AUSounds AU-Flex Manuel utilisateur

FLEX ANC

USER MANUAL

Manuel d'utilisation | Manual

Manuale d'uso | Benutzer-Handbücher

Manual de Usuario | 사용 매뉴얼

|

Ausounds Intelligence, LLC.

15300 Ventura Blvd., Suite 214

Sherman Oaks, California 91403, USA

www.ausounds.com

Designed by Ausounds in California | Made in China

ConçuparAusoinds,Californie,fabriquéenChine

ProjetadopelaAusoundsnaCalifórnia|FabricadonaChina

ProgettatodaAusoundsinCalifornia,prodottoinCina

EntworfenvonAusoundsofCalifornia,hergestelltinChina

DiseñadaporAusoundsenCalifornia|HechaenChina

CaliforniaAusounds 회사가디자인,중국제조

CaliforniaAusounds

Ausounds

Thank you for purchasing the AU-Flex ANC Hybrid Planar Magnetic

Wireless Noise Canceling Earphones. Please read this user manual

carefully before using this product, and keep it for future reference.

AU-Flex ANC is a neck-mounted, Bluetooth®, active noise canceling

earphone. Engineered with a unique Hybrid Planar Magnetic driver that

delivers a wide and accurate soundstage only found in planar technolo-

gy. This innovation provides an Ausounds audio signature that is a

precision-balanced sound optimal for long-listening sessions.

CONTENTS

Please check if the following parts in the package are complete.

Earphones Portable Storage Bag

Ear Tips Charging Cable

PRODUCT DETAILS

Charging and battery life

Please charge for 1 hour prior to the first use.

Allow an additonal 15 minutes after inital charge has been completed.

Connect the earphones to the USB charger, or port using the included

USB-C cable. The LED charging indicator shows a green light, when the

earphones are charging. A full charge takes about 1.5 hours. When the

status indicator is off, the earphones are fully charged. This product

supports rapid charging, and can be used for 2-3 hours after charging for

15 minutes.

ANC

Multi-Function Button

Volume +/- Button Microphone / LED Indicator

ANC Button

ANC

LISTENING COMFORT

Replace the ear tip

Select the ear tip that provides the most comfortable fit and audio seal.

Lightly Pull the ear tip to remove it from the earphones, and install a new

suitable ear tip.

Wearing earphones

When wearing the earphones, bend the earloop into the shape of the ear,

then place the ear hook behind the ear. Lightly insert the earbuds into the

ear and and rotate it for a comfortable fit. There is a left side and a right

side earbud as indicated by the L and R markers on them.

First connection

After turning on the earphones it will enter search pairing mode. Turn on

the pairing feature on the device you want to pair with your earphones.

In the list of available devices, find and select "AU-Flex ANC" to pair. If

the pairing is successful, you can check the power of the earphones on

the mobile device (Andriod devices vary by system).

Connect again

The AU-Flex ANC stores your last connected device in memory. When the

automatic connection is completed, the indicator light will turn white for

3 sec and then flash once. When the connection is successful a tone will

be prompted. If the automatic connection fails 2 times, device will enter

the search pairing mode.

Power On

Power Off

In the off state, press and hold the Multi-Function Button for 2 sec

until the power on tone is sounded.

In the power on state, press and hold the Multi-Function Button

for 3 sec until the shutdown tone is sounded

BLUETOOTH FEATURES

Clear pairing record

In the power on state, press and hold the “+,-” button at the same time,

clear the pairing record after 5 sec and enter the search pairing mode.

MUSIC AND CALL CONTROL

When you receive a call, the ringtone will play temporarily, and once the

call is over, music will continue to play.

Play/Pause

Volume adjustment

Switch next/

previous song

Click once on the Multi-Function Button

Click the +/- button to adjust the volume to make

louder/quieter

Press and hold the +/- button for 1 sec to switch the

next/previous song

Once the earphones are paired with your smartphone, making and

receiving calls can be controlled through the earphones.

Answer/End call

Decline incoming call

Call device switching

Activate voice assisstant

Press the Multi-Function Button once

Long press the Multi-Function Button for 1 sec

When calling or receiving calls, press and hold the

volume + button for 2 sec to switch between the

earphones and the phone

Double click on the Multi-Function Button

Function Description

Power On

Power Off

Automatic connection

/Reconnection success

Standby mode

Search pairing

Switch mode success

Calling

Hang up the phone successfully

Declining call successfully

LED Effects

White light is on for 2 sec

Green light is on for 2 sec

White light 3 sec 1 flash

White light 5 sec 2 flashes

Green and white alternately flash

White light flashes once

White light flashes for 0.5 sec

Green light flashes once

Green light flashes twice

LED INDICATOR

SPECIFICATIONS

Bluetooth Version

Bluetooth Protocol

Bluetooth Range

ANC Depth

Driver Type

Driver Size

Impedance

Frequency Range

SPL

Battery Life

Battery Capacity

Charging Time

Weight

Waterproof level

BT 5.0

SBC, AAC, LDAC

10m | 32 ft

25db

Hybrid Planar Magnetic

10mm x 8mm

16 ohms

20Hz-40kHz

99db

22 Hours

175mAh

1.5 Hours

38g

IPTX5

ANC ACTIVE NOISE CANCELLATION

After the Bluetooth earphones are turned on, the noise cancellation

function is turned off by default. When listening to songs, short press

the ANC button, the LED indicator will flash white, and the voice will

prompt: “ANC OFF”, “ANC ON”, “MONITOR MODE”.

Battery Reserve Magnetized Buds

During the call if the magnetized buds are connected, the call switches

to your mobile phone, and the earphones enter standby (not off). If the

magnetized buds are disconncected within 5 minutes, the earphones

will return to the previous setting. If they are connected for more than 5

minutes, the earphones will power off.

SAFETY INSTRUCTIONS

• Do not attempt to make any modifications to the product, including removing or

modifying the product, as the damage is not covered by the warranty.

• Do not place the product in extremely high or low ambient temperatures for

extended periods of time. Extreme temperatures can cause equipment to

deform, and reduce the charging capacity of the device.

• Thunderstorm weather may affect the normal use of the product and there is a

risk of electric shock, so please do not use the earphones outside during

thunderstorms.

• This product contains small parts. Do not swallow it to avoid danger. Keep the

product out of the reach of children.

• Using the product for a long time at high volume may affect your hearing,

please control the volume.

• If this product supports active noise cancellation. Please do not turn this

function on when walking, driving, or cycling to avoid accidents.

BATTERY WARNING

This product contains lithium battery, please do not disassemble, impact, squeeze

or put into fire. Please do not place the product under high temperature or hot sun,

beware of explosion. If there is swelling, leakage, odor or any other abnormality in

the battery compartment of the product, do not continue to use it. Please dispose

of used batteries properly in accordance with local regulations.

WARNING

Do not subject the product to excessive shock. If your product has touch sensor,

do not apply stickers or other adhesive items to the touch sensor control panel. Be

careful not to catch your finger in the unit when folding. The Bluetooth function

may not work with a mobile phone, depending on the signal conditions and the

surrounding environment. Do not apply weight or pressure to the product for long

periods, including when it is stored, as it may cause deformation. If you experience

discomfort while using the product, stop using it immediately. If this product has

earpads/ ear tips they may be damaged or deteriorate with long-term use and

storage.

CLEANING THE UNIT

When the outside of the product is dirty, clean it by wiping with a soft dry cloth. If the

product is particularly dirty, soak a cloth in a dilute solution of neutral detergent, and

wring it well before wiping. Do not use solvents such as thinner, benzene, or alcohol,

as they may damage the surface.

DO NOT USE THE HEADSET NEAR MEDICAL DEVICES

This product has magnets which may interfere with pacemakers, defibrillators and

programmable shunt valves or other medical devices. Do not put this product close to

these medical devices and the person who use any of these medical devices. Consult

your doctor before using this product, if you have any concerns.

DO NOT PLACE CARDS WITH MAGNETS

IN THE VICINITY OF THE HEADSET

This product has magnets. Placing cards with magnets in the vicinity of the product

may affect the magnetism of the card and render it unusable.

