AT&T EL52315 Guide de démarrage rapide

Quick start guide

EL52115/EL52145/EL52215/

EL52245/EL52265/EL52315/

EL52345/EL52365/EL52465

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

Instructions

This quick start guide provides you with basic installation and operation instructions.

A limited set of features are described in abbreviated form.

Please refer to the complete online EL52115/EL52145/EL52215/EL52245/EL52265/

EL52315/EL52345/EL52365/EL52465 DECT 6.0 cordless telephone/answering system

with caller ID/call waiting user’s manual for a full set of installation and operation

instructions at www.telephones.att.com/manuals.

Before using this AT&T product, please read Important safety information on

pages 32-34 of this quick start guide.

Table of contents

Parts checklist .............................................................1

Installation ................................................................... 2

Battery installation .................................................4

Battery charging .......................................................6

Handset overview .................................................... 7

Telephone base overview ...................................8

Menu overview ...........................................................9

Feature summary .....................................................9

Telephone settings ...............................................10

Making, answering and ending calls ...........11

Options while on calls .........................................12

Handset locator.......................................................13

Intercom .......................................................................14

Directory ......................................................................16

Caller ID .........................................................................18

Call block ...................................................................... 19

Answering system and voicemail ................22

Turn the answering system on or o .......22

Announcement ........................................................22

Voice guide .................................................................23

Number of rings ......................................................23

Call screening ........................................................... 24

Message playback ................................................. 24

Delete all old messages .................................... 24

Remote access .........................................................25

Adding and registering cordless

handsets/headsets/

speakerphones ................................................. 26

Deregistering handsets .....................................27

Troubleshooting.....................................................28

Important safety information .......................32

For C-UL compliance ............................................ 35

FCC Part 68 and ACTA ........................................ 38

FCC Part 15 ................................................................. 39

Limited warranty ...................................................40

Technical specications .................................... 42

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

Cordless handset

(1 for EL52115/EL52145)

(2 for EL52215/EL52245/EL52265)

(3 for EL52315/EL52345/EL52365)

(4 for EL52465)

Charger for cordless handset with

power adapter installed

(1 for EL52215/EL52245/EL52265)

(2 for EL52315/EL52345/EL52365)

(3 for EL52465)

Wall-mount bracket

Battery compartment cover

(1 for EL52115/EL52145)

(2 for EL52215/EL52245/EL52265)

(3 for EL52315/EL52345/EL52365)

(4 for EL52465)

Telephone line cordBattery for cordless handset

(1 for EL52115/EL52145)

(2 for EL52215/EL52245/EL52265)

(3 for EL52315/EL52345/EL52365)

(4 for EL52465)

Power adapter for

telephone base

Telephone base

Quick start guide (s)

1

Quick start guide

EL52115/EL52145/EL52215/

EL52245/EL52265/EL52315/

EL52345/EL52365/EL52465

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 3 00mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1423

2

Installation

Install the telephone base and charger, as shown below. If you subscribe to high-speed

Internet service (DSL - digital subscriber line) through your telephone line, you must

install a DSL lter on the DSL line. If you want to mount your telephone on a wall, use the

included wall-mount bracket and refer to Wall-mount installation in the online user’s

manual for details.

Plug the large end

of the charger’s

power adapter into

an electrical outlet

not controlled by a

wall switch.

Ensure the small

end of the charger’s

power adapter is

plugged into the

power jack on the

bottom of the

charger.

Plug the large end

of the base power

adapter into an

electrical outlet not

controlled by a wall

switch.

Plug the small end of

the base power adapter

into the power jack

on the bottom of the

telephone base.

Plug one end of the

telephone line cord into

a telephone wall jack.

A DSL lter (not

included) is required

if you have DSL

high-speed Internet

service.

Route the cords

through the slots.

Plug the other end of

the telephone line cord

into the telephone line

jack on the bottom of

the telephone base.

3

IMPORTANT INFORMATION:

• Use only the power adapter(s) provided with this product. To obtain a replacement, visit our

website at www.telephones.att.com or call 1 (800) 222-3111. In Canada,

dial 1 (866) 288-4268.

• The power adapters are intended to be correctly oriented in a vertical or oor mount position.

The prongs are not designed to hold the plug in place if they are plugged into a ceiling or an

under-the-table, or cabinet outlet.

• Avoid placing the telephone base and charger too close to:

• Communication devices such as television sets, VCRs, or other cordless telephones.

• Excessive heat sources.

