Compatible Devices
The data are measured by UGREEN lab but may vary based on specific circumstances.
PS4/PS5/Switch/PC (Windows/macOS)
Codecs SBC/aptX/aptX HD/aptX Adaptive
Frequency Response 20Hz-20kHz
Mic Sensitivity -38±3dB
-
4
-
PS4/PS5
① Plug the transmitter into the USB port on your PS4 (or PS5). It will automatically
turn on and enter pairing mode when powering on.
② Put your earphone (like AirPods) in pairing mode based on its manual.
1.Bluetooth Pairing & Settings
Connect Enter Pairing Mode (Airpods)2 1
-
5
-
③ Transmitter will auto-connect to your earphone. The white indicator on the
transmitter will slowly flash to indicate successful pairing.
④ Set the transmitter as the default audio device.
PS4: Settings > Devices > Audio Devices > Output Device > Select "USB Headset
(UGREEN-15765A)" > Uncheck "Switch Output Device Automatically".
PS5: Settings > Sound > Audio Output > Output Device > Select "USB Headset
(UGREEN-15765A)" > Turn off "Switch Output Device Automatically".
Set Output Device (PS4)
4 Pair Device (Airpods)3
Flashing
blue & red
Pairing
Flashing white
(once per 10s)
Connected
Input Device
Output Device
USB Headset (UGREEN-15765)
Adjust Microphone Level
Volume Control (Headphones)
Output to Headphones All Audio
Switch Output Device Automatically
Audio Devices
Switch Output Device Automatically
Output Device USB Headset (UGREEN-15765A)
-
6
-
Output Device USB Headset (UGREEN-15765A)
① Using the included 3.5mm microphone
Plug the 3.5mm microphone into the device, then follow the steps below to enable it.
PS4: Settings > Devices > Audio Devices > Input Device > Select "Headset Connected to
Controller".
PS5: Settings > Sound > Microphone > Input Device > Select "Controller Headset".
2. Mic Select & Settings
Select the audio input device to use
Input Device
Headset Connected to Controller
TV or AV Amplifier
Headset Connected to Controller
Using the included 3.5mm microphone
-
7
-
PS4: Settings > Devices > Audio Devices > Input Device > Select "USB Headset
(UGREEN-15765A)" .
PS5: Settings > Sound > Microphone > Input Device > Select "USB Headset
(UGREEN-15765A)" .
Using the Bluetooth earphones built-in mic
After connecting the Bluetooth earphones, please double-click the MFB button till the red
indicator lights on to select the microphone, then follow the steps below to enable the mic.
②
Select the audio input device to use
Input Device
USB Headset (UGREEN-15765)
TV or AV Amplifier
USB Headset (UGREEN-15765A)
Double Click
Lights On
Using the Bluetooth earphones built-in mic (PS4)
-
8
-
1. Bluetooth Pairing
Switch
① Plug the transmitter into Switch or the dock based on the mode you used. It will
automatically turn on and enter pairing mode when powering on.
② Put your earbuds (like AirPods) in pairing mode based on its manual.
③ Transmitter will auto-connect to your earbuds and its white indicator will slowly
flash to indicate successful pairing.
Connect Pairing & connect 2 31
Flashing
blue & red
Pairing Connected
Flashing white
(once per 10s)
-
9
-
2. Use the 3.5mm microphones
As Switch does not support Bluetooth mic, please plug the included 3.5mm
microphone into Switch if you need voice chat.
Note
· It may need USB-C to USB-A adapter (sold separately) to make the transmitter work
when using tabletop mode or handheld mode.
· Using the 3.5mm microphone is not recommended when enabling the TV mode, as
the distance between the dock and the user may be too far to pick up sound.
Using the included 3.5mm microphone
-
10
-
Connect Enter Pairing Mode (Airpods)2 1
1. Bluetooth Pairing & Settings
Computer (Windows/macOS)
① Plug the transmitter into the USB port on your computer. It will automatically turn
on and enter pairing mode when powering on.
② Put your earphone (like AirPods) in pairing mode based on its manual.
③ Transmitter will auto-connect to your earphone. The white indicator on the
transmitter will slowly flash to indicate successful pairing.
④ Set the transmitter as the default audio device.
-
11
-
Set Output Device (macOS)
4
Pair Device (Airpods)
3
UGREEN-15765A USB
Flashing
blue & red
Pairing Connected
Flashing white
(once per 10s)
Note
For less interference, please keep a distance between other USB devices when
connected the transmitter to the PC.
Windows 10: Press the " Windows" + "S" simultaneously, type "Sound" in the search
box and click "Enter", then select "Headset Microphone (UGREEN-15765A)"
as the output device.
macOS 13.2.1: System Settings > Sound, click "Output", and then select
"UGREEN-15765A" as the output device.
-
12
-
2. Mic Select & Settings
① Using the included 3.5mm microphone
Plug the 3.5mm microphone into the laptop, then follow the steps below to enable it.
Note
· "Microphone" may have different name on different system versions. Please refer to
the actual uses.
· Using the microphone on the desktop computer is not recommended, as the distance
between the towers and the user may be too far to pick up sound.
Windows 10 : Press the " Windows" + "S" simultaneously, type "Sound" in the
search box and click "Enter", then select "Microphone (Realtek(R) Audio)"
as the input device.
macOS 13.2.1: System Settings > Sound, click "Input", and then select "External
Microphone" as the input device.
Windows 10: Press the " Windows" + "S" simultaneously, type "Sound" in the search
box and click "Enter", then select "Headset Microphone (UGREEN-15765A)"
as the output device.
macOS 13.2.1: System Settings > Sound, click "Output", and then select
"UGREEN-15765A" as the output device.
Using the included 3.5mm microphone (Windows/macOS)
Headset Microphone (UGREEN-15765) Certain
External Microphone
External Microphone
Microphone
(Realtek(R) Audio)
windows
macOS
-
13
-
② Using the Bluetooth earphones built-in mic
After connecting the Bluetooth earphones, please double-click the MFB button till
the blue indicator slowly flashes to select the microphone, then follow the steps
below to enable the mic.
Windows 10: Press the " Windows" + "S" simultaneously, type "Sound" in the search
box and click "Enter", then select "Headset Microphone (UGREEN-15765A)"
as the input device.
macOS 13.2.1: System Settings > Sound, click "Input", and then select "UGREEN-15765A"
as the input device.
Double Click
Slowly Flashes
Using the Bluetooth earphones built-in mic (Windows/macOS)
Headset Microphone (UGREEN-15765) Certain
Headset Microphone
(UGREEN-15765A)
UGREEN-15765A
UGREEN-15765A USB
windows
macOS
-
14
-
Reset
Plug the transmitter into the device, press and hold the button for 10s until the
red/green/blue indicator flashes twice in a cycle, indicating the resetting is completed.
Press 10S
Flash Twice
-
15
-
Indicators
Function
Power on
Bluetooth Call & Chat
(Use the built-in
microphone in
Bluetooth earphones)
Indicator
Power on
Pairing
Pairing
successful
Reconnecting
On
aptX
aptX Adaptive
Off
Using
SBC
aptX HD
Blue indicator will be
on for 1s
Blue and red indicator
flashes alternately
White/blue indicator
flashes once per 10s
Blue indicator flashes
once per 5s
White indicator flashes
once per 10s
Solid yellow
Solid green
Solid purple
Blue indicator flashes
once per 10s
Solid red
Solid blue
Audio Codecs
Bluetooth
connection
-
16
-
The transmitter is mainly used to stream audio wirelessly from your PS4/PS5,
Switch, or non-Bluetooth computer to your Bluetooth earphones or speakers. It
does not support files or pictures transferring.
The voice chat function depends on the games. Please ensure to enable the voice
chat function in the respective application’s settings.
This transmitter can save a maximum of 5 paired devices. It will automatically
reconnect to the last used device in next-time use.
Please press and hold the MFB button for 3s to enter force pairing mode if you want
to pair a new device.
The transmitter will automatically enter reconnecting mode when pairing has not
been completed in 5mins, and the blue indicator will flash once per 5s.
·
·
·
·
·
For high-quality voice chatting, please use the included 3.5mm microphone.
Upon connection, the transmitter will default to select the best-supported
codec based on the connected device. You can also single-click the MFB
button to switch between "aptX Adaptive>aptX HD>aptX>SBC", which will
work if your device and earphones supports the codec as well.
·
·
Notes
-
17
-
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital
device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if
not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan be
used in portable exposure condition without restriction.
FCC Radiation Exposure Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
FCC Statement
-
18
-
A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official
store or authorized sellers. Please feel free to contact us if you run into any problems.
Warranty Information
This symbol on the product(s) and / or accompanying documents indicates that, under the
new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s)
used electrical and electronic equipment (WEEE) should not be mixed with general household
waste. For proper treatment, recovery and recycling, please take this product(s) to designated
collection points where it will be accepted free of charge.
Disposing of this product correctly will help save valuable resources and prevent any potential
negative effects on human health and the environment, which could otherwise arise from
inappropriate waste handling.
Please contact your local authority for further details of your nearest designated collection
point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with your
national legislation.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or
supplier for further information.
For disposal in countries outside of the European Union
This symbol is only valid in the European Union (EU). If you wish to discard this product please
contact your local authorities or dealer and ask for the correct method of disposal.
WEEE
-
19
-
Hereby, Ugreen Group Limited declares that the product is in compliance with Directive
2014/53/EU
& 2011/65/EU. Learn more about the EU Declaration of Conformity is available at
the following internet address: https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
EU REP: Ugreen Group GmbH
Add: Mannheimer Str. 13, 30880 Laatzen, Germany
EU Declaration of Conformity
Hereby, Ugreen Group Limited declares that the product is in compliance with Directive UK Radio
Equipment Regulations(SI 2017 No.1206)& The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). Learn
more about the GB Declaration of Conformity is available at the following internet address:
https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
UK REP:Acumen Intemational Business Consultancy Limited
Add:94 Ock Street, Abingdon, OX14 5DH, UK
GB Declaration of Conformity
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
UGREEN CM668 Manuel utilisateur
- Catégorie
- Casques mobiles
- Taper
- Manuel utilisateur
dans d''autres langues
- English: UGREEN CM668 User manual
