uniarch NVR108LS-P8 Mode d'emploi

Marque
uniarch
Modèle
NVR108LS-P8
Taper
Mode d'emploi
Network Video Recorders
Quick Guide
V1.00
1
1 Packing List
Contact your local dealer if the package is damaged or incomplete. The attachments
may vary with models, please see the actual model for details.
No.
Name
Qty
Unit
1
Network Video Recorder
1
PCS
2
Screws
1
Set
3
User manual
1
Set
2 Default IP, Username and Password
IP address:
192.168.1.30
Username:
admin
Password:
123456
3 Ports and Interfaces
2
4 Disk Installation
The illustrations are for reference only. The actual device may vary.
4.1 Preparation
Prepare a 1# or 2# Philips screwdriver, a pair of antistatic gloves or a wrist strap.
Disconnect power before installation.
4.2 HDD Installation
1. Loosen the four screws on the side panels, and remove the upper cover.
2. Insert the screws into the disk and tighten the screws halfway. In the figure
below, ① is screw, ② is HDD.
3. Slide the screws in step 2 into the chassis from A to B, and tighten them. Then
fasten another two screws to fasten the hard disk.
3
4. Connect the power cables and data cables.
5. Put the cover back in place and tighten the screws.
5 Startup and Shutdown
Make sure the cables are connected correctly and the device is grounded properly.
Use a power supply that meets requirements.
5.1 Startup
Connect the device to power to start up the device.
5.2 Shutdown
Go to the live view page, right click and then select Shutdown in the shortcut menu.
CAUTION!
Do not disconnect power when the NVR is operating or shutting down.
6 Local Operations
6.1 Add IP Camera
Before add or manage IP cameras, make sure the IP camera is connected to the
network.
1. Right click in the live view page, and then click Camera > Camera > Camera.
4
2. Click Add Manually, enter the IP address and other required information.
3. Check the status of camera .
If the status icon is highlighted, it means the camera gets online successfully.
If the status icon is grayed out, place your mouse cursor on the icon to view the
cause of error. Click the edit button to modify device information.
NOTE!
You can also click to add a device.
To search for devices in a specified network segment, click Search Segment.
6.2 Recording and Playback
6.2.1 Recording
A 7*24 recording schedule is enabled by default. To set a recording schedule
manually, right click and select Menu > Storage > Recording Schedule and then set
recording type and time based on your needs.
6.2.2 Playback
In live view page, right-click a preview window and select Playback to play the
recording of the current day.
NOTE!
If you choose Event type recording, you need to enable the corresponding alarm
function and configure alarm-triggered recording/snapshot first.
7 Web Login
Before you begin, check that your PC is connected to your NVR through network.
1. Open the browser on your PC, enter the IP address in the address bar, then press
Enter.
5
2. In the login page, enter the correct username and password, then click Login.
NOTE!
Install the plugin as prompted at first login.
Close all browsers during the installation.
6
Disclaimer and Safety Warnings
Copyright Statement
No part of this manual may be copied, reproduced, translated or distributed in any form by any
means without prior content in writing from our company (referred to as us hereafter).
The product described in this manual may contain proprietary software owned by our company
and its possible licensors. Unless permitted, no one is allowed to copy, distribute, modify,
abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the
software in any form by any means.
Export Compliance Statement
Our company complies with applicable export control laws and regulations worldwide, including
that of the People's Republic of China and the United States, and abides by relevant regulations
relating to the export, re-export and transfer of hardware, software and technology. Regarding
the product described in this manual, our company asks you to fully understand and strictly
abide by the applicable export laws and regulations worldwide.
Privacy Protection Reminder
Our company complies with appropriate privacy protection laws and is committed to protecting
user privacy. You may want to read our full privacy policy at our website and get to know the
ways we process your personal information. Please be aware, using the product described in
this manual may involve the collection of personal information such as face, fingerprint, license
plate number, email, phone number, GPS. Please abide by your local laws and regulations while
using the product.
About This Manual
This manual is intended for multiple product models, and the photos, illustrations,
descriptions, etc, in this manual may be different from the actual appearances, functions,
features, etc, of the product.
This manual is intended for multiple software versions, and the illustrations and descriptions
in this manual may be different from the actual GUI and functions of the software.
Despite our best efforts, technical or typographical errors may exist in this manual. Our
company cannot be held responsible for any such errors and reserves the right to change the
manual without prior notice.
Users are fully responsible for the damages and losses that arise due to improper operation.
Our company reserves the right to change any information in this manual without any prior
notice or indication. Due to such reasons as product version upgrade or regulatory
requirement of relevant regions, this manual will be periodically updated.
Disclaimer of Liability
To the extent allowed by applicable law, in no event will our company be liable for any special,
incidental, indirect, consequential damages, nor for any loss of profits, data, and documents.
The product described in this manual is provided on an "as is" basis. Unless required by
applicable law, this manual is only for informational purpose, and all statements, information,
7
and recommendations in this manual are presented without warranty of any kind, expressed
or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for
a particular purpose, and noninfringement.
Users must assume total responsibility and all risks for connecting the product to the Internet,
including, but not limited to, network attack, hacking, and virus. We strongly recommends
that users take all necessary measures to enhance the protection of network, device, data
and personal information. Our company disclaims any liability related thereto but will readily
provide necessary security related support.
To the extent not prohibited by applicable law, in no event will our company and its
employees, licensors, subsidiary, affiliates be liable for results arising out of using or inability
to use the product or service, including, not limited to, loss of profits and any other
commercial damages or losses, loss of data, procurement of substitute goods or services;
property damage, personal injury, business interruption, loss of business information, or any
special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary,
subsidiary losses, however caused and on any theory of liability, whether in contract, strict
liability or tort (including negligence or otherwise) in any way out of the use of the product,
even if our company has been advised of the possibility of such damages (other than as may
be required by applicable law in cases involving personal injury, incidental or subsidiary
damage).
To the extent allowed by applicable law, in no event shall our total liability to you for all
damages for the product described in this manual (other than as may be required by
applicable law in cases involving personal injury) exceed the amount of money that you have
paid for the product.
Network Security
Please take all necessary measures to enhance network security for your device.
The following are necessary measures for the network security of your device:
Change default password and set strong password: You are strongly recommended to
change the default password after your first login and set a strong password of at least nine
characters including all three elements: digits, letters and special characters.
Keep firmware up to date: It is recommended that your device is always upgraded to the
latest version for the latest functions and better security. Visit our official website or contact
your local dealer for the latest firmware.
The following are recommendations for enhancing network security of your device:
Change password regularly: Change your device password on a regular basis and keep the
password safe. Make sure only the authorized user can log in to the device.
Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data
security.
Minimum port mapping: Configure your router or firewall to open a minimum set of ports
to the WAN and keep only the necessary port mappings. Never set the device as the DMZ
host or configure a full cone NAT.
Disable the automatic login and save password features: If multiple users have access to
your computer, it is recommended that you disable these features to prevent unauthorized
access.
8
Choose username and password discretely: Avoid using the username and password of your
social media, bank, email account, etc, as the username and password of your device, in case
your social media, bank and email account information is leaked.
Restrict user permissions: If more than one user needs access to your system, make sure
each user is granted only the necessary permissions.
Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and
the system will automatically forward port data, which results in the risks of data leakage.
Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been
enabled manually on your router.
Check logs: Check your device logs regularly to detect unauthorized access or abnormal
operations.
Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized
physical access.
Isolate video surveillance network: Isolating your video surveillance network with other
service networks helps prevent unauthorized access to devices in your security system from
other service networks.
Safety Warnings
The device must be installed, serviced and maintained by a trained professional with necessary
safety knowledge and skills. Before you start using the device, please read through this guide
carefully and make sure all applicable requirements are met to avoid danger and loss of property.
Storage, Transportation, and Use
Store or use the device in a proper environment that meets environmental requirements,
including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic
radiation, etc.
Make sure the device is securely installed or placed on a flat surface to prevent falling.
Unless otherwise specified, do not stack devices.
Ensure good ventilation in the operating environment. Do not cover the vents on the device.
Allow adequate space for ventilation.
Protect the device from liquid of any kind.
Make sure the power supply provides a stable voltage that meets the power requirements
of the device. Make sure the power supply's output power exceeds the total maximum
power of all the connected devices.
Verify that the device is properly installed before connecting it to power.
Do not remove the seal from the device body without consulting our company first. Do not
attempt to service the product yourself. Contact a trained professional for maintenance.
Always disconnect the device from power before attempting to move the device.
Take proper waterproof measures in accordance with requirements before using the device
outdoors.
Power Requirements
Installation and use of the device must be in strict accordance with your local electrical safety
regulations.
Use a UL certified power supply that meets LPS requirements if an adapter is used.
Use the recommended cordset (power cord) in accordance with the specified ratings.
Only use the power adapter supplied with your device.
9
Use a mains socket outlet with a protective earthing (grounding) connection.
Ground your device properly if the device is intended to be grounded.
Battery Use Caution
When battery is used, avoid:
High or low extreme temperatures during use, storage and transportation;
Extremely low air pressure, or low air pressure at high altitude.
Battery replacement.
Use the battery properly. Improper use of the battery such as the following may cause risks
of fire, explosion or leakage of flammable liquid or gas.
Replace battery with an incorrect type;
Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery;
Dispose the used battery according to your local regulations or the battery manufacturer's
instructions.
Avertissement de l’utilisation de la batterie
Lorsque utiliser la batterie, évitez:
Températures extrêmement élevées ou basses pendant l’utilisation, le stockage et le
transport;
Pression d’air extrêmement basse, ou pression d’air basse à haute altitude;
Remplacement de la batterie.
Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles
mentionnées ici, peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz
inflammables.
Remplacer la batterie par un type incorrect;
Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper
la batterie;
Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du
fabricant de la batterie.
Personal safety warnings:
Chemical Burn Hazard. This product contains a coin cell battery. Do not ingest battery. If
the coin cell battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it
away from children.
If you think batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention.
Avertissements de sécurité personnelle:
Risque de brûlure chimique. Ce produit contient une batterie de cellules. N’ingérer pas la
batterie. Si la batterie de cellule est avalée, elle peut causer de graves brûlures internes
en seulement 2 heures et peut entraîner la mort.
Gardez les batteries nouvelles ou utilisées à l’écart des enfants.
Si le compartiment de la batterie ne se ferme pas en toute sécurité, cessez d’utiliser le
produit et gardez-le à l’écart des enfants.
Si vous pensez que des piles ont pu être avalées ou placées à l’intérieur d’une partie du
corps, consultez immédiatement un médecin.
10
Regulatory Compliance
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
LVD/EMC Directive
This product complies with the European Low Voltage Directive 2014/35/EU
and EMC Directive 2014/30/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical &
Electronic Equipment (WEEE) Directive and must be disposed of in a
responsible manner.
Battery Directive-2013/56/EC
Battery in the product complies with the European Battery Directive
2013/56/EC. For proper recycling, return the battery to your supplier or to a
designated collection point.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

uniarch NVR108LS-P8 Mode d'emploi

Marque
uniarch
Modèle
NVR108LS-P8
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents