Samsung BD-E6500 Manuel utilisateur

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Blu-ray

™

Disc Player

user manual

BD-E6500

02229B-BD-E6500-ZC-ENG.indd 1 2012-05-02 오후 6:02:05

Safety Information

|

2 English

WARNING

• To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

FCC NOTE (for U.S.A)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio or television reception, which can

be determined by turning the equipment off and on.

The user is encouraged to try to correct the

interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect this equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

• This class B digital product meets all

requirements of the Canadian Interference -

Causing Equipment Regulations.

Note to CATV system installer

This reminder is provided to call CATV system

installer's attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian

Electrical Code, Part I) that provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building as close to the

point of cable entry as practical.

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and Arrowhead within the

triangle is a warning sign alerting you of

dangerous voltage inside the product.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The explanation point within the triangle

is a warning sign alerting you of important

instructions accompanying the product.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

| NOTE |

\

If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this player, the player

cannot play the disc.

02229B-BD-E6500-ZC-ENG.indd 2 2012-05-02 오후 6:02:05

01 Safety Information

Precautions

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions

listed below.

Keep these operating instructions handy for future

reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including AV receivers) that

produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where it exits the

apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as when the power-supply cord or plug

is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping

- Avoid touching the surface of a disc where

data has been recorded.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a

soft cloth.

- When cleaning, wipe gently from the inside to

the outside of the disc.

• Disc Storage

`

Do not keep in direct sunlight.

`

Keep in a cool ventilated area.

`

Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids,

such as vases on the apparatus.

• To turn this apparatus off completely, you must

pull the power plug out of the wall socket.

Consequently, the power plug must be easily

and readily accessible at all times.

English 3

|

02229B-BD-E6500-ZC-ENG.indd 3 2012-05-02 오후 6:02:07

Safety Information

• Do not plug multiple electric devices into the

same wall socket. Overloading a socket can

cause it to overheat, resulting in a fire.

• Maintenance of Cabinet.

- Before connecting other components to this

player, be sure to turn them off.

- If you move your player suddenly from a cold

place to a warm place, condensation may

occur on the operating parts and lens and

cause abnormal disc playback. If this occurs,

unplug the player, wait for two hours, and

then connect the plug to the power outlet.

Then, insert the disc, and try to play back

again.

• If the product makes an abnormal noise or

produces a burning smell or smoke, turn off

the power switch immediately and disconnect

the power plug from the wall outlet. Then,

contact the nearest customer service center for

technical assistance. Do not use the product.

Using the product as it is may cause a fire or an

electric shock.

Using the 3D function

IMPORTANT HEALTH AND SAFETY

INFORMATION FOR 3D PICTURES.

Read and understand the following safety

information before using the 3D function.

• Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea, and

headaches.

If you experience any such symptom, stop

viewing 3D TV, remove the 3D Active Glasses,

and rest.

• Watching 3D images for an extended period of

time may cause eye strain. If you feel eye strain,

stop viewing 3D TV, remove your 3D Active

Glasses, and rest.

• A responsible adult should frequently check on

children who are using the 3D function.

If there are any reports of tired eyes, headaches,

dizziness, or nausea, have the child stop viewing

3D TV and rest.

• Do not use the 3D Active Glasses for other

purposes (Such as general eyeglasses,

sunglasses, protective goggles, etc.)

• Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving

around may cause you to bump into objects,

trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D

device (3D compliant AV receiver or TV) to the

player's HDMI OUT port using a high-speed

HDMI cable. Put on 3D glasses before playing

the 3D content.

• The player outputs 3D signals only through

HDMI cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed

according to the resolution of the original 3D

video, you can not change the resolution to your

preference.

• Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not

operate properly in 3D play mode.

• You must use a high-speed HDMI cable for

proper output of the 3D signal.

• Stay at least three times the width of the screen

from the TV when watching 3D images. For

example, if you have a 46-inch screen, stay 138

inches (11.5 feet) from the screen.

• Place the 3D video screen at eye level for the

best 3D picture.

• When the player is connected to some 3D

devices, the 3D effect may not function properly.

• This player does not convert 2D content into

3D.

• "Blu-ray 3D" and "Blu-ray 3D" logo are

trademarks of the Blu-ray Disc Association.

Copyright

manual may be reproduced or copied without the

prior written permission of Samsung Electronics

Co.,Ltd.

|

4 English

02229B-BD-E6500-ZC-ENG.indd 4 2012-05-02 오후 6:02:08

Contents

English 5

|

SAFETY INFORMATION

2 Warning

3 Precautions

3 Important Safety Instructions

3 Disc Storage & Management

3 Handling Cautions

4 Using the 3D function

4 Copyright

GETTING STARTED

7 Disc and Format Compatibility

7 Disc types and contents your player can

play

7 Disc types your player cannot play

8 Region Code

8 Logos of Discs the player can play

9 Supported Formats

11 Accessories

12 Front Panel

12 Rear Panel

13 Remote Control

13 Tour of the Remote Control

14 Setting the Remote Control to Operate

Your TV

CONNECTIONS

15 Connecting to a TV

16 Connecting to an Audio System

16

Method 1

Connecting to an HDMI

supported AV receiver

16

Method 2

Connecting to an AV receiver

with Dolby Digital or DTS decoder

17 Connecting to External Devices

18 Connecting to a Network Router

18 Wired Network

18 Wireless Network

SETTINGS

19 The Initial Settings Procedure

19 The Home Screen

20 HDMI Input

20 Accessing the Settings Screen

20 Buttons on the Remote Control Used for

the Settings Menu

21 Settings Menu Functions

26 Networks and the Internet

26 Configuring Your Network Connection

28 Wi-Fi Direct

29 Soft AP

30 AllShare Settings

30 Upgrading Software

30 By Online

31 By USB

31 By Disc

31 By Downloaded

32 Standby Mode Upgrade

MEDIA PLAY

33 Playing Commercial Video Discs

33 The AllShare Play Screen

33 Accessing the AllShare Play Screen

33 The AllShare Play Screen at a Glance

33 Playing Files on a USB Device or USB

Compatible Mobile Phone

34 Playing Commercial Audio Discs

34 Music Screen Controls

35 Playing a Disc with User Recorded

Content

35 Using the AllShare Network Function

35 To Download the AllShare Software

36 Playing Content Located on Your PC or

DLNA Device through the Blu-ray Disc

Player

36 Controlling the Playback of Content

Located on Your PC with Your Smart

Phone

02229B-BD-E6500-ZC-ENG.indd 5 2012-05-02 오후 6:02:08

Contents

|

6 English

NETWORK SERVICES

44 Using Smart Hub

44 Smart Hub at a Glance

45 Using the Web Browser

46 BD-LIVE™

APPENDIX

47 Compliance and Compatibility Notice

48 Copy Protection

48 Network Service Disclaimer

49 License

50 Additional Information

50 Note

52 Resolution according to the contents type

53 Digital Output Selection

54 Troubleshooting

56 Repairs

56 Specifications

37 Controlling Video Playback

37 Buttons on the Remote Control used for

Video Playback

37 Using the Tools Menu

39 Controlling Music Playback

39 Buttons on the Remote Control used for

Music Playback

39 Using the Tools Menu

40 Repeating Tracks on an Audio CD

40 Shuffling Tracks on an Audio CD

40 Creating a Playlist from a CD

40 Ripping

41 Playing Photo Contents

41 Using the Tools Menu

42 Using the Tools Menu when a file is

highlighted

02229B-BD-E6500-ZC-ENG.indd 6 2012-05-02 오후 6:02:09

02 Getting Started

Getting Started

Disc and Format Compatibility

Disc types and contents your player can play

Media Disc Type Details

VIDEO

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded and

finalized, or a USB storage media containing MKV, MP4 contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media

containing MP3 or WMA contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media

containing JPEG contents.

| NOTE |

\

The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

\

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

\

Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

\

Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 25 Mbps.

\

Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio

adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

\

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

Disc types your player cannot play

• HD DVD

• DVD-ROM/PD/

MV, etc

• DVD-RAM

• Super Audio CD

(except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio only,

not graphics.)

• 3.9 GB DVD-R for

Authoring.

English 7

|

02229B-BD-E6500-ZC-ENG.indd 7 2012-05-02 오후 6:02:09

Getting Started

Region Code

Both players and discs are coded by region.

These regional codes must match for a disc to

play. If the codes do not match, the disc will not

play.

The Region Number for this player is displayed on

the rear panel of the player.

Disc Type

Region

Code

Area

Blu-ray Disc

A

North America, Central America,

South America, Korea, Japan,

Taiwan, Hong Kong and South

East Asia.

B

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

C

India, China, Russia, Central and

South Asia.

DVD-VIDEO

1

The U.S., U.S. territories and

Canada

2

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

3

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

4

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

5

Russia, Eastern Europe, India,

most of Africa, North Korea,

Mongolia

6

China

Logos of Discs the player can play

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE

NTSC broadcast system in

U.S.A, Canada, Korea, Japan

|

8 English

02229B-BD-E6500-ZC-ENG.indd 8 2012-05-02 오후 6:02:12

02 Getting Started

Supported Formats

Video File Support

File Extension Container Video Codec Resolution

Frame rate

(fps)

Bitrate (Mbps) Audio Codec

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

AVI

MKV

ASF

MP4

3GP

VRO

VOB

PS

TS

MPEG4 SP/ASP

1920x1080

6~30

20

Dolby Digital

LPCM

AAC

HE-AAC

WMA

DD+

MP3

DTS

H.264 BP/

MP/HP

25

Window

Media Video v9

1920x1080

25

MPEG2

24/25/30

MPEG1 352x288

24/25/3 20

`

Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be played if its

content is defective or corrupted.

- Normal playback is not guaranteed if the file's container information is wrong or the file itself is

corrupted.

- Files having higher bit or frame rates than standard may stutter when played back.

- The seek (skip) function is not available if the file's index table is damaged.

- When you playback a file remotely through a network connection, video playback may stutter

depending on the network speed.

- Some USB/Digital camera devices may not be compatible with the player.

`

Video decoder

- Supports up to H.264 Level 4.1

- Does not support GMC 2 or higher

`

Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is more than 2.

- Does not support WMA sampling rate of 22050Hz mono.

English 9

|

02229B-BD-E6500-ZC-ENG.indd 9 2012-05-02 오후 6:02:12

Getting Started

`

Comments

- MPEG4 : Supports up to GMC 1-Warping Point.

- H.264 : Supports up to BP/MP/HP Level 4.1.

- WMV : Supports V9, VC1 SP/MP/AP L3.

- MPEG1 : Does not support D-picture.

- MPEG2 : Supports up to Hight Profile High

Level.

| NOTE |

\

Some MKV and MP4 format discs may not play,

depending on their video resolution and frame rate.

Music File Support

File

Extension

Container

Audio

Codec

Support Range

*.mp3

MP3

MP3 -

*.wma

WMA

* Sampling rates (in

kHz) - 8, 11, 16,

22, 32, 44.1, 48

* Bitrates - All bit-

rates in the range

5kbps to 384kbps

Notes on the USB connection

• Your player supports USB storage media, MP3

players, digital cameras, and USB card readers.

• Some USB/digital camera devices may not be

compatible with the player.

• Your player supports the FAT16, FAT32, and

NTFS files systems.

• Connect USB devices directly to the player's

USB port. Connecting through a USB cable

may cause compatibility problems.

• Inserting more than one memory device into

a multi-card reader may cause the reader to

operate improperly.

• The player does not support the PTP protocol.

• Do not disconnect a USB device during a

"loading" process.

• The bigger the image resolution, the longer the

image takes to display.

• This player cannot play MP3 files with DRM

(Digital Rights Management) downloaded from

commercial sites.

• Your player only supports video that is under

30fps (frame rate).

• Your player only supports USB Mass Storage

Class (MSC) devices such as thumb drives and

USB HDD. (HUB is not supported.)

• Certain USB HDD Devices, multi-card readers

and thumb drives may not be compatible with

this player.

• If some USB devices require excessive power,

they may be limited by the circuit safety device.

• If playback from a USB HDD is unstable, provide

additional power by plugging the HDD into a

wall socket.

If the problem continues, contact the USB HDD

manufacturer.

• You must remove the USB storage device

safely. (by performing the "Safely Remove

USB" function to prevent possible damage to

the USB memory.)

Press the HOME button to move to the home

screen, press the YELLOW (C) button, and

then press the

v

button.

• SAMSUNG is not responsible for any data file

damage or data loss.

• Your player does not support compression file,

sparse file and encryption file of NTFS.

- Before disconnecting a USB device, please

use USB Safety Removal.

- If you don't use USB Safety Removal, your

data on USB device can be corrupted or lost

- You can repair or format a USB device on

your Desktop PC. (MS-Windows OS only)

|

10 English

02229B-BD-E6500-ZC-ENG.indd 10 2012-05-02 오후 6:02:12

02 Getting Started

AVCHD (Advanced Video Codec High Definition)

• This player can play back AVCHD format discs. These discs are normally recorded and used in

camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional

image compressing format.

• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that use

"x.v.Color" format.

• "x.v.Color" is a trademark of Sony Corporation.

• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony

Corporation.

| NOTE |

\

Some AVCHD format discs may not play, depending on the recording conditions.

AVCHD format discs need to be finalized.

\

"x.v.Color" offers a wider color range than normal DVD camcorder discs.

Accessories

Check for the supplied accessories shown below.

PANDORA

DIGITAL

SUBTITLE

INPUT

HUB

PANDORA

DIGITAL

SUBTITLE

INPUT

1

4

7

VOL+

2

8

0

VOL–

3

6

9

SOURCE

DISC MENU

HOME SMART

TITLE MENU

VOL VOL

POPUP

A B C D

SUBTITLE HDMI IN

TV

HUB

– +

INFOTOOLS

RETURN

EXIT

BONUS

5

AUDIO

VIEW

Batteries for Remote Control (AAA Size)

User Manual Remote Control

English 11

|

02229B-BD-E6500-ZC-ENG.indd 11 2012-05-02 오후 6:02:13

Getting Started

Front Panel

| NOTE |

\

To upgrade the player's software through the USB Host jack, you must use a USB memory stick.

\

When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the

remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

v

button.

Rear Panel

DISPLAY USB HOST

POWER BUTTON

REMOTE CONTROL SENSOR

STOP BUTTON EJECT BUTTON

ENTER BUTTON

DISC SLOT

PLAY/PAUSE BUTTON

LAN HDMI OUT

HDMI IN DIGITAL AUDIO OUT

|

12 English

02229B-BD-E6500-ZC-ENG.indd 12 2012-05-02 오후 6:02:14

02 Getting Started

Remote Control

Tour of the Remote Control

Installing batteries

| NOTE |

\

If the remote does not operate properly:

- Check the polarity +/– of the batteries.

- Check if the batteries are drained.

- Check if the remote sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

| CAUTION |

\

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

PANDORA

DIGITAL

SUBTITLE

INPUT

HUB

PANDORA

DIGITAL

SUBTITLE

INPUT

1

4

7

VOL+

2

8

0

VOL–

3

6

9

SOURCE

DISC MENU

HOME SMART

TITLE MENU

VOL VOL

POPUP

A B C D

SUBTITLE HDMI IN

TV

HUB

– +

INFOTOOLS

RETURN

EXIT

BONUS

5

AUDIO

VIEW

Press to eject a disc.

After setup, allows you to set the input

source on your TV.

Turn the player on and off.

Return to the previous menu.

These buttons are used both for menus

on the player and also several Blu-ray Disc

functions.

Press numeric buttons to operate options.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to search backwards or forwards.

Use to access various audio functions on a

disc.

Press to move to the home screen.

Press to stop a disc.

Press to use Netflix.

Turn the TV on and off.

TV volume adjustment.

Press to pause a disc.

Press to play a disc.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Press to use the Tools menu.

Use to display the playback information.

Use to select menu items and change

menu values.

Press to exit the menu.

Use to enter the Popup menu/Title menu.

Press to use Smart Hub.

Press to use bonusview function. Press to change HDMI input signal.

English 13

|

02229B-BD-E6500-ZC-ENG.indd 13 2012-05-02 오후 6:02:14

Getting Started

Setting the Remote Control to Operate

Your TV

You can control certain functions of your TV with

this remote control.

Button Function

TV POWER Used to switch the television on and off.

TV SOURCE

Used to select an external source

connected to the TV.

TV VOL (+/–) Used to adjust the volume of the television.

| NOTE |

\

The functions listed above will not necessarily work on all

televisions. If you encounter problems, use the TV remote

control.

To determine whether your television is

compatible, follow the instructions below.

1. Switch your television on.

2. Point the remote control towards the

television.

3. Press and hold the TV POWER button, and

then enter the two-figure code in the table to

the right that corresponds to your TV's brand

by pressing the appropriate number buttons.

If your television is compatible with the

remote control, it will switch off.

The remote is now programmed to operate

the TV.

| NOTE |

\

If several codes are listed for your television brand, try

each one in turn until you find one that works.

\

If you replace the remote control’s batteries, you must set

the brand code again.

TV Control Codes

Brand Code

SAMSUNG

TV POWER+01, +02,

+03, +04, +05, +06,

+07, +08, +09

AIWA TV POWER+82

ANAM

TV POWER+10, +11,

+12, +13, +14, +15,

+16, +17, +18

BANG &

OLUFSEN

TV POWER+57

BLAUPUNKT TV POWER+71

BRANDT TV POWER+73

BRIONVEGA TV POWER+57

CGE TV POWER+52

CONTINENTAL

EDISON

TV POWER+75

DAEWOO

TV POWER+19, +20,

+23, +24, +25, +26,

+27, +28, +29, +30,

+31, +32, +33, +34

EMERSON TV POWER+64

FERGUSON TV POWER+73

FINLUX

TV POWER+06,

+49, +57

FORMENTI TV POWER+57

FUJITSU TV POWER+84

GRADIENTE TV POWER+70

GRUNDIG

TV POWER+49,

+52, +71

HITACHI

TV POWER+60,

+72, +73, +75

IMPERIAL TV POWER+52

JVC TV POWER+61, +79

LG

TV POWER+06, +19,

+20, +21, +22, +78

LOEWE TV POWER+06, +69

LOEWE OPTA TV POWER+06, +57

MAGNAVOX TV POWER+40

METZ TV POWER+57

MITSUBISHI

TV POWER+06,

+48, +62, +65

MIVAR TV POWER+52, +77

NEC TV POWER+83

NEWSAN TV POWER+68

Brand Code

NOBLEX TV POWER+66

NOKIA TV POWER+74

NORDMENDE

TV POWER+72,

+73, +75

PANASONIC

TV POWER+53,

+54, +74, +75

PHILIPS

TV POWER+06,

+55, +56, +57

PHONOLA

TV POWER+06,

+56, +57

PIONEER

TV POWER+58,

+59, +73, +74

RADIOLA TV POWER+06, +56

RADIOMARELLI TV POWER+57

RCA TV POWER+45, +46

REX TV POWER+74

SABA

TV POWER+57,

+72, +73, +74,

+75

SALORA TV POWER+74

SANYO

TV POWER+41,

+42, +43, +44,

+48

SCHNEIDER TV POWER+06

SELECO TV POWER+74

SHARP

TV POWER+36,

+37, +38, +39,

+48

SIEMENS TV POWER+71

SINGER TV POWER+57

SINUDYNE TV POWER+57

SONY TV POWER+35, +48

TELEAVA TV POWER+73

TELEFUNKEN

TV POWER+67,

+73, +75, +76

THOMSON

TV POWER+72,

+73, +75

THOMSON ASIA TV POWER+80, +81

TOSHIBA

TV POWER+47,

+48, +49, +50,

+51, +52

WEGA TV POWER+57

YOKO TV POWER+06

ZENITH TV POWER+63

|

14 English

02229B-BD-E6500-ZC-ENG.indd 14 2012-05-02 오후 6:02:14

03 Connections

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI

IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

| NOTE |

\

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player

to an audio system to hear audio.

\

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

\

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player

automatically sets the HDMI output resolution to the highest supported by the TV.

\

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

\

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable.

\

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Audio

Video

English 15

|

02229B-BD-E6500-ZC-ENG.indd 15 2012-05-02 오후 6:02:15

Connections

Connecting to an Audio System

You can connect the Blu-ray player to an the audio system using the method illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the

HDMI IN jack on your receiver.

• Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to

the Digital Optical In jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

Audio

Method 2

Audio

Method 1

|

16 English

02229B-BD-E6500-ZC-ENG.indd 16 2012-05-02 오후 6:02:15

03 Connections

Connecting to External Devices

You can use the player to increase the number of devices you can connect to your TV by connecting up

to two external devices to the HDMI IN ports on the back of the player.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

| NOTE |

\

If you set "Pass Through HDMI IN 1" to On when an external device is connected to the HDMI IN 1 Jack, you can view the

output from the device on your TV without turning on the player.

Or

Camcorder Game

console

STB

English 17

|

02229B-BD-E6500-ZC-ENG.indd 17 2012-05-02 오후 6:02:16

Connections

Connecting to a Network Router

You can connect your player to your network

router using one of the methods illustrated below.

To use the AllShare network functionality, you

must connect your PC to your network as shown

in the illustrations.

The connection can be wired or wireless.

Wired Network

| NOTE |

\

Internet access to Samsung's software update server

may not be allowed, depending on the router you use or

your ISP's policy. For more information, contact your ISP

(Internet Service Provider).

\

DSL users, please use a router to make a network

connection.

Wireless Network

| NOTE |

\

If your wireless router supports DHCP, this player can use

a DHCP or static IP address to connect to the wireless

network.

\

Set your wireless router to Infrastructure mode. Ad-hoc

mode is not supported.

\

The player supports only the following wireless security

key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

\

Select a channel on the wireless router that is not

currently being used. If the channel set for the wireless

router is currently being used by another device nearby, it

will result in interference and communication failure.

\

If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router

or router to WEP, TKIP or TKIP-AES (WPS2Mixed), the

player will not support a connection in compliance with

new Wi-Fi certification specifications.

\

Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router

performance, distance, obstacles, interference by other

radio devices, etc).

Broadband

service

Wireless Router

Broadband

service

Broadband

service

Broadband modem

(with integrated router)

Broadband

modem

Router

Or

|

18 English

02229B-BD-E6500-ZC-ENG.indd 18 2012-05-02 오후 6:02:17

04 Settings

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not

configure the initial settings.

• The OSD (On Screen Display) may change in this

player after you upgrade the software version.

• The access steps may differ depending on the menu

you selected.

The Initial Settings Procedure lets you set the OSD

and menu languages, configure the connection

to your home network, choose the aspect ratio

output (screen size and format) that is correct for

your TV, and apply an upgrade to your player's

software, if one is available.

| NOTE |

\

If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings later.

See "Configuring Your Network Connection" on pages

26~28 for instructions.

\

If you want to display the Initial Settings screen again and

make changes, select Settings > System > Initial Settings in

the Home screen or select the Reset option. (See pages 23

or 25)

\

If you want to use an Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-CEC)-

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in both the

TV and the player.

3) Set the TV to the Initial Settings Procedure.

The Home Screen

1

Smart Hub : Starts Smart Hub. From Smart Hub,

you can access YouTube, games, and other apps.

2

AllShare Play : Play videos, photos or music

content from Disc, USB, PC or mobile devices.

3

HDMI Input : Change the input source to a device

such as a set-top-box or game console connected

to HDMI IN 1 or HDMI IN 2.

4

Settings : Set various functions to suit your

personal preferences.

`

Selecting an Option on the Home Screen

1. To select an option on the Home screen,

move the cursor using the ◄► buttons until

it highlights the option of your choice, and

then press the

v

button.

| NOTE |

\

If you leave the player in the stop mode for more than

5 minutes without using it, a screen saver will appear on

your TV. If the player is left in the screen saver mode for

more than 20 minutes, the power will automatically turn off.

AllShare Play HDMI Input

Set various functions to suit your personal preferences.

Smart Hub

1

3

4

Settings

2

English 19

|

02229B-BD-E6500-ZC-ENG.indd 19 2012-05-02 오후 6:02:17

Settings

HDMI Input

If you have connected an external device to

HDMI IN 1 or HDMI IN 2, you can use the HDMI

OUTPUT function to select the HDMI source to

activate.

1. Select HDMI Input on the Home screen, and

then press the

v

button.

2. Select HDMI IN 1 or HDMI IN 2, and then

press the

v

button.

| NOTE |

\

If Pass Through HDMI IN 1 is enabled, you can view the

output from the source on your TV without turning on the

player. (See page 23)

\

The HDMI 1 and HDMI 2 inputs do not support the

Anynet+ (HDMI-CEC) function.

\

Even if you have selected HDMI IN 1 or HDMI IN 2 as the

input source, when you restart the player, it automatically

resets the input selection to the default. To select an

HDMI source again, turn on the connected device and use

the HDMI Input function to re-select the HDMI source.

\

The HDMI input selection is displayed on the front panel

display.

\

Do not connect the player's HDMI output to the HDMI

input terminal directly.

Accessing the Settings Screen

1. Select Settings on the Home screen, and

then press

v

button. The Settings screen

appears.

2. To access the menus, sub-menus, and

options on the Settings screen, please refer

to the remote control illustration below.

Buttons on the Remote Control Used

for the Settings Menu

1

HOME Button : Press to move to the Home screen.

2

RETURN Button : Return to the previous menu.

3

v

(Enter) / DIRECTION Buttons :

• Press ▲▼◄► to move the cursor or select an

item.

• Press the

v

button to activate the currently

selected item or confirm a setting.

4

EXIT Button : Press to exit the current menu.

Detailed Function Information

Each Settings function, menu item, and individual

option is explained in detail on-screen. To view an

explanation, use the ▲▼◄► buttons to select the

function, menu item, or option. The explanation

will usually appear on the right side of the screen.

A short description of each Settings function

starts on the next page. Additional information on

some of the functions is also in the Appendix of

this manual.

Display

3D Settings

TV Aspect Ratio 16:9 Original

Smart Hub Screen Size Size 3

BD Wise On

Resolution Auto

Movie Frame (24Fs) Auto

HDMI Color Format Auto

HDMI Deep Color Auto

Progressive Mode Auto

Audio

Network

System

Support

PANDORA

DIGITAL

SUBTITLE

INPUT

HUB

PANDORA

DIGITAL

SUBTITLE

INPUT

1

4

7

VOL

+

2

8

0

VOL

–

3

6

9

SOURCE

DISC MENU

HOME SMART

TITLE MENU

VOL VOL

POPUP

A B C D

SUBTITLE HDMI IN

TV

HUB

– +

INFOTOOLS

RETURN

EXIT

BONUS

5

AUDIO

VIEW

1

2 4

3

|

20 English

02229B-BD-E6500-ZC-ENG.indd 20 2012-05-02 오후 6:02:18

La page charge ...

Samsung BD-E6500 Manuel utilisateur

Samsung BD-E6500 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents