AT&T EL52406 Guide de démarrage rapide

Quick start guide

EL52106/EL52206/EL52246/

EL52256/EL52306/EL52346/

EL52356/EL52406

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

Instructions

This quick start guide provides you with basic installation and operation instructions.

A limited set of features are described in abbreviated form.

Please refer to the complete online EL52106/EL52206/EL52246/EL52256/

EL52306/EL52346/EL52356/EL52406 DECT 6.0 cordless telephone/answering

system with caller ID/call waiting user’s manual for a full set of installation and

operation instructions at http://telephones.att.com/manuals.

Before using this AT&T product, please read Important safety information on

pages 33-35 of this quick start guide.

Parts checklist ..........................................................1

Installation .................................................................2

Battery installation ..............................................4

Battery charging ....................................................6

Handset overview .................................................7

Telephone base overview ................................8

Menu overview ........................................................9

Feature summary ..................................................9

Telephone settings ............................................10

Making, answering and ending calls .......12

Options while on calls ......................................13

Find handset ...........................................................14

Intercom ....................................................................15

Directory ...................................................................17

Caller ID ......................................................................19

Call block ..................................................................20

Answering system and voicemail ............ 23

Turn the answering system on or o ... 23

Announcement .................................................... 23

Voice guide .............................................................24

Number of rings ..................................................24

Call screening ........................................................ 25

Message playback .............................................. 25

Delete all old messages ................................. 25

Remote access .....................................................26

Adding and registering cordless

handsets/headsets/speakerphones ...27

Deregistering handsets .................................28

Troubleshooting..................................................29

Important safety information ................... 33

For C-UL compliance ........................................36

FCC Part 68 and ACTA .....................................39

FCC Part 15 ..............................................................40

Limited warranty .................................................41

Technical specications .................................43

Table of contents

1

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

Quick start guide Telephone base

Power adapter for

telephone base

Charger for cordless handset

with power adapter installed

(1 for EL52206/EL52246/

EL52256)

(2 for EL52306/EL52346/

EL52356)

(3 for EL52406)

Battery for cordless

handset

(1 for EL52106)

(2 for EL52206/EL52246/

EL52256)

(3 for EL52306/EL52346/

EL52356)

(4 for EL52406)

Battery compartment cover

(1 for EL52106)

(2 for EL52206/EL52246/

EL52256)

(3 for EL52306/EL52346/

EL52356)

(4 for EL52406)

Telephone line cord Wall-mount bracket

Cordless handset

(1 for EL52106)

(2 for EL52206/EL52246/EL52256)

(3 for EL52306/EL52346/EL52356)

(4 for EL52406)

Quick start guide

EL52106/EL52206/EL52246/

EL52256/EL52306/EL52346/

EL52356/EL52406

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

2

Installation

Install the telephone base and charger, as shown below. If you subscribe to high-speed

Internet service (DSL - digital subscriber line) through your telephone line, you must

install a DSL lter on the DSL line. If you want to mount your telephone on a wall, use

the included wall-mount bracket and refer to Wall-mount installation in the online

user’s manual for details.

Plug the large end

of the charger’s

power adapter into

an electrical outlet

not controlled by a

wall switch.

Ensure the small

end of the charger’s

power adapter is

plugged into the

power jack on the

bottom of the

charger.

Plug the other end of the

telephone line cord into

the telephone line jack

on the bottom of the

telephone base.

A DSL lter (not included)

is required if you have

DSL high-speed Internet

service.

Plug one end of the

telephone line cord into a

telephone wall jack.

Plug the large end of

the base power adapter

into an electrical outlet

not controlled by a wall

switch.

Route the cords

through the slots.

Plug the small end of the

base power adapter into

the power jack on the

bottom of the telephone

base.

3

IMPORTANT INFORMATION:

Use only the power adapter(s) provided with this product. To order a replacement, visit

our website at www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

The power adapters are intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

Avoid placing the telephone base and charger too close to:

Communication devices such as television sets, VCRs, or other cordless

telephones.

Excessive heat sources.

Noise sources such as a window with trac outside, motors, microwave ovens,

refrigerators, or uorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing machine or

workbench.

•

4

Battery installation

Install the battery, as shown below.

Plug the battery connector securely into the socket inside the handset

battery compartment.

Insert the supplied battery with the label THIS SIDE UP facing up, as indicated.

1.

2.

THI

S

I

DE UP

/

CE

CÔ

TÉ

VERS LE

HA

UT

Ba

t

er

y

Pack / Bloc-p

iles

:

BT16

2

342/BT262342 (2.4V 300mAh Ni-MH)

WA

RNING /

A

VE

RT

I

SSE

ME

NT

:

DO NOT BUR

N OR PU

N

CTURE BA

TTERIE

S.

NE

PA

S INCINÉRE

R

OU PE

R

CE

R LE

S

P

ILES

.

M

ade in

C

hina /

F

ab

r

iqué en chine

CR1423

THIS SIDE UP

Battery Pack

/ Bloc-pi

les

BT162342/

B

T262342 (2.4V

4

WA

RN

ING /

AV

ERTISSEMENT

DO NOT BURN OR

P

UNCTURE

B

NE

PA

S INCI

N

ÉRER OU PERC

E

R

L

M

ade in China / Fabriqué

e

n chine

Charge the handset by placing it face up

in the telephone base or charger. The

CHARGE light is on when charging.

4.

Align the cover at against the battery compartment, then slide it upwards until it

clicks into place.

3.

CR142

3

CHARGE light

5

IMPORTANT INFORMATION

Use only the supplied rechargeable battery or replacement battery (model BT162342/

BT262342). To order, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

To replace the battery, press the tab and

slide the battery compartment cover

downwards. Li out the old battery and

disconnect it from the handset. Follow

the instructions to install and charge the

new battery.

Aer you install your telephone or power returns following a

power outage, the handset will prompt you to set the date and

time (see page 11). To skip setting the date and time, press

OFF/CANCEL.

Aer the date and time setting is done or skipped, the handset

will prompt if you want to set up the answering system. Press

MENU/SELECT to start the answering system setup via voice

guide. For more details, see Voice guide on page 24. To skip the

setup, press

OFF/CANCEL on the handset.

Date: MM/DD/YY

ECO

Voice guide to...

ECO

set up Ans sys?

ECO

6

Battery charging

Once you have installed the battery, the screen indicates the battery status (see the

following table). If necessary, place the handset in the telephone base or charger to

charge the battery. For best performance, keep the handset in the telephone base

or charger when not in use. The battery is fully charged aer 16 hours of continuous

charging. See Technical specications on page 43 for battery operating times.

If the screen is blank, you need to charge the handset without interruption for at

least 30 minutes to give the handset enough charge to use the telephone for a short

time. The screen shows Low battery until you have charged the battery without

interruption for at least 30 minutes. The following table summarizes the battery

charge indicators and actions to take.

Battery indicators Battery status Action

The screen is blank or shows

Put in charger.

Battery has no or very little

charge. The handset cannot

be used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and ashes.

Battery has enough charge

to be used for a short time.

Charge without interruption

(at least 30 minutes).

The screen shows HANDSET X

and the battery icon shows .

Battery is charged. To keep the battery charged,

place it in the telephone base

or charger when not in use.

NOTES:

If you are on a call in low battery mode, you hear four short beeps every 50 seconds.

If no battery is installed in the handset when you place it in the telephone base or charger,

the screen shows No battery. Follow the instructions in Battery installation on pages 4-5 to

install the battery.

•

Handset overview

REDIAL/PAUSE

Press repeatedly to view the

last 10 numbers dialed.

While entering numbers,

press and hold to insert a

dialing pause.

•

PHONE/FLASH

Press to make or answer

a call.

During a call, press to answer

an incoming call when you

receive a call waiting alert.

•

1

While reviewing a caller ID log

entry, press repeatedly to add

or remove 1 in front

of the telephone number

before dialing or saving it in

the directory.

Press and hold to set or dial

your voicemail number.

•

MUTE/DELETE

During a call, press to mute

the microphone .

While predialing, press to

delete digits.

While reviewing the redial list,

directory, speed dial list or

caller ID log, press to delete

an individual entry.

•

TONE

Press to switch to tone dialing

temporarily during a call if you

have pulse service.

/

SPEAKER

Press to turn on the handset

speakerphone, press again to

resume normal handset use.

CHARGE light

On when the handset is

charging in the telephone base

or charger.

INT

Press to initiate an intercom

conversation or transfer a call.

DIR/VOLUME

Press to scroll up while in

menus.

Press to increase the listening

volume when on a call,

or increase the message

playback volume.

Press to show directory

entries when the handset is

not in use.

While entering names or

numbers in the directory,

press to move the cursor to

the right.

•

CID/VOLUME

Press to scroll down while in

menus.

Press to decrease the

listening volume when on

a call, or to decrease the

message playback volume.

Press to show the caller ID log

when the handset is not in use.

While entering names or

numbers in the directory,

press to move the cursor to

the le.

•

MENU/SELECT

Press to display the menu.

Once in the menu, press to

select an item or save an

entry or setting.

•

OFF/CANCEL

During a call, press to hang up.

While using menus, press

to cancel an operation, back

up to the previous menu, or

exit the menu display; or

press and hold to exit to

idle mode.

Press and hold while the

handset is not in use to erase

the missed call indicator.

•

QUIET

Press and hold to set and

turn on the QUIET mode, or

turn it o.

When reviewing a caller ID log

entry, press repeatedly to view

other dialing options.

•

7

8

Telephone base overview

REPEAT

Press to repeat a message.

Press twice to play the previous message.

•

Message window

Displays the number of messages or other

answering system information.

DELETE

Press to delete the message currently

playing.

Press twice to delete all old messages when

the telephone is not in use.

•

/VOLUME

/ /VOLUME

When the telephone is idle, press to adjust

the telephone base ringer volume.

During call screening or message playback,

press to adjust the listening volume.

•

FIND HS

Press to page all handsets.

SKIP

Press to skip a message.

PLAY/STOP

Press to start or stop message playback.

During call screening, press to temporarily

turn the call screening on or o.

•

/

ANS ON/OFF

Press to turn the built-in answering system on

or o.

IN USE light

On when the handset is in use, or when the

answering system is answering an incoming

call.

Flashes when another telephone is in use on

the same line.

•

99

Menu overview

Use the menu to change the telephone settings.

Press MENU/SELECT in idle mode (when handset is not in use) to enter the

main menu.

Press

CID or

DIR to scroll through menu items.

Press MENU/SELECT to select or save the indicated item.

-OR-

Press

OFF/CANCEL to cancel an operation, back up to the previous menu or exit

the menu display. Press and hold

OFF/CANCEL to cancel an operation and return

to idle mode.

Feature summary

Default settings are indicated by an asterisk (*).

Screen display Function Options

LCD language Set the display language as English, French or

Spanish.

English*

Français

Español

Voicemail # Set the speed dial voicemail number. Voicemail #

_

Clr voicemail Turn o the voicemail indicator.

Key tone Set whether there are beeps when you press

keys.

On*

O

Set date/time Set date and time of the telephone system. Date: MM/DD/YY

Time: HH:MM -

-

Home area code Set the telephone to recognize calls with the

home area code.

Home area code

_

Dial mode Set whether outgoing calls use pulse dialing or

tone dialing.

Touch-tone*

Pulse

Call screening Set whether incoming calls are played through

the speaker while they are being recorded.

On*

O

# of rings Set how many times the telephone rings before

the answering system answers an incoming call.

2, 3*, 4, 5, 6,

Toll saver

Remote code Select a 2-digit number to allow remote access

from another telephone (away from your home

or oce).

19*

Msg alert tone Set whether there is an audible message alert

every 10 seconds when there are new messages.

On

O*

1.

2.

3.

10

Telephone settings

Use Feature summary on page 9 to nd and set features. The following are a few

examples of common features to set. Refer to Handset settings and Answering

system settings in the online user’s manual for detailed instructions on setting all

telephone features.

Ringer volume

You can set the handset ringer volume level (1-6), or turn the ringer o. When the

ringer is o, appears on the handset screen.

Press MENU/SELECT in idle mode to enter the main menu.

Press

CID or

DIR to scroll to Ringers, then press

MENU/SELECT.

Press MENU/SELECT again to select Ringer volume.

Press

CID or

DIR to sample each volume level.

Press MENU/SELECT to save your preference.

NOTE: If the handset ringer volume is o, that handset ringer is

silenced for all incoming calls. However, that handset still plays the

paging tone when responding to the nd handset feature.

Telephone base ringer volume

When the telephone base is idle, press /VOLUME or /VOLUME on the telephone

base to adjust the ringer volume.

1.

2.

3.

4.

5.

Ringer volume

ECO

Volume:

ECO

11

Set date/time

The answering system announces the day of the week and time of each message

received prior to playing it. If you subscribe to caller ID service, the day, month and

time are set automatically with each incoming call. However, the year must be set so

that the day of the week can be calculated from the caller ID information.

Press MENU/SELECT in idle mode to enter the main menu.

Press

CID or

DIR to scroll to Set date/time, and then press

MENU/SELECT.

Press

CID or

DIR to select the month, then press

MENU/SELECT, or enter the 2-digit number (01-12) using the

dialing keys (0-9).

Press

CID or

DIR to select the day, then press

MENU/SELECT, or enter the 2-digit number (01-31) using

the dialing keys (0-9).

Press

CID or

DIR to select the year, or enter the 2-digit

number (00-99) using the dialing keys (0-9), then press

MENU/SELECT.

Press

CID or

DIR to select the hour, then press

MENU/SELECT, or enter the 2-digit number (00-23) using

the dialing keys (0-9).

Press

CID or

DIR to select the minute, then press

MENU/SELECT, or enter the 2-digit number (00-59) using

the dialing keys (0-9).

Press

CID or

DIR to choose AM or PM. Press MENU/SELECT to save.

1.

2.

3.

4.

5.

6.

7.

8.

Set date/time

ECO

Date: MM/DD/YY

ECO

Time: HH:MM -

-

ECO

12

Making, answering and ending calls

Making a call

Press

PHONE/FLASH or /SPEAKER and then dial the

number using dialing keys.

-OR-

Enter the number using the dialing keys and then press

PHONE/FLASH or /SPEAKER to dial.

While predialing a number, you can:

Press and hold REDIAL/PAUSE to insert a 3-second dialing

pause (a P appears).

Press MUTE/DELETE or OFF/CANCEL to erase digits.

Press and hold MUTE/DELETE or OFF/CANCEL to return to

idle mode.

Answering a call

Press

PHONE/FLASH, /SPEAKER or any dialing key (0-9, or ).

Ending a call

Press

OFF/CANCEL or put the handset in the telephone base

or charger.

Handset speakerphone

During a call, press /SPEAKER to switch between speakerphone and normal

handset use.

Temporary ringer silencing

While the telephone is ringing, press

OFF/CANCEL or MUTE/DELETE to silence the

ringer temporarily on that handset only, or press /VOLUME on the telephone base.

This turns o the ringer without disconnecting the call. The next incoming call rings

normally at the preset volume.

•

13

Options while on calls

Volume control

While on a call, press

DIR/VOLUME to increase or press

CID/VOLUME to decrease

the listening volume.

NOTE: The handset volume setting and speakerphone volume setting are independent.

Join a call in progress

If a handset is already on a call and you would like to join the call, press

PHONE/FLASH or /SPEAKER on another system handset.

To end the call, press

OFF/CANCEL or place the handset in the telephone base or

charger. The call does not end until all handsets hang up.

NOTES:

This feature is only applicable to models with more than one handset.

You can use a maximum of four devices at the same time on an outside call. If you have

ve handsets and the h handset attempts to join the call, the handset screen shows

Unable to call.

Chain dialing

While on a call, you can initiate a dialing sequence from numbers stored in the

directory, caller ID log or redial list. Doing this can be useful if you need to access

numbers other than telephone numbers (such as account numbers or access codes).

To initiate a dialing sequence from the directory, caller ID log or redial list while on a

call, access the number through the menu system:

While on a call, press MENU/SELECT, then scroll to Directory or Caller ID log.

Press MENU/SELECT.

-OR-

While on a call, press REDIAL/PAUSE to show the redial list.

Scroll to the desired number. If you are in directory, you can use the dialing keys to

nd the desired directory entry (see Search by name in the online user’s manual

for more details).

Press MENU/SELECT to dial the displayed number.

Redial

Each handset stores the 10 most recently called numbers in the redial list.

To review and call numbers in the redial list, press REDIAL/PAUSE in idle mode. The

most recently called number appears on the screen.

Press

DIR,

CID or REDIAL/PAUSE repeatedly to scroll through the numbers in the

list.

When the desired number appears, press

PHONE/FLASH or /SPEAKER to dial

the number.

•

1.

2.

3.

1.

2.

3.

14

Find handset

You can use the nd handset feature to nd misplaced handset(s).

To start the paging tone:

Press

FIND HS on the telephone base to start the

paging tone on all handsets for 60 seconds.

To stop the paging tone:

Press

PHONE/FLASH, /SPEAKER,

OFF/CANCEL or

any dialing key (0-9, or ) on the handset(s).

-OR-

Press

FIND HS on the telephone base.

-OR-

Place the handset in the telephone base or charger.

•

15

Intercom

Make and answer an intercom call

You can make an intercom call between two handsets, or a

handset and a cordless headset/speakerphone (sold separately).

Press INT on your handset in idle mode.

If you have two handsets and no other registered devices,

your originating handset screen shows Calling HS X. The

other handset rings and its screen shows HS X is calling.

If you have more than two handsets and/or cordless

headset(s)/speakerphone(s), your originating handset

screen shows Intercom to:. Use the dialing keys to select the

destination device (1-5; depends on registration sequence).

The destination device rings. If it is a handset, its screen

shows HS X is calling.

To answer the intercom call, press any dialing key (0-9, or ),

PHONE/FLASH, /SPEAKER or INT on the other handset.

Both handset screens now show Intercom.

To end an intercom call, press

OFF/CANCEL or place the handset back in the

telephone base or charger.

NOTES:

Before the intercom call is answered, you can cancel it by pressing

OFF/CANCEL or INT on

your originating handset.

For cordless headsets and speakerphones, refer to the corresponding user’s manual on how

to answer and end an intercom call.

1.

•

2.

3.

•

Intercom to:

ECO

10:30

PM

11/20

Calling HS X

ECO

10:30

PM

11/20

Intercom

ECO

10:30

PM

11/20

16

Call transfer using intercom

You can transfer an outside call to another system handset.

During an outside call, press INT and proceed just as you would make a normal

intercom call. Once the other party has answered the intercom call, you have the

following options:

You can let the other device join you on the outside call

in a three-way conversation. Press and hold INT on the

originating handset.

You can transfer the call. Press

OFF/CANCEL, or place your

handset back in the telephone base or charger. The other

handset automatically connects to the outside call.

You can switch between the outside call (Outside call appears

on the screen) and the intercom call (Intercom appears on the

screen). Press INT on the originating handset to switch.

The called party can end the intercom call by

OFF/CANCEL

or placing the other handset back in the telephone base or

charger. The outside call continues with the originating handset.

NOTES:

To cancel the intercom call and return to the external call before the intercom call is

answered, press

OFF/CANCEL or INT or on your originating handset.

If the called party does not answer within 100 seconds, or if the device is in use, on a call, or

out of range, the calling handset shows Unable to call on its screen and automatically returns

to the outside call.

•

Intercom

ECO

Outside call

ECO

17

AT&T EL52406 Guide de démarrage rapide

AT&T EL52406 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents