Yes DOP36C86DLS/DA Guide d'installation

Catégorie
Cuisinières
Taper
Guide d'installation
Installation Instructions
Contemporary Style Pro Range
DOP48C86D**/DOP36C86D**
DG68-01510A-00
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 1INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 1 2023-02-23 오전 9:57:352023-02-23 오전 9:57:35
English2
Contents
Before You Begin 3
Important Notes to the Owner 3
Customer-Assurance Information 3
Important Safety Instructions 4
Read all instructions before using this appliance 4
Symbols In This Manual 4
About Anti-Tip Device 4
California Proposition 65 Warning 4
Commonwealth of Massachusetts 4
Installation-Related Safety Instructions 5
Product Specications 10
What Is Included (DOP48C86D**) 10
What Is Included (DOP36C86D**) 11
Needed Tools and Parts 12
Installation Requirements 13
Pre-Installation Checklist 13
General Requirements 13
Location Requirements 16
Gas Requirements 18
Special Gas Requirements (gas models sold in Massachusetts) 18
Electrical Requirements 19
Installation Instructions 20
Preparing for Installation 20
About Oven Functions 26
Installing the Burner-Control Knobs 28
Rangetop Assembly 29
Verifying Proper Operation 32
Removing and Reinstalling the Range 32
Installation Checklist 33
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 2INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 2 2023-02-23 오전 9:57:352023-02-23 오전 9:57:35
English 3
Before You Begin
Important Notes to the Owner
Installer
Read this manual before installing the range.
Remove all packing material before connecting
the electric and gas supply.
Observe all governing codes and ordinances.
Leave this manual with the owner, and write the
unit's model/serial #s inside for easy reference.
Installation of this appliance requires basic
mechanical skills.
The owner shall see to the range's proper
installation. (The warranty does not cover
product failure due to improper installation.)
Owner
As with any heat-generating appliance, certain safety precautions must be followed.
Ensure your range is installed properly by a qualied installer or technician.
Ensure the wall coverings near the range can withstand the heat generated by it.
Cabinet storage space above the range surface should be at least 30 in. (76.2 cm).
Keep this manual handy for personal and professional reference.
Service Technician
The electrical diagram is attach backside of range.
Customer-Assurance Information
To resolve questions and installation issues, contact your Dacor dealer or the Dacor Customer Assurance Team.
Before calling, have the range's model/serial numbers available. (See the range's data label: Located on the
bottom left side of the control panel.)
Dacor Customer Assurance:
833-353-5483(USA)
Monday - Friday 8:00 AM - 8:00 PM EST
844-509-4659(Canada)
Monday - Friday 8:00 AM - 8:00 PM EST
Website: www.dacor.com
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 3INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 3 2023-02-23 오전 9:57:362023-02-23 오전 9:57:36
English4
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
To avoid property damage/personal injury/death, follow the directions in this manual.
Electrical and gas equipment with moving parts can be dangerous. The Important safety instructions in
this manual are intended to minimize the risk of property damage, personal injury, and death. Read these
instructions.
Keep this manual in a handy place for reference.
Symbols In This Manual
Follow these warning icons and symbols explicitly to prevent property damage and personal injury.
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in electric shock, personal injury, or property damage.
NOTE
Useful tips and instructions.
About Anti-Tip Device
WARNING
All ranges can tip and cause personal injury and death. Install and check the
anti- tip bracket.
After installing the anti-tip device (see Installing the Anti-Tip Device), verify proper installation by carefully
tipping the range forward. The anti-tip device should keep the range safely in place.
When the range is put back in place after maintenance, be sure to re-engage the anti-tip device.
To avoid personal/property damage, do not step/sit/lean on the range.
Re-engage anti-tip device if range is moved.
California Proposition 65 Warning
WARNING
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Commonwealth of Massachusetts
This product must be installed by a licensed plumber or gas tter qualied or licensed by the State of
Massachusetts. When using ball-type gas shut-off valves, you must use the T-handle type. Multiple exible gas
lines must not be connected in series.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 4INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 4 2023-02-23 오전 9:57:362023-02-23 오전 9:57:36
English 5
Installation-Related Safety Instructions
This section consists of general and specic safety instructions surrounding the range's installation.
WARNING
Read these instructions thoroughly to reduce risk of property damage, re, personal injury, and death, and to
ensure proper installation.
General Safety
Do not touch the range during or immediately after cooking.
Know where and how to shut off/on the range's gas-supply valve.
Use only dry pot holders.
Do not let children sit/stand on the range or play with any of its parts. Do not leave children unattended
near the range when it is in use.
Remove all packaging before operating the range, and properly and immediately dispose of the packaging.
Keep all packaging away from children.
Do not keep objects of interest to children on or around the range.
Do not operate the range if it is damaged or malfunctioning, or is missing parts.
Do not use oven cleaners/liners anywhere on the oven.
Do not heat sealed food containers.
Do not strike the oven glass.
When disposing of the range, cut off the power cord, and remove the door.
Shut off the gas, and unplug the range before service/maintenance.
Cook meat to an internal temperature of 160 °F (71 °C) and poultry to 180 °F (82 °C).
Air curtains or hoods that blow on the gas range shall be used only if the hood and range are designed and
tested per the Standard for Domestic Gas Ranges, ANSI Z21.1 • CSA1.1, and listed by an independent testing
lab for combination use.
Never use the range as a space heater.
Fire Safety
Do not store/place/use combustible items (e.g., paper, plastic, fabrics, gasoline) near the range.
Do not wear loose-tting or hanging garments while using the range.
Do not let pot holders or other ammable material touch a heating element. Do not use a towel or other
bulky cloth as a pot holder.
Do not douse a grease re with water but turn off the burner, and smother the re with a tight- tting lid, or
use a multi-purpose, dry-chemical, or foam extinguisher.
For oven res, keep the door closed, and press OFF. Do not open the door until the re goes out. If needed,
use a multipurpose, dry-chemical, or foam extinguisher.
Do not heat sealed containers; pressure may burst the container and cause injury.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 5INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 5 2023-02-23 오전 9:57:362023-02-23 오전 9:57:36
English6
Important safety instructions
WARNING
Read these instructions thoroughly to reduce risk of property damage, re, personal injury, and death, and to
ensure proper installation.
Gas Safety
If you smell gas:
do not use the range, and close the gas valve.
do not light a match, candle, or cigarette.
do not turn on any gas or electric appliances.
do not plug in a power cord or touch an electrical switch.
do not use any phone in your building.
evacuate the building.
immediately call your gas supplier from a neighbor’s phone; follow the supplier’s directions.
if you cannot reach your gas supplier, call the re department.
Checking For Gas Leaks
Leak-test the range per manufacturer directions. Do not use a ame to check for leaks. With a brush, spread
a soap-and-water solution around the area in question. If there is a gas leak, small bubbles will appear in the
solution. If unsure, call for professional help.
Electrical and Grounding Safety
Do not remove the ground prong.
Do not use an adapter or extension cord.
Do not use a damaged plug, cord, or loose power outlet, and do not alter the plug, cord, or outlet.
Do not put a fuse in a neutral or ground circuit.
Use a dedicated 240 Vac, 60 Hz, 50 Amp breaker for the 48" Range and a 40 Amp breaker for the 36" Range.
A time-delay fuse or circuit breaker should be used. Plug only the range into this circuit.
Do not connect the ground wire to plastic plumbing/gas lines, or hot water pipes.
The range must be grounded. Grounding lowers the risk of electric shock by giving the current a safe path. If
unsure that your outlet is properly grounded, have a licensed electrician check it.
The range has a grounded, 4-prong, plug that must be inserted in a grounded, 4-prong outlet that meets all
local ordinances. If codes allow a separate ground wire, a qualied electrician should determine its path.
Electrical service to the range must conform to local codes, or in their absence, to the National Electrical
code/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1 or Latest
Revisions.
The owner shall ensure the range receives the proper electrical service.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 6INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 6 2023-02-23 오전 9:57:362023-02-23 오전 9:57:36
English 7
This section consists of general and specic safety instructions surrounding the range's installation.
WARNING
Read these instructions thoroughly to reduce risk of property damage, re, personal injury, and death, and to
ensure proper installation.
Installation Safety
The range should be installed/grounded/serviced by a qualied installer as instructed in this manual.
Do not service/alter/replace the range or any part of it unless as instructed in this manual. All other service
should be done by a qualied technician.
Remove all tape and packing material.
Use only new, exible connectors when installing the range.
Ensure the anti-tip device is properly installed (Pg. 20).
Due to the size and weight of the range, have two or more people move the range.
After unpacking the product, remove all accessories, taking care with heavy pieces.
Verify that no parts came loose during shipping.
Ensure the range is correctly installed/adjusted by a qualied service technician or installer for the type
of gas (natural or LP) you will use. For the range to use LP gas, the installer must replace all surface burner
orices with the provided LP orice set, and reverse the GPR adapter. These adjustments must be made
per manufacturer instructions and local regulations. The qualied agency performing this work shall be
responsible for the gas conversion.
Installation of this range must conform with local codes or, in their absence , with the National Fuel Gas Code,
ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with the current Natural Gas and
Propane Installation Code, CAN/CGA-B149.1, or the current Propane Installation Code, CAN/ CGA-B149.2, and
with local codes where applicable. This range has been design-certied by UL according to ANSI Z21.1/CSA
1.1, latest edition.
Location Safety
Install the range indoors away from weather/water/strong drafts.
If the range is near a window, do not hang paper blinds or long curtains that could be blown over/onto the
range.
The range must be installed within easy reach of a grounded, 4-prong outlet.
Wall and cabinet coverings around the range must withstand heat up to 194 °F (90 °C).
Select a level, sturdy oor that can support the range’s weight (48": 564 lbs.). Synthetic ooring
(e.g., linoleum) must withstand 180°F (82°C) without shrinking, warping, or discoloring. The range must be
separated from carpeting by a sheet of ¼" plywood or similar insulator.
The range needs sufcient space all around the chassis for its vents to properly exhaust heat and fumes,
thus ensuring safe operation.
Avoid cabinet storage above the range; otherwise, allow at least 30 in. (76.2 cm) from cooking surface to
cabinet bottom; or install a range hood that projects outward at least 5 in. (12.7 cm) beyond the cabinetry.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 7INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 7 2023-02-23 오전 9:57:362023-02-23 오전 9:57:36
English8
Important safety instructions
This section consists of general and specic safety instructions surrounding the range's installation.
WARNING
Read these instructions thoroughly to reduce risk of property damage, re, personal injury, and death, and to
ensure proper installation.
Cooktop Safety
Turn all burners off if not using the range.
Do not line the grates or any part of the cooktop with foil.
Do not leave burners unattended on medium or high settings.
Before igniting, ensure burners and caps are properly seated.
Use LITE (ame symbol) to ignite a burner. If the burner does not stay lit, turn the knob OFF, and wait
5 minutes for the gas to dissipate, then retry.
When setting a burner to simmer, turn the knob slowly; ensure the burner stays lit.
Place only cookware on the cooktop.
The cooktop is designed to cook with a wok or wok-ring attachment.
Food should only be cooked under an active ventilation hood.
Before removing cookware, turn off the burner, and remove food/cookware when done cooking.
Burners should be off and all surfaces cool before removing grates and burner parts.
After cleaning the burner head, dry it completely before re-assembly.
Assemble the dual-burner spreader so its spark mark is next to the electrode.
Do not pour water or other liquids into the cooktop.
Select cookware that is designed for cooktops and that covers the grate. Burner ames should stay fully
under the cookware.
Do not use cookware that is much larger than the grate.
Turn cookware handles away from active burners and the cooktop front edge.
Heat frying-oil slowly, and watch as it heats. When frying at high heat, stand at a safe distance,
and monitor the oil constantly. If combining fats/oils, mix them together before heating.
Use a deep-fry thermometer if possible to avoid heating the oil beyond its smoke point.
Fry with minimal oil. Thaw food fully before frying; do not fry icy or overly cold food. Let oil/fat cool to
room temperature before moving the cookware.
To avoid delayed-eruptive boiling, let oil/fat stand at least 20 seconds after turning off the burner to
stabilize the temperature.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 8INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 8 2023-02-23 오전 9:57:362023-02-23 오전 9:57:36
English 9
This section consists of general and specic safety instructions surrounding the range's installation.
WARNING
Read these instructions thoroughly to reduce risk of property damage, re, personal injury, and death, and to
ensure proper installation.
Oven Safety
Do not use the oven for non-cooking purposes such as drying clothes or storage. Use the oven for cooking
purposes only.
Ensure the oven racks are placed on the same level on each side.
Do not spray water on the oven glass while the oven is on or just after you turn it off.
Do not clean the door gasket.
Do not use cover/line any part of the oven with aluminium foil or like material.
When using the oven, stand to one side when opening the door.
Keep the oven free from grease buildup.
Ensure the oven is completely cool before adjusting the oven racks.
Do not leave plastic items in the oven.
To avoid damaging the burner control knobs or oven control, always bake/broil with the oven door closed.
Do not put meat too close to the broil element; trim excess fat before cooking meat.
Use cooking bags as directed by the bag manufacturer.
Do not use abrasive cleaners or metal scrapers to clean the oven-door glass.
Do not try to operate the oven during a power failure.
If power fails, turn the oven off. If the oven is not turned off and power returns, the oven may begin to
operate again. Unattended food could catch re or spoil.
Self-Cleaning Safety
During self-cleaning, the oven operates at about 800 °F (427 °C). Do not touch any surfaces of the range
during a self-cleaning cycle, and keep children away from the oven.
Before operating the self-clean cycle, wipe excess food residue from the oven. (Excess grease may ignite,
causing smoke damage.
Before self-cleaning, remove all racks, cookware, and utensils from the oven. Only porcelain- coated oven
racks may be left in the oven.
Stand aside when opening the oven door after self-cleaning.
If the self-cleaning cycle malfunctions, turn off the oven and circuit breaker, and contact a qualied service
technician.
Fumes released during self-cleaning can be harmful/fatal to pet birds. Move birds to a distant, well-
ventilated room.
Do not use commercial oven cleaner or protective coating on the oven interior/exterior.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 9INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 9 2023-02-23 오전 9:57:372023-02-23 오전 9:57:37
English10
Product Specications
What Is Included (DOP48C86D**)
The range comes with brass and porcelain burner caps to suit customer preference.
Grates (3) Burner heads (6)
and Burner caps (8) Glide racks (2)
Convection lters (3) Temp. Probes (2) Wire rack (1)
Small rack (1)* Steam trays (2)* Anti-tip bracket (1)
WOK ring (1) Half steam trays (2)*
*Steam ovens only
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 10INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 10 2023-02-23 오전 9:57:392023-02-23 오전 9:57:39
English 11
What Is Included (DOP36C86D**)
The range comes with brass and porcelain burner caps to suit customer preference.
Grates (3) Burner heads (6)
and Burner caps (8) Glide racks (2)
Convection lters (2) Temp. Probe (1) Wire rack (1)
WOK ring (1) Anti-tip bracket (1)
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 11INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 11 2023-02-23 오전 9:57:402023-02-23 오전 9:57:40
Product Specications
English12
Needed Tools and Parts
Parts Needed
Gas line shut-off valve Flexible metal appliance
connector ¹/₂ in (ID) x 5 ft
Flare union adapter
³/₄ in (NPT) x ¹/₂ in (ID)
135-degree elbow (optional) Lag bolt or 1/2-in (OD)
sleeve anchor
Flare union adapter
1/2 in (NPT x 1/2 in (ID)
Tools Needed
Flat-blade screwdriver Phillips screwdriver Open-end or adjustable wrench
Pipe wrench (2) Nut driver Pencil and ruler
Level Pipe joint compound Utility knife
Soapy water solution Drill with ¹/8" or 3/16" bit
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 12INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 12 2023-02-23 오전 9:57:412023-02-23 오전 9:57:41
English 13
Installation Requirements
Pre-Installation Checklist
1. Before installing the range, read this manual thoroughly.
2. Plan for a location where the range will not be subject to strong drafts.
3. Remove packaging, grate boxes, regulator with literature, and literature package from the range, verify that
all items are present before beginning the installation.
General Requirements
Clearances and Dimensions
For over-the-range (OTR) over gas stove, follow the local gas code.
For safe operation, provide adequate space between the range and combustible surfaces. Location of the
electrical outlet and gas piping may be adjusted to meet the dimensions and clearances in this manual.
The range may be installed ush to the rear wall. A non-combustible material must be installed on the rear
wall between the range and hood. It is not necessary to install non- combustible material directly behind the
range. Openings in the wall behind the range or in the oor below must be sealed.
Canada only: A free-standing range shall be installed at least 4.7 in. (12 cm) from all adjacent surfaces.
CAUTION
The range complies with the maximum allowable wood-cabinet temperature of 194 °F (90 °C). Ensure the
adjacent wall covering, countertops, and cabinets can withstand such heat to avoid discoloration, delamination, or
melting.
Minimum Dimensions
WARNING
Regarding overhead cabinets, a hood should be installed that projects at least 5" (12.7 cm) beyond the cabinetry
face to dissipate heat in those cabinets. The hood must consist of sheet metal at least 0.0122" thick. Install the
hood with at least 1/4" clearance between it and the bottom of the combustible material or metal cabinet. The
hood must be at least as wide as the range and centered over it. Clearance between the cook surface and hood
bottom must be at least 24". (For above-range cooking appliances, follow that appliance's installation criteria.)
30" (76.2 cm) minimum clearance between the cook surface and bottom of an unprotected wood/ metal
cabinet; or if no 30" (76.2 cm) min. clearance, 24" (61 cm) min. when the bottom of the wood/metal cabinet
is protected by at least 0.250" (0.640 cm) ame-retardant millboard covered with at least No. 28 MSG sheet
steel, 0.015" (0.038 cm) stainless steel, 0.024" (0.061 cm) aluminum, or 0.020" (0.051 cm) copper.
18 in. (45.7 cm) minimum between the countertop and adjacent cabinet bottom.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 13INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 13 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
Installation Requirements
English14
Product Dimensions — Product tolerances: ±1/16” (±1.6 mm)
DOP36C86D**: 35 7/8” (91.1 cm) wide ; DOP48C86D**: 47 7/8” (121.6cm)
48" (121.9 cm)
28 1/8" (71.4 cm)
27 1/2" (69.9 cm)
26" (66.0 cm)
23 15/16" (60.8 cm)
Front of open door
Front of handle
Front of bull nose
Front panel
Rear of oven door
15/16" (2.4 cm) top of
trim to top of grates
(cooking surface)
36 1/8"
(91.8 cm)
29 7/8" (75.9 cm)***
24" (61.0 cm)
Cabinet
face
Range Installed Range Installed with Downdraft Vent
3/8" min. (1.0 cm)
at countertop
overhang needed
behind cutout
3/8" (1.0 cm)
space behind
downdraft vent
chassis to clear
stiffener
Countertop height:
36 3/16"
(91.9 cm) min.
37 1/2" (95.3 cm)
max. MR35-ER or
MR48-ER
downdraft vent
Back of
control
panel
Countertop* Stiffener
Cabinet
face
Cabinet Dimensions
Maintain all max/min dimensions and clearances in the diagrams below for safe use.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 14INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 14 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
English 15
CUTOUT DIMENSIONS
Range Model A B C
DOP36C86D** 42” (106.7 cm)*;
36” (91.4 cm)**
36” (91.4 cm)**;
36 1/8” (91.7 cm)*** 33 1/2” (84.8 cm)
DOP48C86D** 54” (137.2 cm)*;
48” (121.9 cm)**
48” (121.9 cm)**;
48 1/8” (122.2 cm)*** 43 1/2” (110.5 cm)
*Recommended, **Minimum, ***Maximum
13" (33.0 cm) max.5
Non-combustible
Surface along back wall
recommended
Top of
nished
counter 10" (25.4
cm) min. to
combustible
side walls
above range
(both sides)
Standard Cutout
with Range Hoof
Cutout with Optional Downdraft Vent
(Top View)
10" (25.4 cm) mín.
to combustible side
walls above range
(both sides)
Note 2
Backsplash
3" (7.6 cm)
C
B
Non-combustible rear
wall (recommended)
3/8" (1.0 cm) min.
at countertop
overhang
Suggested
location of
utilities3
37 1/2"
(95.3 cm)
max.
18" (45.7cm)4.5
Note 2
Grate
level
30" (76.2 cm)
max.1B
A
1. Vertical from range grate level to combustible overhead surface; if installing an overhead hood, see hood
specications for minimum required clearances.
2. Cabinet/countertop depth is at the customer's discretion, but cabinet face must not protrude beyond the rear
of the front panel. (See Product Dimensions, Pg. 14)
3. Consult local codes for exact location requirements.
4. Vertical from grate level to combustible surface.
5. Does not apply to cabinets more than a horizontal distance of 10" (25.4 cm) from the range edge.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 15INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 15 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
Installation Requirements
English16
Location Requirements
DOP48C86D** (rear)
3 11/16"
(9.4 cm)
28 9/16"
(72.5 cm)
5 1/2"
(13.9 cm)
E - Electrical wiring
access hole in bottom
Shown with
electrical access
cover removed
Gas Inlet
6 5/8"
(16.8 cm)
1. Measurement with appliance legs adjusted to lowest
height.
2. The hole size for the electrical wiring may be
increased to 1 1/8” (2.9 cm) by removing the conduit
bracket in the bottom of the range electrical box.
DOP36C86D** (rear)
6 3/4"
(17.1 cm)
28 9/16"
(72.5 cm)
6 5 /8"
(16.8 cm)
8 7/8"
(22.5 cm)
Shown with electrical
access cover removed
Gas Inlet
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 16INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 16 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
English 17
Gas and Electrical Service
See below for the recommended location of the gas inlet and electrical junction box/receptacle.
Existing utilities may be used if they are compatible with this range. Check local building codes for allowed
gasvalve locations.
An external manual shut-off valve must be installed between the gas inlet and range so the range's gas
supply can be turned on/off. Installation must allow access to the gas shut-off valve when the unit is
installed and access to the remote circuit-breaker panel/fuse box without moving the range.
The gas-supply piping and shut-off valve, and the electrical junction box/receptacle must be located so as
not to interfere with the range when it is installed.
The junction box and gas-shut off valve must be located so the range can be pulled out for service without
being disconnected.
Model D E F G
DOP36C86D** 8 7/8" (22.5 cm) 6 5/8" (16.8 cm) 11 3/16" (28.4 cm) 24 1/4" (61.6 cm)
DOP48C86D** 5 1/2" (13.9 cm) 6 5/8" (16.8 cm) 8 1/8" (20.6 cm) 26 5/8" (67.6 cm)
Recommended
position for
Gas stub
Recommended
position for
electrical outlet
G
E
D
F
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 17INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 17 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
Installation Requirements
English18
Gas Requirements
Provide Adequate Gas Supply
This oven's installation must conform to local codes or, in their absence, with the National Fuel Gas Code, ANSI
Z223.1/NFPA 54.
This range's cooktop is designed to operate at a manifold pressure of 5 in. (13 cm) of water column for natural
gas/natural gas at high altitude (NG-H) or 10 in. (25.4 cm) of water column for LP (propane)/LP at high altitude
(LP-H).
Verify that the oven is right for the provided gas service.
When verifying regulator function, inlet pressure must be at least 1 in. (2.5 cm) greater than the operating
(manifold) pressure as given.
GAS SUPPLY PRESSURE REQUIREMENTS*
Gas Type Minimum Manifold Pressure Minimum Gas Supply Pressure**
Natural Gas 5” Water Column 6” Water Column
LP (propane) Gas 10” Water Column 11” Water Column
* The gas supply pressure for testing the regulator setting shall be at least 1" water column (249 Pa) above the
specied manifold pressure;
** Maximum gas supply pressure for all models: 1/2 psi.
NOTE
The pressure regulator at the inlet of the cooktop manifold must stay in the supply line whether or not
natural or LP gas is used.
Use only the range's regulator, which must be installed in the gas line that runs from the cooktop gas inlet to
the gas shut-off valve.
An external manual shut-off valve must be installed between the gas inlet and range for turning on/off gas
to the appliance.
Ensure the connectors are installed by a qualied installer.
To avoid leaks and personal injury, never install used connectors on a new product. Use only new, exible
connectors.
Special Gas Requirements (gas models sold in Massachusetts)
WARNING
Gas leaks may occur in your system, creating a hazardous condition. Such leaks may not be detected
by smell alone; thus, gas suppliers recommend installing a UL-approved gas detector per manufacturer
specications.
The range must be installed by a plumber or gas tter certied by the State of Massachusetts.
A T-handle manual gas valve MUST be installed in the gas-supply line to your range.
If using a exible gas connector, multiple lines must not be connected in series.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 18INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 18 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
English 19
Electrical Requirements
Follow these directions to reduce risk of property damage, personal injury, or death.
WARNING
The owner shall ensure that the electrical service meets requirements and that the electrical outlet is installed by
a licensed electrician.
All Ranges
Plug the range into a grounded 4-prong outlet.
Do not remove the ground prong.
Do not use an adapter or an extension cord.
Do not use a damaged power plug, power cord, or loose power outlet.
Do not modify the power plug, cord, or outlet.
Do not put a fuse in a neutral or ground circuit.
Use a dedicated 240 Vac, 60Hz, 50 Amp breaker for the 48" range and a 40 Amp breaker for the 36" range. A
time-delay fuse or circuit breaker is recommended. Do not plug more than one appliance into this circuit.
Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
This range must be Earth grounded. If the range malfunctions or breaks down, grounding reduces the risk of
electric shock by providing a safe path for the current. This range’s power cord has a grounding plug, which
must be rmly plugged into an outlet that is properly installed and grounded according to local regulations. If
you are not sure your electrical outlet is properly grounded, have it checked by a licensed electrician.
Electrical service to the range must conform to local codes. Barring local codes, it should meet the latest
ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1 – Latest
Revisions.
The range owner shall ensure that the proper electrical service is provided for the range.
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 19INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 19 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
English20
Installation Instructions
Preparing for Installation
WARNING
If the gas or electric service provided does not meet the product specications, do not proceed with the
installation. Call the dealer, the gas supplier or a licensed electrician.
Before installing the range, you must locate and secure the anti-tip bracket to the oor.
Unpacking the Range
Unpack the parts box and verify that all required components have been provided. If any item is missing or
damaged, please contact your dealer immediately. Do not install a damaged or incomplete appliance.
Install the anti-tip device
WARNING
To reduce the risk of tipping, the appliance must be secured by properly installing the anti-tip device packed
with the appliance.
All ranges can tip, resulting in personal injury.
Tipping ranges can cause burns from spills, personal injury, and/or death.
To prevent accidental tipping, install and check the anti-tip bracket following the instructions and template
supplied with the bracket.
C
B
A
Range center line
TOP
VIEW
Range
front panel
1. If bracket is to be mounted to wood oor, use a drill with a 1/8" drill bit to drill the four holes.
If bracket is to be mounted the cement or ceramic oor, use a drill with a 3/16" drill bit to drill the four holes.
ANTI-TIP BRACKET PLACEMENT
Dim. DOP48C96D**
A5 1/16" (5.2 cm)
B22 11/16" (57.6 cm)
INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 20INSTALL_DOP36C86DLS_DA_DG68-01510A.indb 20 2023-02-23 오전 9:57:422023-02-23 오전 9:57:42
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Yes DOP36C86DLS/DA Guide d'installation

Catégorie
Cuisinières
Taper
Guide d'installation