READ ALL INSTRUCTIONS BEFORE USE AND

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

FCC RF EXPOSURE STATEMENT:

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter. This device complies with FCC radiation exposure limits

set forth for an uncontrolled environment.

CAUTION!

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

ISEDC STATEMENT

This device complies with Innovation, Science, and Economic Development

Canada license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’ Innovation, Sciences et

Développement économique Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil

nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de classe b est conforme à la norme nmb - 003 du canada.

ISEDC RF EXPOSURE STATEMENT

The device is compliance with RF exposure guidelines, users can obtain Canadian

information on RF exposure and compliance.

LE PRÉSENT APPAREIL EST CONFORME

Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,

les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and

compliance d’acquérir. les informations correspondantes.

PRODUCT WARRANTY

Ausounds Intelligence warrants this product to the original purchaser to be free from

defects in material and workmanship, under normal conditions for a period of 1-year

for parts and labor only from the date of original purchase. Ausounds agrees at our

option during the warranty period, to repair any defect in material or workmanship or

to furnish an equal product in exchange without repair charges, during the first 365

days. After 365 days, a flat labor rate may be required and payment sent along with

the product. Except where prohibited by applicable law, this warranty is

nontransferable and is limited to the original purchaser and the country in which the

product was purchased. This warranty gives you specific legal rights, and you may

also have other rights, including a longer warranty duration that may vary under local

laws. If you do not find a solution on our website, please contact the retailer from

whom you made your purchase. Valid warranty claims are generally processed

through the point-of-purchase retailer during the first thirty (30) days after purchase.

This period of time may vary depending on the retailer. If your warranty claim cannot

be processed through the point-of-purchase retailer, please contact our support

department at support@ausounds.com or call direct at 1-818-873-0113.

Please follow these directions to return your product:

1. Contact Ausounds support at support@ausounds.com or 818-873-0113 to

receive a return authorization

2. Pack the unit in a well-padded sturdy carton if you do not have the original

packaging

3. Enclose a copy of your sales receipt to validate the date of purchase

4. Ausounds will elect to repair or replace the product free of repair charges during

the first 365 days. After 365 days, payment for labor may need to be sent with the

product. Call customer support at 818-873-0113 or email

[email protected]

Ausounds Intelligence

Attention: Warranty Services

3190 Chicago Ave Riverside, CA 92507-3448 US

NOTE: This warranty does not cover any product which has been subject to damage

due to misuse, neglect, accidental damage, abuse, commercial use, or any product

modifications. This warranty does not cover damage due to improper operation or

maintenance, connection to an improper voltage supply, or attempted repair by

anyone other than Ausounds. This warranty does not cover products sold AS IS or

refurbished units. For consumers, who are covered by consumer protection laws or

regulations in their country of purchase or, if different, their country of residence,

the benefits conferred by Ausounds’ Limited Warranty are in addition to all rights

and remedies driven by such consumer protection laws and regulations , including

but not limited to these additional rights.

National Statutory Rights

Consumers have legal rights under applicable national legislation governing the

sale of consumer goods. Such rights are not affected by the warranties in this

Limited Warranty. In Brazil, remedies include the consumer’s option to keep the

defective product and receive a proportional price reduction.

European Union notice:

Please note that, in the European Union, any warranty period less than two years shall

be increased to two years.

For Australia/New Zealand Consumers Only:

Our goods come with guarantees that cannot be excluded under the Australian

Consumer Law. You are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to a major failure. This warranty is provided

by Ausounds Intelligence, LLC 15300 Ventura Blvd Suite 214 Sherman Oaks, CA

91403. Contact information for Australia/New Zealand Consumers Only: Telephone:

1 818-873-0113. For any product/warranty -related questions, please contact

customer support at suppor[email protected]

For Japan Consumers Only:

The Federal Arbitration Act (the “FAA”) applies to the agreement to arbitrate to the

maximum extent allowable. Except as preempted by FAA, the laws of the State of

California, without reference to its choice of laws principles, will govern this Limited

Warranty. With the exception of disputes in small claims court or in arbitration, You

and Ausounds consent to jurisdiction and venue in the state or federal courts located

in Los Angeles County, California, for any claims arising out of a dispute relating to

this Limited Warranty. Notwithstanding the Section titled “Binding Arbitration and

Class Action Waiver”, if You are a consumer in Japan, You have the right to resolve

disputes before the Tokyo District Court in Japan. Nothing in this Limited Warranty

affects Your rights as a consumer in Japan to rely on mandatory provisions of

Japanese law. Contact information for Japanese Consumers Only: Telephone:

03-3477-0122. For any product/warranty -related questions, please contact

customer support at suppor[email protected]

Merci d’avoir acheté les écouteurs sans fil magnétiques planaires

AU-Flex ANC Hybrid. Veuillez lire attentivement ce manuel d’utilisation

avant d’utiliser ce produit et de le conserver pour référence ultérieure.

Le système AU-Flex ANC est un écouteur Bluetooth®, de suppression

du bruit actif. Conçu avec un driver magnétique planaire hybride

unique qui offre une scène sonore large et précise uniquement dans la

technologie planaire. Cette innovation offre une signature audio

Ausounds qui est un son équilibré de précision optimale pour les

sessions d’écoute longue.

CONTENU

Veuillez vérifier si les pièces suivantes de la boîte sont complètes

Écouteurs

Sac de rangement portable

Embouts auriculaires Câble de charge

DÉTAILS DU PRODUIT

Charge et autonomie

Veuillez charger 1heure avant la première utilisation.

Laisser 15 minutes supplémentaires après le chargement complet.

Connectez les écouteurs au chargeur USB ou au port en utilisant le câble

USB-C inclus. L’indicateur de charge LED affiche une lumière verte

lorsque les écouteurs sont en charge. Une charge complète prend

environ 1,5heure. Lorsque l’indicateur d’état est éteint, les écouteurs sont

complètement chargés. Ce produit prend en charge la recharge rapide et

peut être utilisé pendant 2à 3heures après une charge de 15minutes.

ANC

Bouton multifonction

Bouton Volume +/-Microphone/Indicateur LED

Bouton ANC

ANC

CONFORT D’ÉCOUTE

Remplacer l’embout auriculaire

Sélectionnez l’embout auriculaire qui offre le port le plus confortable

et le meilleur son audio. Tirez légèrement sur l’embout auriculaire

pour l’enlever des écouteurs et installez un nouvel embout auriculaire

adapté.

Porter des écouteurs

Lorsque vous portez les écouteurs, pliez la boucle auriculaire en

forme d’oreille, puis placez le crochet d’oreille derrière l’oreille. Insérez

légèrement les écouteurs dans l’oreille et faites-les pivoter pour plus

de confort. Il y a un écouteur gauche et droit comme indiqué par les

marqueurs L et R.

Première connexion

Après avoir allumé les écouteurs, il passe en mode recherche d’apparie-

ment. Allumez la fonction d’appariement sur l’appareil que vous

souhaitez coupler avec vos écouteurs. Dans la liste des périphériques

disponibles, recherchez et sélectionnez « AU-Flex ANC » à coupler. Si

l’appariement réussit, vous pouvez vérifier la puissance des écouteurs

sur le dispositif mobile (les appareils Android varient selon le système).

Connexion automatique

Le système AU-Flex ANC stocke votre dernier appareil connecté en

mémoire. Lorsque la connexion automatique est terminée, l’indicateur

lumineux devient blanc pendant 3 secondes, puis clignote une fois.

Lorsque la connexion est réussie, un ton se déclenchera. Si la connexion

automatique échoue 2 fois, l’appareil passe en mode d recherche

d’appariement.

Mise sous

tension

Mise hors

tension

En état hors tension, appuyez sur le bouton multifonction et

maintenez-le enfoncé pendant 2secondes jusqu’à ce que

l’alimentation sur tonalité soit déclenchée.

En état sous tension, appuyez sur le bouton multifonction et

maintenez-le enfoncé pendant 2secondes jusqu’à ce que

l’alimentation sur tonalité soit déclenchée.

CARACTÉRISTIQUES BLUETOOTH

La page charge ...

AUSounds AU-Flex Manuel utilisateur

AUSounds AU-Flex Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents