Samsung BN68-03088A-01 Manuel utilisateur

Catégorie
Téléviseurs LED
Taper
Manuel utilisateur

Ce manuel convient également à

© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-03088A-01
LED TV user manual
LED TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs
Samsung.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de
atención al cliente de SAMSUNG.
Country
Customer Care Center
Web Site Address
CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger
Road Ridgeeld Park, NJ 07660-0511
[UC9000_NA]BN68-03088A-01L03.indb 1 2010-06-29 오전 10:32:45
2
English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format
television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven
aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to
view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned
in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
– In the United States : 1-800-SAMSUNG (1-800-726-7864)
– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news
bars at screen bottom etc.) on the screen. Constant displaying of a still picture can cause ghosting of the LED screen, which will affect image quality. To
reduce risk of this effect, please follow the recommendations below:
Avoid displaying the same TV channel for long periods.
Always try to display a full screen image.
Reducing brightness and contrast will help to avoid the appearance of after-images.
Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
[UC9000_NA]BN68-03088A-01L03.indb 2 2010-06-29 오전 10:32:46
3
Contents
ENGLISH
English
Getting Started
y List of Features ......................................................... 4
y Accessories .............................................................. 4
y Viewing the Control Panel ......................................... 5
y Mini Remote Control ................................................. 6
y Viewing the Touch Control ........................................ 7
y Connecting to an Antenna ...................................... 10
y Plug & Play (Initial Setup) ......................................... 10
Connections
y Connecting to an AV Device .................................... 11
y Connecting to an Audio Device ............................... 13
y Connecting to a PC ................................................ 14
y Changing the Input Source ..................................... 15
Basic Features
y How to Navigate Menus .......................................... 15
y Channel Menu ........................................................ 16
Seeing Channels 16
Using Favorite Channels 16
Memorizing Channels 16
Editing Channels 17
Other Features 17
y Picture Menu .......................................................... 18
Changing the Preset Picture Mode 18
Adjusting Picture Settings 18
Economical Solutions 18
Changing the Picture Options 19
Viewing TV using the 3D function 21
Setting up the TV with Your PC 24
y Sound Menu ........................................................... 24
Changing the Preset Sound Mode 24
Adjusting Sound Settings 24
Sound Settings 25
y Setup Menu ............................................................ 26
Setting the Time 26
Using the Sleep Timer 26
Setting the On / Off Timer 26
Locking Programs 27
Other Features 28
y Support Menu ......................................................... 30
Advanced Features
y Network Connection ............................................... 32
Connecting to a Wired Network 32
Connecting to a Wireless Network 34
y Media Play .............................................................. 39
Connecting a USB Device 39
Connecting to your PC through a network 39
Screen Display 41
Playing Multiple Files 44
Media Play - Additional Functions 44
y Anynet+ .................................................................. 46
Setting Up Anynet+ 47
Switching between Anynet+ Devices 47
Recording 48
Listening through a Receiver 48
Troubleshooting for Anynet+ 49
y Internet@TV ............................................................ 50
Getting Started with Internet@TV 50
Setting up Internet@TV 51
Using the Internet@TV service 53
PROFILE Widget 55
Widget Gallery 55
Troubleshooting for Internet@TV 56
y AllShare .................................................................. 57
About AllShare 57
Setting Up AllShare 57
Other Information
y Assembling the Cables ........................................... 59
y Securing the TV to the Wall ..................................... 60
y Troubleshooting ...................................................... 61
y Enclosed Wireless LAN Adapter .............................. 64
y License ................................................................... 65
y Specifications ......................................................... 65
y Dimensions ............................................................. 66
y Index ...................................................................... 67
y Regulatory Compliance Information......................... 68
Check the Symbol!
TOOLS
Note Step by Step Guide
This function can be used by pressing the
TOOLS button on the remote control.
Indicates additional information. Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
[UC9000_NA]BN68-03088A-01L03.indb 3 2010-06-29 오전 10:32:47
4
English
Getting Started
List of Features
y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
y Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 39).
y Internet@TV: You can use various internet services and view useful information and entertaining content (p. 50).
y AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 57).
y Self Diagnosis: You can check whether picture or sound operate normally (p. 30).
y 3D: This exciting new feature enables you to view 3D content.
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
y Owner’s Instructions
y Cleaning Cloth (BN63-01798B)
y Warranty Card / Safety Guide / Quick Setup Guide
AV Adapter Component Adapter Holder-Wire (4EA)
(BN39-01154H) (BN39-01154C) (BN61-05373A)
Mini Remote Control &
Lithium battery
Samsung Wireless Lan
Adapter
USB adapter
For stand type For wall mount type
(BN59-00788A) (WIS09ABGN2)
Touch Control
y Owner’s Instructions y Warranty Card / Quick Setup Guide
VOL
CH
MUTE
SOURCE
Touch Control Cable Power Adapter Touch Control Battery
Wall Mount Box (Assembly to Wall)
Three of each type of screw are supplied. Only two are required for assembly. The other is a spare.
A B
(2EA)
(3EA)
(3EA)
M5X65mm-Wood
(3EA)
(3EA)
M5X60mm-Machine
[UC9000_NA]BN68-03088A-01L03.indb 4 2010-06-29 오전 10:32:52
5
01 Getting Started
English
Viewing the Control Panel
The product color and shape may vary depending on the model.
To control the TV using the LED touch pad, tap the LED touch pad centered underneath the stand. The touch pad will
slide out by itself. The LED touch pad will slide back in if unused for a specified period of time.
3D Emitter The LED on the 3D emitter blinks only when sending a 3D signal.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER
button on the remote control.
MENU
Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the
buttons as you would use the
and buttons on the remote control.
Changes the channels. In the OSD, use the
buttons as you would use the
and buttons on the remote control.
(Power)
Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
SOURCE MENU
VOL CH
Power Indicator
Remote control sensor
Speakers Speakers
Woofer
3D Emitter
[UC9000_NA]BN68-03088A-01L03.indb 5 2010-06-29 오전 10:32:53
6
Getting Started
English
Mini Remote Control
The Mini Remote Control is a simplified remote control that consists of the power, channel and volume buttons only.
Description
This is a special remote control for the visually impaired and has Braille points on the Channel and Volume buttons.
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold
or distributed ONLY in California USA ‘Perchloate Material - special handling may apply, See www.dtsc.ca.gov/
hazardouswaste/perchlorate:’
Inserting the battery
1. Turn the battery cover counterclockwise to unlock it and then
separate the battery cover.
2. Insert a 3V Lithium battery with the + side facing down into the
battery cover.
3. Place the battery cover into the remote control aligning it with the
grooves and then turn the battery cover clockwise to lock the
cover.
If the remote control doesn’t work, check the following:
x
Is the TV power on?
x
Are the plus and minus ends of the batteries reversed?
x
Are the batteries drained?
x
Is there a power outage or is the power cord unplugged?
x
Is there a special fluorescent light or neon sign nearby?
Previous channel
Next channel
Volume decrease
Volume increase
Power On/Off button
IrDA transmitter
Point the IrDA transmitter at the TV
to use the mini remote.
OPEN
CLOSE
[UC9000_NA]BN68-03088A-01L03.indb 6 2010-06-29 오전 10:32:54
7
01 Getting Started
English
Viewing the Touch Control
Description
Power Turn the TV on and off.
MUTE Mute or unmute the sound.
SOURCE Display the source list (TV, PC, etc.) on the screen.
Volume Press to control the volume.
Channel Press to change channels.
Inserting the battery
1. Slide and open the battery cover
in the direction of the arrow.
2. Insert the battery with the
Samsung logo facing up.
3. Slide and close the battery
cover in the direction of the
arrow.
VOL
CH
MUTE
SOURCE
VOL
CH
MUTE
SOURCE
Battery cover
Charge Port
TV Power button
Touch screen
Speaker
Earphone jack
Front View Rear View
[UC9000_NA]BN68-03088A-01L03.indb 7 2010-06-29 오전 10:32:55
8
Getting Started
English
Remote Control Screen Display
1
Initial Screen
2
Drag to the Left direction
3
Tap the Navigation or Menu button.
4
Tap Services.
INTERNET@TV: Link to various internet
services (p. 50).
MEDIA.P: Displays Media Play (p. 39).
3D: Sets the 3D mode. (p. 22).
YAHOO!: Runs the Yahoo widget. (p. 54).
CHLIST: Displays channel lists on the screen
(p. 16).
FAV.CH: Displays Favorite Channel Lists on the
screen (p. 16).
P.SIZE: Selects the picture size (p. 20).
CC: Controls the caption decoder (p.
28).
MTS: Press to choose stereo, mono or
Separate Audio Program (SAP broadcast)
(p. 25).
Press to select additional channels (digital) being broadcasted by the same station. For example, to
select channel “54-3”, press “54”, then press “–” and “3”.
Returns to the previous channel.
Press to directly access channels.
CONTENT: Displays the Content View, which includes Channel List, Internet@TV, Media Play,
AllShare and 3D.
MENU: Brings up the OSD.
INTERNET@TV: Link to various internet services (p. 50).
RETURN
: Returns to the previous menu.
TOOLS
: Quickly select frequently used functions.
INFO : Displays information on the TV screen.
EXIT
: Exits the menu.
Buttons used in the Channel List, Internet@TV, Media Play menu, etc.
Use these buttons in Media Play and Anynet+ modes (p. 39, 46).
(: Controls recording for Samsung recorders that have the Anynet+ feature)
Selects the on-screen menu
items and changes the values
seen on the menu.
Keyboard
Navigation
TV Control Services
CONTENT MENU
INTERNET
@TV
Keyboard
Navigation
TV Control Services
TV Control Services
Keyboard
TV Control Services
[UC9000_NA]BN68-03088A-01L03.indb 8 2010-06-29 오전 10:32:55
9
01 Getting Started
English
Setting Up Your Remote
You can set up your Touch Control to control your TV in three ways:
As a standard, IR (Infra Red) remote
As an IR remote, your LCD Touch Control works the same way as a standard push button remote, except you touch icons and
symbols on the LCD screen to control your TV instead of pushing buttons. Using your Touch Control as an IR remote requires
no more set up than a standard remote and gives you access to most of the remote’s functions and features.
As an extended distance, Wi-Fi remote
As an extended distance, Wi-Fi remote, your Touch Control offers all the functions and features of the IR mode and, because
it uses Wi-Fi radio waves instead of infra red waves to control your TV, it lets you control your TV from a much greater distance
and even from around corners. It also gives you access to the Twin Display function which lets you watch the program or
content that is on your TV screen on the LCD screen of the Touch Control. The long distance, Wi-Fi mode requires a few
additional setup steps; possibly including re-initialization. It also requires you to attach Samsung’s Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV’s USB ports.
As a networked, Wi-Fi remote
As a networked, Wi-Fi remote, your Touch Control gives you all the functions and features of the IR and the extended distance
modes and also gives you access to the Multimedia function which lets you listen to or view music, movie, and picture files
from your PC on your TV screen. You can also download upgrades to your Touch Control’s software directly from the Internet.
The networked, Wi-Fi mode requires the largest number of setup steps. In addition, to use the networked, Wi-Fi mode,
you need a working local area network and a wireless router. You also need to attach Samsung’s Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV’s USB ports. To use the Multimedia function, you need to
install Samsung’s PC Share Manager on your PC. You can download PC Share Manager from http://www.samsung.com.
Setting up the Network
You can set up a wireless network for the Touch Control.
How to connect using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN.
2. On the Services screen, touch Settings Remote Settings.
3. Touch Network.
4. Touch the PBC(WPS).
5. If the Press PBC button on the access point within 120 seconds. message appears,
press the PBC button on the device to connect.
For more information, refer to the wireless network setup manual of the device to be connected.
6. If the device is connected properly to the TV after starting count on message box then message box will be disappeared
automatically.
If the connection fails, please retry after 2 minutes.
Connecting to network
To setup the wireless connection automatically, follow these steps:
1. Follow Steps 1 through 3 in the “How to connect using PBC (WPS)” procedure.
If the intended network cannot be found in the list, select to open the list of
networks again.
2. Select a network and connect to the network using the encryption method (PIN, security
key, ad-hoc, etc.) set for the network.
3. When the network connection is complete, select Test to perform a network test.
For the automatic IP, the AP will automatically define the IP Address, Subnet Mask,
Gateway and DNS server.
For the manual IP, you can select Edit and directly enter the IP Address, Subnet
Mask, Gateway and DNS server.
For Full Touch Control instructions, please read the Touch Control's user manual.
Press the PBC button on the
access point within 120
seconds.
Remaining Time : 112
Stop
Network
Auto Conguration
PBC(WPS)
Select a network
Unsecured
Unsecured
Secured
Secured
[UC9000_NA]BN68-03088A-01L03.indb 9 2010-06-29 오전 10:32:56
10
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1
Turn on the TV and
Touch Control.
y Turn on the Touch Control and then tap OK on
your remote.
It may take about one minute to establish a
wireless connection between the TV and Touch
Control using the Samsung Wireless LAN
Adapter.
2
Connect the Samsung
Wireless LAN Adapter
y Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung
Wireless LAN Adapter using the method shown on page 35.
y If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try
again.
3
Selecting a language
Press the or button, then press the ENTER
button.
Select the desired OSD (On Screen Display) language.
4
Selecting Store Demo
or Home Use
Press the or button, then press the ENTER
button.
y Select the Home Use mode. Store Demo Mode is for retail environments.
y To return the unit’s settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When you see the volume OSD, press and hold MENU for 5
sec.
5
Selecting an antenna
Press the or button, then press the ENTER
button. Select Air, Cable or Auto.
6
Selecting a channel
Press the or button, then press the ENTER
button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel Auto Program (p. 16).
Press the ENTER
button at any time to interrupt the memorization process.
7
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time (p. 26).
8
View the HD
Connection Guide
The connection method for the best HD screen quality is displayed.
9
Enjoy your TV.
Press the ENTER
button.
If You Want to Reset This Feature...
MENU Setup Plug & Play ENTER
ANT OUT
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
Cable
[UC9000_NA]BN68-03088A-01L03.indb 10 2010-06-29 오전 10:32:56
11
English
02 Connections
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN
x
For better picture and audio quality, connect to a digital device using an HDMI cable.
x
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
x
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
x
Be sure to use an HDMI cable with a thickness of 14 mm or less.
x
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
x
A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
ethernet function via HDMI.
x
This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the
ARC function is supported by the HDMI IN 2(ARC) port only.
If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case, set
3D Auto View or 3D Mode to Off.
x
The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the
TV is connected with an audio receiver that supports the ARC function.
WR
DVI OUT
R-AUDIO-L
AUDIO OUT
HDMI OUT
Device Device
WhiteRed
Audio Cable
(Not Supplied)
HDMI to DVI Cable (Not Supplied)
HDMI Cable
(Not Supplied)
[UC9000_NA]BN68-03088A-01L03.indb 11 2010-06-29 오전 10:32:57
12
English
Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
For better picture quality, the Component connection is recommended over the A/V connection.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
EX-LINK: Connector for service only.
PR PB Y
COMPONENT OUT
AUDIO OUT
R-AUDIO-L
W
W
W
R
R
G
B
AUDIO OUT
R-AUDIO-L
VIDEO OUT
R
Y
W R
R
B
G
WR
R
G
B
W R
W Y
Y
R
Device
Device
Red
Red
RedBlue
White
WhiteGreen
Yellow
Audio Cable
(Not Supplied)
Video Cable (Not Supplied)
Video Cable
(Not Supplied)
AV Adapter (Supplied)
AV Adapter (Supplied)
Component Adapter
(Supplied)
Audio Cable
(Not Supplied)
[UC9000_NA]BN68-03088A-01L03.indb 12 2010-06-29 오전 10:32:58
13
English
02 Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
DIGITAL AUDIO OUT (OPTICAL)
x
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TVs optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
x
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
OPTICAL
WR
R-AUDIO-L
AUDIO IN
Optical Cable (Not Supplied)
Audio Cable (Not Supplied)
Digital Audio System
Amplifier /
DVD home theater
Red White
[UC9000_NA]BN68-03088A-01L03.indb 13 2010-06-29 오전 10:32:59
14
English
Connections
Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
PC OUT
DVI OUT
AUDIO OUT
AUDIO OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-
-/-
-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT / DTV CEA
1920 x 1080p 67.500 60.000 148.500 +/+
NOTE
x
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not supported.
x
The set may operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
HDMI to DVI Cable (Not Supplied)
D-Sub Cable (Not Supplied)
Audio Cable (Not Supplied)
Audio Cable (Not Supplied)
[UC9000_NA]BN68-03088A-01L03.indb 14 2010-06-29 오전 10:33:01
15
English
02 Connections
Changing the Input Source
Source List
Use to select TV or an external input sources such as a DVD
/ Blu-ray player / cable box / STB satellite receiver.
MENU Input Source List ENTER
TV / PC / AV / Component / HDMI1/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
In the Source List, PC is always activated.
Edit Name
MENU Input Edit Name ENTER
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is
connected to the HDMI IN 1(DVI) port, you should set
the TV to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI IN
1(DVI) port, you should set the TV to DVI PC or DVI
Devices mode under Edit Name.
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
1 MENU button: Displays the main on-screen menu.
2 ENTER
/ Direction button: Move the cursor and
select an item. Confirm the setting.
3 EXIT button: Exits the on-screen menu.
4 RETURN button: Returns to the previous menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
2
/ Select an icon with the or
button.
3
ENTER
Press ENTER
to access the
sub-menu.
4
/
Select the desired submenu with
the or button.
5
/
Adjust the value of an item with the
or button. The adjustment in
the OSD may differ depending on
the selected menu.
6
ENTER
Press ENTER
to confirm the
selection.
7
EXIT
Press EXIT.
Keyboard
Navigation
TV Control Services
CONTENT MENU
INTERNET
@TV
Keyboard
TV Control Services
1
4
3
2
[UC9000_NA]BN68-03088A-01L03.indb 15 2010-06-29 오전 10:33:02
16
English
Basic Features
Channel Menu
Seeing Channels
Channel List
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
MENU Channel Channel List
ENTER
Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by
pressing the / and ENTER
buttons.
Then you can watch the selected channel.
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
x
Red (Antenna): Switches to Air or Cable.
x
B
Green (Zoom): Enlarges or shrinks a channel
number.
x
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
mark appears to the left of the selected channels.
x
(Page): Move to next or previous page.
x
(Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons Operations
A channel selected.
A channel set as a Favorite.
A reserved Program.
Using Favorite Channels
MENU Channel Channel List ENTER
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
To show all Favorite channels, click on
the button shown on the right.
Memorizing Channels
MENU Channel ENTER
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna.
CHLIST
FAV.CH
6 Air
6-1 * TV #6
7 Air
8 Air
9 Air
9-1 * TV #9
10 Air
10-1 * TV #10
11-1 * TV #11
Air Antenna
B
Zoom Select
Page

Tools
Added Channels
6 Air
6-1 * TV #6
7 Air
8 Air
9 Air
9-1 * TV #9
10 Air
10-1 * TV #10
11-1 * TV #11
Air Antenna
B
Zoom Select
Page

Tools
Added Channels
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
[UC9000_NA]BN68-03088A-01L03.indb 16 2010-06-29 오전 10:33:03
17
English
03 Basic Features
NOTE
x
When selecting the Cable TV system: STD, HRC
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto Program
menu then reappears.
Editing Channels
MENU Channel Channel List ENTER
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features
MENU Channel ENTER
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTER
button to select Stop.
2. Press the button to select Yes.
3. Press the ENTER
button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All / Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete: Delete or add a channel to display the
channels you want.
NOTE
x
All deleted channels will be shown on the All
Channels menu.
x
A gray-colored channel indicates the channel
has been deleted.
x
The Add menu only appears for deleted
channels.
x
Delete a channel from the Added Channels or
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer
Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
If you selected Once, Every Week or EveryDay
in Repeat you can enter the date you want.
4. Select OK, then press the ENTER
button when
done.
NOTE
x
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
Programmed menu.
x
When a digital channel is selected, press the
button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here.
Highlight a program and press the TOOLS button to display
Options.
Change Info: Change a show you have reserved to
watch. Begin with step 3 of “Timer Viewing” above.
Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected
program(s).
[UC9000_NA]BN68-03088A-01L03.indb 17 2010-06-29 오전 10:33:04
18
English
Basic Features
Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
Alternatively, you can view Information by
highlighting a program and pressing the
ENTER
button.
Select All / Deselect All: Select or deselect all reserved
programs.
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
Settings are applied to the channel you're currently
watching.
Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset.
Picture Menu
Changing the Preset Picture Mode
MENU Picture Mode ENTER
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural: Suitable for reducing eye strain.
Natural is not available in PC mode.
Movie: Suitable for watching movies in a dark room.
Adjusting Picture Settings
MENU Picture ENTER
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
NOTE
x
When you make changes to Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
x
In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.
Economical Solutions
The Eco Function can be used to enhance your power
savings.
Eco Solution
MENU Picture Eco Solution ENTER
Energy Saving (Off / Low / Medium / High / Picture
Off / Auto): This adjusts the brightness of the TV in
order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except the volume button
to turn on the screen.
Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
Disabled when the PC is in power saving mode.
[UC9000_NA]BN68-03088A-01L03.indb 18 2010-06-29 오전 10:33:04
19
English
03 Basic Features
Changing the Picture Options
Advanced Settings
MENU Picture Advanced Settings
ENTER
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance, LED Motion
Plus.
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark
images.
Gamma: Adjust the primary color intensity.
Expert Pattern (Off / Pattern1 / Pattern2): By
running the Expert Pattern function, the picture can
be calibrated. If the OSD menu disappears or a menu
other than the Picture menu is opened, the calibration is
saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1: This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
After selecting Pattern1 or Pattern2, you can
adjust any of the advanced settings to the desired
effect.
While the Expert Pattern is running, sound is not
output.
Only enabled in DTV, Component and HDMI
modes.
RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
10p White Balance (Off / On): Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object
boundaries.
xvYCC (Off / On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component IN jacks.
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
LED Motion Plus (Off / On): Removes drag from fast
scenes with a lot of movement to provide a clear picture.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Shadow Detail : -2
Gamma : 0
Expert Pattern : Off
RGB Only Mode : Off
Color Space : Native
Move

Enter

Return
[UC9000_NA]BN68-03088A-01L03.indb 19 2010-06-29 오전 10:33:04
20
English
Basic Features
Picture Options
MENU Picture Picture Options ENTER
In PC mode, you can only make changes to the Color
Tone, Size and Auto Protection Time.
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the
picture to fit the entire screen.
Available with HD 1080i / 720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTER
button.
3. Press the or button to move the picture up
or down.
4. Press the ENTER
button.
5. Press the button to select Reset.
6. Press the ENTER
button to reset the picture
to its default position.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the or button to select Position.
2. Press the ENTER
button.
3. Press the , , or button to move the
picture.
4. Press the ENTER
button.
5. Press the or button to select Reset.
6. Press the ENTER
button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
PC 16:9, 4:3
P.SIZE
Picture Options
Color Tone : Normal
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Auto Motion Plus : Standard
Move

Enter

Return
[UC9000_NA]BN68-03088A-01L03.indb 20 2010-06-29 오전 10:33:04
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205

Samsung BN68-03088A-01 Manuel utilisateur

Catégorie
Téléviseurs LED
Taper
Manuel utilisateur
Ce manuel convient également à