VTech DS6071 Manuel utilisateur

Marque: VTech

Modèle: DS6071

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

DS6071-17

DS6071/DS6071-17

DECT 6.0 accessory handset

for use with VTech models

DS6670/DS6671/DS6672

User’s manual

Telephones identiﬁed with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of

the Telecommunications Industry Association. Used under license.

Congratulations

on purchasing your new VTech product. Before using this telephone, please read

Important safety instructions on page 5 of this manual.

This manual has instructions on how to set up and register your new handset.

For abridged instructions on using the handset, see the Abridged user’s manual

that came with your telephone base.

You may also view or download the online Complete user’s manual for a full

set of installation and operation instructions at www.vtechphones.com.

In Canada, visit www.vtechcanada.com.

Visit www.vtechphones.com.

Registration

Product news

Learn about the latest VTech products.

Compatible with

Hearing Aid T-Coil

TIA-1083

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

User’s manualHandset battery

Handset battery

compartment cover

Handset charger and

charger adapter

Handset

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

User’s manual

ECO mode

This power conserving technology reduces power

consumption for optimal battery performance.

The ECO mode activates automatically during calls.

When this mode is on, the handset displays ECO.

ECO

Home 0:00:01

10:15 PM

12/18

ECO

Battery installation

Install the battery as shown below.

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

CR1232

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

CR1232

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

CR1232

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

CR1232

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

CR1232

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

CR1232

Plug the battery connector securely

into the socket.

Place the battery with the label

THIS SIDE UP facing up and

the wires inside the battery

compartment.

Slide the battery compartment cover

towards the center of the handset until

it clicks into place.

3. Place the handset in the telephone

base or charger to charge.

CHARGE light

remains on when

charging.

If the handset will not be used for a long time, disconnect and remove the battery

to prevent possible leakage.

To purchase a replacement battery, visit our website at www.vtechphones.com

or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call

1 (800) 267-7377.

•

Battery charging

Once you have installed the battery, the screen indicates the battery status

(see the table below). For best performance, keep the handset in the telephone

base or charger when not in use. The battery is fully charged after 12 hours of

continuous charging.

Battery indicators Battery status Action

The screen is blank, or

displays Put in charger

and ﬂashes.

The battery has no or very little

charge. The handset cannot

be used.

Charge without interruption

(at least 30 minutes).

The screen displays

Low battery and ﬂashes.

The battery has enough charge

to be used for a short time.

Charge without interruption

(about 30 minutes).

The screen displays

HANDSET X.

The battery is charged. To keep the battery

charged, place it in the

telephone base or charger

when not in use.

When it is fully charged, you can expect the following performance:

Operation Operating time

While in handset use (talking*) Seven hours

While in speakerphone mode (talking*) Three hours and 30 minutes

While not in use (standby**) Five days

* Operating times vary depending on your actual use and the age of the battery.

** Handset is not charging or in use.

If you place the handset in the telephone base or charger without plugging in the

battery, the screen displays No battery.

Add and register a handset

This telephone system accommodates up to 12 devices, including a maximum of

two DECT 6.0 headsets. The telephone base recognizes and counts a headset the

same as a handset.

You can add new handsets (DS6071/DS6071-17, purchased separately) to your

telephone system. Each handset must be registered with the telephone base

before use. Additional handsets registered to the telephone base are assigned

numbers in the sequential order.

When ﬁrst purchased and properly charged, each expansion handset shows

To register HS, see manual. Charge the handset before registering it to the

telephone base.

To register a handset:

Place the new/non-registered handset in the telephone base.

The handset shows Registering... Please wait, then Handset X Registered

and you hear a beep when the registration process completes. The registration

process takes about 90 seconds to complete.

Do not place the handset

in the charger.

Deregister handsets

If you want to replace a handset or reassign the designated handset number of

a registered handset, you must deregister all devices, including all handsets and

headsets. Then individually register each device again.

To deregister all devices:

Press and hold FIND HANDSET on the telephone base for about 10 seconds

until the IN USE light on the telephone base turns on and starts ﬂashing.

Immediately press FIND HANDSET again. You must press FIND HANDSET

while the IN USE light is still ﬂashing. The IN USE light ﬂashes for approximately

ﬁve seconds.

All handsets show To register HS, see manual. when the deregistration process

completes. The deregistration process takes about 10 seconds to complete.

Handset overview

VOLUME/ /CID

/HOME/FLASH

MUTE/DELETE

CHARGE light

Dialing keys

VOLUME/ /

MENU/SELECT

OFF/CANCEL

REDIAL/PAUSE

CELL 1

HOLD

/auA

CELL 2

PUSH TO TALK

Important safety instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the

risk of ﬁre, electric shock and injury, including the following:

Read and understand all instructions.

Follow all warnings and instructions marked on the product.

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a

damp cloth for cleaning.

Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or

swimming pool, or in a wet basement or shower.

Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other

electrical devices. Protect your phone from moisture, dust, corrosive liquids and fumes.

Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To

protect them from overheating, these openings must not be blocked by placing the product on a soft surface

such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This

product should not be placed in any area where proper ventilation is not provided.

This product should be operated only from the type of power source indicated on the marking label. If you are

not sure of the type of power supply in your home or ofﬁce, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not install this product where the cord may be

walked on.

Never push objects of any kind into this product through the slots in the telephone base or handset

because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any

kind on the product.

To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized

service facility. Opening or removing parts of the telephone base or handset other than speciﬁed

access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

Do not overload wall outlets and extension cords.

Unplug this product from the wall outlet and refer servicing to an authorized service facility under the

following conditions:

When the power supply cord or plug is damaged or frayed.

If liquid has been spilled onto the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operation instructions. Improper adjustment of other controls may result

in damage and often requires extensive work by an authorized technician to restore the product to

normal operation.

10.

11.

12.

13.

•

If the product has been dropped and the telephone base and/or handset has been damaged.

If the product exhibits a distinct change in performance.

14. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of

electric shock from lightning.

15. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or when the handset is

replaced in its cradle. This is a common event associated with the closing of any electrical circuit.

The user should not plug the phone into a power outlet, and should not put a charged handset into

the cradle, if the phone is located in an environment containing concentrations of ﬂammable or

ﬂame-supporting gases, unless there is adequate ventilation. A spark in such an environment could

create a ﬁre or explosion. Such environments might include: medical use of oxygen without adequate

ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.

16. Only put the handset of your telephone next to your ear when it is in normal talk mode.

17. The power adapter is intended to be correctly oriented in a vertical or ﬂoor mount position. The prongs

are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

SAVE THESE INSTRUCTIONS

Battery

CAUTION: Use Only Supplied Battery.

Do not dispose of the battery in a fire. Check with local waste management codes for special disposal

instructions.

Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the

eyes or skin. The electrolyte may be toxic if swallowed.

Exercise care in handling batteries in order not to create a short circuit with conductive materials.

Charge the battery provided with this product only in accordance with the instructions and limitations

specified in this manual.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation

of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by

the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at least six inches from the pacemaker.

Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it

is turned ON.

Should use the wireless telephone at the ear opposite the pacemaker. WTR’s evaluation did not identify

any risk to bystanders with pacemakers from other persons using wireless telephones.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using

wireless telephones.

Operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications Commission

(FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary

with the locations of the telephone base and handset, the weather, and the layout of your home or ofﬁce.

When the handset is out of range, the handset displays Out of range OR Base no power.

If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect

well when you press /HOME. Move closer to the telephone base, then press /HOME to answer the call.

If the handset moves out of range during a telephone conversation, there may be interference. To improve

reception, move closer to the telephone base.

Maintenance

Taking care of your telephone

Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the original packing materials to protect your telephone if you ever need

to ship it.

Avoid water

Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with

wet hands. Do not install the telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety,

take caution when using electrical appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft

cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind.

About cordless telephones

Privacy: The same features that make a cordless telephone convenient create some limitations.

Telephone calls are transmitted between the telephone base and the cordless handset by radio

waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio

receiving equipment within range of the cordless handset. For this reason, you should not think of

cordless telephone conversations as being as private as those on corded telephones.

Electrical power: The telephone base of this cordless telephone must be connected to a working

electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made

from the cordless handset if the telephone base is unplugged, switched off or if the electrical power

is interrupted.

Potential TV interference: Some cordless telephones operate at frequencies that may cause

interference to televisions and VCRs. To minimize or prevent such interference, do not place the

telephone base of the cordless telephone near or on top of a TV or VCR. If interference is

experienced, moving the cordless telephone farther away from the TV or VCR often reduces or

eliminates the interference.

Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with

conducting material such as rings, bracelets and keys. The battery or conductor may overheat and

cause harm. Observe proper polarity between the battery and the battery charger.

•

Remember that electrical appliances can cause serious injury if used when you are wet or standing in

water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE

POWER CORD AND TELEPHONE LINE CORD FROM THE WALL. Then remove the telephone by the

unplugged cords.

Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not

burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release

caustic material which could cause injury.

The RBRC

seal

The RBRC

seal on the nickel-metal hydride battery indicates that VTech Communications, Inc.

is voluntarily participating in an industry program to collect and recycle these batteries at the

end of their useful lives, when taken out of service within the United States and Canada.

The RBRC

program provides a convenient alternative to placing used nickel-metal hydride

batteries into the trash or municipal waste, which may be illegal in your area.

VTech’s participation in RBRC

makes it easy for you to drop off the spent battery at local

retailers participating in the RBRC

program or at authorized VTech product service centers.

Please call 1 (800) 8 BATTERY

for information on Ni-MH battery recycling and disposal

bans/restrictions in your area.

VTech’s involvement in this program is part of its commitment to protecting our environment

and conserving natural resources.

RBRC

and 1 (800) 8 BATTERY

are registered trademarks of Rechargeable Battery

Recycling Corporation.

FCC, ACTA and IC regulations

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device under

Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations to this equipment not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. Privacy of communications may not be ensured when

using this telephone.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can

be safely absorbed by a user or bystander according to the intended usage of the product. This product has

been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the

user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are

maintained at a distance of approximately 20 cm (8 inches) or more.

This Class B digital apparatus complies with Canadian ICES-003.

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the

Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment

contains, among other things, a product identiﬁer in the format US:AAAEQ##TXXXX. This identiﬁer must be

provided to your telephone service provider upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply

with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and

modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is

also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two

lines. See the installation instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your

telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th

characters following the US: in the product identiﬁer (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the

sum of all RENs should be ﬁve (5.0) or less. For more information, please contact your telephone service provider.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected

to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have

questions about what will disable alarm equipment, consult your telephone service provider or a qualiﬁed installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been

corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents.

For repair procedures, follow the instructions outlined under the Limited warranty.

If this equipment is causing harm to the telephone network, the telephone service provider may temporarily

discontinue your telephone service. The telephone service provider is required to notify you before interrupting

service. If advance notice is not practical, you will be notiﬁed as soon as possible. You will be given the

opportunity to correct the problem and the telephone service provider is required to inform you of your right to

ﬁle a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment,

operation, or procedures that could affect the proper functioning of this product. The telephone service provider is

required to notify you if such changes are planned.

If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

If this product has memory dialing locations, you may choose to store emergency telephone numbers

(e.g., police, ﬁre, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and brieﬂy explain the reason for the call before hanging up.

Perform such activities in off-peak hours, such as early morning or late evening.

Industry Canada

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference, including interference that may cause undesired operation.

The term ‘’IC:‘’ before the certiﬁcation/registration number only signiﬁes that the Industry Canada technical

speciﬁcations were met.

The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the

maximum number of devices allowed to be connected to a telephone interface. The termination on an interface

may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the

devices does not exceed ﬁve.

This product meets the applicable Industry Canada technical speciﬁcations.

•

California Energy Commission battery charging testing instructions

This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are

intended for California Energy Commission (CEC) compliance testing only.

When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled.

When first purchased and properly installed for charging (see Battery installation on page 2), put the handset on the

charger to charge. The CEC battery charging testing mode is activated while charging.

If you have registered the handset to a telephone base, below are the testing instructions.

To activate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged

batteries before proceeding.

2. While you press and hold FIND HANDSET, plug the telephone base power adapter back to the power outlet.

3. After about 20 seconds, when the IN USE light starts ﬂashing, release FIND HANDSET and then press it again within

2 seconds.

When the phone successfully enters the CEC battery charging testing mode, the IN USE light turns off and all handsets

display To register, see manual.

When the phone fails to enter this mode, repeat Step 1 through Step 3 above.

Note: The telephone base will be powered up as normal if you fail to press FIND HANDSET within 2 seconds in Step 3.

To deactivate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet, then plug it back in. Then the telephone base is

powered up as normal.

2. Register your handsets back to the telephone base. See page 3 for handset registration instructions.

For C-UL compliance only

Mesures de sécurité importantes

Aﬁn de réduire les risques d’incendie, de blessures corporelles ou d’électrocution, suivez toujours ces mesures

préventives de base lorsque vous utilisez votre téléphone :

Lisez et comprenez bien toutes les instructions.

Observez toutes les instructions et mises en garde inscrites sur l’appareil.

Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez pas de nettoyeurs liquides ni en

aérosol. N’utilisez qu’un chiffon doux et légèrement humecté.

N’utilisez pas ce produit près de l’eau, tel que près d’un bain, d’un lavabo, d’un évier de cuisine, d’un bac de

lavage ou d’une piscine, ou dans un sous-sol humide ou sous la douche.

Ne déposez pas ce téléphone sur un chariot, support ou table chancelants. L’appareil pourrait tomber et être

sérieusement endommagé.

Évitez d’installer le système téléphonique dans les endroits soumis à une température extrême, à la lumière

directe du soleil ou à proximité immédiate d’autres appareils électriques ou électroniques. Protégez votre

téléphone contre les sources d’humidité, la poussière, les vapeurs et les liquides corrosifs.

Le boîtier de l’appareil est doté de fentes et d’ouvertures d’aération situées à l’arrière ou en dessous. Aﬁn

d’empêcher la surchauffe, ces ouvertures ne doivent pas être obstruées en plaçant l’appareil sur un lit, divan,

tapis ou autre surface similaires. Ne placez pas cet appareil à proximité d’un élément de chauffage ni d’une

plinthe électrique. De plus, ne l’installez pas dans une unité murale ou un cabinet fermé qui ne possède pas

d’aération adéquate.

Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur les étiquettes de l’appareil. Si vous ne

connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur d’électricité.

Ne déposez rien sur le cordon d’alimentation. Installez cet appareil dans un endroit sécuritaire, là où personne

ne pourra trébucher sur la ligne d’alimentation ni le cordon téléphonique modulaire.

N’insérez jamais d’objets à travers les fentes et ouvertures de cet appareil, car ils pourraient toucher à

des points de tension dangereux ou court-circuiter des pièces, ce qui constituerait un risque d’incendie ou

d’électrocution. N’échappez pas de liquides dans l’appareil.

Aﬁn de réduire les risques d’électrocution, ne démontez pas l’appareil, mais apportez-le plutôt à un centre de

service qualiﬁé s’il doit être réparé. En enlevant le couvercle, vous vous exposez à des tensions dangereuses ou

autres dangers similaires. Un remontage inadéquat peut être à l’origine d’une électrocution lors d’une utilisation

ultérieure de l’appareil. Débranchez l’appareil avant de procéder au nettoyage. Utilisez un chiffon humide et doux.

Ne surchargez pas les prises de courant et les rallonges.

Débranchez cet appareil de la prise de courant et communiquez avec le département de service à la clientèle

de VTech dans les cas suivants:

Lorsque le cordon d’alimentation est endommagé ou écorché.

Si du liquide a été échappé dans l’appareil.

Si l’appareil a été exposé à une source d’humidité telle que la pluie ou l’eau.

Si le produit ne fonctionne pas normalement en respectant les instructions de fonctionnement. Réglez

uniquement les commandes indiquées dans le les instructions de fonctionnement. Les réglages incorrects

des autres commandes pourraient provoquer un dommage qui pourrait exiger un travail exhaustif de la

part d’un technicien autorisé aﬁn de rétablir le fonctionnement normal de l’appareil.

Si le produit a été échappé et que le socle et/ou le combiné a été endommagé.

Si le produit afﬁche une nette diminution de sa performance.

14. Évitez d’utiliser un téléphone (autre qu’un sans ﬁl) pendant un orage. Les éclairs peuvent être à l’origine d’une

électrocution.

15. N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de la fuite. En certaines circonstances,

une ﬂammèche pourrait être provoquée lorsque l’adaptateur est branché à une prise de courant, ou lorsque

le combiné est déposé sur le socle. Ceci est un événement commun associé à la fermeture d’un circuit

électrique. L’utilisateur ne devrait pas brancher le téléphone à une prise de courant, et ne devrait pas

déposer le combiné chargé sur le socle, si le téléphone se trouve à proximité d’un endroit comportant des

concentrations de gaz inﬂammables, à moins que la ventilation soit adéquate. Une ﬂammèche dans un tel

endroit pourrait provoquer un incendie ou une explosion. De tels environnements peuvent comprendre: des

endroits où l’on utilise de l’oxygène médical sans ventilation adéquate; des gaz industriels (dissolvants de

nettoyage, des vapeurs d’essence, etc.); une fuite de gaz naturel, etc.

16. Ne placez que le combiné de votre téléphone près de votre oreille lorsqu’en mode de conversation.

17. Ces adaptateurs ont été conçus pour être orientés en position verticale ou montés au sol. Les broches ne

sont pas conçues pour maintenir l’adaptateur en place si celui-ci est barnché dans une prise au plafond ou

sous une table/ armoire.

CONSERVEZ CES INSTRUCTIONS

Pile

MISE EN GARDE : Risque d’explosion si la pile est remplacée par une pile de types incorrects. Jetez les piles

épuisées en respectant les instructions.

Ne jetez pas la pile au feu. Vérifiez les instructions spécifiques de mise aux rebus aupr

s des autorités locales.

N’ouvrez pas et ne mutilez pas la pile. L’électrolyte qui s’en échapperait est corrosif et pourrait causer des brûlures

ou des blessures aux yeux ou à la peau. L’électrolyte est toxique si avalé.

Soyez prudents lorsque vous manipulez les piles afin d’éviter les courts-circuits provoqués par des matériaux

conducteurs.

Rechargez la pile incluse avec cet appareil, selon les instructions et limites spécifiées dans ce guide d’utilisation.

Stimulateurs cardiaques implantés dans l’organisme

Les simulateurs cardiaques (s’applique uniquement aux téléphones numériques sans fil):

L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une

évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques

implantés dans l’organisme. Appuyée par l’Administration des aliments et drogues (FDA) des États-Unis, la firme WTR

recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

Ils doivent tenir le téléphone sans fil à une distance d’au moins six pouces du stimulateur cardiaque.

Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de

chemise, lorsque celui-ci est en marche.

Ils doivent utiliser le téléphone sans fil en l’appuyant sur l’oreille qui se trouve dans la direction opposée au

stimulateur cardiaque.

L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs cardiaques

causés par les gens qui utilisent un téléphone sans fil à proximité de ceux-ci.

10.

11.

12.

13.

•

À propos des téléphones sans fil

Alimentation électrique: Les mêmes caractéristiques qui constituent des avantages pour les téléphones sans fil

affichent également des restrictions. Les appels téléphoniques sont transmis entre le combiné sans fil et le socle par

le biais d’ondes radio ; il y a donc la possibilité que vos conversations téléphoniques sans fil soient interceptées par

des équipements de réception radio se trouvant dans la portée du combiné sans fil. Pour cette raison, vous ne devez

pas percevoir les communications téléphoniques sans fil comme étant aussi confidentielles.

Alimentation électrique: Le socle de ce téléphone sans fil doit être branché à une prise électrique fonctionnelle.

La prise électrique ne doit pas être contrôlée par un interrupteur mural. Les appels ne pourront pas être effectués

du combiné sans fil si le socle est débranché ou mis hors tension ou si le courant est coupé.

Possibilité d’interférences aux téléviseurs: Certains téléphones sans fil fonctionnent sur des fréquences pouvant

causer des interférences aux téléviseurs et aux magnétoscopes. Pour réduire ou prévenir de telles interférences, ne

placez pas le socle du téléphone sans fil près ou sur un téléviseur ou magnétoscope. S’il y a présence de parasites,

il est conseillé d’éloigner le téléphone sans fil du téléviseur ou du magnétoscope afin de réduire possiblement les

interférences.

Piles rechargeables: Manipulez les piles avec soin afin de ne pas les court-circuiter avec des bagues, bracelets

ou clés. Les piles ou le conducteur peut surchauffer et causer des blessures. Respectez la polarité adéquate entre

la pile et le chargeur.

Les bloc-piles rechargeables à l’hydrure métallique de nickel: Jetez ces blocs-piles de manière écologique et

sécuritaire. Ne les incinérez pas et ne les percez pas. Tel que les autres piles de ce type, elles pourraient dégager

une matière toxique qui peut causer des blessures corporelles si elles sont brûlées ou percées.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”)

that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and

workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with

the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and

used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the limited

warranty period (“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option,

without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement

parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar

design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option,

is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You

should expect the repair or replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or

replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the

repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is

shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation,

abnormal operation or handling, neglect, inundation, ﬁre, water or other liquid intrusion; or

2. Product that has been damaged due to repair, alteration or modiﬁcation by anyone other than an authorized service

representative of VTech; or

3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or

antenna systems; or

4. Product to the extent that the problem is caused by use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been

removed, altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or

used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or

7. Product returned without a valid proof of purchase (see item 2 below); or

8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the

unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may

save you a service call.

Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are

responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech

will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are

prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this

limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will

request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and

return shipping costs for the repair of Products that are not covered by this limited warranty.

What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along with a

description of the malfunction or difﬁculty; and

2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of

purchase or receipt; and

3. Provide your name, complete and correct mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral

communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively

describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is

authorized to make modiﬁcations to this limited warranty and you should not rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives you speciﬁc legal rights, and you may also have other rights, which

vary from state to state or province to province.

Limitations: Implied warranties, including those of ﬁtness for a particular purpose and merchantability (an unwritten

warranty that the Product is ﬁt for ordinary use) are limited to one year from the date of purchase. Some states/

provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but

not limited to lost proﬁts or revenue, inability to use the Product or other associated equipment, the cost of substitute

equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to

you.

Please retain your original sales receipt as proof of purchase.

•

The Bluetooth

word mark and logos are owned by Bluetooth SIG, Inc.

and any use of such marks by VTech Holdings Limited is under license.

VTech Holdings Limited is a member of Bluetooth SIG, Inc.

Other trademarks and trade names are those of their respective owners.

VTech Communications, Inc.

A member of THE VTECH GROUP OF COMPANIES.

VTech is a registered trademark of VTech Holdings Limited.

Speciﬁcations are subject to change without notice.

Document order number: 91-006717-050-100

Designed to ﬁt your home.

And your life.

Technical specifications

Frequency control Crystal controlled PLL synthesizer

Transmit frequency 1921.536-1928.448 MHz

Channels 5

Nominal effective range Maximum power allowed by FCC and IC. Actual operating

range may vary according to environment conditions at the

time of use.

Power requirements Handset: 2.4V Ni-MH battery

Charger: 6V AC @ 300mA

Memory Home phonebook:

200 memory locations; up to 30 digits and 15 characters

Cell phonebooks:

1000 memory locations (each); up to 30 digits and 15 characters

Caller ID log:

50 memory locations; up to 24 digits and 15 characters

VTech DS6071 Manuel utilisateur

Marque: VTech

Modèle: DS6071

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

DS6071-17

Télécharger le PDF

rapport

dans d''autres langues

English: VTech DS6071 User manual

VTech DS6071 Manuel utilisateur

Ce manuel convient également à

VTech DS6071 Manuel utilisateur

dans d''autres langues

Documents connexes