• Noise sources such as a window with trac outside, motors, microwave ovens, refrigerators,

or uorescent lighting.

• Excessive dust sources such as a workshop or garage.

• Excessive moisture.

• Extremely low temperature.

• Mechanical vibration or shock such as on top of a washing machine or workbench.

3

4

Battery installation

Install the battery, as shown below.

1. Plug the battery connector securely into the socket inside the handset battery

compartment.

2. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated.

3. Align the cover at against the battery compartment, then slide it upwards until it clicks

into place.

4. Charge the handset by placing it

face forward in the telephone base

or charger. The light is on

when charging.

CHARGE light

CR1423

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1423

THIS SIDE UP

Battery Pack / Bloc-piles

BT162342/BT262342 (2.4V 4

WARNING / AVERTISSEMENT

DO NOT BURN OR PUNCTURE B

NE PAS INCINÉRER OU PERCER L

Made in China / Fabriqué en chine

5

IMPORTANT INFORMATION:

Use only the supplied rechargeable battery or replacement battery (model BT162342/BT262342).

To order, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Aer you install your telephone or power returns following a

power outage, the handset will prompt you to set the date and

time (see page 10). To skip setting the date and time, press

.

Date: MM/DD/YY

ECO

Voice guide to...

ECO

set up Ans sys?

ECO

Aer the date and time setting is done or skipped, the handset

will prompt if you want to set up the answering system. Press

to start the answering system setup via voice

guide. For more details, see Voice guide on page 23. To skip the

setup, press on the handset.

To replace the battery, press the tab and slide

the battery compartment cover downwards.

Li out the old battery and disconnect it

from the handset. Follow the instructions to

install and charge the new battery.

6

Battery charging

Once you have installed the battery, the screen indicates the battery status (see the

following table). If necessary, place the handset in the telephone base or charger to

charge the battery. For best performance, keep the handset in the telephone base

or charger when not in use. The battery is fully charged aer 16 hours of continuous

charging. See Technical specications on page 42 for battery operating times.

If the screen is blank, you need to charge the handset without interruption for at least

30 minutes to give the handset enough charge to use the telephone for a short time.

The screen shows Low battery until you have charged the battery without interruption

for at least 30 minutes. The following table summarizes the battery charge indicators

and actions to take.

Battery indicators Battery status Action

The screen is blank or shows

Put in charger.

Battery has no or very little

charge. The handset cannot

be used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and ashes.

Battery has enough charge

to be used for a short time.

Charge without interruption

(at least 30 minutes).

The screen shows HANDSET X

and the battery icon shows .

Battery is charged. To keep the battery charged,

place it in the telephone base or

charger when not in use.

NOTES:

• If you are on a call in low battery mode, you hear 4 short beeps every 50 seconds.

• If no battery is installed in the handset when you place it in the telephone base or charger, the

screen shows No battery. Follow the instructions in Battery installation on pages 4-5 to install

the battery.

7

• While reviewing a caller ID

log, press repeatedly to add

or remove 1 in front of the

caller ID log before dialing

or saving it to the directory.

• Press and hold to set or dial

your voicemail number.

Handset overview

light

On when the handset is

charging in the telephone

base or charger.

• Press to scroll down while

in menus.

• Press to show the caller ID

log when the handset is not

in use.

• While entering names or

numbers in the directory,

press to move the cursor to

the le.

• Press to decrease the

listening volume when on

a call, or to decrease the

message playback volume.

• Press to display the menu.

• Once in the menu, press to

select an item or save an

entry or setting.

• During a call, press to hang

up.

• While using menus, press to

cancel an operation, back

up to the previous menu,

or exit the menu display;

or press and hold to exit to

idle mode.

• Press and hold while the

handset is not in use to

erase the missed call

indicator.

• Press and hold to set and

turn on the quiet mode, or

turn it o.

• When reviewing a caller ID

log entry, press repeatedly

to view other dialing options.

• Press to scroll up while in

menus.

• Press to show directory

entries when the handset is

not in use.

• While entering names or

numbers in the directory,

press to move the cursor to

the right.

• Press to increase the

listening volume when on a

call, or increase the message

playback volume.

Press to turn on the handset

speakerphone, press again to

resume normal handset use.

• Press repeatedly to review

the last 10 numbers dialed.

• While entering numbers,

press and hold to insert a

dialing pause.

Press to switch to tone dialing

temporarily during a call if you

have pulse service.

• Press to make or answer

a call.

• During a call, press to

answer an incoming call

when you receive a call

waiting alert.

• During a call, press to mute

the microphone.

• While predialing, press to

erase digits.

• While reviewing the redial

list, directory or caller ID

log, press to delete an

individual entry.

Press to initiate an intercom

conversation or transfer a call.

8

Telephone base overview

• Press to delete the message currently

playing.

• Press twice to delete all old messages

when the telephone is not in use.

• Press to repeat a message.

• Press twice to play the previous message.

Press to skip a message.

Message window

Displays the number of messages or other

answering system information.

/

• When the telephone is not in use, press to

adjust the telephone base ringer volume.

• During call screening or message playback,

press to adjust the listening volume.

Press to turn the built-in answering system

on or o.

Press to page all handsets.

• Press to start or stop message playback.

• During call screening, press to temporarily

turn the call screening on or o.

• On when the handset is in use, or when

the answering system is answering an

incoming call.

• Flashes when another telephone is in use

on the same line.

9

Menu overview

Use the menu to change the telephone settings.

1. Press in idle mode (when the handset is not in use) to enter the

main menu.

2. Press or to scroll through menu items.

3. Press to select or save the indicated item.

-OR-

Press to cancel an operation, back up to the previous menu

or exit the menu display. Press and hold to cancel an operation and

return to idle mode.

Feature summary

Default settings are indicated by an asterisk (*).

Screen display Function Options

LCD language Set the display language as English, French or

Spanish.

English*

Français

Español

Voicemail # Set the speed dial voicemail number. Voicemail #

-

Clr voicemail Turn o the voicemail indicator.

Key tone Set whether there are beeps when you press keys. On*

O

Set date/time Set date and time of the telephone system. Date: MM/DD/YY

Time: HH:MM

- -

Home area code Set the telephone to recognize calls with the home

area code.

Home area code

---

Dial mode Set whether outgoing calls use pulse dialing or tone

dialing.

Pulse

Touch-tone*

Call screening Set whether incoming calls are played through the

speaker while they are being recorded.

On*

O

# of rings Set how many times the telephone rings before the

answering system answers an incoming call.

6, 5, 4, 3*, 2,

Toll saver

Remote code Select a 2-digit number to allow remote access from

another telephone (away from your home

or oce).

19*

Msg alert tone Set whether there is an audible message alert every

10 seconds when there are new messages.

On

O*

10

Telephone settings

Use Feature summary on page 9 to nd and set features. The following are a few

examples of common features to set. Refer to Handset settings and Answering

system settings in the online user’s manual for detailed instructions on setting all

telephone features.

Handset ringer volume

You can set the handset ringer volume level, or turn the ringer o. When the ringer is o,

appears on the handset screen.

1. Press when the handset is in idle mode.

2. Press or to scroll to Ringers, then press

twice to select Ringer volume.

3. Press or to sample each volume level.

4. Press to save your preference.

NOTE: If the handset ringer volume is o, that handset ringer is silenced for

all incoming calls; however, that handset still plays the paging tone when

responding to the handset locator feature.

Telephone base ringer volume

When the telephone is not in use, press / on the telephone base to adjust

the ringer volume.

Date and time

The answering system announces the day of the week and time of each message

received prior to playing it. If you subscribe to caller ID service, the day, month and time

are set automatically with each incoming call. However, the year must be set so that the

day of the week can be calculated from the caller ID information.

1. Press when the handset is in idle mode.

2. Press or to scroll to Set date/time, then press

.

3. Press or to select the month, then press

or enter the 2-digit number (01-12) using the

dialing keys.

4. Press or to select the day, then press

or enter the 2-digit number (01-31) using the dialing keys.

5. Press or to select the year or enter the 2-digit

number (00-99) using the dialing keys, then press .

6. Press or to select the hour, then press

or enter the 2-digit number (00-23) using the dialing keys.

7. Press or to select the minute, then press

or enter the 2-digit number (00-59) using the

dialing keys.

8. Press or to choose AM or PM. Press

to save.

Ringer volume

ECO

Volume:

ECO

Set date/time

ECO

Date: MM/DD/YY

ECO

Time: HH:MM - -

ECO

11

Making, answering and ending calls

Making a call

Press or and then dial the

number using the dialing keys.

-OR-

Enter the number using the dialing keys and then press

or to dial.

While predialing a number, you can:

• Press and hold to insert a 3-second dialing

pause (a P appears).

• Press or to erase a digit.

• Press and hold or to return

to idle mode.

Answering a call

Press , , or any dialing key (0-9,

or

#

).

Ending a call

Press or put the handset in the telephone base or

charger to end the call.

Handset speakerphone

During a call, press to switch between speakerphone and normal handset

use. Press to hang up.

Temporary silencing

While the telephone is ringing, press or to silence the

ringer temporarily on that handset only. This turns o the ringer without disconnecting

the call. The next incoming call rings normally at the preset volume.

12

Options while on calls

Volume control

While on a call, press to increase or press to decrease

the listening volume.

NOTE: The handset volume setting and speakerphone volume setting are independent. Changing

one does not aect the other.

Join a call in progress

If a handset is already on a call and you would like to join the call, press

or on another system handset.

To exit the call, press or place the handset in the telephone base or

charger. The call does not end until all handsets hang up.

NOTES:

• This feature is only applicable to models with more than one handset.

• For models with two to four handsets, all handsets can be used at the same time on an outside

call. For models with ve handsets, you can use a maximum of four handsets. If the h handset

attempts to join the call, the handset screen shows Unable to call.

Chain dialing

While on a call, you can initiate a dialing sequence from numbers stored in the directory,

caller ID log or redial list. Doing this can be useful if you wish to access other numbers

(such as bank account numbers or access codes).

To initiate a dialing sequence from the directory, caller ID log or redial list while on a call,

access the number through the menu system:

1. While on a call, press , then scroll to Directory or Caller ID log.

Press .

-

OR

-

While on a call, press to show the redial list.

2. Scroll to the desired number. If you are in the directory, you can use the dialing keys

to nd the desired directory entry (see Search by name in the online user’s manual

for more details).

3. Press to dial the displayed number.

Redial

Each handset stores the 10 most recently called numbers in the redial list.

1. To review and call numbers in the redial list, press in idle mode. The

most recently called number appears on the screen.

2. To view up to 10 recently called numbers, press

,

or

repeatedly to scroll through the numbers in the list.

3. When the desired number appears, press or to dial

the number.

13

Handset locator

Use the handset locator to nd misplaced handset(s).

To start the paging tone:

• Press at the telephone base to start

the paging tone on all handsets for 60 seconds.

To stop the paging tone:

• Press , ,

or any dialing key (0-9, or

#

) on

the handset(s).

-OR-

• Press on the telephone base.

-OR-

• Put the handset in the telephone base or charger.

14

Intercom

Make and answer an intercom call

You can make an intercom call between two handsets, or a handset

and a cordless headset/speakerphone (sold separately).

1. Press on your handset when not in use.

• If you have 2 handsets and no other registered device(s), your

originating handset screen shows Calling HS X, and the other

handset screen shows HS X is calling.

• If you have more than two handsets and/or cordless

headset(s)/speakerphone(s), your originating handset screen

shows Intercom to:. Use the dialing keys to select the the

destination handset. The destination handset screen shows

HS X is calling (X represents the handset number).

2. To answer the intercom call, press any dialing key (0-9, or

#

),

, or on that handset. Both

handset screens now show Intercom.

3. To end an intercom call, press or place the handset back in the

telephone base or charger.

NOTES:

• Before the intercom call is answered, you can cancel the intercom call by pressing

or on your originating handset.

• For cordless headsets and speakerphones, refer to the corresponding user’s manual on how to

answer and end an intercom call.

Intercom to:

ECO

10:30

PM

11/20

Calling HS X

ECO

10:30

PM

11/20

Intercom

ECO

10:30

PM

11/20

15

Call transfer using intercom

You can transfer an outside call to another system handset.

During an outside call, press and proceed just as you would make a normal

intercom call. Once the other party has answered the intercom call, you have the

following options:

• You can let the other handset join you on the outside call in

a three-way conversation. Press and hold on the

originating handset.

• You can transfer the call. Press or place the

handset back in the telephone base or charger. The other

handset automatically connects to the outside call.

• Press on your originating handset to switch between

the outside call (Outside call appears on the screen) and the

intercom call (Intercom appears on the screen).

• The called party can end the intercom call by pressing

or placing the other handset back in the

telephone base or charger. The outside call continues with the

originating handset.

NOTES:

• To cancel the transfer and return to the outside call before the intercom call is answered, press

or on your handset.

• If the called party does not answer within 100 seconds, or if the handset is in use, on a call, or out

of range, the originating handset shows

Unable to call

on its screen and automatically returns

to the outside call.

Outside call

ECO

Intercom

ECO

16

AT&T EL52315 Guide de démarrage rapide

Ce manuel convient également à

AT&T EL52315 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents