Yamaha SRT-1000 Le manuel du propriétaire

Marque: Yamaha

Modèle: SRT-1000

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

TV Surround System

Système Surround TV

Owner’s Manual

Mode d’emploi

Explanation of Graphical Symbols

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

CAN ICES-3 (B)/NMB-3 (B)

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/

accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries

Association’s Consumer Electronics

Group want you to get the most out of

your equipment by playing it at a safe

level. One that lets the sound come

through loud and clear without

annoying blaring or distortion – and,

most importantly, without affecting

your sensitive hearing. Since hearing damage from loud

sounds is often undetectable until it is too late, Yamaha

and the Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid prolonged

exposure from excessive volume levels.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is intended to

alert you to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure that

may be of sufficient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended to

alert you to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

IMPORTANT

Please record the serial number of this unit in the

space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

CAUTION

RISK OF

ELECTRIC

SHOCK DO

NOT OPEN

• This device complies with Part 15 of the FCC Rules and RSSGen of IC Rules.

• Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this

device must accept any interference received including interference that may cause undesired operation.

See the “Troubleshooting” section at the end of this manual if interference to radio reception is suspected.

FCC WARNING

Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

− Reorient or relocate the receiving antenna.

− Increase the separation between the equipment and receiver.

− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

− Consult the dealer or an experienced radio/TV technician for help.

This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC

radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment

has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).

But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s

body.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY

THIS UNIT!: This product, when installed as

indicated in the instructions contained in this

manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could

void your FCC authorization to use this product in

the USA.

3 NOTE: This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result

in harmful interference with other electronic

devices. This equipment generates/uses radio

frequencies and, if not installed and used according

to the instructions found in the users manual, may

cause interference harmful to the operation of other

electronic devices.

4 Compliance with FCC regulations does not

guarantee that interference will not occur in all

installations. If this product is found to be the source

of interference, which can be determined by turning

the unit “OFF” and “ON”, please try to eliminate the

problem by using one of the following measures:

5 Relocate either this product or the device that is

being affected by the interference.

6 Utilize power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC line

filter/s.

7 In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to coaxial type

cable.

8 If these corrective measures do not produce

satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you

can not locate the appropriate retailer, please contact

Yamaha Corporation of America A/V Division 6600

Orangethorpe Ave., Buena Park, CA 90620.

9 The above statements apply ONLY to those

products distributed by Yamaha Corporation of

America or its subsidiaries.

Explication des symboles

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la

plus large de la fiche dans la borne correspondante de la

prise et pousser jusqu’au fond.

CAN ICES-3 (B)/NMB-3 (B)

1 Lire ces instructions.

2 Conserver ces instructions.

3 Tenir compte de tous les avertissements.

4 Suivre toutes les instructions.

5 Ne pas utiliser cet appareil à proximité de l’eau.

6 Nettoyer cet appareil avec un chiffon sec seulement.

7 Ne pas recouvrir les ailettes de ventilation. Installer

l’appareil selon les instructions du fabricant.

8 Ne pas installer près d’une source de chaleur,

comme un appareil de chauffage, une résistance

électrique, un poêle, ou tout autre appareil

(amplificateurs compris) produisant de la chaleur.

9 Ne pas désamorcer le système de sécurité d’une fiche

polarisée ou d’une fiche avec mise à la terre. Une

fiche polarisée est munie de deux lames, dont l’une est

plus large que l’autre. Une fiche avec mise à la terre

est munie de deux lames et d’une broche de terre. La

lame la plus large ou la troisième broche sont reliées à

la terre pour des raisons de sécurité. Si la fiche fournie

ne s’insère pas dans la prise, s’adresser à un

électricien pour faire remplacer la prise obsolète.

10 Protéger le cordon d’alimentation de sorte qu’il ne

risque pas d’être piétiné ou coincé, surtout au niveau

des fiches, des prises et de sa sortie de l’appareil.

11 Utiliser seulement les fixations

et accessoires spécifiés par le

fabricant.

12 Utiliser seulement le chariot,

socle, trépied, support ou

meuble spécifié par le fabricant

ou vendu avec l’appareil. Si un

chariot est utilisé, faire

attention de ne pas se blesser

ou de le renverser pendant le transport de l’appareil.

13 Débrancher cet appareil pendant les orages électriques,

ou s’il ne doit pas être utilisé pendant un certain temps.

14 Pour toute inspection s’adresser à un personnel

qualifié. Une inspection est nécessaire en cas de

dommage, quel qu’il soit, par exemple cordon

d’alimentation ou fiche endommagé, liquide

répandu ou objet tombé à l’intérieur de l’appareil,

exposition de l’appareil à la pluie ou à l’humidité,

fonctionnement anormal ou chute de l’appareil.

Nous vous souhaitons un plaisir musical durable

Yamaha et le Groupe des Entreprises

Électroniques Grand Public de

l’Association des Industries Électroniques

vous demandent de tirer le meilleur parti

de votre équipement tout en écoutant à un

niveau non dommageable pour l’ouïe,

c’est-à-dire un niveau où vous pouvez

obtenir un son fort et clair, sans hurlement

ni distorsion, mais sans aucun danger pour

l’ouïe. Comme les sons trop forts causent des lésions auditives

qui ne peuvent être détectées qu’à long terme, lorsqu’il est trop

tard, Yamaha et le Groupe des Entreprises Électroniques

Grand Public de l’Association des Industries Électroniques

vous déconseillent l’écoute prolongée à des volumes excessifs.

PRÉCAUTIONS CONCERNANT LA SÉCURITÉ

ATTENTION : POUR RÉDUIRE LES RISQUES

D’INCENDIE ET DE DÉCHARGE ELECTRIQUE,

NE PAS RETIRER LE COUVERCLE (OU LE

PANNEAU ARRIÈRE). AUCUNE PIÈCE

INTERNE NE PEUT ÊTRE CHANGÉE PAR

L’UTILISATEUR. POUR L’ENTRETIEN,

S’ADRESSER À UN PERSONNEL QUALIFIÉ.

L’éclair avec une flèche à

l’intérieur d’un triangle équilatéral

est destiné à attirer l’attention de

l’utilisateur sur la présence d’une

« tension dangereuse » non isolée à

l’intérieur du produit, pouvant être

suffisamment élevée pour

constituer un risque d’électrocution.

Le point d’exclamation à

l’intérieur d’un triangle équilatéral

est destiné à attirer l’attention de

l’utilisateur sur la présence

d’instructions importantes sur

l’emploi ou de la maintenance

(réparation) de l’appareil dans la

documentation fournie.

IMPORTANT

Veuillez enregistrer le numéro de série de cet appareil

dans l’espace réservé à cet effet, ci-dessous.

MODÈLE :

No. de série :

Le numéro de série se trouve à l’arrière de l’appareil.

Prière de conserver le mode d’emploi en lieu sûr pour

toute référence future.

ATTENTION

RISQUE DE

CHOC

ÉLECTRIQUE

NE PAS

OUVRIR

• Cet appareil est conforme à la Partie 15 du Règlement FCC et au RSS-Gen du Règlement IC.

• Le fonctionnement est soumis aux deux conditions suivantes: 1) Cet appareil ne peut pas causer d’interférences nuisibles et

2) Cet appareil doit recevoir toutes les interférences, y compris celles pouvant entraîner des problèmes de fonctionnement.

Consultez le mode d’emploi si vous soupçonnez que la réception radio subit des interférences.

AVERTISSEMENT FCC

Tout changement apporté sans l’approbation expresse du fabricant pourrait entraîner l’annulation du droit d’utilisation de l’appareil.

REMARQUE

Cet appareil a été testé et il s’est avéré être conforme aux limites déterminées pour un appareil numérique de Classe B,

conformément à la partie 15 du Règlement FCC. Ces limites sont destinées à offrir une protection raisonnable contre les

interférences nuisibles pouvant survenir en cas d’utilisation de ce produit dans un environnement domestique.

Cet appareil produit, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé conformément aux

instructions, peut provoquer des interférences radio. Il n’est toutefois pas garanti qu’aucune interférence ne se produira

dans le cas d’une installation donnée. Si l’appareil provoque des interférences nuisibles à la réception de programmes

radio ou de télévision, ce qui peut être déterminé en éteignant, puis en allumant l’appareil, l’utilisateur est prié de tenter

de corriger le problème en prenant l’une ou plusieurs des mesures suivantes:

− Réorienter ou déplacer l’antenne réceptrice.

− Éloigner davantage l’appareil du récepteur.

− Raccorder l’appareil à une prise d’un circuit différent de celui du récepteur.

− Consulter le revendeur ou un technicien radio/télé expérimenté.

Cet appareil est conforme aux limites FCC/IC d’exposition aux rayonnements définies pour les appareils non

commandés et satisfait aux directives d’exposition aux fréquences radio (RF) FCC et au règlement RSS-102

d’exposition aux fréquences radio (RF) IC. Cet appareil possède des niveaux d’énergie RF très bas, considérés

conformes aux taux d’exposition maximum autorisés (MPE) non contrôlés. Mais il est toutefoispréférable d’installer et

d’utiliser l’appareil en conservant une distance minimum de 20 cm entre l’émetteur et toute personne.

Ce émetteur ne peut pas être placé à proximité de ou utilisé conjointement avec tout autre émetteur ou antenne.

Informations de la FCC (Pour les clients résidents aux États-Unis)

1 AVIS IMPORTANT: NE PAS APPORTER DE

MOFIDICATIONS À CET APPAREIL!

Ce produit est conforme aux exigences de la FCC s’il

est installé selon les instructions du mode d’emploi.

Toute modification non approuvée expressément par

Yamaha peut invalider l’autorisation, accordée par la

FCC, d’utiliser ce produit.

2 IMPORTANT: N’utiliser que des câbles blindés de

haute qualité pour le raccordement de ce produit à

des accessoires et/ou à un autre produit. Seuls le ou

les câbles fournis avec le produit DOIVENT être

utilisés. Suivre les instructions concernant

l’installation. Le non respect des instructions peut

invalider l’autorisation, accordée par la FCC,

d’utiliser ce produit aux États-Unis.

3 REMARQUE:

Ce produit a été testé et déclaré

conforme aux normes relatives aux appareils numériques

de Classe « B », telles que fixées dans l’Article 15 de la

Réglementation FCC. Ces normes sont destinées à

assurer une protection suffisante contre les interférences

nuisibles avec d’autres appareils électroniques dans une

installation résidentielle. Cet équipement génère et utilise

des fréquences radio qui, en cas d’installation et

d’utilisation non conformes aux instructions du mode

d’emploi, peuvent être à l’origine d’interférences

empêchant d’autres appareils de fonctionner.

4 Cependant, la conformité à la Réglementation FCC

ne garantit pas l’absence d’interférences dans une

installation particulière. Si ce produit devait produire

des interférences, ce qui peut être déterminé en

ÉTEIGNANT » et en

RALLUMANT » le

produit, l’utilisateur est invité à essayer de corriger

le problème d’une des manières suivantes:

5 Réorienter ce produit ou le dispositif affecté par les

interférences.

6 Utiliser des prises d’alimentation branchées sur

différents circuits (avec interrupteur de circuit ou

fusible) ou installer un ou des filtres pour ligne secteur.

7 Dans le cas d’interférences radio ou TV, changer de

place l’antenne et la réorienter. Si l’antenne est un

conducteur plat de 300 ohms, remplacer ce câble par

un câble de type coaxial.

8 Si ces mesures ne donnent pas les résultats

escomptés, prière de contacter le détaillant local

autorisé à commercialiser ce type de produit. Si ce

n’est pas possible, prière de contacter Yamaha

Corporation of America A/V Division, États-Unis,

6600 Orangethorpe Ave., Buena Park, CA 90620

9 Les déclarations précédentes NE concernent QUE

les produits commercialisés par Yamaha

Corporation of America ou ses filiales.

iii

• To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

• Install this unit in a well ventilated, cool, dry, clean

place - away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold. For proper

ventilation, allow the following minimum

clearances (excludes a TV placed on top of this

unit).

Top: 5 cm (2 in), Rear: 5 cm (2 in), Sides: 5 cm

(2 in)

• Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

• Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this

unit in an environment with high humidity (i.e. a

room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal

injury.

• Avoid installing this unit where foreign objects

may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the top

of this unit, do not place:

− Other components, as they may cause damage

and/or discoloration on the surface of this unit.

− Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

− Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

• Do not cover this unit with a newspaper,

tablecloth, curtain, etc., in order not to obstruct

heat radiation. If the temperature inside this unit

rises, it may cause fire, damage to this unit, and/or

personal injury.

• Do not plug in this unit to a wall outlet until all

connections are complete.

• Do not operate this unit upside-down. It may

overheat, possibly causing damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

• Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. Yamaha will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

• To prevent damage by lightning, keep the power

cable and outdoor antennas disconnected from a

wall outlet or the unit during a lightning storm.

• Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

• When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

• Be sure to read the “Troubleshooting” section on

common operating errors before concluding that

this unit is faulty.

• Before moving this unit, press to set this unit in

standby mode, and disconnect the power supply

cable from the wall outlet.

• Condensation will form when the surrounding

temperature changes suddenly. Disconnect the

power supply cable from the outlet, then leave the

unit alone.

• Install this unit near the wall outlet and where the

AC power plug can be reached easily.

• The batteries shall not be exposed to excessive

heat such as sunshine, fire or like.

• Secure placement or installation is the owner’s

responsibility. Yamaha shall not be liable for any

accident caused by improper placement or

installation of speakers.

Notes on remote controls and batteries

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following places:

− places of high humidity, such as near a bath

− places of high temperatures, such as near a

heater or a stove

− places of extremely low temperatures

− dusty places

• Do not expose the remote control sensor of this

unit to direct sunlight or lighting such as inverted

fluorescent lamps.

• If the batteries grow old, the effective operation

range of the remote control decreases

considerably. If this happens, replace the batteries

with two new ones as soon as possible.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read

the packaging carefully as these different types of

batteries may have the same shape and color.

• Exhausted batteries may leak. If the batteries have

leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into

contact with clothing, etc. Clean the battery

compartment thoroughly before installing new

batteries.

• Do not carry batteries in a pocket or purse with

metal objects like coins, etc.

• Do not throw away batteries with general house

waste. Dispose of them correctly in accordance

with your local regulations.

• Keep batteries away from children. If a battery is

accidentally swallowed, contact your doctor

immediately.

• When not planning to use the remote control for

long periods of time, remove the batteries from the

remote control.

• Do not charge or disassemble the supplied

batteries.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if you turn off this unit by . In this

state, this unit is designed to consume a very

small quantity of power.

(Power key)

Turns on the power of this unit or sets it to the

standby mode.

Do not use this unit within 22 cm (9 inches) of

persons with a heart pacemaker implant or

defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or

inside medical facilities.

Contents

Supplied items .......................................................................2

Features..................................................................................3

Frequently asked questions..................................................3

Part names and functions of the unit...................................4

Connections ...........................................................................5

Analog connection of an external device (game console) ....................6

Digital connection of an external device .....................................................6

Installations............................................................................7

Operations..............................................................................8

Setting a surround sound effect for the installation position (SRT

position) ................................................................................................................ 10

Selecting a surround sound effect of your choice................................. 10

Adjusting the volume level of each channel (CH LEVEL)..................... 11

Listening to the sound from a Bluetooth device .............. 12

Settings................................................................................ 14

Programming the unit with the TV’s remote control (TV’s remote

control learning function)............................................................................... 14

Using an external subwoofer......................................................................... 16

Making sound easy to listen at low volume............................................. 16

Setting the auto power standby function ................................................ 17

Initializing the settings of the unit............................................................... 17

Troubleshooting ................................................................. 18

Specifications...................................................................... 22

About this manual

• This manual explains operations using the supplied remote control.

• Marks used in this manual

NOTE

This indicates precautions for use of the product and its feature limitations.

HINT

This indicates supplementary explanations for better use.

Supplied items

Make sure you have received all of the following items.

How to use the remote control

Preparing the remote control

Peel off the protection sheet before use.

Operating range of the remote control

Remain within the operating range shown below.

Unit

Remote control Battery x 2

(AAA, R03, UM4)

Optical cable (1.5 m [4.9 ft])

Owner’s Manual

(This manual)

Within 6 m

(20 ft)

Features

Enjoy powerful and realistic sound from the unit. The unit is a home

theater system which can be easily installed and connected to a TV and

other devices.

Frequently asked questions

The following section covers popular functions and frequently asked questions about the

unit.

• Digital sound projection

Integrated multiple small speakers optimize the individual sound beams. The

surround sound effect is enhanced by reflecting the beams onto the walls of the

room (p.10).

• Surround mode

Enjoy realistic surround sound. Select one of the five surround modes (movie,

music, sports, game, TV program) for the source to be played back (p.10).

•Clear voice

Make voice sound (such as dialogues and narrations) clear with just one touch

(p.9).

•UniVolume

Maintains consistent sound volume when inputs or sound sources switch (p.9).

• Bluetoo th® connection

Play back sound from a connected Bluetooth device (p.12).

You can enjoy deep and fresh sound as close to the original by the Compressed

Music Enhancer. This unit is also compliant with the aptX codec, which enables

you to enjoy better sound from your smartphone.

• HOME THEATER CONTROLLER

You can operate the unit easily by installing the dedicated controlling application

“HOME THEATER CONTROLLER.”

• TV remote control learning function

Operate the unit with the TV’s remote control (p.14).

What size TVs can I place on the unit?

Flat screen TVs that weigh no more than 40 kg (88.1 lbs), have bases no

wider than 750 mm (29-1/2") and no deeper than 340 mm (13-3/8"), and have

screens no larger than 55 inches can be placed on the unit.

Can I operate the unit using the remote control of the TV?

Switching between the remote controls of the TV and unit is

inconvenient.

Yes. You can control the unit using your TV’s remote control by the “TV’s

remote control learning” function (p.14).

This function is available only for the IR (infrared) remote control. Check your

TV’s remote control type.

Can I make voice sound more clearly?

Yes. Dialogue in movies, TV news or sports programs, etc., can be made

clearer using the “clear voice” function (p.9).

Part names and functions of the unit

Front panel

A Indicators

Indicate the status of the unit. The indicators will dim automatically if no operations

are performed for 5 seconds.

Refer to “Operations” (p.8 to 9) for the main functions of the indicators.

B Remote control sensor

Receives infrared signals from the remote control of the unit (p.2).

C INPUT key

Selects an input source to be played back (p.8).

D MUTE key

Mutes the audio output. Press the key again to unmute (p.8).

E VOLUME (+/–) keys

Adjust the volume (p.8).

F (power) key

Turns on or off (standby) the unit (p.9).

G Dual built-in subwoofers

The built-in subwoofers are located in the bottom part of the unit.

HINT

• The unit may automatically turn off when the auto power standby function is enabled (p.17).

Rear panel

Overhead view

A SUBWOOFER OUT jack

For connecting an external subwoofer with a monaural pin cable (p.16).

B ANALOG input jacks

For connecting an external device with an RCA stereo cable (p.6).

C COAXIAL input jack

For connecting an external device with a coaxial digital cable (p.6).

D BD/DVD input jack

For connecting a playback device, such as a Blu-ray Disc (BD) player, with an optical

cable (p.5).

E TV input jack

For connecting a TV with an optical cable (p.5).

Connections

Power cable

Unit (rear)

Overhead view

Optical cable

Optical cable (commercially available)

Playback device (such as a BD player)

Set top box

OPTICAL OUTPUT

HINT

In the following cases, connect

the optical output of the

playback device to the BD/DVD

input of the unit with an optical

cable (commercially available),

then select the BD/DVD key on

the remote control for the input

source.

• The TV does not have an

optical output.

• The TV does not output audio

(or outputs low volume audio)

from the connected playback

device.

• The audio from the playback

device connected to the TV

cannot be heard as surround

sound.

Connect to a TV (or other peripheral device).

HINT

• If a setting to disable the speaker output is not available on your TV, you may disable it

by connecting headphones to the headphone jack on the TV. For details, refer to the

manuals of the TV.

• The TV, BD/DVD and COAXIAL input jacks support the following audio signals.

− PCM (2ch)

− Dolby Digital (up to 5.1 channels)

− DTS Digital Surround (up to 5.1 channels)

Cautions

• Do not connect the power cable of the unit to the AC wall outlet before making

connections.

• Do not use excessive force when inserting the cable plug. Doing so may damage the

cable plug or terminal.

1 Remove the jack cover on the top panel of the

unit.

2 Connect the TV and unit with the optical cable

(supplied).

Remove the cap of the optical cable and check the

direction of the plug.

3 Connect the power cable of the unit to an AC

wall outlet.

4 Set the TV as follows.

• Set the TV volume to minimum.

• Disable the TV built-in speaker output (if available).

5 Attach the jack cover.

HDMI cable (etc.)

To AC wall outlet

Jack cover

You can connect an external device, such as a game console or TV that does not have

an optical output, to the ANALOG input jacks of the unit.

NOTE

• Make sure the left (L) and right (R) channels are connected correctly.

• Select the ANALOG key on the remote control for the input source.

You can connect an external device that has a coaxial digital audio output, such as a

DVD player, to the COAXIAL input jack of the unit.

NOTE

• Select the COAXIAL key on the remote control for the input source.

Analog connection of an external device (game

console)

RCA stereo cable (etc.)

(commercially available)

Unit (rear)

Overhead view

Game console (etc.)

Digital connection of an external device

Coaxial digital cable

(commercially available)

Coaxial digital

audio output

(orange)

Unit (rear)

Overhead view

Installations

Place the unit on a flat surface such as on top of a TV

cabinet, and then place a TV on top of the unit.

Obtaining effective surround sound

effect

To obtain effective surround sound effect, observe the

following.

• Keep a distance of more than 2 meters (6.6 ft) between the unit

and listener.

• Install the unit in front of the listening position.

• If the sound beams are blocked by obstacles such as furniture,

adjust the position of the unit or the obstacles.

Optimizing the surround sound effect for

the installation position

The unit achieves surround sound by reflecting sound

beams off walls. The optimum surround sound effect is

achieved by setting an SRT position according to the

installation position of the unit. After turning on the unit,

hold down the SRT POSITION key that corresponds to

the installation position for more than 3 seconds.

For details, refer to “Setting a surround sound effect for

the installation position (SRT position)” (p.10).

Cautions

• TVs that can be placed on the unit are flat-screen TVs that weigh

no more than 40 kg (88.1 lbs), have bases no wider than 750 mm

(29-1/2") and no deeper than 340 mm (13-3/8"), and have

screens no larger than 55 inches. CRT TVs cannot be placed on

the unit.

• Place the TV so that its base does not protrude from the unit’s

edges. If the TV base is too large to fit on top of the unit, place

the unit in another location such as on an open shelf. In that

case, make sure that the shelf is well-ventilated with enough

clearance around the unit to prevent the heat from accumulating

inside the unit.

• Place the unit so that it does not protrude from the TV cabinet’s

edges.

• Do not place any device other than a TV on the unit. If a device

such as a BD player is placed on the unit, a malfunction due to

vibrations may occur, or the TV installation may become

unstable. Furthermore, if a hard object is placed on the unit, it

may cause scratches on the unit.

• Never fix the unit to a wall or other surface using a fall prevention

device, such as wire or bracket, supplied with the TV. Doing so

may cause the unit fall together with the TV if an accident such

as an earthquake occurs. Read the instruction manual of your TV

carefully and fix the TV to a wall or sturdy object following the

instruction.

• The unit contains non-magnetic shielding speakers. Do not place

magnetically sensitive items (hard disk drive, etc.) near the unit.

• Determine the installation location considering the connection

with external devices (such as a TV).

Cautions

Effective surround effect may not be achieved in the following

environment.

• Sound beams are blocked by obstacles such as furniture.

• The room size is not within the following dimensions;

Width: 3 meters to 7 meters (9.8 ft to 23 ft)

Depth: 3 meters to 7 meters (9.8 ft to 23 ft)

Height: 2 meters to 3.5 meters (6.6 ft to 11.5 ft)

• Listening position is too close to the unit.

• The unit is installed too close to the left or right wall.

• The unit is installed in the corner of the room.

• There is no wall for reflecting sound beam on the path of the

sound beams.

Operations

Indicators

The indicators on the front panel flash or light up, to

indicate the operation and setting status.

In this manual, illustrations of the nine in-line indicators

are used for explanation.

: Off

: Lights up

: Flashes

(Example: When the STATUS indicator flashes and the TV indicator

lights up)

Input keys

Select an input source to be played back.

The indicator for the selected input source lights up.

(Example: when TV is selected)

TV ....................TV audio

BD/DVD...........Audio from a device connected to

the BD/DVD input jack

COAXIAL.........Audio from a device connected to

the COAXIAL input jack

ANALOG .........Audio from a device connected to

the ANALOG input jack

BLUETOOTH ...Audio from a Bluetooth connected

device

HINT

• To play audio of the playback device connected to the TV or

to watch videos of the playback device, set the TV’s input

source to the playback device.

• For details on Bluetooth connection, refer to “Listening to the

sound from a Bluetooth device” (p.12).

SUBWOOFER keys (+/–)

Adjust the volume of the subwoofer.

VOLUME keys (+/–)

Adjust the volume of the unit.

MUTE key

Mutes the audio output. Press the key again to unmute.

Volume down (–) Volume up (+)

Flash (on mute)

Remote control

signal transmitter

Transmits infrared signals.

★

★: Keys that require pressing for more than 3 seconds

BLUETOOTH STANDBY, AUDIO DELAY, SRT POSITION (L, C,

R), CH LEVEL, LEARN

CH LEVEL key

★

While you listen to the test-tone, you can adjust

the volume level of each channel (p.11).

Decoder indication

The unit supports the following audio signals. You can

check the type of the input audio signal by the color of

the indicator.

(power) key

Turns on or off (standby) the unit.

BLUETOOTH STANDBY key

★

Enables/disables the Bluetooth standby mode

(p.13).

Green (turned on)

Red (Bluetooth standby) (p.13)

Off (turned off)

Surround mode / STEREO keys

Choose from five different types of surround

playback (surround mode keys), or stereo (2-

channel) playback. When the surround playback is

selected, the sound field program “CINEMA DSP”

provides realistic surround effects (p.10).

HINT

• When 2-channel stereo signals are played in surround with

Dolby Pro Logic II, the PLII indicator lights up.

Lights up (surround playback)

Off (stereo playback)

MOVIE / MUSIC /

SPORTS / GAME /

TV PROGRAM

STEREO

Lights up (Dolby Pro Logic II)

LEARN key

★

Sets the unit to the TV remote control learning

mode (p.14).

CLEAR VOICE key

Enables/disables the clear voice function.

When this function is enabled, you can enjoy clear

voice sounds while watching movies, TV dramas,

news programs or sports programs.

UNIVOLUME key

Enables/disables the UniVolume function.

When this function is enabled, consistent volume is

maintained when inputs or sound sources switch.

AUDIO DELAY key

★

Adjusts the audio delay to synchronize the sound

with the video when the video image on the TV

may seem delayed with respect to the sound.

Follow the procedure below to adjust the audio delay.

1 Hold down the AUDIO DELAY key for more

than 3 seconds.

The left most indicator flashes.

2 Press the SUBWOOFER (+/–) key to adjust

the audio delay.

Pressing the SUBWOOFER (+) key delays the

audio output timing.

3 To finish the adjustment, press the AUDIO

DELAY key.

HINT

• The adjustment will be finished automatically if no

operations are performed for 20 seconds.

Flash 3 times (enabled), flash once (disabled)

(–) (+)

SRT POSITION (SRT position) keys

★

For optimum surround sound effect, select a

preset position mode according to where the unit

is installed (p.10).

Green (Dolby Digital), Red (DTS Digital Surround)

Off (PCM)

The surround sound is achieved by reflecting the sound beams off walls as shown in the

illustration below. For optimum surround effect, turn on the unit and select the SRT

POSITION key according to the installation position of the unit.

1 Hold down the SRT POSITION key that corresponds to the

installation position of the unit for more than 3 seconds.

The indicators on the front panel flash according to the set position.

Select the surround mode key to enjoy realistic surround effects that closely resemble a

movie theater, the middle of a music concert, or a sports field event, by Yamaha’s sound

field program, “CINEMA DSP.” You can select a surround mode key that best suits the

source from MOVIE, MUSIC, SPORTS, GAME, or TV PROGRAM.

1 Play back the source.

2 Press one of the surround mode keys (MOVIE, MUSIC, SPORTS,

GAME, or TV PROGRAM).

The SURROUND indicator on the front panel lights up.

(Example: when MOVIE is selected)

Surround mode

The surround modes are described below.

Select the surround mode that best suits the playback source and your personal taste.

HINT

• When the source is a 2-channel stereo signal, the sound is played back as surround sound by the Dolby

Pro Logic II technology.

Setting a surround sound effect for the installation

position (SRT position)

Left

Center

Right

(Left)

(Center)

(default setting)

(Right)

Left side of room

Center of room

Right side of room

Selecting a surround sound effect of your choice

Sound field program Features

MOVIE Creates a broad and expansive cinematic space. With Dolby or

DTS surround effects, this program enriches your cinematic

experience.

MUSIC Creates the palpable excitement, as if you were standing at the

front center of a live concert hall event.

SPORTS Creates the realistic atmosphere of a live sports event or talk

show.

GAME Enjoy three-dimensional sound effects with computer or video

games.

TV PROGRAM Creates optimum surround sound for TV programs.

Lights up

The surround effect is achieved using six channels (audio outputs) of the unit. While

listening to a series of test-tones from the unit, you can adjust the volume level of each

channel to balance the sound heard from your listening position. (Volume level

adjustment of each channel is not available when the unit is in stereo playback mode.)

1 Hold down the CH LEVEL key on the remote control for more than 3

seconds.

The STATUS indicator flashes in green during test-tone output. The test-tone

cycles through the channels in the order below. The test-tone is output from each

channel in turn for two seconds. You can confirm which channel is playing the test-

tone by the way the indicators flash.

2 While the test-tone is output from the channel to be adjusted, press

the SUBWOOFER key (+ or –) to balance the volume level with the

other channels.

During volume adjustment, the cycle of the test tone stops. When you have finished

adjusting the current channel level, release the + or – key and wait a moment for

the test-tone cycle to resume. You can check the volume level by the indicator

lights.

3 After adjustment is complete, press the CH LEVEL key again.

The test-tone stops.

HINT

• Press the VOLUME key (+ or –) to adjust the overall volume while the test-tone is being played back.

• When the SRT position setting is changed (p.10), the channel level setting will be overwritten.

Adjusting the volume level of each channel (CH

LEVEL)

Test-tone flow

Front (left)

Center

Front (right)

Surround (right)

Surround (left)

Subwoofer

Back to beginning

Listening to the sound from a

Bluetooth device

You can play back wirelessly from Bluetooth devices, such as smartphones or digital

music players.

See also the operating manual of the Bluetooth device for more details.

Pairing a Bluetooth device with the unit

When connecting to a Bluetooth device for the first time, “pairing” between the device

and unit is required. Once “pairing” with a device is completed, subsequent connection

with that device will not require “pairing.”

1 Press the BLUETOOTH key on the supplied remote control to select

Bluetooth as the input source.

The BLUETOOTH indicator on the front panel lights up in green.

2 Turn on the Bluetooth function of the device to be paired, and

perform pairing.

The operation varies depending on the device. Refer to the operation manual of the

device.

3 Select “SRT-1000 Yamaha” in the Bluetooth device list on the device.

If a passkey (PIN) is required, enter the number “0000.”

When pairing is completed, or a completion message appears on the device.

NOTE

• Perform pairing with the Bluetooth device and unit within 10 meters (33 ft) of each other.

• Up to eight Bluetooth devices can be paired with the unit. If a ninth device is paired, the oldest pairing

information is deleted.

• If pairing information for a device is deleted, to use that device again, pairing of the device is required

again.

• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection (p.13), then

perform pairing with the new device.

• Refer to “Bluetooth” (p.20) in “Troubleshooting” if pairing cannot be achieved.

Perform the following steps to use a Bluetooth device with the unit.

Bluetooth devices

Playing back audio from a Bluetooth device on the unit

For the first Bluetooth

connection

Pairing a

Bluetooth device

with the unit

For subsequent

Bluetooth connection

Lights up

Playing back audio from a Bluetooth device on the

unit

1 With the unit turned on, press the BLUETOOTH key on the supplied

remote control to select Bluetooth as the input source.

The BLUETOOTH indicator on the front panel lights up in green.

2 Turn on the Bluetooth function of the device.

When Bluetooth connection is made correctly, the BLUETOOTH indicator of the

unit flashes 3 times.

3 Play back a song on the device.

NOTE

• Perform Bluetooth connection with the device and unit within 10 meters (33 ft) of each other.

• It may be necessary to select “SRT-1000 Yamaha” in the Bluetooth device list again, in the event that a

connection problem occurs. You may have to change the output setting to output audio to the unit,

depending on the Bluetooth device you are using.

• Adjust the volume level of the Bluetooth device as required.

• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection, then connect

with the new device.

Terminating Bluetooth connection

Bluetooth connection is terminated in the following cases. When the unit is turned on

and the Bluetooth connection is terminated, the BLUETOOTH indicator flashes once.

• The Bluetooth function is turned off on the compatible device.

• The BLUETOOTH key is pressed for more than 3 seconds.

• The unit is turned off.

Using the Bluetooth standby mode

The Bluetooth standby mode allows you to turn on (or off) the unit automatically, that

interlocked by the operation of the Bluetooth device.

1 With the unit turned on, hold down the BLUETOOTH STANDBY key

for more than 3 seconds.

Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the

mode between enabled and disabled.

When the Bluetooth standby mode is enabled and the unit is turned off, the

STATUS indicator lights up in red. (Bluetooth standby)

Using the HOME THEATER CONTROLLER application

By installing the dedicated free application “HOME THEATER CONTROLLER” to a

Bluetooth device, such as a smartphone, you can perform various operations easily and

conveniently with the Bluetooth device.

(Setting items: basic operation, surround mode, sound adjustments)

For details on “HOME THEATER CONTROLLER,” see the product information on our

website.

Lights up

Flashes 3 times

Functions available on Bluetooth devices with Bluetooth standby mode enabled

Power on interlock function (when the unit is turned off)

When Bluetooth connection is made on the device, the unit will turn on and will be ready to play back

sound from the device.

Power off interlock function (when the unit is turned on)

The unit will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only when

BLUETOOTH is selected as the input source.)

Flash 3 times (enabled), flash once (disabled)

Lights up (red)

Settings

Once you program the unit, you can control it with your TV’s remote control for functions

such as turning on/off the TV and unit simultaneously, or volume up/down and muting/

unmuting of the unit.

1 Turn off the TV.

2 Turn off the unit.

3 Hold down the LEARN key on the unit’s remote control for more than

3 seconds to set the unit to the learning mode.

When the unit is in the learning mode, the indicators on the front panel flash as

shown below.

NOTE

• Steps 4 to 7 require only the TV’s remote control and the keys on the front panel of the unit. The

remote control of the unit is not necessary.

• If the unit has already learned functions, the following indicators light up.

Mute: BD/DVD, Volume (-): COAXIAL, Volume (+): ANALOG, Power: BLUETOOTH

4 Teach the unit the “Mute” code of the TV’s remote control.

4-1 Press MUTE on the front panel of the unit.

4-2 While pointing your TV’s remote control at the remote control sensor, hold

down the mute key for more than 1 second twice or three times.

5 Teach the unit the “Volume (–)” code of the TV’s remote control.

5-1 Press VOLUME (–) on the front panel of the unit.

5-2 While pointing your TV’s remote control at the remote control sensor, hold

down the volume (–) key for more than 1 second twice or three times.

Programming the unit with the TV’s remote control

(TV’s remote control learning function)

• This function is available only when your TV’s remote control uses IR (infrared) signal.

• An RF (Radio Frequency) remote control will not work.

• If you want to use a cable or satellite set top box’s remote control to operate the unit, use your original

TV’s IR (infrared) remote control to program the unit, then use the set top box’s remote control to

operate.

• If by changing the volume of the unit the TV’s volume also changes, set the TV’s volume to minimum, or

disable speaker output.

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 4-1.

Twice

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 5-1.

Twice

Approx. 30 cm (1 ft)

TV’s remote control

Hold down

(more than 1 second)

Release

(more than 1 second)

Hold down

(more than 1 second)

Release

(...)

Lights up

Flash

Lights up

Flash

6 Teach the unit the “Volume (+)” code of the TV’s remote control.

6-1 Press VOLUME (+) on the front panel of the unit.

6-2 While pointing your TV’s remote control at the remote control sensor, hold

down the volume (+) key for more than 1 second twice or three times.

7 Teach the unit the “Power” code of the TV’s remote control.

7-1 Press (power) on the front panel of the unit.

7-2 While pointing your TV’s remote control at the remote control sensor, hold

down the power key for more than 1 second twice or three times.

8 To finish the learning mode, press the LEARN key on the unit’s

remote control.

This completes the necessary settings. Now you can operate the unit with the TV’s

remote control’s mute key, volume keys, or power key.

HINT

• The learning mode will be finished automatically if no operations are performed for 5 minutes.

• Set the TV volume to minimum. When you turn up the volume of the unit with the TV’s remote

control, the volume of the TV may be turned up at the same time. In this case, follow Step 4 in

“Connections” (p.5) to change the TV setting.

• You can press the (power) key on the unit’s remote control to finish learning mode.

Clearing all learned operations

1 With the unit turned off, hold down the LEARN key on the supplied

remote control for more than 3 seconds (for entering the learning

mode).

When the unit is in the learning mode, the indicators on the front panel flash as

shown below.

2 Hold down INPUT on the front panel of the unit for more than 3

seconds.

If the clearing is completed, you will hear the bleep sound three times.

3 Press the LEARN key on the supplied remote control.

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 6-1.

Twice

Result Bleep/buzzer Indicators

Successfully

learned

Once

Failed to learn

* Repeat from

Step 7-1.

Twice

Lights up

Flash

Lights up

Flash

Flashes in red (cleared)

The unit has dual built-in subwoofers; however you can connect an external subwoofer

when you want to enhance low frequency sound. Connect a subwoofer to the

SUBWOOFER OUT jack of the unit.

NOTE

• Use an external subwoofer with built-in amplifier.

You can change the dynamic range to make sounds easy to hear at a low volume.

1 Turn off the unit.

2 Hold down the key for the desired mode for more than 5 seconds.

The unit turns on with the selected setting.

Three settings are available (see below).

You can confirm the setting status by the lights of the indicator, when the unit is turned

on.

NOTE

• Normal is set as default.

Using an external subwoofer

Mono input

Pin cable for subwoofer

(commercially available)

Unit (rear)

Overhead view

Making sound easy to listen at low volume

Setting Description Indicator

Normal Automatically adjusts the dynamic range

based on the volume level of the source.

Lights up in green

Standard Compresses the dynamic range to suit a

living room environment, etc.

Lights up in orange

Maximum Does not compress the dynamic range.

Lights up in red

Returns to Normal

Sets to Standard

Sets to Maximum

La page charge ...

Yamaha SRT-1000 Le manuel du propriétaire

Marque: Yamaha

Modèle: SRT-1000

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Yamaha SRT-1000 Owner's manual

Yamaha SRT-1000 Le manuel du propriétaire

Yamaha SRT-1000 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents