Toro Titan ZX4875 Zero Turn Riding Mower Manuel utilisateur

Form No. 3464-658 Rev A

T itan ZX4875, ZXM4875, ZXM5475, or ZXM6075 Riding

Mower

76420 , 76425 , 76530 , 76635

T itan ZX4875, ZXM4875, ZXM5475 oder ZXM6075

Aufsitzmäher

76420 , 76425 , 76530 , 76635

T ondeuse autoportée T itan ZX4875, ZXM4875,

ZXM5475, ou ZXM6075

76420 , 76425 , 76530 , 76635

T itan ZX4875, ZXM4875, ZXM5475 of ZXM6075

Zitmaaier

76420 , 76425 , 76530 , 76635

www .T oro.com.

*3464-658*

Operator’s Manual

Titan ZX4875, ZXM4875, ZXM5475, or

ZXM6075 Riding Mower

Model—Serial Range

76420—400000000 and Up

76425—400000000 and Up

76530—400000000 and Up

76635—400000000 and Up

3464-637A Original Instructions (EN) *3464-637*A

Disclaimers and Regulatory Information

This product complies with all relevant European directives; for details, please see the

separate product specific Declaration of Conformity (DOC) sheet.

Gross or Net Torque: The gross or net torque of this engine was laboratory rated by the

engine manufacturer in accordance with the Society of Automotive Engineers (SAE) J1940

or J2723. As configured to meet safety, emission, and operating requirements, the actual

engine torque on this class of mower will be significantly lower. Please refer to the engine

manufacturer’s information included with the machine.

Table of Contents

Chapter 1: Introduction........................................................................................................................ 1–1

Intended Use ..................................................................................................................................... 1–1

Getting Help....................................................................................................................................... 1–1

Manual Conventions........................................................................................................................ 1–2

Safety Alert Classifications......................................................................................................... 1–2

Chapter 2: Safety.................................................................................................................................. 2–1

General Safety .................................................................................................................................. 2–1

Slope Indicator .................................................................................................................................. 2–2

Safety and Instructional Decals .................................................................................................... 2–3

Chapter 3: Product Overview ............................................................................................................ 3–1

Control Panel..................................................................................................................................... 3–1

Motion-Control Levers..................................................................................................................... 3–3

Park Position ................................................................................................................................. 3–3

MyRide® Suspension Adjustment Lever.................................................................................... 3–4

Height-of-Cut Pin.............................................................................................................................. 3–4

Deck-Lift Pedal.................................................................................................................................. 3–4

Transport-Lock Lever ...................................................................................................................... 3–4

Fuel Gauge ........................................................................................................................................ 3–5

Specifications .................................................................................................................................... 3–5

Chapter 4: Operation ........................................................................................................................... 4–1

Before Operation .............................................................................................................................. 4–1

Before Operation Safety ............................................................................................................. 4–1

Fuel .................................................................................................................................................. 4–3

Performing Daily Maintenance.................................................................................................. 4–3

Break-In Time ................................................................................................................................ 4–4

Safety-Interlock System.............................................................................................................. 4–4

Positioning the Seat..................................................................................................................... 4–5

Adjusting the Motion-Control Lever Height ............................................................................ 4–6

Adjusting the Motion-Control Lever Tilt ................................................................................... 4–6

Converting to Side Discharge.................................................................................................... 4–7

During Operation ............................................................................................................................ 4–14

During Operation Safety ........................................................................................................... 4–14

Entering the Operator’s Position............................................................................................. 4–17

Starting the Engine..................................................................................................................... 4–17

Shutting Off the Engine ............................................................................................................. 4–18

Driving the Machine ................................................................................................................... 4–19

Operating the Mower Blade-Control Switch (PTO) ............................................................ 4–20

Side Discharge............................................................................................................................ 4–21

Adjusting the Height of Cut....................................................................................................... 4–22

8111 Lyndale Ave So

Bloomington, MN 55044

Contact us at www.Toro.com

Printed in the USA

Using the Transport Lock.......................................................................................................... 4–22

Adjusting the Anti-Scalp Rollers.............................................................................................. 4–23

Operating Tips............................................................................................................................. 4–23

After Operation................................................................................................................................ 4–24

After Operation Safety............................................................................................................... 4–24

Cleaning the Machine................................................................................................................ 4–25

Hauling the Machine .................................................................................................................. 4–25

Chapter 5: Maintenance ..................................................................................................................... 5–1

Maintenance Safety ......................................................................................................................... 5–1

Recommended Maintenance Schedule...................................................................................... 5–2

Pre-Maintenance Procedures ....................................................................................................... 5–3

Moving a Non-Functioning Machine ........................................................................................ 5–3

Releasing the Mower-Deck Curtain ......................................................................................... 5–4

Engine Maintenance........................................................................................................................ 5–5

Engine Safety ................................................................................................................................ 5–5

Air Cleaner Service ...................................................................................................................... 5–5

Engine-Oil Service ....................................................................................................................... 5–7

Servicing the Spark Plug ............................................................................................................ 5–9

Cleaning the Blower Housing .................................................................................................. 5–11

Fuel Maintenance........................................................................................................................... 5–12

Replacing the Fuel Filter........................................................................................................... 5–12

Electrical System Maintenance................................................................................................... 5–13

Electrical System Safety........................................................................................................... 5–13

Battery Service............................................................................................................................ 5–13

Jump-Starting the Machine ...................................................................................................... 5–17

Servicing the Fuses ................................................................................................................... 5–19

Drive System Maintenance .......................................................................................................... 5–19

Checking the Tire Pressure...................................................................................................... 5–19

Checking the Wheel Lug Nuts................................................................................................. 5–20

Adjusting the Tracking............................................................................................................... 5–20

Belt Maintenance............................................................................................................................ 5–21

Inspecting the Belts.................................................................................................................... 5–21

Replacing the Mower Belt......................................................................................................... 5–21

Mower-Deck Maintenance ........................................................................................................... 5–24

Blade Safety ................................................................................................................................ 5–24

Blade Service .............................................................................................................................. 5–24

Leveling the Mower Deck ......................................................................................................... 5–27

Removing the Mower Deck...................................................................................................... 5–29

Installing the Mower Deck ........................................................................................................ 5–30

Replacing the Grass Deflector ................................................................................................ 5–31

Cleaning............................................................................................................................................ 5–33

Disposing of Waste .................................................................................................................... 5–33

Chapter 6: Storage............................................................................................................................... 6–1

Storage Safety .................................................................................................................................. 6–1

Preparing the Machine for Storage Over 30 Days.................................................................... 6–1

Storing the Battery............................................................................................................................ 6–3

Battery Storage Tips .................................................................................................................... 6–3

Chapter 7: Troubleshooting ............................................................................................................... 7–1

Chapter 8: Schematics........................................................................................................................ 8–1

Electrical Diagram ............................................................................................................................ 8–1

3464-637 A :

Chapter 1

Introduction

Intended Use

This rotary-blade, riding lawn mower is intended to be used by homeowners in residential

applications. It is designed primarily for cutting grass on well-maintained lawns. Using this

product for purposes other than its intended use could prove dangerous to you and

bystanders.

Read this information carefully to learn how to operate and maintain your product properly

and to avoid injury and product damage. You are responsible for operating the product

properly and safely.

Getting Help

G451770

Visit www.Toro.com for product safety and

operation training materials, accessory

information, help finding a dealer, or to register

your product.

Whenever you need service, genuine Toro parts,

or additional information, contact an Authorized

Service Dealer or Toro Customer Service and have

the model and serial numbers of your product

ready. These numbers are located on the serial

plate on your product . Write the numbers in the

space provided.

IMPORTANT

With your mobile device, you can scan the QR code on the serial number decal (if

equipped) to access warranty, parts, and other product information.

Model

Number:

Serial

Number:

Introduction Page 1–1 3464-637 A

Manual Conventions

This manual identifies potential hazards and has safety messages identified by the safety-

alert symbol, which signals a hazard that may cause serious injury or death if you do not

follow the recommended precautions.

G405934

This manual uses 2 words to highlight information. Important calls attention to special

mechanical information and Note emphasizes general information worthy of special

attention.

Safety Alert Classifications

The safety-alert symbol shown in this manual and on the machine identifies important safety

messages that you must follow to prevent accidents.

Safety-alert symbol appears above information that alerts you to unsafe actions or situations

and is followed by the word DANGER,WARNING, or CAUTION.

DANGER

Danger indicates an imminently hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING

Warning indicates a potentially hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

Caution indicates a potentially hazardous situation which, if not avoided, may result

in minor or moderate injury.

3464-637A Page 1–2 Introduction: Manual Conventions

Chapter 2

Safety

General Safety

This product is capable of amputating hands and feet and of throwing objects. Always follow

all safety instructions to avoid serious personal injury or death.

• Read, understand, and follow the instructions and warnings in this Operator’s Manual

and on the machine, engine, and attachments before starting the engine.

• Do not allow children or untrained people to operate or service the machine. Allow only

people who are responsible, trained, familiar with the instructions, and physically capable

to operate or service the machine.

• Keep bystanders, particularly children, away from the operating area.

• Do not operate the machine near drop-offs, ditches, embankments, water, or other

hazards, or on slopes greater than 15°.

• Do not put your hands or feet near moving parts.

• Do not operate the machine without all safety shields, guards, switches, and other

devices in place and working properly.

• Park the machine on a level surface, disengage the drives, engage the parking brake,

shut off the engine, remove the key, and wait for all moving parts to stop before leaving

the operator’s position.

• Wait for the machine to cool before servicing, adjusting, fueling, cleaning, or storing it.

Safety Page 2–1 3464-637 A

Slope Indicator

You may copy this page for personal use.

G011841s

The maximum slope you can operate the machine on is 15 degrees. Use the slope chart to determine the degree

of slope of hills before operating. Do not operate this machine on a slope greater than 15 degrees. Fold along

the appropriate line to match the recommended slope.

Align this edge with a vertical surface, a tree, building, fence pole, etc.

Example of how to compare slope with folded edge

3464-637A Page 2–2 Safety: Slope Indicator

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area

of potential danger. Replace any decal that is damaged or missing.

Decal Part: 117-1194

s_decal117-1194

Belt routing

Engine

Decal Part: 130-0731

s_decal130-0731

Warning—thrown object hazard;

keep the deflector in place.

Cutting hazard of hand or foot,

mower blade—keep away from moving

parts.

Decal Part: 130-0765

s_decal130-0765

Read the Operator’s Manual.

Height-of-cut selection

Remove the key before performing

maintenance.

Safety: Safety and Instructional Decals Page 2–3 3464-637 A

Decal Part: 132-0872

s_decal132-0872

Thrown object hazard—keep

bystanders away.

Thrown object hazard, mower—do

not operate the machine with an open

deck; use a bagger or a deflector.

Cutting/dismemberment hazard of

hands or feet, mower blade—stay away

from moving parts.

Entanglement hazard of hands,

belt—stay away from moving parts;

keep all guards and shields in place.

Decal Part: 139-2394

s_decal139-2394

Traction controls

Fast

Slow

Neutral

Reverse

Parking brake

Decal Part: 139-2395

s_decal139-2395

Parking brake

Fast

Slow

Neutral

Reverse

Traction controls

3464-637A Page 2–4 Safety: Safety and Instructional Decals

Decal Part: 144-5288

s_decal144-5288

Warning—read the Operator’s

Manual.

Cutting/dismemberment hazard of

the fingers or hand—keep hands away

from moving parts; keep all guards and

shields in place.

Thrown object hazard—keep

bystanders away; pick up debris; keep

the deflector in place.

Runover hazard—do not carry

passengers; look behind you and down

when moving in reverse.

Tipping hazard—when loading onto

a trailer, do not use dual ramps; only

use a singular ramp wide enough for the

machine; do not use a ramp with a

slope greater than 15°; back up the

ramp (in reverse) and drive forward off

the ramp.

Tipping hazard—do not use the

machine near drop-offs with slopes

greater than 15°; only operate across

slopes less than 15°.

Note: This machine complies with the industry standard stability test in the static lateral and

longitudinal tests with the maximum recommended slope indicated on the decal. Review the

instructions for operating the machine on slopes in the Operator’s Manual as well as the

conditions in which you would operate the machine to determine whether you can operate

the machine in the conditions on that day and at that site. Changes in the terrain can result

in a change in slope operation for the machine.

Decal Part: 147-2399

s_decal147-2399

Read the Operator’s Manual.

Warning—Fill to bottom of filler

neck; warning–do not overfill the tank.

Safety: Safety and Instructional Decals Page 2–5 3464-637 A

Decal Part: 147-7571

s_decal147-7571

Fast

Slow

Decal Part: 147-7574

MyRIDE models only

s_decal147-7574

Decal Part: 161-6207

decal161-6207

Bypass lever position for pushing

the machine

Bypass lever position for operating

the machine

3464-637A Page 2–6 Safety: Safety and Instructional Decals

Decal Part: 161-6208

decal161-6208

Height of cut

To release the transport lock—push

the deck-lift pedal forward, move the

transport-lock lever forward, and then

move the deck-lift pedal rearward

toward the desired height of cut.

Safety: Safety and Instructional Decals Page 2–7 3464-637 A

Chapter 3

Product Overview

G453237

Engine

MyRide® suspension

adjustment lever (machines

with MyRide suspension only)

Control panel

Transport lock lever

Deflector

Height-of-cut pin

Deck-lift pedal

Anti-scalp roller

Front caster wheel

Motion-control lever

Fuel-tank cap

Control Panel

G453238

Throttle control

Choke control

Key switch

Blade-control switch (power

takeoff)

Hour meter

3464-637 A Page 3–1 Product Overview

Key Switch

Use the key switch to start or shut off the machine.

G375755s

Shut off the engine

Run the engine

Start engine

Throttle Control

The throttle controls the engine speed, and it has a continuous-variable setting from the

SLOW to FAST position.

G450843

Blade-Control (PTO) Switch

G428617

The blade-control switch, represented by a power-

takeoff (PTO) symbol, engages and disengages

power to the mower blades.

Product Overview: Control Panel Page 3–2 3464-637 A

Choke Control

Use the choke control to aid in starting a cold engine.

G419508

Engaged Disengaged

Hour Meter

The hour meter records the number of hours the engine is running. Use these times for

scheduling regular maintenance.

Motion-Control Levers

Use the motion-control levers to drive the machine forward, reverse, and turn either

direction.

Park Position

G438246

Move the motion-control levers outward from the

center to the PARK position to engage the parking

brake when stopping or exiting the machine.

3464-637A Page 3–3 Product Overview: Control Panel

MyRide® Suspension Adjustment Lever

For Machines with the MyRide Suspension System

Use the adjustment lever to adjust the seat suspension for a smooth and comfortable ride.

G292102s

Adjustment lever

Softer suspension

Firmer suspension

Height-of-Cut Pin

The height-of-cut pin works with the foot pedal to lock the deck in a specific cutting height.

Adjust the height of cut only when the machine is not moving.

Deck-Lift Pedal

Use the deck-lift pedal to briefly raise the mower deck from the seated position to avoid

obstacles or when adjusting the height of cut.

Transport-Lock Lever

Use the transport-lock lever to release the mower deck from the TRANSPORT (fully raised)

position.

G453249

Product Overview: MyRide® Suspension Adjustment Lever Page 3–4 3464-637 A

Fuel Gauge

The fuel gauge displays the amount of fuel in the tank.

G454017

Specifications

Note: Specifications and design are subject to change without notice.

Model 76420 Model 76425 Model 76530 Model 76635

Cutting width 123 cm (48

inches)

123 cm (48

inches)

137 cm (54

inches)

152 cm (60

inches)

Width with

deflector down

163 cm (64

inches)

163 cm (64

inches)

178 cm (70

inches)

192 cm (75-1/2

inches)

Width with

deflector up

138 cm (54-1/2

inches)

138 cm (54-1/2

inches)

152 cm (60

inches)

166 cm (65-1/2

inches)

Length 208 cm (82

inches)

208 cm (82

inches)

208 cm (82

inches)

208 cm (82

inches)

Height 124 cm (49

inches)

127 cm (50

inches)

127 cm (50

inches)

127 cm (50

inches)

Weight 338 kg (746 lb) 354 kg (781 lb) 354 kg (781 lb) 371 kg (817 lb)

Attachments/Accessories

A selection of Toro approved attachments and accessories is available for use with the

machine to enhance and expand its capabilities. Contact your Authorized Service Dealer or

authorized Toro distributor or go to www.Toro.com for a list of all approved attachments and

accessories.

To ensure optimum performance and continued safety certification of the machine, use only

genuine Toro replacement parts and accessories.

3464-637A Page 3–5 Product Overview: Fuel Gauge

Chapter 4

Operation

Before Operation

Before Operation Safety

• Do not allow children or untrained people to operate or service the machine. Local

regulations may restrict the age of the operator. The owner is responsible for training all

operators and mechanics.

• Inspect the area where you will use the machine and remove all objects that could be

thrown or could interfere with the operation of the machine.

• Evaluate the terrain to determine the appropriate equipment and any attachments or

accessories required to operate the machine properly and safely.

• Do not carry passengers on the machine.

• Become familiar with the safe operation of the equipment, operator controls, and safety

signs.

• Check that operator-presence controls, safety switches, and guards are attached and

working properly. Do not operate the machine unless they are functioning properly.

• Wear appropriate clothing, including eye protection; long pants; substantial, slip-resistant

footwear; and hearing protection. Tie back long hair and do not wear loose clothing or

loose jewelry.

• Do not operate the machine unless all guards and safety devices, such as the deflectors

and the entire grass catcher, are in place and functioning properly. Replace worn or

deteriorated parts when necessary.

• Shut off the engine, remove the key, and wait for all moving parts to stop before leaving

the operator’s position. Wait for the machine to cool before servicing, adjusting, fueling,

cleaning, or storing it.

WARNING

Contacting the blade can result in serious personal injury.

When you shut off the engine, the blade(s) should stop. If not, stop using your

machine immediately and contact an Authorized Service Dealer.

• Before mowing, inspect the machine to ensure that the cutting assemblies are working

properly.

• Keep bystanders, particularly children, and pets away from the machine during

operation. Shut off the machine and attachment(s) if anyone enters the area.

Operation Page 4–1 3464-637 A

La page charge ...

Toro Titan ZX4875 Zero Turn Riding Mower Manuel utilisateur

Ce manuel convient également à

Toro Titan ZX4875 Zero Turn Riding Mower Manuel utilisateur

dans d''autres langues

Documents connexes