Aqara Cube T1 Pro Manuel utilisateur

Taper
Manuel utilisateur
128g
80g
Cube T1 Pro User Manual
Würfel T1 Pro Benutzerhandbuch
Cube T1 Pro--Manuel d'utilisation
Cubo T1 Pro Manual de usuario
Cube T1 Pro Manuale d'uso
Куб T1 Pro Руководство пользователя
큐브 T1 Pro 사용자�매뉴얼
魔方控制器T1 Pro用戶手冊
. 01
. 17
. 31
. 46
. 60
. 74
. 87
. 95
*This product requires an Aqara Zigbee hub. Some functions require
specific hubs. For details, please see: www.aqara.com/support.
Aqara Cube T1 Pro is a new wireless controller, which
supports two modes: Action Mode and Scene Mode. The
action mode supports six modes: flip90°, flip 180°, tap
twice, push, shake and rotate. The scene mode supports
six states (face 1 ~ 6/any side up) and various action
control modes such as rotate, pick up and hold, and
shake when face 1-6 up. “Triggered aer one-minute
inactivity”is supported in both modes. It can be placed
on any surface, bound with the hub and work with other
smart devices to perform various smart automations.
Product Introduction
01
Quick Setup
Add Device
1. Download the Aqara Home app.
Search for "Aqara Home" in the Apple App Store, Google
Play,Xiaomi GetApps, Huawei App Gallery,or scan the
following QR code to download the Aqara Homeapp:
02
Reset button
Indicator light
Long press for 5 s: Reset/binding
Click: Effective communication distance
test/device searching
Five clicks: Device mode switching
* If the device fails to be added, please move the device close to the hub
and try again.
* Quickly press the reset button once, or pick up the Cube and shake it
with force. If the hub gives a prompt sound, it indicates that the device
can communicate effectively with the hub.
* Different hubs give the prompt of successful connection in different
ways. Please refer to the introduction of the hub.
2. An Aqara Zigbee hub is required. Please make sure
you have an Aqara Zigbee hub installed and added to
the Aqara Home app.
3. Open the battery cover with the ejector tool.
4. Open the app, click "+" in the upper right corner of the
home page to enter the "Add Accessory" page, select
"Cube T1 Pro", select the hub to be connected,
operate according to the instructions on the app, and
then long press the device reset buttonfor 5 seconds,
waiting for the hub to indicate that the connection is
successful.
5. For moreinformation, please visit: aqara.com/support.
03
* To ensure stable wireless communication, please avoid installation on
metal surfaces.
Inspection and Installation
Effective distance test: Pick up the Cube and shake it or
press the reset button. If the hub gives a prompt sound,
it indicates that the device can communicate effectively
with the hub.
Mode Switching
Open the Aqara Home app, enter the device page, and
click "..." in the upper right corner, enter the device
setting page, click "More Settings", click "Mode
Switching", and select the desired mode.
Battery Replacement
Open the battery cover of Cube T1 Pro with the ejector
tool, take out the battery, replace it with a new CR2450
battery (note that the positive electrode of the battery is
upward), and then close the battery cover again.
04
Instructions
05
+
Action mode
Flip 90°: Pick up the Cube
and flip by 90°
90°
Flip 180°: Pick up the Cube
and flip by 180°
180°
Triggered aer one-minute inactivity: The Cube is moved
aer stands still for one minute
06
Shake: Pick up the Cube and
shake it back and forth quickly
twice
Tap: Pick up the Cube and
tap it twice
Rotate: Rotate the Cube
on a surface
Push: Push the Cube on a
surface
07
Scene Mode
*HomeKit only supports this
function.
Pick up and hold: Pick
up the cube and hold
still
Pick up and hold: Pick up the
cube and hold still
Shake: Pick up the Cube and
shake it back and forth quickly
twice
Side X up *: Flip the Cube
to the X (1 ~ 6/any) side up
X
08
Specifications
Product Model: CTP-R01
Dimensions: 45×45×45mm (1.77×1.77×1.77in.)
Net Weight: 76 g
Battery: CR2450 (Replaceable)
Wireless Protocol: Zigbee
Operating Temperature: -10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity: ≤ 95% RH, no condensation
Zigbee Operation Frequency: 2405- 2475MHz
Zigbee Maximum Output Power ≤ 13 dBm
Online Customer Service: www.aqara.com/support
Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park,
Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang
Community, Taoyuan Residential District, Nanshan
District, Shenzhen, China
09
Under normal use of condition, this equipment should
be kept a separation distance of at least 0 mm between
the antenna and the body of the user.
Warnings
1. This product is not a toy, please keep children away
from this product.
2. This product is designed for indoor use only. Do NOT
use in humid environments or outdoors.
3. Beware of moisture, do NOT spill water or other
liquids onto the product.
4. Do not place this product near a heat source.
5. Do not attempt to repair the product by yourself. All
repairs should be performed by authorized personnel.
6. This product is designed only for improving the
convenience of household life, and for status
notifications. If the user violates the product
instructions and this warning, the manufacturer is not
responsible for any risks and property losses caused
thereby.
Hereby, [Lumi United Technology Co., Ltd]
EU Declaration of Conformity
declares that the radio equipment type [Cube T1
Pro,CTP-R01] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
https://www.aqara.com/DoC/
WEEE Disposal and Recycling Information
All products bearing this symbol are waste
electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed with
UK Declaration of Conformity
Hereby, [Lumi United Technology Co., Ltd]
declares that the radio equipment type [Cube T1
Pro,CTP-R01] is in compliance with Directive 2017 (SI 2017
No.1206, as amended by SI 2019 No. 696).
The full text of the UK declaration of conformity is
available at the following internet address:
http://www.aqara.com/DoC/
10
CAUTION
1. Risk of explosion if the battery is replaced by an
incorrect type.
11
Symbol on the product or on its packaging
indicates that this product may not be
treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
unsorted household waste. Instead, you should protect
human health and the environment by handing over your
waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential
negative consequences to the environment and human
health. Please contact the installer or local authorities for
more information about the location as well as terms and
conditions of such collection points.
2. Dispose of used batteries according to the instructions.
3. Do not ingest battery, Chemical Burn Hazard.
4. This product contains a coin / button cell battery. If the
coin / button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to
death.
5. Keep new and used batteries away from children.
6. If the battery compartment does not close securely,
stop using the product and keep it away from children.
7. If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
8. Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can
result in an explosion.
9. Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas
10. A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of
flammable liquid or gas.
12
FCC ID:2AKIT-CTP-R01
Federal Communications Commission (FCC) compliance
statement:
1.This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
2.Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
13
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
The SAR limit of FCC is 1.6W/kg over 1 gram of tissue for
use against the body. The highest SAR value reported
under this standard during product certification when
properly worn on the body is 0.17W/kgThis device was
tested for typical body-worn operations with the edge of
the device kept 0mm from the body.
14
IC:22635-CTPR01
IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/re-
ceiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
This Class B digital apparatus complies with Canadian
ICES003.
This device complies with RSS247 of Industry Canada.
Operation is subject to the condition that this device
does not cause harmful interference.
The SAR limit of IC is 1.6W/kg over 1 gram of tissue for
use against the body. The highest SAR value reported
under this standard during product certification when
properly worn on the body is 0.17W/kgThis device was
15
*Please read this manual carefully and keep it in a safe place.
*If necessary, the contents of this manual will be modified or adjusted
without special notice.
tested for typical body-worn operations with the edge of
the device kept 0mm from the body.
Scan to get the Zigbee Install Code on the last page of
the manual.
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109

Aqara Cube T1 Pro Manuel utilisateur

Taper
Manuel utilisateur