1
HC-1621IR/1621IR-Pro
HC-1621P/1621P-Pro
Package Contents
HC-1621 series terminal………………………………………x1
Power adaptor............................................................................x1
Power cord…………………………………………………….x1
I/O cable cover……………………..………………………….x1
User manual...............................................................................x1
Recovery DVD………………………………………………...x1
Views of the HC-1621 Series
Front View of HC-1621IR/1621IR-Pro
HC-1621IR/1621IR-Pro/1621P/1621P-Pro
Infotainment Terminal
User Manual
1
2
3
4
5
6
7
1. Volume down
2. Volume up
3. Backlight brightness down
4. Backlight brightness up
5. Power LED
6. Power button
7. Light sensor
15631900010 Ver. A0
http://www.posiflex.com
2
SOME IMPORTANT NOTES
FCC NOTES
This system meets industry & government requirements and applicable
standards. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions
manual, may cause interference to radio communications. It has been tested
and found to comply with limits for a Class A digital device pursuant to
subpart B of Part 15 of FCC Rules, which are designed to provide reasonable
protection against interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference
in which case the user at his own expense will be required to take whatever
measures to correct the interference.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
AVERTISSEMENT CE CLASSE A
Cet équipement est conforme à la classe A de CISPR 32. Dans un
environnement résidentiel, cet équipement peut provoquer des interférences
radio.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any
person other than the authorized technicians. The user should consult his/her
dealer for the problem happening. Warranty voids if the user does not follow
the instructions in application of this merchandise. The manufacturer is by no
means responsible for any damage or hazard caused by improper application.
LIMITES DE GARANTIE
La garantie prend fin automatiquement lorsque la machine est ouverte par une
personne autre que les techniciens autorisés. L'utilisateur doit consulter son
revendeur pour le problème qui se produit. La garantie s'annule si l'utilisateur
ne suit pas les instructions d'application de cette marchandise. Le fabricant
n'est en aucun cas responsable de tout dommage ou danger causé par une
mauvaise application.
3
警告使用者
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，
在這種情況下，使用者會被要求採取某些適當的對策。
BATTERY CAUTION NOTES
Dispose of used batteries according to the instructions.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types)
Disposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
BATTERIE ATTENTION NOTES
Jetez les piles usagées conformément aux instructions.
Remplacement d'une batterie avec un type incorrect qui peut annuler
une sauvegarde (par exemple, dans le cas de certains types de batterie
au lithium)
Mise au rebut d'une batterie dans le feu ou dans un four chaud, ou
écrasement ou coupure mécanique d'une batterie pouvant entraîner une
explosion.
Laisser une batterie dans un environnement environnant à des
températures extrêmement élevées pouvant entraîner une explosion ou
la fuite de liquide ou de gaz inflammable.
Une batterie soumise à une pression atmosphérique extrêmement basse
pouvant provoquer une explosion ou une fuite de liquide ou de gaz
inflammable.
警告
本電池如果更換不正確會有爆炸的危險，請依製造商說明書處理用過之
電池。
4
Front View of HC-1621P/1621P-Pro
Rear View of HC-1621 Series
Note:
1. MSR is optional and reserved before shipped.
1
2
3
4
5
6
1. Volume down
2. Volume up
3. Backlight brightness down
4. Backlight brightness up
5. Power LED
6. Power button
Light sensor
IR receiver
Front facing camera
2D image scanner
(optional)
I/O port cover
Speaker
Speaker
Cover
for MSR
1
Screws holes
for VESA mount (100 x 100 mm)
Heat dissipation holes
Heat dissipation holes
Heat dissipation holes
5
Bottom View of HC-1621 Series
Rear Bottom View of I/O Ports
1
12VDC-IN power jack
2
HDMI port
3
Serial (DB9) port
(COM1 ~ COM4)
4
USB3.0 port
5
USB2.0 port
6
RJ45 LAN port
7
VGA port
8
RJ45 LAN port
Audio combo jack
USB2.0 port
1
2
3
4
5
6
7
8
Internal MIC
6
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the
connector of power adapter and all of the connectors of required
I/O cables respectively to the 12VDC-IN power jack and
appropriate I/O ports. Please make sure that each of the cables is
fully connected to each of the correct ports. Damages due to
incorrect connection or orientation are not covered by product
warranty!
Some cable connectors like the connectors of the COM or LAN
cables have to be gently inserted until a click is heard. It is
recommended that the I/O ports, such as COM port and VGA
port, should be screwed after the I/O cable connectors are
completely connected. And please make sure that each connector
has to be connected to the right peripheral device in the right way.
CAUTION: On doing insertion or extraction of a cable
connector, please always hold the connector head
itself instead of pulling the cable wire. Doing this
could damage the cables and ports, which is
considered as an artificial damage and is not
covered by the warranty.
ATTENTION: Lors de l'insertion ou de l'extraction d'un
connecteur de câble, veuillez toujours tenir la
tête du connecteur elle-même au lieu de tirer le
fil du câble. Cela pourrait endommager les
câbles, ce qui est considéré comme un dommage
artificiel et n'est pas couvert par la garantie. Le
cordon d'alimentation doit être connecté à une
prise de courant avec mise à la terre.
Note: The COM ports of HC-1621 series do not supply power by
default. To make the COM ports supply power, you can set
up the COM ports through the dedicated settings listed in
the table below.
7
HC-1621 series
COM1/2/3/4
5VDC
12VDC
BIOS Setting
v
x
Jumper Setting
v
v
Installing Optional Peripheral Devices
Posiflex HC-1621 series can work with multiple optional
peripheral devices, such as MSR, headset and the like.
Before installing an optional peripheral device, make sure that the
system is powered off and the external power source is removed
from the terminal to prevent electric hazard! Failure to follow the
warning description will void the product warranty!
For the detailed instruction, refer to the user manual of each of
the optional peripheral devices.
Connecting Power Adapter and I/O Cables
Before connecting power adapter and I/O cables to the I/O ports
of the terminal, please route and arranging the cables. Here, refer
to the following step-by-step instruction of cable routing and
arrangement for the details.
1. Remove the I/O port
cover.
2. Connect the connector of
the power adapter to the
12VDC-IN power jack of
the terminal and I/O
cables to the I/O ports of
the terminal.
8
3. Cover the bottom I/O
interface and gather the
I/O cables to the cable
arrangement area, as
indicated by the arrow.
Mounting the HC-1621 Series on the Wall (Optional)
If you are a user of HC-1621IR/1621IR-Pro provided with a
scanner, you can mount the terminal on the wall by using the
optional wall mount kit, SK-300, while if you are a user of HC-
1621IR/1621IR-Pro without any scanner, you can mount the
terminal on the wall by using the optional wall mount bracket,
WB5000.
If you are a HC-1621P/1621P-Pro user, you can mount the
terminal on the wall by using the optional wall mount bracket,
WB5000.
For detailed installation description, please refer to the
installation guide of wall mount kit you purchase.
Powering ON the HC-1621 Series
To power on the HC-1621 series, just press the power button; to
power it off, press and hold the button for 3 seconds.
Enabling/Disabling the Buttons
By enabling and/or disabling the buttons, you can use the
functions of Auto Backlight Adjustment, Control Button Locking,
and Power Button Locking.
Auto Backlight Adjustment
In the default condition, the backlight of the HC-1621 series must
be adjusted manually.
To use the function of automatic backlight adjustment, refer to
the following instruction.
Cable out
9
After the Backlight Brightness Up and Backlight Brightness
Down buttons are pressed once at the same time, the HC-1621
series will adjust its backlight automatically by detecting the
ambient light.
To disable the function of automatic backlight adjustment, press
once the Backlight Brightness Up or Backlight Brightness Down
buttons.
Locking the 4 Control Buttons
In the default condition, the 4 control buttons -- Volume Down,
Volume Up, Backlight Brightness Up, and Backlight Brightness
Down -- are for users to control.
To lock the 4 control buttons, refer to the following instruction.
To unlock the 4 control buttons, refer to the following instruction.
Setting the Power Button to “ON ONLY”
In the default condition, the power button is for you to easily
power on or off the HC-1621 series. In order to avoid users from
pressing the power button by mistake to make the system shut
Press once the Backlight Brightness
Up and Backlight Brightness Down
buttons at the same time.
+
Press once the Backlight Brightness
Up or Backlight Brightness Down
buttons to disable the automatic
backlight adjustment.
or
r
1
2
Press the Volume Up and Backlight
Brightness Up buttons sequentially
and then hold for 3 seconds.
1
2
Press the Volume Down and
Backlight Brightness Down buttons
sequentially and then hold for 3
seconds.
10
down accidently, you can make the system stay “always ON” by
locking the power button.
To lock the power button, refer to the following instruction.
To unlock the power button, refer to the following instruction.
Back to the Default Conditions
To make all of the buttons return to default conditions, refer to
the following instruction.
When you successfully make all of the buttons return to default
conditions, the 4 control buttons and the power button will be
unlocked and the automatic backlight must be adjusted manually.
Power LED Indicator
There is a power LED indicator on the front side of the HC-1621
series. After powering ON the terminal, you can read the terminal
operation status from the power status LED indicator. The LED
status is described below.
LED
Status
Description
POWER
Solid blue
Terminal ON
Solid orange
Power standby
Installing an Operating System
This product is highly professional equipment. Therefore, we do
NOT encourage you to install any operating system into this
1
2
Press the Volume Down, Volume Up,
and Backlight Brightness Up
buttons sequentially and then hold
for 3 seconds.
3
1
2
Press the Volume Down, Volume Up,
and Backlight Brightness Down
buttons sequentially and then hold
for 3 seconds.
3
1
2
Press the Volume Up, Backlight
Brightness Down, and Backlight
Brightness Up buttons sequentially
and then hold for 3 seconds.
3
11
machine without professional assistance. Posiflex Technology,
Inc. shall not be responsible for any technical support to
questions on this aspect. We suggest that you contact your dealer
for OS installation.
Operating System Recovery
For the HC-1621 series main terminal preloaded with an
operating system on HDD or SSD, Posiflex provides a recovery
DVD shipped with the main terminal for the preloaded operating
system. The system integrator shall take care of software
restoration after the OS is recovered.
If you plan to recover your operating system, we do NOT
encourage you to recover any operating system by yourself.
Please contact your service center for operating system recovery.
Operation Environment
This terminal must NOT be operated in an environment with
restricted ventilation. There must be at least 25 mm air clearance
around any top or side ventilation holes with free flow of air
around the unit at all times for system operation.
Specifications
HC-1621IR/1621IR-Pro
1621P/1621P-Pro
System Configuration
Processor
Intel Celeron G3900TE/Skylake-S/Kaby Lake-S platform, LGA
1151 Package
Chipset
Celeron/Core i3: with H110 chipset
Core i5/i7: with Q170 chipset (vPro support)
Memory
2 x DDR4 SO-DIMM sockets
Storage
2 x M.2 2280 SATA (AHCI) + 1 x SATA socket
Power Supply
12V/84W
OS Support
Windows 10 IoT (64-bit)
TPM
Yes, TPM2.0
Intel vPro Support
Yes, with Core i5/i7 CPU
Display & Touch
LCD
21.5" TFT LCD
12
Resolution
1920 x 1080
Touch
IR touch
PCAP touch
I/O & Expansion
Serial Port
4 x serial port
USB Port
7 x USB port (4 x USB3.0 + 3 x USB2.0, one USB2.0 port is
located on hotkey board)
LAN Port
2 x LAN (RJ-45) port
Display Port
1 x VGA port / 1 x HDMI port
Camera
N/A
Optional 1MP camera
Audio
2 x internal 3watt speaker /1 x audio combo jack/1 x internal MIC
Power
DC-in jack
Expansion Slot
1 x M.2 2230 for WiFi/BT
Hotkeys
1. Volume up + down
2. Brightness up + down
3. Power on/off
Wireless
WIFI + BT via M.2 2230 slot (optional)
Indicator
Power LED indicator (power on/Standby)
Dimension
546.63 x 61 x 377.49 (W x D x H in mm)
Net Weight
6.6 Kg
Mechanism
1. VESA 100 mounting
2. Designed with two I/O panels, one on the rear of the terminal
and the other one on the bottom of the terminal
Certification
CE/FCC
Environmental
Operating
Condition
0°C - 40°C, 20%RH - 90%RH
Storage
Condition
-20°C - 60°C, 10%RH - 90%RH
Options
Attachment
SA-105 (MSR) / SA-305 (MSR + SC reader +fingerprint reader)
2D Scanner
Externally attached to HC-
1621IR at the bottom of the
terminal (via WB5000 and SK-
300)
Integrated module for option
※
The product information and specifications are subject to change without prior notice. To get the detailed
information on HC-1621 series, please check this model from Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Posiflex HC-1621IR-Pro Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Posiflex HC-1621IR-Pro User manual
Documents connexes
-
Posiflex PC-2111-G2/2111E-G2 Manuel utilisateur
-
-
-
-
-
Posiflex RT-6115 Manuel utilisateur
-
Posiflex RT-5115 Manuel utilisateur
-
Posiflex RT-5015E Manuel utilisateur
-
-