Yamaha SRT-700 Le manuel du propriétaire

Marque: Yamaha

Modèle: SRT-700

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

TV Surround System

Système Surround TV

Owner’s Manual

Mode d’emploi

Explanation of Graphical Symbols

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

CAN ICES-3 (B)/NMB-3 (B)

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/

accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries

Association’s Consumer Electronics

Group want you to get the most out of

your equipment by playing it at a safe

level. One that lets the sound come

through loud and clear without

annoying blaring or distortion – and,

most importantly, without affecting

your sensitive hearing. Since hearing damage from loud

sounds is often undetectable until it is too late, Yamaha

and the Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid prolonged

exposure from excessive volume levels.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is intended to

alert you to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure that

may be of sufficient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended to

alert you to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

IMPORTANT

Please record the serial number of this unit in the

space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

CAUTION

RISK OF

ELECTRIC

SHOCK DO

NOT OPEN

• This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).

• Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this

device must accept any interference received including interference that may cause undesired operation.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

− Reorient or relocate the receiving antenna.

− Increase the separation between the equipment and receiver.

− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

− Consult the dealer or an experienced radio/TV technician for help.

This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC

radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment

has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).

But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s

body.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY

THIS UNIT!: This product, when installed as

indicated in the instructions contained in this

manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could

void your FCC authorization to use this product in

the USA.

3 NOTE: This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result

in harmful interference with other electronic

devices. This equipment generates/uses radio

frequencies and, if not installed and used according

to the instructions found in the users manual, may

cause interference harmful to the operation of other

electronic devices.

4 Compliance with FCC regulations does not

guarantee that interference will not occur in all

installations. If this product is found to be the source

of interference, which can be determined by turning

the unit “OFF” and “ON”, please try to eliminate the

problem by using one of the following measures:

5 Relocate either this product or the device that is

being affected by the interference.

6 Utilize power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC line

filter/s.

7 In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to coaxial type

cable.

8 If these corrective measures do not produce

satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you

can not locate the appropriate retailer, please contact

Yamaha Corporation of America A/V Division 6600

Orangethorpe Ave., Buena Park, CA 90620.

9 The above statements apply ONLY to those

products distributed by Yamaha Corporation of

America or its subsidiaries.

Explication des symboles

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la

plus large de la fiche dans la borne correspondante de la

prise et pousser jusqu’au fond.

CAN ICES-3 (B)/NMB-3 (B)

1 Lire ces instructions.

2 Conserver ces instructions.

3 Tenir compte de tous les avertissements.

4 Suivre toutes les instructions.

5 Ne pas utiliser cet appareil à proximité de l’eau.

6 Nettoyer cet appareil avec un chiffon sec seulement.

7 Ne pas recouvrir les ailettes de ventilation. Installer

l’appareil selon les instructions du fabricant.

8 Ne pas installer près d’une source de chaleur,

comme un appareil de chauffage, une résistance

électrique, un poêle, ou tout autre appareil

(amplificateurs compris) produisant de la chaleur.

9 Ne pas désamorcer le système de sécurité d’une fiche

polarisée ou d’une fiche avec mise à la terre. Une

fiche polarisée est munie de deux lames, dont l’une est

plus large que l’autre. Une fiche avec mise à la terre

est munie de deux lames et d’une broche de terre. La

lame la plus large ou la troisième broche sont reliées à

la terre pour des raisons de sécurité. Si la fiche fournie

ne s’insère pas dans la prise, s’adresser à un

électricien pour faire remplacer la prise obsolète.

10 Protéger le cordon d’alimentation de sorte qu’il ne

risque pas d’être piétiné ou coincé, surtout au niveau

des fiches, des prises et de sa sortie de l’appareil.

11 Utiliser seulement les fixations

et accessoires spécifiés par le

fabricant.

12 Utiliser seulement le chariot,

socle, trépied, support ou

meuble spécifié par le fabricant

ou vendu avec l’appareil. Si un

chariot est utilisé, faire

attention de ne pas se blesser

ou de le renverser pendant le transport de l’appareil.

13 Débrancher cet appareil pendant les orages électriques,

ou s’il ne doit pas être utilisé pendant un certain temps.

14 Pour toute inspection s’adresser à un personnel

qualifié. Une inspection est nécessaire en cas de

dommage, quel qu’il soit, par exemple cordon

d’alimentation ou fiche endommagé, liquide

répandu ou objet tombé à l’intérieur de l’appareil,

exposition de l’appareil à la pluie ou à l’humidité,

fonctionnement anormal ou chute de l’appareil.

Nous vous souhaitons un plaisir musical durable

Yamaha et le Groupe des Entreprises

Électroniques Grand Public de

l’Association des Industries Électroniques

vous demandent de tirer le meilleur parti

de votre équipement tout en écoutant à un

niveau non dommageable pour l’ouïe,

c’est-à-dire un niveau où vous pouvez

obtenir un son fort et clair, sans hurlement

ni distorsion, mais sans aucun danger pour

l’ouïe. Comme les sons trop forts causent des lésions auditives

qui ne peuvent être détectées qu’à long terme, lorsqu’il est trop

tard, Yamaha et le Groupe des Entreprises Électroniques

Grand Public de l’Association des Industries Électroniques

vous déconseillent l’écoute prolongée à des volumes excessifs.

PRÉCAUTIONS CONCERNANT LA SÉCURITÉ

ATTENTION : POUR RÉDUIRE LES RISQUES

D’INCENDIE ET DE DÉCHARGE ELECTRIQUE,

NE PAS RETIRER LE COUVERCLE (OU LE

PANNEAU ARRIÈRE). AUCUNE PIÈCE

INTERNE NE PEUT ÊTRE CHANGÉE PAR

L’UTILISATEUR. POUR L’ENTRETIEN,

S’ADRESSER À UN PERSONNEL QUALIFIÉ.

L’éclair avec une flèche à

l’intérieur d’un triangle équilatéral

est destiné à attirer l’attention de

l’utilisateur sur la présence d’une

« tension dangereuse » non isolée à

l’intérieur du produit, pouvant être

suffisamment élevée pour

constituer un risque d’électrocution.

Le point d’exclamation à

l’intérieur d’un triangle équilatéral

est destiné à attirer l’attention de

l’utilisateur sur la présence

d’instructions importantes sur

l’emploi ou de la maintenance

(réparation) de l’appareil dans la

documentation fournie.

IMPORTANT

Veuillez enregistrer le numéro de série de cet appareil

dans l’espace réservé à cet effet, ci-dessous.

MODÈLE :

No. de série :

Le numéro de série se trouve à l’arrière de l’appareil.

Prière de conserver le mode d’emploi en lieu sûr pour

toute référence future.

ATTENTION

RISQUE DE

CHOC

ÉLECTRIQUE

NE PAS

OUVRIR

• Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d’Industrie Canada applicables aux

appareils radio exempts de licence.

• Le fonctionnement est soumis aux deux conditions suivantes: 1) Cet appareil ne peut pas causer d’interférences nuisibles et

2) Cet appareil doit recevoir toutes les interférences, y compris celles pouvant entraîner des problèmes de fonctionnement.

REMARQUE

Cet appareil a été testé et il s’est avéré être conforme aux limites déterminées pour un appareil numérique de Classe B,

conformément à la partie 15 du Règlement FCC. Ces limites sont destinées à offrir une protection raisonnable contre les

interférences nuisibles pouvant survenir en cas d’utilisation de ce produit dans un environnement domestique.

Cet appareil produit, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé conformément aux

instructions, peut provoquer des interférences radio. Il n’est toutefois pas garanti qu’aucune interférence ne se produira

dans le cas d’une installation donnée. Si l’appareil provoque des interférences nuisibles à la réception de programmes

radio ou de télévision, ce qui peut être déterminé en éteignant, puis en allumant l’appareil, l’utilisateur est prié de tenter

de corriger le problème en prenant l’une ou plusieurs des mesures suivantes:

− Réorienter ou déplacer l’antenne réceptrice.

− Éloigner davantage l’appareil du récepteur.

− Raccorder l’appareil à une prise d’un circuit différent de celui du récepteur.

− Consulter le revendeur ou un technicien radio/télé expérimenté.

Cet appareil est conforme aux limites FCC/IC d’exposition aux rayonnements définies pour les appareils non

commandés et satisfait aux directives d’exposition aux fréquences radio (RF) FCC et au règlement RSS-102

d’exposition aux fréquences radio (RF) IC. Cet appareil possède des niveaux d’énergie RF très bas, considérés

conformes aux taux d’exposition maximum autorisés (MPE) non contrôlés. Mais il est toutefoispréférable d’installer et

d’utiliser l’appareil en conservant une distance minimum de 20 cm entre l’émetteur et toute personne.

Ce émetteur ne peut pas être placé à proximité de ou utilisé conjointement avec tout autre émetteur ou antenne.

Informations de la FCC (Pour les clients résidents aux États-Unis)

1 AVIS IMPORTANT: NE PAS APPORTER DE

MOFIDICATIONS À CET APPAREIL!

Ce produit est conforme aux exigences de la FCC s’il

est installé selon les instructions du mode d’emploi.

Toute modification non approuvée expressément par

Yamaha peut invalider l’autorisation, accordée par la

FCC, d’utiliser ce produit.

2 IMPORTANT: N’utiliser que des câbles blindés de

haute qualité pour le raccordement de ce produit à

des accessoires et/ou à un autre produit. Seuls le ou

les câbles fournis avec le produit DOIVENT être

utilisés. Suivre les instructions concernant

l’installation. Le non respect des instructions peut

invalider l’autorisation, accordée par la FCC,

d’utiliser ce produit aux États-Unis.

3 REMARQUE:

Ce produit a été testé et déclaré

conforme aux normes relatives aux appareils numériques

de Classe « B », telles que fixées dans l’Article 15 de la

Réglementation FCC. Ces normes sont destinées à

assurer une protection suffisante contre les interférences

nuisibles avec d’autres appareils électroniques dans une

installation résidentielle. Cet équipement génère et utilise

des fréquences radio qui, en cas d’installation et

d’utilisation non conformes aux instructions du mode

d’emploi, peuvent être à l’origine d’interférences

empêchant d’autres appareils de fonctionner.

4 Cependant, la conformité à la Réglementation FCC

ne garantit pas l’absence d’interférences dans une

installation particulière. Si ce produit devait produire

des interférences, ce qui peut être déterminé en

ÉTEIGNANT » et en

RALLUMANT » le

produit, l’utilisateur est invité à essayer de corriger

le problème d’une des manières suivantes:

5 Réorienter ce produit ou le dispositif affecté par les

interférences.

6 Utiliser des prises d’alimentation branchées sur

différents circuits (avec interrupteur de circuit ou

fusible) ou installer un ou des filtres pour ligne secteur.

7 Dans le cas d’interférences radio ou TV, changer de

place l’antenne et la réorienter. Si l’antenne est un

conducteur plat de 300 ohms, remplacer ce câble par

un câble de type coaxial.

8 Si ces mesures ne donnent pas les résultats

escomptés, prière de contacter le détaillant local

autorisé à commercialiser ce type de produit. Si ce

n’est pas possible, prière de contacter Yamaha

Corporation of America A/V Division, États-Unis,

6600 Orangethorpe Ave., Buena Park, CA 90620

9 Les déclarations précédentes NE concernent QUE

les produits commercialisés par Yamaha

Corporation of America ou ses filiales.

iii

• To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

• Install this unit in a well ventilated, cool, dry, clean

place - away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold. For proper

ventilation, allow the following minimum

clearances (excludes a TV placed on top of this

unit).

Top: 5 cm (2 in), Rear: 5 cm (2 in), Sides: 5 cm

(2 in)

• Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

• Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this

unit in an environment with high humidity (i.e. a

room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal

injury.

• Avoid installing this unit where foreign objects

may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the top

of this unit, do not place:

− Other components, as they may cause damage

and/or discoloration on the surface of this unit.

− Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

− Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

• Do not cover this unit with a newspaper,

tablecloth, curtain, etc., in order not to obstruct

heat radiation. If the temperature inside this unit

rises, it may cause fire, damage to this unit, and/or

personal injury.

• Do not plug in this unit to a wall outlet until all

connections are complete.

• Do not operate this unit upside-down. It may

overheat, possibly causing damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

• Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. Yamaha will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

• To prevent damage by lightning, keep the power

cable and outdoor antennas disconnected from a

wall outlet or the unit during a lightning storm.

• Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

• When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

• Be sure to read the “Troubleshooting” section on

common operating errors before concluding that

this unit is faulty.

• Before moving this unit, press to set this unit in

standby mode, and disconnect the power supply

cable from the wall outlet.

• Condensation will form when the surrounding

temperature changes suddenly. Disconnect the

power supply cable from the outlet, then leave the

unit alone.

• Install this unit near the wall outlet and where the

AC power plug can be reached easily.

• Secure placement or installation is the owner’s

responsibility. Yamaha shall not be liable for any

accident caused by improper placement or

installation of speakers.

Notes on remote controls and batteries

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following places:

− places of high humidity, such as near a bath

− places of high temperatures, such as near a

heater or a stove

− places of extremely low temperatures

− dusty places

• Do not expose the remote control sensor of this

unit to direct sunlight or lighting such as inverted

fluorescent lamps.

• If the batteries grow old, the effective operation

range of the remote control decreases

considerably. If this happens, replace the batteries

with two new ones as soon as possible.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read

the packaging carefully as these different types of

batteries may have the same shape and color.

• Exhausted batteries may leak. If the batteries have

leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into

contact with clothing, etc. Clean the battery

compartment thoroughly before installing new

batteries.

• Do not carry batteries in a pocket or purse with

metal objects like coins, etc.

• Do not throw away batteries with general house

waste. Dispose of them correctly in accordance

with your local regulations.

• Keep batteries away from children. If a battery is

accidentally swallowed, contact your doctor

immediately.

• When not planning to use the remote control for

long periods of time, remove the batteries from the

remote control.

• Do not charge or disassemble the supplied

batteries.

• The batteries shall not be exposed to excessive

heat such as sunshine, fire or like.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if you turn off this unit by . In this

state, this unit is designed to consume a very

small quantity of power.

(Power key)

Turns on the power of this unit or sets it to the

standby mode.

Do not use this unit within 22 cm (9 inches) of

persons with a heart pacemaker implant or

defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or

inside medical facilities.

Contents

Supplied items ..................................................................... 2

Features ................................................................................ 3

Frequently asked questions ................................................ 3

Part names and functions of the unit ................................. 4

Installations .......................................................................... 5

Connections .......................................................................... 6

Operations ............................................................................ 8

Listening to the sound from a Bluetooth device............... 10

Settings................................................................................ 12

Programming the unit with the TV’s remote control

(TV’s remote control learning function).................................................... 12

Setting the auto power standby function ............................................... 14

Initializing the unit............................................................................................ 14

Troubleshooting ................................................................. 15

Specifications...................................................................... 18

About this manual

NOTE

This indicates precautions for use of the product and its feature limitations.

HINT

This indicates supplementary explanations for better use.

Supplied items

Make sure you have received all of the following items.

Preparing the remote control

Peel off the protection sheet before use.

Operating range of the remote control

Remain within the operating range shown below.

Unit

Remote control Battery x 2

(AAA, R03, UM4)

Optical cable (1.5 m [4.9 ft])

Owner’s Manual

(This manual)

Remote control sensor

Within 6 m

(20 ft)

Features

Enjoy powerful and realistic sound from the unit. The unit is a home

theater system which can be easily installed and connected to a TV and

other devices.

Frequently asked questions

The following section covers popular functions and frequently asked questions about the

unit.

•AIR SURROUND XTREME

Enjoy 7.1 channel surround sound, which creates a wide and deep soundstage, as

if speakers are set, not only on the front, but also on the left and right, and behind

the listener (p.9).

• Bass extension

Enjoy a powerful bass sound with the Yamaha original bass boost technology

“Advanced Bass Extension Processing” (p.9).

• Bluetooth® connection

Content on a Bluetooth compatible smartphone, tablet, or computer can be played

back easily (p.10).

You can enjoy realistic and impressive sound as close to the original by the

Compressed Music Enhancer.

• HOME THEATER CONTROLLER

You can operate the unit easily by installing the dedicated controlling application

“HOME THEATER CONTROLLER.”

• TV’s remote control learning function

Operate the unit with the TV’s remote control (p.12).

•Clear voice

Makes voice sound (such as dialogues and narrations) clear (p.9).

Can I operate the unit using the remote control of the TV? Switching

between the remote controls of the TV and unit is inconvenient.

Yes. You can control the unit using your TV’s remote control by the “TV’s

remote control learning” function (p.12).

This function is available only for the IR (infrared) remote control. Check your

TV’s remote control type.

Can I improve the clarity of dialogue?

Yes. Dialogue in movies, TV news, sports programs, etc., can be made

clearer using the “clear voice” function (p.9).

Can I operate the unit using a smartphone? And, can I turn on/off the

unit with a smartphone?

Yes. You can operate the unit with your smartphone by using the dedicated

control application “HOME THEATER CONTROLLER” (p.11).

When using this function, it is necessary to connect your smartphone to the

unit through Bluetooth connection.

Also, if you use the Bluetooth standby mode function, the unit will turn on

when a Bluetooth connection is made between your smartphone and the unit,

and turns off when disconnected (p.11).

Part names and functions of the unit

Front panel

A Indicators

Indicate the status of the unit. Refer to “Operations” (p.8 to 9) for the main functions

of the indicators.

B Remote control sensor

Receives infrared signals from the remote control of the unit (p.2).

C INPUT key

Selects an input source to be played back (p.8).

D MUTE key

Mutes the audio output. Press the key again to unmute (p.9).

E VOLUME (+/–) keys

Adjust the volume (p.8).

F (power) key

Turns on or off (standby) the unit (p.9).

HINT

• The unit may automatically turn off when the auto power standby function is enabled (p.14).

G Speakers

H Dual built-in subwoofers

The built-in subwoofers are located in the bottom part of the unit.

Rear panel

I TV input jack

For connecting to a TV with an optical cable (p.6).

J BD/DVD input jack

For connecting to a playback device, such as a Blu-ray Disc (BD) player, with a

coaxial digital cable (p.7).

K ANALOG input jack

For connecting an external device with a 3.5 mm stereo mini plug cable (p.7).

Installations

Place the unit on a flat surface such as on top of a TV cabinet, and then place a TV on

top of the unit.

Obtaining better surround sound effect

For better surround sound effect, refer to the following points when installing the unit.

• Keep a distance of more than 2 meters (6.6 ft) between the unit and

listener.

• Install the unit in front of the listening position.

Cautions

• CRT TVs cannot be placed on the unit.

• If the TV base is too large to fit on top of the unit, place the unit in another location such as on an open

shelf. In that case, make sure that the shelf is well-ventilated with enough clearance around the unit to

prevent the heat from accumulating inside the unit.

• Place the unit so that it does not protrude from the TV cabinet’s edges.

• Do not place any device other than a TV on the unit. If a device such as a BD player is placed on the

unit, a malfunction due to vibrations may occur, or the TV installation may become unstable.

Furthermore, if a hard object is placed on the unit, it may cause scratches on the unit.

• Never fix the unit to a wall or other surface using a fall prevention device, such as wire or bracket,

supplied with the TV. Doing so may cause the unit fall together with the TV if an accident such as an

earthquake occurs. Read the instruction manual of your TV carefully and fix the TV to a wall or sturdy

object following the instruction.

• The unit contains non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk

drive, etc.) near the unit.

• Determine the installation location considering the connection with external devices (such as a TV).

TVs that can be placed on the unit:

– TVs weighing 30 kg (66.1 lbs) or less

– TVs with a base width 545 mm (21-1/2")

or less

– TVs with a base depth 280 mm (11") or

less

– Flat-screen TV’s with a screen size 42

inches or less

The base of a TV should be

centered on the top of the unit.

Connections

Power cable

To AC wall outlet

Unit (rear)

Optical cable

Playback device

(such as a BD player)

Set top box

OPTICAL OUTPUT

HINT

In the following cases, connect the coaxial digital

audio output of the playback device to the BD/DVD

input of the unit with a coaxial digital cable

(commercially available), then select the BD/DVD

key on the remote control for the input source.

− The TV does not have an optical output.

− The TV does not output audio (or outputs low

volume audio) from the connected playback

device.

− The audio from the playback device connected to

the TV cannot be heard as surround sound.

Connect to a TV (or other peripheral device).

HINT

• If a setting to disable the speaker output is not available on your TV, you may disable it

by connecting headphones to the headphone jack on the TV. For details, refer to the

manuals of the TV.

• The TV and BD/DVD input jacks support the following audio signals.

− PCM (2 channel)

− Dolby Digital (up to 5.1 channel)

CAUTIONS

• Do not connect the power cable of the unit to the AC wall outlet before making

connections.

• Do not use excessive force when inserting the cable plug. Doing so may damage the

cable plug or terminal.

1 Connect the TV and unit with the optical cable

(supplied).

Remove the cap of the optical cable and check the

direction of the plug.

2 Connect the power cable of the unit to an AC

wall outlet.

3 Set the TV as follows.

• Set the TV volume to minimum.

• Disable the TV built-in speaker output (if available).

HDMI cable (etc.)

Digital connection of an external device

You can connect an external device that has a coaxial digital audio output, such as a

DVD player, to the BD/DVD input jack of the unit.

NOTE

• Select the BD/DVD key on the remote control for the input source.

Analog connection of an external device (game

console)

You can connect an external device, such as a game console or TV that does not have

a digital audio output, to the ANALOG input jack of the unit.

NOTE

• Select the ANALOG key on the remote control for the input source.

• If you can adjust the volume on an external device connected to the ANALOG input jack of the unit, adjust

it to the same volume as the external device connected to the TV or BD/DVD input jack.

Coaxial digital cable

(commercially available)

Coaxial digital

audio output

(orange)

Playback device

3.5 mm stereo mini plug cable

(commercially available)

Game console (etc.)

Operations

Indicators

The indicators on the front panel flash or light up, to

indicate the operation and setting status.

In this manual, illustrations of the nine in-line indicators

are used for explanation.

: Off

: Lights up

: Flashes

(Example: When the PLII indicator and SURROUND indicator

flash, and the TV indicator lights up)

★: Keys that require pressing for more than 3 seconds

LEARN, BLUETOOTH STANDBY, AUDIO DELAY

Input keys

Select an input source to be played back.

TV ....................TV audio

BD/DVD...........Audio from a device connected to

the BD/DVD input jack

ANALOG .........Audio from a device connected to

the ANALOG input jack

BLUETOOTH

.........................Audio from a Bluetooth connected

device

The indicator for the selected input source lights up.

(Example: when TV is selected)

HINT

• To play audio of the playback device connected to the TV or

to watch videos of the playback device, set the TV’s input

source to the playback device.

• For details on Bluetooth connection, refer to “Listening to the

sound from a Bluetooth device” (p.10).

SUBWOOFER keys (+/–)

Adjust the volume of the subwoofer.

VOLUME keys (+/–)

Adjust the volume of the unit.

Volume down (–)

Volume up (+)

Volume down (–)

Volume up (+)

LEARN key

★

Sets the unit to the TV’s remote control learning

mode (p.12).

BLUETOOTH STANDBY key

★

Enables/disables the Bluetooth standby mode

(p.11).

Remote control signal transmitter

Transmits infrared signals.

★

Decoder indication

The unit supports the following audio signals. You can

check the type of the input audio signal by the color of

the indicator.

(power) key

Turns on or off (standby) the unit.

Turned on

Bluetooth standby (p.11)

Turned off

DIMMER key

Switches the brightness of the indicators. Pressing

the key each time switches the status of the

indicators as follows.

Dim (default setting) → Off → Bright

↑

Indicators illuminate bright just after the operation

and become the set brightness after a few

seconds.

Indicator of the selected input source lights up (green)

Lights up (red)

SURROUND and STEREO keys

Switch between surround and stereo

(2 channel) playback. When surround playback is

selected, you can enjoy a realistic sound effect using

Yamaha’s exclusive AIR SURROUND XTREME.

HINT

• When 2 channel stereo signals are played in surround,

the PLII indicator lights up.

• By installing the dedicated free application “HOME

THEATER CONTROLLER” to a Bluetooth device, such as a

smartphone, you can choose the following surround modes:

TV PROGRAM, MOVIE, MUSIC, SPORTS, and GAME.

Lights up (surround playback)

Off (stereo playback)

SURROUND

STEREO

Lights up (Dolby Pro Logic II)

BASS EXTENSION key

Enables/disables the bass extension function.

When this function is enabled, you can enjoy a powerful

bass sound with the Yamaha original bass boost

technology “Advanced Bass Extension Processing.”

CLEAR VOICE key

Enables/disables the clear voice function.

When this function is enabled, you can enjoy clear

voice sounds while watching movies, TV dramas,

news programs or sports programs.

AUDIO DELAY key

★

Adjusts the audio delay to synchronize the sound

with the video when the video image on the TV

may seem delayed with respect to the sound.

Follow the procedure below to adjust the audio delay.

1 Hold down the AUDIO DELAY key for more

than 3 seconds.

The left most indicator flashes.

2 Press the SUBWOOFER (+/-) key to adjust the

audio delay.

Pressing the SUBWOOFER (+) key delays the

audio output timing.

3 To finish the adjustment, press the AUDIO

DELAY key.

HINT

• The adjustment will be finished automatically if no

operations are performed for 20 seconds.

Lights up (enabled)

Off (disabled)

Lights up (enabled)

Off (disabled)

(–) (+)

MUTE key

Mutes the audio output. Press the key again

to unmute.

Flash (on mute)

Green (Dolby Digital)

Off (PCM)

Listening to the sound from a

Bluetooth device

You can play back wirelessly from Bluetooth devices, such as a smartphone or digital

music player.

See also the operating manual of the Bluetooth device for more details.

Pairing a Bluetooth device with the unit

When connecting to a Bluetooth device for the first time, “pairing” between the device

and unit is required. “Pairing” is necessary for each Bluetooth device you use.

Once “pairing” with a device is completed, subsequent connection with that device will

not require “pairing.”

1 Press the BLUETOOTH key on the unit’s remote control to select

Bluetooth as the input source.

The BLUETOOTH indicator on the front panel flashes.

2 Turn on the Bluetooth function of the device to be paired, and

perform pairing.

The operation varies depending on the device. Refer to the operation manual of the

device.

3 Select “SRT-700 Yamaha” in the Bluetooth device list on the device.

If a passkey (PIN) is required, enter the number “0000.”

When pairing is completed, or a completion message appears on the device.

NOTE

• Perform pairing with the Bluetooth device and unit within 10 meters (33 ft) of each other.

• Up to eight Bluetooth devices can be paired with the unit. If a ninth device is paired, pairing data for the

device with the oldest connection date will be deleted.

• If pairing information for a device is deleted, to use that device again, pairing of the device is required

again.

• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection (p.11), then

perform pairing with the new device.

• Refer to “Bluetooth” (p.17) in “Troubleshooting” if pairing cannot be achieved.

Perform the following steps to use a Bluetooth device with the unit.

Bluetooth devices

Playing back audio from a Bluetooth device

on the unit

For the first Bluetooth

connection

Pairing a Bluetooth device

with the unit

For subsequent

Bluetooth connection

Flashes

SRT-700 Yamaha

PIN 0 0 0 0

123

456

789

Playing back audio from a Bluetooth device on the

unit

1 With the unit turned on, press the BLUETOOTH key on the unit’s

remote control to select Bluetooth as the input source.

The BLUETOOTH indicator on the front panel flashes.

2 Turn on the Bluetooth function of the device and then connect.

When Bluetooth connection is made correctly, the BLUETOOTH indicator of the

unit lights up.

3 Play back a song on the device.

NOTE

• Perform Bluetooth connection with the device and unit within 10 meters (33 ft) of each other.

• It may be necessary to select “SRT-700 Yamaha” in the Bluetooth device list again, in the event that a

connection problem occurs. You may have to change the output setting to output audio to the unit,

depending on the Bluetooth device you are using.

• Adjust the volume level of the Bluetooth device as required.

• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection, then connect

with the new device.

Terminating Bluetooth connection

Bluetooth connection is terminated in the following cases. When the Bluetooth connection

is terminated with the unit turned on, the BLUETOOTH indicator changes from the lit

status to the flashing status and the unit enters the connection wait status.

• The Bluetooth function is turned off on the compatible device.

• The BLUETOOTH key on the unit’s remote control is pressed for more than 3

seconds.

• The unit is turned off.

Using the Bluetooth standby mode

The Bluetooth standby mode allows you to turn on (or off) the unit automatically, linked

with the operation of the Bluetooth device.

1 With the unit turned on, hold down the BLUETOOTH STANDBY key

on the unit’s remote control for more than 3 seconds.

Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the

mode between enabled and disabled.

When the Bluetooth standby mode is enabled and the unit is turned off, the

indicator lights up in red (Bluetooth standby).

Using the HOME THEATER CONTROLLER application

By installing the dedicated free application “HOME THEATER CONTROLLER” to a

Bluetooth device, such as a smartphone, you can perform various operations easily and

conveniently with the Bluetooth device. (Setting items: basic operation, surround mode,

sound adjustments)

NOTE

• To use the application, connect the unit and a Bluetooth device via Bluetooth connection.

• If you enable the Bluetooth standby mode of the unit, you can turn on the power of the unit with the

Bluetooth device.

For details on “HOME THEATER CONTROLLER”, see the product information on our

website.

Flashes

Lights up

Functions available on Bluetooth devices with Bluetooth standby mode enabled

Power on interlock function (when the unit is turned off)

When Bluetooth connection is made on the device, the unit will turn on and will be ready to play back

sound from the device.

Power off interlock function (when the unit is turned on)

The unit will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only when

BLUETOOTH is selected as the input source.)

Flash 3 times (enabled), flash once (disabled)

Lights up (red)

Settings

Once you program the unit, you can control it with your TV’s remote control for functions

such as turning on/off the TV and unit simultaneously, or volume up/down and muting/

unmuting of the unit.

1 Turn off the TV.

2 Turn off the unit.

3 Hold down the LEARN key on the unit’s remote control for more than

3 seconds to set the unit to the learning mode.

When the unit is in the learning mode, the indicators on the front panel flash as

shown below.

NOTE

• Steps 4 to 7 require only the TV’s remote control and the keys on the front panel of the unit. The

remote control of the unit is not necessary.

• If the unit has already learned functions, the following indicators light up.

Mute: TV

Volume (–): BD/DVD

Volume (+): ANALOG

Power: BLUETOOTH

4 Teach the unit the “Mute” code of the TV’s remote control.

4-1 Press MUTE on the front panel of the unit.

4-2 While pointing your TV’s remote control at the remote control sensor, hold

down the mute key for more than 1 second twice or three times.

5 Teach the unit the “Volume (–)” code of the TV’s remote control.

5-1 Press VOLUME (–) on the front panel of the unit.

5-2 While pointing your TV’s remote control at the remote control sensor, hold

down the volume (–) key for more than 1 second twice or three times.

Programming the unit with the TV’s remote control

(TV’s remote control learning function)

• This function is available only when your TV’s remote control uses IR (infrared) signal.

• A radio wave remote control will not work.

• If you want to use a cable or satellite set top box’s remote control to operate the unit, use your original

TV’s IR (infrared) remote control to program the unit, then use the set top box’s remote control to

operate.

• If by changing the volume of the unit the TV’s volume also changes, set the TV’s volume to minimum, or

disable speaker output.

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 4-1.

Twice

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 5-1.

Twice

Approx. 30 cm (1 ft)

TV’s remote control

Hold down

(more than 1 second)

Release

(more than 1 second)

Hold down

(more than 1 second)

Release

(...)

Lights up

Flash

Lights up

Flash

6 Teach the unit the “Volume (+)” code of the TV’s remote control.

6-1 Press VOLUME (+) on the front panel of the unit.

6-2 While pointing your TV’s remote control at the remote control sensor, hold

down the volume (+) key for more than 1 second twice or three times.

7 Teach the unit the “Power” code of the TV’s remote control.

7-1 Press (power) on the front panel of the unit.

7-2 While pointing your TV’s remote control at the remote control sensor, hold

down the power key for more than 1 second twice or three times.

8 To finish the learning mode, press the LEARN key on the unit’s

remote control.

This completes the necessary settings. Now you can operate the unit with the TV’s

remote control’s mute key, volume keys, or power key.

HINT

• The learning mode will be finished automatically if no operations are performed for 5 minutes.

• Set the TV volume to minimum. When you turn up the volume of the unit with the TV’s remote

control, the volume of the TV may be turned up at the same time. In this case, follow Step 3 in

“Connections” (p.6) to change the TV setting.

• You can press the (power) key on the unit’s remote control to finish learning mode.

Clearing all programmed functions

1 With the unit turned off, hold down the LEARN key on the unit’s

remote control for more than 3 seconds (for entering the learning

mode).

When the unit is in the learning mode, the indicators on the front panel flash as

shown below.

2 Hold down INPUT on the front panel of the unit for more than 3

seconds.

The corresponding indicator of the learned function turns off and the indicators on

the front panel flash as shown below.

If the clearing is completed, you will hear the bleep sound three times.

3 Press the LEARN key on the unit’s remote control.

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 6-1.

Twice

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 7-1.

Twice

Lights up

Flash

Lights up

Flash

By enabling the auto power standby function, you can avoid forgetting to turn off the unit

after use, or if you fall asleep while watching TV.

NOTE

• When the auto power standby function is enabled and one of the following conditions is met, the unit will

automatically turn off.

− No operations for 8 hours

− No audio input and no operations for 20 minutes when BLUETOOTH is selected as the input source.

1 With the unit turned off, hold down the MUTE key on the unit’s

remote control for more than 3 seconds to enable/disable the auto

power standby function.

You can check the status of the auto power standby function with the indicators on

the front panel for several seconds right after the unit is turned on.

HINT

• Initial setting varies depending on the country or region.

− U.K. and Europe models: enabled

− Other models: disabled

Follow the procedure below to initialize the unit.

1 Turn off the unit.

2 Hold down (power) on the front panel of the unit for more than 3

seconds.

Setting the auto power standby function

Off (enabled), lights up (disabled)

Initializing the unit

Flash (initialized)

Troubleshooting

Refer to the table below when the unit does not function properly. If the problem you are

experiencing is not listed below or if the instructions below do not help, turn off the unit,

disconnect the power cable, and contact the nearest authorized Yamaha dealer or

service center.

First, check the following:

A The power cables of the unit, TV and playback devices (such as BD players)

are connected to AC wall outlets securely.

B The unit, TV and playback devices (such as BD players) are turned on.

C The connectors of each cable are securely inserted into jacks on each device.

Power and system

Audio

Problem Cause Remedy

The power turns

off suddenly.

The auto power standby function

worked.

When the auto power standby

function is enabled and one of the

following conditions is met, the

unit will automatically turn off.

- No operations for 8 hours

- No audio input and no

operations for 20 minutes when

BLUETOOTH is selected as the

input source.

Turn on the unit again. To stop the unit

from turning off automatically, disable

the auto power standby function

(p.14).

The protection circuitry has been

activated. (The D indicator on

the front panel of the unit flashes.)

After confirming that all connections

are made properly, turn on the unit

again. If the power often suddenly

turns off, unplug the power cable from

the AC wall outlet and contact the

nearest authorized Yamaha dealer or

service center.

Bluetooth connection is

terminated on a Bluetooth device

when the Bluetooth standby mode

is enabled.

Disable the Bluetooth standby mode

(p.11).

The power

cannot be turned

on.

The protection circuitry has been

activated three times

consecutively. (If you try to turn on

the power in this condition, the

D indicator on the front panel of

the unit flashes.)

To protect the product, the power

cannot be turned on. Unplug the

power cable from the AC wall outlet

and contact the nearest authorized

Yamaha dealer or service center.

All indicators go

out although the

unit is turned on

(it may seem that

the unit is turned

off).

The brightness of indicators is set

to off on the DIMMER key setting.

Operate the DIMMER key to select the

desired brightness (p.9).

The unit is not

responding

correctly.

The internal microcomputer is

frozen, due to an external electric

shock (such as lightning or

excessive static electricity) or to a

drop in the power supply voltage.

Hold down (power) on the front

panel of the unit for more than 10

seconds to reboot it. (If the problem

persists, unplug the power cable from

the AC wall outlet and plug it again.)

The unit

operates by

itself.

Another Bluetooth device is being

operated nearby.

Terminate Bluetooth connection of the

unit (p.11).

The unit cannot

be operated

using the

dedicated

application

“HOME

THEATER

CONTROLLER.”

(The screen of

the application

does not shift

from the demo

mode.)

The Bluetooth device on which

the application has been installed

is not connected to the unit.

Connect the Bluetooth device and the

unit via Bluetooth and use the

application.

Problem Cause Remedy

No sound.

Another input source is selected. Select an appropriate input source

(p.8).

The mute function is activated. Cancel the mute function (p.9).

The volume is too low. Turn up the volume (p.8).

The power cable of the unit is not

connected properly.

Make sure that the power cable of the

unit is connected to an AC wall outlet

securely (p.6).

Input jacks on both devices are

connected.

Connect the input jack on the unit and

the output jack on the external

playback device.

Signals that the unit cannot play

back are being input.

Change the digital audio output setting

on the playback device to PCM or

Dolby Digital.

Remote control

No sound is

coming from the

subwoofer.

The volume of the subwoofer is

too low.

Turn up the volume of the subwoofer

(p.8).

The playback source does not

contain low-frequency signals.

Play back a sound source containing

low-frequency signals, and confirm

that the sound is output from the

subwoofer.

The volume

decreases when

the unit is turned

on.

The automatic volume adjustment

function worked. To prevent

excessive loudness, the unit

automatically controls its volume

within a certain level when the unit

is turned on.

If necessary, turn up the volume (p.8).

No surround

effect.

Stereo playback is selected. Select surround playback (p.9).

The volume is too low. Turn up the volume (p.8).

The TV or playback device is set

to output 2 channel audio (such

as PCM) only.

Change the digital audio output setting

on the TV or playback device to Dolby

Digital or BitStream.

The audio is output from the TV

built-in speakers.

Set the TV volume to minimum (p.6).

The listening position is too close

to the unit.

Listen from a position at some

distance from the unit.

Noise is heard.

The unit is too close to another

digital or high-frequency device.

Move those devices away from the

unit.

Problem Cause Remedy

The unit cannot

be controlled

using the remote

control.

The unit is out of the operating

range.

Use the remote control within the

operating range (p.2).

The batteries are weak. Replace with new batteries (p.2).

The remote control sensor of the

unit is exposed to direct sunlight

or strong lighting.

Adjust the lighting angle, or reposition

the unit.

The unit does

not learn TV’s

remote control

operations.

The TV’s remote control key was

not held down long enough.

Hold down the key for more than 1

second twice or three times (p.12).

The TV’s remote control does not

use infrared signals. (Some

remote controls may not work

even if it uses infrared signals.)

The TV’s remote control learning

function cannot be used in this case.

Use the unit’s remote control to

operate the unit.

The position where you operated

the TV’s remote control is not

appropriate.

Operate the TV’s remote control at the

appropriate position (p.12).

The batteries of the TV’s remote

control are weak.

Replace with new batteries.

The remote control sensor of the

unit is exposed to direct sunlight

or strong lighting.

Adjust the lighting angle, or reposition

the unit.

The transmission of the remote

control signal was disturbed by

the TV screen light.

Turn off the TV and perform the

learning operation again (p.12).

Sound is coming

from the TV

when the unit

volume is turned

up with the TV’s

remote control.

(when TV’s

remote control

learning function

is used)

Audio output is enabled on the

TV.

Change the TV setting to disable the

TV speaker output. If a setting to

disable the speaker output is not

available on your TV, try the following

methods.

- Connect headphones to the

headphone jack on the TV.

- Set the TV volume to minimum.

The power of the

unit and of the

TV switch in the

opposite

direction. (For

example, the TV

is turned off if

the unit is turned

on.)

(when TV’s

remote control

learning function

is used)

The power of the TV was on when

you performed the learning

operation.

Press the power key on the TV and

(power) on the front panel of the unit to

turn them on and then press the power

key on the TV’s remote control to turn

them off.

La page est en cours de chargement...

Yamaha SRT-700 Le manuel du propriétaire

Marque: Yamaha

Modèle: SRT-700

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Yamaha SRT-700 Owner's manual

Yamaha SRT-700 Le manuel du propriétaire

Yamaha SRT-700 Le manuel du propriétaire

dans d''autres langues

Documents connexes