LG LDP6810SS Le manuel du propriétaire

ENGLISH ESPAÑOL

FRANÇAIS

OWNER'S MANUAL

LDT780#** LDP770***

LDT680*** LDP680***

LDPS684*** LDP780***

MFL69261722

Rev.13_031120

www.lg.com

DISHWASHER

Read this owner's manual thoroughly before operating the appliance

and keep it handy for reference at all times.

LDP681***

2

TABLE OF CONTENTS

3 PRODUCT FEATURES

4 SAFETY INSTRUCTIONS

4 IMPORTANT SAFETY INSTRUCTIONS

9 PRODUCT OVERVIEW

9 Exterior Parts

10 Interior Parts

10 Accessories

11 INSTALLATION

11 Installation Parts and Tools

12 Installation Overview

12 Product Dimensions

12 Product Specifications

13 Preparing Cabinet Opening

14 Preparing Water and Electrical Connections

15 Preparing Dishwasher

16 Attaching Installation Brackets

17 Sliding Dishwasher into Cabinet Opening

19 Connecting Water Supply Line and Power

21 Connecting Drain Hose

23 Leveling Dishwasher

25 Securing Dishwasher to Cabinet Opening

26 Final Installation Check

27 OPERATION

27 Using the Appliance

28 Control Panel

30 Cycles

31 Options

32 Cycle/Option Guide

33 Loading the Dishwasher

33 Loading the Lower Rack

35 Loading the Silverware Basket

36 Loading the Upper Rack

39 Loading the Cutlery Rack (On Some Models)

41 Adding Cleaning Agents

43 SMART FUNCTIONS

43 LG ThinQ Application

45 Smart Diagnosis™ Function

46 MAINTENANCE

46 Cleaning the Exterior

46 Cleaning the Interior

46 Seasonal Maintenance and Storage

47 Clogged Drain Air Gap or

In-Sink Disposal

48 Cleaning the Filters

49 Cleaning the Spray Arms

50 TROUBLESHOOTING

50 FAQs: Frequently Asked Questions

52 User Support Videos

53 Before Calling for Service

57 LIMITED WARRANTY

57 USA

61 CANADA

65 Warranty Exceptions (U.S. and Canada)

3PRODUCT FEATURES

ENGLISH

PRODUCT FEATURES

QuadWash™ System

Multi-Motion lower spray arm shoots water in various directions and at optimized intensities to reach every area

of the tub. This system provides more powerful and complete cleaning coverage.

Inverter Direct Drive Motor

LG's experience in motor technology results in extraordinary functionality, with advanced features like the Dual

Zone option, whisper-quiet operation, energy efficiency, and durability.

The simple design and high build quality of the motor make it so reliable that it's covered for 10 years under the

warranty.

EasyRack Plus

This easy-to-use system of adjustable tines and rack height provides more flexibility and versatility when

loading dishes of various shapes and sizes.

Hybrid Drying System

This efficient drying system does not use a heating element during the drying process resulting in superior

energy efficiency and gentle care for dishes.

LG ThinQ™

Download the new LG smart phone app to set options, self-diagnose and troubleshoot problems with the

appliance, and access other useful features. This function uses Wi-Fi.

TrueSteam™ Technology

Tiny drops of purified water coat the surfaces of every dish from the steam that fills the tub, resulting in

sparkling clean dishes.

4 SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

follow all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others.

All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.

These words mean:

WARNING

You may be killed or seriously injured if you do not follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and

tell you what may happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, scalding or injury

to persons when using this product, follow basic precautions, including the

following:

INSTALLATION

• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

• To reduce the risk of severe injury or death, follow all installation instructions.

• The appliance must be installed and electrically grounded by qualified service personnel in accordance with

local codes.

• Disconnect the power supply line, house fuse or circuit breaker before installing or servicing the appliance.

• When moving or installing the product in a different location, call qualified service personnel for installation

and service.

• Keep packing materials out of the reach of children. Packaging material can be dangerous for children.

There is a risk of suffocation.

• Moving or installation of the appliance requires two or more people.

• This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft.

5SAFETY INSTRUCTIONS

ENGLISH

• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to

outdoor weather conditions.

• This appliance must be positioned near to an electrical power supply.

• Do not, under any circumstances, cut or remove the ground from the power supply line.

• When installing or moving the appliance, be careful not to pinch, crush, or damage the power supply line.

• Do not install the appliance in humid spaces.

• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might

use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has

missing or broken parts, including a damaged power supply line.

• Adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety

glasses.

• The installer must ensure that the dishwasher is completely enclosed at the time of installation.

• Use new hoses when connecting the appliance to the water supply. Do not reuse old hoses.

• After installing, check the hose connection for leaks.

• Do not damage or place heavy items on the power supply line of the appliance.

OPERATION

• Repair or immediately replace all power supply lines that have become frayed or otherwise damaged. Do

not use a power supply line that shows cracks or abrasion damage along its length or at either end.

• If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it

immediately, and contact an LG Electronics customer information center.

• Never unplug the appliance by pulling on the power supply line.

• Do not use an extension cable or adapter with this appliance.

• Do not grasp the power supply line or touch the appliance controls with wet hands.

• Do not modify or extend the power cable.

• If the product has been submerged, contact an LG Electronics customer information center for instructions

before resuming use.

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

• Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.),

gasoline, chemicals and other flammable vapors and liquids.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning the use of the appliance by a person responsible for their safety.

• If the electrical supply line is damaged, it must only be replaced by the manufacturer or its service agent or

a similar qualified person in order to avoid a hazard.

• Do not abuse, sit on, or stand on the door of the appliance.

• Read all instructions before using the appliance and save these instructions.

• Use this appliance only for its intended purpose.

6 SAFETY INSTRUCTIONS

• Do not allow children to play on, in or with the appliance. Close supervision of children is necessary when

the appliance is used near children.

• Do not tamper with controls.

• In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance. Open a

window or door to ventilate the area immediately.

• Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used

for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for

such a period, before using the appliance turn on all hot water faucets and let the water flow from each for

several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or

use an open flame during this time.

• Fix the drain hose securely in place.

• Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the

reach of children.

• Do not let children eat detergent or dishwasher rinse agent.

• When loading items to be washed:

- Locate sharp items so that they are not likely to damage the door seal.

- Load sharp knives with the handles up to reduce the risk of cuts.

• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not

so marked, check the manufacturer’s recommendations.

• Do not touch the HEATING ELEMENT during or immediately after use.

• Do not operate your dishwasher unless all ENCLOSURE panels are properly in place.

• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

• Do not install or store the dishwasher where it will be exposed to weather conditions.

• After cleaning the dishes, turn off the faucet. Turn on the faucet again and check the connection status of

water supply hose before cleaning.

• Do not open the door while operating. For safety reasons, the drain pump operates if the door is opened,

resulting in a longer cycle time.

• Be careful not to catch your hand when closing the door of the product.

• Do not plug the dishwasher into a damaged outlet.

• Do not install or keep the dishwasher near electrical components or exposed flames.

• Do not wash dishes exposed to gasoline, solvents or other flammable materials.

• When cleaning, do not spray water on the product directly.

• Do not press buttons with a sharp object such as an awl or pin.

• Do not use solvent-based detergent.

• Do not come into contact with the steam outlet.

• Small parts, such as rack clips and filter retaining posts can be a choke hazard to small children if removed

from the dishwasher. Keep out of reach of small children.

7SAFETY INSTRUCTIONS

ENGLISH

MAINTENANCE

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified

service personnel unless specifically recommended in this Owner’s Manual. Use only authorized factory

parts.

• Do not disassemble or repair the appliance by yourself.

• Remove any dust or foreign matter from the power supply line.

• Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.

Turning the controls to the OFF position does not disconnect this appliance from the power supply.

• Remove the door before the appliance is removed from service or discarded to avoid the danger of children

or small animals getting trapped inside.

• Unplug the appliance before cleaning to avoid the risk of electric shock.

• Before discarding the appliance, cut off the power supply line and destroy the appliance's control panel.

GROUNDING INSTRUCTIONS

• For a permanently connected dishwasher: This appliance must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead to the appliance.

• Connect the ground wire to the green ground connector in the terminal box.

TIP OVER HAZARD

• Do not use the dishwasher until completely installed.

• Do not push down on the open dishwasher door.

• Failure to follow these instructions may result in serious injury or cuts.

SAVE THESE INSTRUCTIONS

8 SAFETY INSTRUCTIONS

CAUTION

To reduce the risk of minor injury to persons, malfunction, or damage to the

product or property when using this product, follow basic precautions, including

the following:

INSTALLATION

• Install the product on a firm and level floor.

• This dishwasher must be connected to a hot water supply with a temperature range between 120 °F (49 °C)

and 149 °F (65 °C). This temperature range provides the best washing results and shortest cycle time. The

temperature should not exceed 149°F (65 °C) to prevent damage to dishes.

• Do not put the drain hose under the dishwasher during installation.

OPERATION

• Do not place objects on top of the appliance.

• Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period of

time, such as during vacations.

• Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the

appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance.

• Do not touch draining water which may be hot.

• If the drain hose and the water supply hose are frozen in winter, defrost before using the appliance.

• Do not put hands, feet, or metal objects below or behind the appliance.

• Do not put the drain hose under the dishwasher during installation.

MAINTENANCE

• If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of the

product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or abrasives.

These substances may discolor or damage the appliance.

9PRODUCT OVERVIEW

ENGLISH

PRODUCT OVERVIEW

Exterior Parts

3

4

8

1

5

9

2

7

6

1

Control Panel

2

Door Handle

3

Front Cover

4

Lower Cover

5

Shipping Brace

6

Safety Cover

7

SignaLight™

8

Base

9

Leveling Feet

NOTE

• Do not remove the safety cover at any time.

• To ensure reliability, each LG dishwasher goes through thorough quality control before it leaves the factory.

• You may find water droplets or water spots from this process inside your new dishwasher.

SignaLight™ (Front Display)

The top-control models have 3 indicator LEDs centered at the top of the front cover.

• Red : Error (See the Error Codes in Troubleshooting section.)

• White (steady): Normal operation.

• White (blinking): Cycle has been paused. (After four minutes in pause mode, the machine turns off.)

• Green: Cycle finished normally.

The default “ON” setting keeps the green light on until the door is opened. If the setting is changed to “OFF”,

the green light turns off after 90 seconds. To change the setting, turn the power on and press and hold the

High Temp button for 3 seconds until “ON” or “OFF” appears in the display. The setting is stored until you

change it.

2

3

7

1

4

8

6

5

1

Control Panel & Door Handle

2

Front Cover

3

Lower Cover

4

Shipping Brace

5

Safety Cover

6

SignaLight™

7

Base

8

Leveling Feet

10 PRODUCT OVERVIEW

Interior Parts

10

6

11

12

5

9

2

8

1

3

4

7

4

Filtration System

5

Detergent and Rinse Aid Dispenser

6

Drying Vent Cover

7

Tub Light (some models)

8

Cutlery Rack (some models)

9

Upper Rack

10

Silverware Basket

11

NOTE

• The silverware basket ships installed at the back

of the bottom rack. For best performance, install it

along the right side as shown in the Interior Parts

section.

• Remove all packing materials from the exterior

and interior of the dishwasher before installing the

appliance.

• Press the tab to remove the cable tie by hand.

Cutting the tie with a knife or scissors may damage

the rack or the silverware basket.

Accessories

Included Accessories

Installation

brackets

(2ea)

Wood screws

(4ea)

Hose clamp

(1ea)

Top Wash Impeller

Upper Spray Arm

1

2

Lower Spray Arm

3

Lower Rack (appearance may vary)

Steam nozzle

12

2

3

11INSTALLATION

ENGLISH

INSTALLATION

Installation Parts and Tools

Parts not Provided

Electrical cable Water supply tube Fittings for tube Coupler Electrical tape

Air gap Wire nuts for

16-gauge wiring

Hose clamp UL approved

strain relief

Tools Needed

Flat-blade

screwdriver

Phillips

screwdriver

Hole saw

min. 2½” bit

Electrical drill Gloves

Safety glasses Adjustable wrench Tape measure Utility knife Level

¼” Square

drive wrench

Nipper Pliers Wire stripper Tubing cutter

⅜” Square drive

wrench + ½” Socket

12 INSTALLATION

Installation Overview

Preparing Cabinet Opening

Preparing Electrical Wiring

Preparing Water Supply Connection

Preparing the Dishwasher

Removing Lower Cover

Sliding the Dishwasher into Cabinet

Leveling the Dishwasher

Securing the Dishwasher to Countertop

Connecting the Drain Hose

Connecting Water Supply

Connecting Power

Final Check

Product Dimensions

Back view Side view

33 /16"

(846 mm)

5

23 /4" (603 mm)

3

4 /2"

(115 mm)

1

33 /8"

(854 mm)

5

2 /16" (75 mm)

15

20 /16" (512 mm)

3

24 /8" (625 mm)

5

4 /4" (120 mm)

3

9 /8"

(238 mm)

3

4 /16"

(119 mm)

5

/4"

(134 mm)

11

1

4 /2"

(115 mm)

1

26 /8 - 26 /16" (676 - 681 mm)

5 13

Water supply hose, drain hose and electric cable should be passed

through this area.

NOTE

• For easiest installation, see marked areas above for water and electrical clearances in base of dishwasher.

Product Specifications

The appearance and specifications listed in this manual may vary due to constant product improvements.

Electrical requirement 120 V, 60 Hz AC only, minimum 15 A circuit breaker

Water pressure 20 - 80 psi (140 - 550 kPa)

Dimensions

23

3

/4"(W) X 24

5

/8"(D) X 33

5

/8"(H)

603 mm(W) X 625 mm(D) X 854 mm(H)

Inlet water temperature 120 °F (49 °C) minimum, 149 °F (65 °C) maximum

Net weight 72 - 89 lbs. (33 - 40 kg)

13INSTALLATION

ENGLISH

Preparing Cabinet Opening

This dishwasher is designed to fit a standard

dishwasher opening. An opening may be needed

on both sides to route plumbing and electrical

connections.

• To ensure proper drainage, install the dishwasher

no more than 12 ft. (3.65 m) from the sink.

• The location must have sufficient space for the

dishwasher door to open easily and provide at

least 0.1” (2 mm) between the dishwasher and the

cabinet sides.

• If installing the dishwasher in a corner, leave a

minimum of 2” (50 mm) between the dishwasher

and the adjacent wall.

• The adjacent wall must be free of obstructions.

• For flush installations only, you may remove the

cabinet brace inside the cabinet.

1

Select a location as close to the sink as

possible for easy connections to water supply

line, drain hose and electrical connection.

22

2

To allow for proper clearance of plumbing and

electrical, use the template included with the

literature to determine the clearance on the

side of the cabinet where the cabinet meets

the back wall. Using a 2

1

/2” diameter hole saw,

drill a hole in the target area as shown on the

template.

3.5

''

2.5

''

4

''

WARNING

• Installation damage is not covered by the

warranty, and leaks caused by improper

installation may result in property damage.

• Do not use existing holes unless they are in the

target area.

• Failure to properly locate the hole for the water

and drain lines may prevent the dishwasher

from installing flush with the cabinets and could

result in kinked, pinched, crushed, stressed or

damaged lines.

14 INSTALLATION

Preparing Water and

Electrical Connections

There are 2 channels in the bottom of the dishwasher

for routing the water and electrical connections. As

shown in the bottom view below, channel is for the

water supply line, and channel is for the electrical

cable.

1

Turn off the house water supply and the circuit

breaker or dedicated power before connecting

the dishwasher.

2

Run the water supply line along the floor 6

1

/2 –

7

3

/4” (165–197 mm) from the left side of the

opening and tape it in place in front of the

opening.

3

Run the electrical cable along the floor

14–16” (356–406 mm) from the water supply line

and tape it in place.

• The electrical outlet must be within 4 ft. (1.22

m) of either side of the dishwasher.

• The best location for the electrical conduit is

on the right side of the back wall. Re-route

the electrical cable before installation if the

electrical conduit pipe is longer than 3” (76

mm) and is centered on the back wall.

WARNING

Water Connection

• Do not reuse an old hose. Use only a new hose

when installing the dishwasher. The old hose

could leak or burst causing flooding and property

damage. Contact an LG Customer Information

Center for assistance in buying a new hose.

Electrical Connection

• Use a time-delay fuse or circuit breaker.

• Operate this appliance with the correct voltage

as shown in this manual and on the rating plate.

• The wiring must be grounded properly. If in

doubt, have it checked by a qualified electrician.

• Connect the appliance using 3-wires, including a

ground wire.

• The appliance and outlet must be positioned so

that the plug is easily accessible.

• Do not use an extension cable or adapter with

this dishwasher.

• Do not overload the outlet with more than one

appliance.

• The included 16AWG wire nuts should be used.

• It is the personal responsibility and obligation

of the product owner to have a proper outlet

installed by a qualified electrician.

CAUTION

• When connecting the dishwasher water supply

line to the house water supply, sealing tape or

compound should be used on pipe threads to

avoid leaks. Tape or compound should not be

used on compression fittings.

• Connect the dishwasher to a hot water supply

with a temperature range between 120 °F (49

°C) and 149 °F (65 °C). This temperature range

provides the best washing results and shortest

cycle time. To prevent damage to dishes, the

temperature should not exceed 149 °F (65 °C).

• Water supply pressure must be between 20 psi

and 80 psi (140–550 kPa). If the water supply

pressure exceeds 80 psi, a pressure reducing

valve must be installed. Otherwise premature

failure of the inlet valve may occur.

15INSTALLATION

ENGLISH

Preparing Dishwasher

WARNING

• Do not remove safety cover . Removal can

result in fire, electric shock or death.

Releasing Drain Hose

Remove the twist tie holding the drain hose to the

back of the shipping brace.

Removable Shipping Brace

The rear shipping brace can be removed if additional

clearance is needed when installing the dishwasher

under a low countertop.

Removing Lower Cover

1

Remove the screws at either side which attach

the lower cover to the dishwasher.

2

Remove the lower cover.

3

If there is insulation padding behind the lower

cover, remove it.

4

Set the parts aside until the installation is

complete.

CAUTION

• If you lay the dishwasher on its back, do so

carefully to avoid damaging the drain hose and

the tub.

16 INSTALLATION

Removing Packing Materials from the

Interior

Remove all packing materials from the interior of the

dishwasher before installing the appliance.

2

3

Attaching Installation

Brackets

For countertops made of wood or other material

that will not be damaged by drilling, use the metal

installation brackets provided.

For countertops made of granite, marble, or other

materials that could be damaged by drilling, use the

wood screws to attach the dishwasher to the cabinet.

See installation instructions in Securing Dishwasher

to Cabinet Opening.

NOTE

• Installation brackets and screws can be found in the

silverware basket.

1

Insert the tabbed end of the installation brackets

into the slots in the upper frame. Rotate the

brackets until the tabbed ends are facing up.

2

Bend the tabs on the brackets to secure them to

the frame using a pair of needle nose pliers.

17INSTALLATION

ENGLISH

Sliding Dishwasher into

Cabinet Opening

CAUTION

• Do not pull or lift the dishwasher using the

handle . Doing so can damage the door and

hinges.

• Do not push the door of the dishwasher with

knees when sliding the dishwasher into position.

Doing so can damage the front cover.

• Do not push the top of the dishwasher. Doing so

can damage the interior of the dishwasher.

NOTE

• Open the door and grab the body frame and the

top front opening of the tub to move or lift the

dishwasher.

1

Align the dishwasher with the opening. Make

sure the water supply line and electrical cable

are in the correct positions to slide into their

channels properly.

2

Smooth out or pad the edges of the hole drilled

for the water supply to avoid damaging the drain

hose.

18 INSTALLATION

3

Make sure the drain hose is straight before

feeding the end of it through the hole for the

water supply. As you slide the dishwasher into

the opening, you will want to slowly pull on the

drain hose from inside the cabinet to take up

some slack. Be careful not to kink, pinch, crush

or stress the drain hose during installation to

avoid leaking and water damage.

4

Gradually slide the dishwasher into the opening,

making sure that the water supply line and

electrical cable are passing freely through the

channels and do not get caught under the

dishwasher.

• As you slide the dishwasher into the opening,

stop periodically (or have an assistant help)

to take up the slack by pulling the drain hose

farther into the cabinet.

CAUTION

• To avoid malfunctions or leakage, it is important

that the drain hose not get kinked, pinched,

stressed or crushed behind or under the

dishwasher or inside the neighboring cabinet.

• Damage resulting from improper installation is

not covered under the warranty.

5

Remove the tape from the water supply line and

the electrical cable.

19INSTALLATION

ENGLISH

Connecting Water Supply

Line and Power

Connecting Water Supply Line

1

With the home water supply turned off, connect

the water supply line to the inlet valve on the left

front of the dishwasher.

CAUTION

• Tape or compound should not be used on

dishwasher inlet valve.

2

Tighten the compression nut.

3

Slide the water supply line back through the

channel, pulling gently from inside the cabinet

to make sure the line is not kinked, pinched,

stressed or crushed.

Connecting Power

The dishwasher should have a dedicated properly

grounded branch circuit to connect the 3 wire setup

which includes the ground wire.

If a 3-prong power supply is used, it should be in an

accessible location adjacent to the dishwasher within

4 ft. (1.22 m) of the dishwasher side and not behind

the dishwasher.

NOTE

• The best location for the electrical conduit is on the

right side of the back wall. Re-route the electrical

cable before installation if the electrical conduit pipe

is longer than 3” (76 mm) and is centered on the

back wall.

1

Turn off electrical power to the unit at the circuit

breaker.

2

Use a Phillips screwdriver to remove the screw

from the junction box cover and remove the

cover.

3

Use a Phillips screwdriver to remove 2 screws

.

4

Remove the junction box from the appliance.

20 INSTALLATION

5

Insert a strain relief through the hole in the

junction box. Tighten the ring nut to secure it

in place.

6

Insert the electrical cable through the hole in

the strain relief. Tighten 2 screws to secure the

cable.

7

Pull the existing wires through the openings

in the junction box. Tighten 2 screws to

reassemble the junction box in the appliance.

8

Pair the white, black, and green wires to the

matching colored wires from the dishwasher.

Then twist on the provided wire nuts tightly to

connect the corresponding wires.

9

Wrap electrical tape around each connection.

10

Fold the connected wires back into the junction

box and screw on the junction box cover.

WARNING

• Verify that the black wire is hot (120 V). If not,

or if you are unsure of the power supply, have it

checked by a licensed electrician.

CAUTION

• Do not leave stripped wire exposed. Trim

stripped wire to fit completely inside wire nuts.

La page est en cours de chargement...

LG LDP6810SS Le manuel du propriétaire

Ce manuel convient également à

LG LDP6810SS Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents