Motorola Verve Ones Manuel utilisateur

ONES

Check www.verve.life for

latest product QSG and details

en

Your wireless earbuds and charge case

1en

Note: Twist the case to open it. The case indicates which

earbud is left and right. Left will be the master earbud and

connect to your device, the right will automatically connect to

the left.

Earbuds automatically turn on when removed from the case.

L

R

Light

Micro USB

Charger

Music & Call/Voice

Button

Microphones

Right charging pocket

Light

Left charging pocket

Please remove

isolation stickers

and charge

headset for at

least 2 hours

before rst

time use.

Step 1: Wear

2 en

Tip:

completely seals your ear canal for the best sound.

Note:

Wear

Insert the earbuds with the ear gel directed towards your ear

your ear.

Note: When you take the earbuds out of the case, you have 5

minutes to put them on, or they go dormant. Put them in the

case to wake them back up.

Try all

right when you get a complete seal, the gel feels comfortable,

and you get the best quality and loudest sound.

Turn on Bluetooth on your device.

Take both wireless earbuds out of case,

and put them in your ears.

On your device, go to the Bluetooth menu,

select for VerveOnes or VerveOnes+, pair &

connect. You will hear "Paired" when pairing

is complete.

Step 2: Pair with Bluetooth

3en

Note: Only the left earbud will connect to your device. The

right will connect to the left. The left earbud may also be used

as a single headset. Certain versions of this headset may only

have tones and no voice prompts.

Some devices may request permission to access your contacts

and call history. You may choose to allow or deny this request

if you wish to have caller name readout

Tip: When you hear “Earbuds linked” both earbuds are

connected for stereo use. When you hear “ VerveOnes

connected” your earbuds are connected to your device.

Music

4 en

• Press once to pause a track. Press again to resume.

• Double-press to go to the next track (depending on your

music player).

• Triple-press to go back one track (or start the song over).

• Press and hold until you to hear the Equalizer options

(between 3-6 seconds). Press again to select a preferred

setting.

Note: Playing the next or previous track depends on your

music player or app.

Tip: With Ear Detect ON (Default), if you take one earbud out

of your ear, music will continue to play. If you take out both

earbuds from your ears they will disconnect from the device.

ears.

Start playing music on your music player and then control it

with either earbud.

Music Control

Button

Calls & Voice Commands

5en

• Press once to answer an incoming call, or double-press to

reject it. You may also say “Answer” or “Ignore” for an

incoming phone call if prompted

• Press once to end a call.

• When not in a call and not playing music, press and hold to

start voice commands. You'll hear a tone. Release the button.

You'll hear a second tone from your phone. Say your

command. (Press and hold again to cancel a voice

command.)

Note: All calls will be heard in the left earbud only.

Voice commands use your phone’s voice control app and may

not be available in all countries.

Tip: When Ear Detect is ON, a call will automatically transfer to

the phone when both earbuds are removed.

When Ear Detect is OFF, a call will remain in the headset until

transfered to the phone via phone keypad.

When making and answering calls or using voice commands,

you can press either earbud.

Call/Voice Control

Button

Charge

6 en

Charge the earbuds

Put the earbuds into the case and

click and the earbud lights turn on.

Twist the case until it’s completely

closed.

Tip: Earbuds are designed to be a

to push earbuds from the side to

remove.

Charge the case

Charge the case and earbuds by

plugging in the charging cable. The

case light turns on when it’s

charging.

Micro USB

Charger

Light

Charge level

7en

Note:

conserve battery. The earbuds will continue to charge until full.

Case status lights

When your case is plugged into a wall charger, you’ll see

charging lights.

Charging

Full charge

Needs charging

Slow blinking white

Steady white

Blinking red

Note: Your battery is designed to last the life of the product. It

should only be removed by a recycling facility. Any attempt to

remove or replace your battery will damage the product and

void your warranty.

Your earbuds let you know when your battery level is low. You’ll

hear a message when there is 15 minutes of battery left.

Earbud status lights

Charging

Full charge

Needs charging

Slow blinking white

Steady white

Blinking red

Hubble Connect for VerveLife8 en

• Locate a lost earbud: Locate on a map the last time your earbud

was connected to your device.

• Adjust the equalizer:

your tunes sound the way you like.

• Pass-Through Audio (default OFF): Stay in tune with your

surroundings by turning Pass-Through on to hear noises around

you.

• Ear Detect (default ON): When Ear Detect is on, the earbud

when both earbuds are removed from your ears.

to your device until you put them in the case.

• Voice Prompts: Choose a new language for Voice Prompts from

the available selection.

• Help: Get answers.

Hubble Connect for VerveLife can greatly enhance your earbud

experience. Download app for free at the App Store

®

or Google

Play

TM

(Android

TM

4.4.4 or higher)

Note: Both earbuds must be in the case to make changes to

these settings via the app (Does not apply for the location or help

feature).

Application feature may change over time, please download the

latest version of the app to see all current features supported.

Hubble Connect

TM

for VerveLife

TM

Get best connection 9en

Optimal RF Zone

for pocket and wrist

worn devices

Left master earbud

Get best connection

To optimise bluetooth connection and minimize drops, keep

your device in the optimal RF zone.

Use this product responsibly

10 en

VerveOnes are designed to give the user great sounding

wireless earbuds. However the product should be used

responsibly.

Safety instructions for use

To avoid hearing damage, keep the volume at a moderate

level. Avoid listening to music at loud volume levels for

prolonged periods of time as this may cause permanent

hearing damage or hearing loss.

Your hearing is delicate and highly sensitive so please listen to

your music responsibly. For more information visit the

Deafness Research Foundation www.drf.org

Don't use VerveOnes when it is unsafe to do so. For example,

while operating a vehicle, cycling, crossing a road, or any

activity which requires your attention and ability to hear.

You should be aware of your surroundings and use VerveOnes

responsibly.

Help & more

11en

Manufactured, distributed, or sold by Binatone Electronics International LTD.,

trademarks or registered trademarks of Motorola Trademark Holdings, LLC.

and are used under license. Apple logo is a trademark of Apple Inc.,

registered in the U.S. and other countries. App Store is a service mark of Apple

Inc. Google Play and Android are trademarks of Google Inc.

All other trademarks are the property of their respective owners.

Product ID: SH001

Bluetooth ID: D029680

FCC ID: VLJ-SH001

IC ID: 4522A-SH001

• Get help: Visit www.motorolahome.com/support or visit

www.verve.life for help videos, FAQ's and more.

• Find accessories at: www.motorolahome.com or

www.verve.life

Note: If you’re watching video while using your earbuds, your

audio may be slightly out of sync with your video.

www.motorolahome.com

www.verve.life

La page charge ...

Motorola Verve Ones Manuel utilisateur

Ce manuel convient également à

Motorola Verve Ones Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents