VTech LS6195-17 Manuel utilisateur

Complete user’s manual

w w w.v te c h pho ne s.c om

Models: LS6195/

LS6195-13/LS6195-15/

LS6195-16/LS6195-17

BC

Congratulations

on purchasing your new VTech product. Before using this telephone, please read

Important safety instructions on page 68 of this manual.

This manual has all the feature operations and troubleshooting necessary to install

and operate your new VTech telephone. Please review this manual thoroughly to

ensure proper installation and operation of this innovative and feature rich VTech

product. For support, shopping, and everything new at VTech, visit our website at

www.vtechphones.com. In Canada, please visit www.vtechcanada.com.

The ENERGY STAR

®

program (www.energystar.gov) recognizes

and encourages the use of products that save energy and help

protect our environment. We are proud to mark this product with

the ENERGY STAR

®

label indicating it meets the latest energy

efficiency guidelines.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identified with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of

the Telecommunications Industry Association. Used under license.

Register online to get an additional 3-month warranty!

Visit www.vtechphones.com.

Registration

Register your product online for enhanced

warranty support.

Product news

Learn about the latest VTech products.

i

Table of contents

Getting started .............................1

Parts checklist .................................... 1

Telephone base installation ................ 2

Handset battery installation ................ 3

Handset battery charging ................... 4

Telephone base layout ....................... 5

Handset layout ................................... 8

Using the menu ................................ 10

Telephone base settings ..........11

Handset ringer volume ......................11

Telephone base ringer volume ..........11

Ringer tone ........................................11

Quiet mode ....................................... 12

Set date and time ............................. 13

LCD language .................................. 14

Base LCD language ......................... 14

Voicemail number ............................. 15

Clear voicemail indicators ................ 16

Key tone ........................................... 16

Home area code ............................... 17

Dial mode ......................................... 17

Auto answer ..................................... 18

Telephone operation .................19

Make a call ....................................... 19

Predial a call ..................................... 19

Answer a call .................................... 20

End a call .......................................... 20

Handset speakerphone .................... 20

Volume control.................................. 20

Mute ................................................. 21

Call waiting ....................................... 21

Temporary ringer silencing ............... 21

Temporary tone dialing ..................... 22

Chain dialing ..................................... 22

Check voicemail ............................... 23

Find handset..................................... 23

Website ............................................ 23

Redial ............................................... 24

Transfer a call ................................... 25

Multiple handset use .................26

Join a call in progress ...................... 26

Intercom ........................................... 27

Answer an incoming call during an

intercom call .................................. 27

Call transfer using intercom ............. 28

Directory .....................................29

About the directory ........................... 29

Add a directory entry ........................ 30

Review directory entries ................... 32

Alphabetical search .......................... 32

Dial a directory entry ........................ 33

Edit a directory entry ........................ 33

Delete a directory entry .................... 34

Speed Dial ........................................ 35

Assign a speed dial slot ................... 35

Reassign a speed dial slot ............... 35

Dial a speed dial number ................. 36

Delete a speed dial entry ................. 36

Caller ID ......................................37

About caller ID .................................. 37

Information about caller ID with

call waiting .................................... 37

Caller ID log ...................................... 38

Memory match.................................. 38

Missed call indicator ......................... 39

Review the caller ID log ................... 39

View dialing options ......................... 40

Dial a caller ID log entry ................... 41

Save a caller ID log entry to the

directory ........................................ 41

Delete caller ID log entries ............... 42

Caller ID log screen messages ........ 42

Answering system settings......43

Answering system ............................ 43

Announcement ................................. 43

Record your own announcement ..... 43

Play your announcement ................. 43

Delete your announcement .............. 44

Answer on/off ................................... 44

Call screening................................... 45

Number of rings ................................ 45

Remote access code ........................ 46

ii

Message alert tone ........................... 46

Recording time ................................. 47

Answering system operation ...48

Answering system and voicemail ..... 48

Using the answering system and

voicemail together ......................... 48

Message capacity ............................ 49

New message indication .................. 49

Call screening................................... 49

Call intercept .................................... 50

Temporarily turn off the message

alert tone ....................................... 50

Message playback ........................... 51

Delete all old messages ................... 52

Record, play and delete memos ...... 52

Remote access ................................ 53

Appendix ....................................54

Expand your telephone system ........ 54

Add and register a handset .............. 54

Deregister handsets ......................... 55

Screen messages ............................ 56

Handset and telephone base

indicators ....................................... 58

Troubleshooting ................................ 59

Important safety instructions ............ 67

Battery .............................................. 68

Precautions for users of implanted

cardiac pacemakers ...................... 68

Operating range ............................... 68

ECO mode ........................................ 68

Maintenance ..................................... 69

About cordless telephones ............... 69

The RBRC

®

seal ............................... 70

FCC, ACTA and IC regulations ........ 71

California Energy Commission

battery charging testing

instructions .................................... 73

For C-UL compliance only ................ 74

Limited warranty ............................... 77

Technical specifications .................... 79

Index ...........................................80

Table of contents

1

To purchase replacement batteries or power adapters, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or dial 1 (800) 267-7377.

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in case it is necessary to ship your telephone for warranty service.

Abridged user’s manual

Quick start guide

Telephone base

Telephone base power adapter

Telephone line cord

Battery compartment cover

Handset

Getting started

Battery

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Abridged user’s manual

Quick start guide

Getting started

2

Telephone base installation

Install the telephone base as shown below.

Make sure that the electrical outlet is not controlled by a wall switch.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through

your telephone line, you must install a DSL filter between the telephone line cord

and the telephone wall jack. The filter prevents noise and caller ID problems caused

by DSL interference. Contact your DSL service provider for more information about

DSL filters.

Telephone base

A DSL filter (not included)

is required if you have DSL

high-speed Internet service.

The DSL filter must be

plugged into the telephone

wall jack.

Electrical outlet

not controlled by

a wall switch

Telephone wall jack

Telephone base

power adapter

Telephone line cord

Getting started

3

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

CHARGE light

remains on

when charging.

If the handset will not be used for a long time, disconnect and remove the battery

to prevent possible leakage.

To purchase replacement batteries, visit our website at www.vtechphones.com

or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial

1 (800) 267-7377.

•

Handset battery installation

Install the battery as shown below.

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Insert the battery connector

securely into the socket, matching

the color-coded label.

1. Place the battery with the label

THIS SIDE UP facing up and the wires

inside the battery compartment.

2.

Align the cover flat against the

battery compartment, then slide it

towards the center of the handset

until it clicks into place.

3. Charge the handset by placing it in the

telephone base. The CHARGE light is

on when the handset is charging.

4.

Getting started

4

Handset battery charging

Once you have installed the battery, the screen indicates the battery status (see the

table below).

For best performance, keep the handset in the telephone base when not

in use.

The battery is fully charged after 11 hours of continuous charging.

If you place the handset in the telephone base without installing a battery,

the screen displays No battery.

Battery indicators Battery status Action

The screen is blank, or

displays Put in charger and

flashes.

The battery has no or very

little charge. The handset

cannot be used.

Charge without interruption

(about 30 minutes).

The screen displays

Low battery and flashes.

The battery has enough

charge to be used for a

short time.

Charge without interruption

(about 30 minutes).

The screen displays

HANDSET X.

The battery is charged. To keep the battery charged,

place it in the telephone

base when not in use.

When it is fully charged, you can expect the following performance:

Operation Operating time

While in handset use (talking*) Up to seven hours

While in speakerphone mode (talking*) Up to three hours

While not in use (standby**) Up to five days

* Operating times vary depending on your actual use and the age of the battery.

** Handset is not charging or in use.

•

After you install your telephone or power returns following a

power outage, the handset will prompt you to set the date and

time. For instructions, see Set date and time on page 13.

To skip setting the date and time, press OFF/CANCEL.

Date: MM/DD/YY

ANS ON

ECO

Getting started

5

Telephone base layout

3x

Press to delete the playing message

(page 51).

•

4

Press to repeat the playing

message (page 51).

Press twice to play the

previous message

(page 51).

•

Tap to play messages (page 51).

Tap to stop playing messages

(page 51).

•

2

Press to skip to the next message

(page 51).

•

/VOL+

Tap to increase the listening volume

during a call or message playback

(page 20 or page 51).

Tap to increase the telephone base

ringer volume when the phone is not

in use (page 11).

Tap to scroll up while in the directory

or caller ID log (page 32 or page 39).

•

Press to make, answer or end a call

using the telephone base (pages 19

and 20).

•

Dialing keys (0-9, & )

Press to enter numbers or characters.

Press to answer an incoming call

(page 20).

•

/VOL-

Tap to decrease the listening volume

during a call or message playback

(page 20 or page 51).

Tap to decrease the telephone base

ringer volume when the phone is not in

use (page 11).

Tap to scroll down while in the

directory or caller ID log (page 32 or

page 39).

Tap to delete digits while predialing

(page 19).

•

Getting started

6

Telephone base layout

CID/FLASH

Tap to review the caller ID log when

the phone is not in use (page 39).

When the telephone base is in the

caller ID log, tap to return to idle mode.

Tap to answer another incoming call

during a call (page 21).

•

/MUTE

Tap to review the directory when the

phone is not in use (page 32).

When the telephone base is in the

directory, tap to return to idle mode.

During a call, tap to mute the

microphone (page 21).

While the phone is ringing,

tap to silence the ringer

temporarily (page 21).

•

CHARGE light

On when the handset is

charging in the telephone base

(page 3).

•

1

While reviewing a caller ID

log entry, press repeatedly

to add or remove 1 in front

of the telephone number

before dialing or saving it in

the directory (page 40).

Press and hold to set or

dial your voicemail number

(pages 15 and 23).

•

Press to switch to tone dialing

during a call if you have pulse

service (page 22).

•

Press repeatedly to

show other dialing

options when

reviewing a caller ID

log entry (page 40).

•

Getting started

7

Telephone base layout

/FIND HANDSET

Press to page the system handset

(page 23).

•

Bottom of the telephone base

Getting started

8

Handset layout

/ /VOLUME

Press to review the directory when the phone is not in

use (page 32).

Press to scroll up while in a menu, or in the directory,

caller ID log or redial list.

While entering names or numbers, press to move the

cursor to the right.

During a call or message playback, press to increase the

listening volume (page 20 or page 51).

REDIAL/PAUSE

Press repeatedly to view the last 10 numbers dialed

(page 24).

While entering numbers, press and hold to insert a

dialing pause (pages 19, 30 and 33).

/FLASH

Press to make or answer a call (page 19 or page 20).

During a call, press to answer an incoming call when you

receive a call waiting alert (page 21).

1/

While reviewing a caller ID log entry, press repeatedly to

add or remove 1 in front of the telephone number before

dialing or saving it in the directory (page 40).

Press and hold to set or dial your voicemail number

(pages 15 and 23).

Dialing keys (0-9, & )

Press to enter numbers or characters.

Press to answer an incoming call (page 20).

Press to switch to tone dialing during a call if you have

pulse service (page 22).

Press to make or answer a call using the handset

speakerphone (pages 19 and 20).

During a call, press to switch between the handset

speakerphone and the handset earpiece (page 20).

•

Getting started

9

Handset layout

CID/ /VOLUME

Press to review the caller ID log when the phone is not

in use (page 39).

Press to scroll down while in a menu, or in the directory,

caller ID log or redial list.

While entering names or numbers, press to move the

cursor to the left.

During a call or message playback, press to decrease

the listening volume (page 20 or page 51).

MENU/SELECT

Press to show the menu (page 10).

While in the menu, press to select an item or save an

entry or setting.

OFF/CANCEL

During a call, press to hang up (page 20).

While in a menu, press to return to the previous menu,

or press and hold to return to idle mode, without

making changes.

Press to delete digits while predialing (page 19).

While the phone is ringing, press to silence the ringer

temporarily (page 21).

Press and hold to erase the missed call indicator when

the phone is not in use (page 39).

Press repeatedly to display other dialing options when

reviewing a caller ID log entry (page 40).

Press and hold to set and turn on the quiet mode, or

turn it off (page 12).

INT

Press to start an intercom conversation or transfer a call

(page 27 or page 28).

MUTE/DELETE

During a call, press to mute the microphone (page 21).

While the phone is ringing, press to silence the ringer

temporarily (page 21).

While reviewing the redial list, directory or caller ID log,

press to delete an individual entry (page 24, page 34

and page 42 respectively).

While entering names or numbers, press to delete digits

or characters (page 19).

•

Getting started

10

Using the menu

You can use the cordless handset to change your telephone settings.

In the ringers menu, you can select the ringer tones and adjust the ringer volume

for incoming calls.

In the settings menu, you can change the settings for LCD language, voicemail

number, voicemail indicators, key tone, home area code, dial mode and

auto answer.

Go to Answering system settings starting on page 43 for instructions on how to

modify the answering system settings.

To enter the handset menu:

Press MENU when the phone is not in use.

Press or until the screen displays the desired

feature menu.

Press SELECT to enter that menu.

To return to the previous menu, press CANCEL.

To return to idle mode, press and hold CANCEL.

1.

2.

3.

•

11

Handset ringer volume

You can set the ringer volume or turn the ringer off on each handset. When the

ringer is off, the handset displays and Ringer off.

Press MENU when the handset is not in use.

Press or to scroll to Ringers, then press SELECT.

Press SELECT to choose Ringer volume.

Press or to sample each volume level.

Press SELECT to save your selection and return to the

previous menu. You hear a confirmation tone.

The ringer volume also determines the ringer volume for

intercom calls. When the ringer is set to off, that handset is

silenced for all incoming calls except paging tone.

Telephone base ringer volume

Tap q/VOL- or p/VOL+ on the telephone base to adjust

the ringer volume when the phone is not in use.

When you set the ringer volume to zero, the base ringer is

off and the system announces, “Base ringer is off.” and the

telephone base displays Ringer off.

Ringer tone

You can choose from different ringer tones for

each handset.

Press MENU when the handset is not in use.

Press or to scroll to Ringers, then press SELECT.

Press or to scroll to Ringer tone, then press SELECT.

Press or to sample each ringer tone.

Press SELECT to save your selection and return to the

previous menu. You hear a confirmation tone.

If you turn off the ringer volume, you will not hear ringer

tone samples.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

Ringers

ANS ON

ECO

Ringer volume

ANS ON

ECO

Volume:

ANS ON

ECO

Ringer tone

ANS ON

ECO

Tone: 1

ANS ON

ECO

ANS

ON

Volume:

10:01

AM

9

12/08

Telephone base settings

12

Telephone settings

Quiet mode

You can turn on the quiet mode for a period of time (1-12 hours). During this period,

all tones (except paging tone) and call screening are muted.

When you turn on the quiet mode, the answering system turns on automatically.

When the quiet mode duration expires, the answering system remains on.

To set the quiet mode duration:

Press and hold when the handset is not in use.

The handset displays Quiet: __ hours. Use the dialing keys

to enter the desired duration (01-12).

Press SELECT to confirm and return to idle. You hear

a confirmation tone. The handset displays Quiet mode on,

ANS ON and . The telephone base displays Quiet mode

on and ANS ON.

To turn off the quiet mode:

Press and hold when the handset is not in use. The handset

displays Quiet mode off briefly and then returns to idle.

If you change the settings of the ringer tone, handset ringer

volume or telephone base ringer volume while the quiet mode

is on, you can still hear the samples of them.

1.

2.

3.

•

Quiet: __ hours

[ 1-12 ]

ECO

Quiet: 10 hours

[ 1-12 ]

ECO

Quiet mode on

10:01

AM

ANS ON

ECO

08/20

13

Telephone settings

Set date and time

The answering system announces the date and time of each message prior to

playing it. Before using the answering system, set the date and time as follows. If

you subscribe to caller ID service, the day, month and time are set automatically

with each incoming call. However, the year must be correct so that the day of the

week can be calculated from the caller ID information.

Press MENU when the handset is not in use.

Press or to scroll to Set date/time, then press SELECT.

Press or to select the month then press SELECT, or use

the dialing keys to enter a two-digit number (01-12).

Press or to select the date then press SELECT, or use

the dialing keys to enter a two-digit number (01-31).

Press or to select the year then press SELECT, or use

the dialing keys to enter a two-digit number (00-99) then

press SELECT.

Press or to select the hour then press SELECT, or use

the dialing keys to enter a two-digit number (01-12).

Press or to select the minute then press SELECT, or use

the dialing keys to enter a two-digit number (00-59).

Press or to select AM or PM.

Press SELECT to save the settings and return to the previous menu. You hear a

confirmation tone.

If the date and time are not set when a message is recorded, the system

announces, “Time and date not set,” before each message plays.

The telephone plays two beeps if you enter an invalid number.

1.

2.

3.

4.

5.

6.

7.

8.

9.

•

Set date/time

ANS ON

ECO

Date: MM/DD/YY

ANS ON

ECO

Time: HH/MM --

ANS ON

ECO

14

Telephone settings

LCD language

You can select a language (English, French or Spanish) to be used in all handset

screen displays.

Press MENU when the handset is not in use.

Press or to scroll to Settings, then press SELECT.

Press SELECT to select LCD language.

Press or to scroll to English, Français or Español

then press SELECT.

The handset displays Set English? when you

select English.

The handset displays Set Francais? when you

select Français.

The handset displays Set Espanol? when you

select Español.

Press SELECT to your selection. Then the handset returns to

the previous menu. You hear a confirmation tone.

If you accidentally set the LCD language to Spanish or French, press MENU and

then enter 364 on the handset when not in use.

If you accidentally set the LCD language to Spanish or French while the

handset is on a call, press MENU and then enter 364 . Then press OFF to

exit the menu.

Base LCD language

You can select a language (English, French or Spanish) to be used in the

telephone base screen displays.

Press MENU when the telephone base is not in use.

Press or to scroll to Settings, then press SELECT.

Press or to scroll to Base LCD lang, then press SELECT.

Press or to scroll to English, Français or Español then

press SELECT.

The handset displays Set English? when you

select English.

The handset displays Set Francais? when you

select Français.

The handset displays Set Espanol? when you

select Español.

Press SELECT to your selection. Then the handset returns to

the previous menu. You hear a confirmation tone.

1.

2.

3.

4.

•

5.

•

1.

2.

3.

4.

•

5.

Settings

ANS ON

ECO

LCD language

ANS ON

ECO

English

ANS ON

ECO

Settings

ANS ON

ECO

Base LCD lang

ANS ON

ECO

English

ANS ON

ECO

15

Telephone settings

Voicemail number

If you subscribe to voicemail service offered by your telephone service provider,

you can save the voicemail number to 1/ for easy access. The voicemail number

is shared by the handset and the telephone base. When you want to retrieve

voicemail messages, press and hold 1/ . Contact your telephone service provider

for more information and assistance about using your voicemail service.

To set the voicemail number:

Press and hold 1/ when the phone is not in use.

Use the dialing keys to enter the voicemail number

(up to 30 digits).

Press DELETE to erase a digit.

Press and hold DELETE to erase all digits.

Press or to move the cursor to the left or to

the right.

Press and hold PAUSE to insert a dialing pause

(a P appears).

Press SELECT to save. Then the handset dials the saved

voicemail number.

-OR-

Press MENU when the handset is not in use.

Press or to scroll to Settings, then press SELECT.

Press or to scroll to Voicemail #, then press SELECT.

Use the dialing keys to enter the voicemail number (up to 30 digits).

Press DELETE to erase a digit.

Press and hold DELETE to erase all digits.

Press or to move the cursor to the left or to the right.

Press and hold PAUSE to insert a dialing pause (a P appears).

Press SELECT to save. The handset displays VM # saved and then returns to

the previous menu. You hear a confirmation tone.

1.

2.

•

3.

1.

2.

3.

4.

•

5.

Voicemail #

ANS ON

ECO

Voicemail #

_

ANS ON

ECO

16

Telephone settings

Clear voicemail indicators

If you subscribe to voicemail service offered by your telephone service provider,

New voicemail and

display on the handset and the telephone base when you

have new voicemail messages. Contact your telephone service provider for more

information and assistance about using your voicemail service.

After you have listened to all new voicemail messages, the indicators on the

handset and the telephone base turn off automatically.

Use the clear voicemail feature when the telephone indicates that there is new

voicemail but there are none (for example, when you have accessed your voicemail

while away from home). Clearing the voicemail waiting indicator only turns off the

indicators; it does not delete your voicemail messages. As long as you have new

voicemail messages, your telephone service provider continues to send the signal to

turn on the indicators.

To manually turn off the new voicemail indicators:

Press MENU when the handset is not in use.

Press or to scroll to Settings, then press SELECT.

Press or to scroll to Clr voicemail, then press SELECT.

The handset displays Reset VM Icon?

Press SELECT to confirm and return to the previous menu.

You hear a confirmation tone.

Your telephone service provider may alert you of new

messages with a stutter (broken) dial tone. Contact your

telephone service provider for details.

Key tone

You can turn the key tone on or off for each handset. If you turn the key tone off,

there are no beeps when you press the handset keys.

Press MENU when the handset is not in use.

Press or to scroll to Settings, then press SELECT.

Press or to scroll to Key tone, then press SELECT.

Press or to choose Key tone:On or Key tone:Off.

Press SELECT to save your selection. Then the handset

returns to the previous menu. You hear a confirmation tone.

1.

2.

3.

4.

1.

2.

3.

4.

5.

Reset VM Icon?

ANS ON

ECO

Clr voicemail

ANS ON

ECO

Key tone

ANS ON

ECO

Key tone:On

ANS ON

ECO

La page est en cours de chargement...

VTech LS6195-17 Manuel utilisateur

Ce manuel convient également à

VTech LS6195-17 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents