StarTech com U01043 3.2 Gen 1 5Gbps Active Cable Mode d'emploi

U01043 3.2 Gen 1 5Gbps Active Cable
Marque
StarTech com
Modèle
U01043 3.2 Gen 1 5Gbps Active Cable
Taper
Mode d'emploi
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: February 3, 2023 10:46 AM
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Product Diagram (U01043-USB-EXTENDER)
Front View
Rear View
33ft (10m) USB 3.2 Gen 1 5Gbps Active Cable with 4-Port USB Hub
Component Function
14x USB-A Peripheral Ports
• Connect USB-A Peripheral devices
• USB 3.2 Gen 1 (5 Gbps)
• Backward compatible with USB 2.0 and 1.1
• Supports up to 5 V and 0.9 A (4.5 W)
2Power LED
• Indicates if the included Power Adapter or the
Host Computer is supplying power
• Solid Green = Power
• O = No Power
3USB-A Host Cable • Used to connect the USB Active cable with
USB Hub to a Host Computer
4DC Power Port
• Connect the USB Active cable with USB Hub
to a Power Source using the included Power
Adapter
• Recommended 5 V and 4 A
Package Contents
• USB Active Cable with USB Hub x 1
• Power Adapter x 1
• Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations
of conformance, please visit: www.StarTech.com/U01043-USB-EXTENDER
• Computer with a USB-A Port
• USB peripheral device with required USB-A cables
Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood
before using this product.
Never operate this product if parts are missing or damaged.
*Product may vary from image
3
1
2
4
1
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com
Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
FR
À DÉPOSER
EN MAGASIN À DÉPOSER
EN DÉCHÈTERIE
OU
FR
Cet appareil,
ses accessoires,
cordons et piles
se recyclent
Installation
1. Connect the USB-A Host Cable to a USB-A Port on the Host Computer.
No drivers are needed for the USB active cable with USB hub.
2. Connect the Power Adapter to a Power Outlet and into the DC Power Port of
the USB Active cable with USB Hub.
3. Connect a USB Peripheral Device to any of the four USB-A Peripheral Ports.
Some USB peripheral devices may need drivers to nish their installation.
  • Page 1 1
  • Page 2 2

StarTech com U01043 3.2 Gen 1 5Gbps Active Cable Mode d'emploi

U01043 3.2 Gen 1 5Gbps Active Cable
Marque
StarTech com
Modèle
U01043 3.2 Gen 1 5Gbps Active Cable
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents