Hisense HS205 Manuel utilisateur

Catégorie
Récepteurs de musique Bluetooth
Taper
Manuel utilisateur
USER MANUAL
.PEFM)4
$IBOOFM4PVOE#BS)PNF5IFBUFS4ZTUFN
Before using the sound bar, please read this manual
thoroughly and retain it for future reference.
2
Contents
Important Safety Instructions 3
Safety ...........................................................................................................................................................................................3
Warning .......................................................................................................................................................................................4
Package Contents 6
Product Diagram 7
Main Unit ...................................................................................................................................................................................7
Remote Control ........................................................................................................................................................................8
Preparations 8
Prepare the Remote Control ................................................................................................................................................8
Replace the Remote Control Battery ................................................................................................................................ 8
Placement and Mounting .....................................................................................................................................................9
Wall Mounting (if using option-B) .....................................................................................................................................9
Connections 10
Connect to HDMI (ARC) Socket ....................................................................................................................................... 10
Connect to OPTICAL Socket ............................................................................................................................................. 10
Connect to COAXIAL Socket ............................................................................................................................................. 10
Connect to LINE IN Socket................................................................................................................................................. 11
Connect Power ...................................................................................................................................................................... 11
Basic Operation 11
Standby/ON ............................................................................................................................................................................ 11
Select Modes .......................................................................................................................................................................... 11
Adjust the Volume ................................................................................................................................................................ 12
Select a Preset Sound Eect ............................................................................................................................................. 12
LINE IN / OPTICAL / COAXIAL / HDMI ARC Operation 12
Bluetooth Operation 12
Pair Bluetooth-enabled Devices ...................................................................................................................................... 12
Listen to Music from Bluetooth Device ........................................................................................................................13
USB Operation 13
Troubleshooting 14
Specications 15
3
third grounding prong. The wide blade or the
third prong is provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11 Only use attachments/accessories specied by
the manufacturer.
12
Use only with the cart, stand, tripod,
bracket or table specified by the
manufacturer, or sold with the
apparatus. When a cart or rack is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13 Unplug the apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the unit has been exposed to rain
or moisture, does not operate normally, or has
been dropped.
15
This equipment is a Class II or double
insulated electrical appliance. It has been
designed in such a way that it does not require
a safety connection to electrical earth.
16 The apparatus shall not be exposed to
dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the
apparatus.
17 Minimum distance around the apparatus for
sucient ventilation is 5cm.
18 The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers,table-cloths, curtains, etc.
19 No naked flame sources, such as lighted
candles, should be placed on the apparatus.
20 Batteries should be recycled or disposed of as
per state and local guidelines.
21 The use of apparatus in moderate or tropical
climates.
Important Safety Instructions
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude as to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Safety
1 Read these instructions – All the safety and
operating instructions should be read before
this product is operated.
2 Keep these instructionsThe safety and
operating instructions should be retained for
future reference.
3 Heed all warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
4 Follow all instructions – All operating and
usage instructions should be followed.
5 Do not use this apparatus near water – The
appliance should not be used near water or
moisture – for example, in a wet basement or
near a swimming pool and the like.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as
radiators, heaters, stoves, or other apparatus
(including ampliers) that produce heat.
9 Do not defeat the safety purpose of the
polarized or grounding plug. A polarized
plug has two blades with one wider than the
other. A grounding plug has two blades and a
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC
ÉLECTRIQUE NE PAS PUVRIR
4
Caution:
- Use of controls or adjustments or performance
of procedures other than those described
herein, may result in hazardous radiation
exposure or other unsafe operation.
- To reduce the risk of re or electric shock, do
not expose this apparatus to rain or moisture.
The apparatus must not be exposed to
dripping or splashing and objects filled with
liquids, such as vases, must not be placed on
apparatus.
- The mains plug/appliance coupler is used as
the disconnect device, the disconnect device
must remain readily operable.
- Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Warning
The battery (batteries or battery pack) shall not
be exposed to excessive heat such as sunshine,
re or the like.
Before operating this system, check the
voltage of this system to see if it is identical to
the voltage of your local power supply.
Do not place this unit close to strong magnetic
elds.
Do not place this unit on the amplifier or
receiver.
Do not place this unit close to damp areas as the
moisture will aect the life of the laser head.
If any solid object or liquid falls into the
system, unplug the system and have it checked
by qualied personnel before operating it any
further.
Do not attempt to clean the unit with chemical
solvents as this may damage the nish. Use a
clean, dry or slightly damp cloth.
When removing the power plug from the wall
outlet, always pull directly on the plug, never
yank on the cord.
Changes or modifications to this unit not
expressly approved by the party responsible
for compliance will void the user’s authority to
operate the equipment.
The rating label is pasted on the bottom or
back of the equipment.
Battery usage CAUTION
To prevent battery leakage which may result in
bodily injury, property damage, or damage to the
apparatus:
- Install all batteries correctly, + and - as marked
on the apparatus.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (Carbon-Zinc) or
rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
- Remove batteries when the unit is not used for
a long time.
Correct Disposal of this product. This
marking indicates that this product
should not be disposed with other
household wastes throughout the EU.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
We hereby declares that this
product is in compliance with the
essential requirements and other
relevant provisions of Directive
2014/53/EU.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG,. Inc.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.
Roku TV Ready and the Roku TV Ready logo are
trademarks of Roku, Inc.
WARNING: This product contains
chemicals known to the State of California
to cause cancer and birth defects or other
reproductive harm. For more information:
www.watts.com/prop65
5
FCC INFORMATION (for US customers)
Warning:
Changes or modications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
- Consult the dealer or an experienced radio /
TV technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Shielded cables must be used with this unit to
ensure compliance with the Class B FCC limits.
IC Notice:
This device complies with Canada Industry licence-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause interference. and (2) this device must accept
any interference. Including interference that may
cause undesired operation of the device.
CAN ICES-3 (B) / NMB-3 (B)
INFORMATION FCC (pour les clients américains)
Avertissement :
Les changements ou modications de cet appareil
non expressément approuvées par la partie
responsable de la conformité pourraient annuler
l’autorisation de l’utilisateur à utiliser l’équipement.
REMARQUE :
Ce dispositif a été testé et déclaré conforme aux
limites d’un dispositif numérique de classe B,
conformément à la partie 15 des règles de la FCC.
Ces limites sont conçues pour fournir une
protection raisonnable contre les interférences
nuisibles dans une installation résidentielle.
Cet appareil génère, utilise et peut émettre de
l’énergie radiofréquence et, s’il nest pas installé et
utilisé conformément aux instruc t i o n s, i l p e u
t c a u s e r d e s i nte r fé rence s n u i s i b l e s a u
x communications radio.
Cependant, il nest pas garanti que des
interférences ne se produiront pas dans une
installation particulière. Si cet appareil provoque
des interférences nuisibles à la réception radio
ou de télévision, ce qui peut être déterminé en
mettant l’appareil hors tension, l’utilisateur est
encouragé à essayer de corriger l’interférence par
une ou plusieurs des mesures suivantes :
- Réorienter ou déplacer l’antenne de réception.
- Augmenter la distance entre l’appareil et le
récepteur.
- Brancher l’appareil à une prise sur un circuit
diérent de celui sur lequel le récepteur est
branché.
- Consulter le revendeur ou un technicien radio/TV
expérimenté.
Cet appareil est conforme à la partie 15 des règles
de la FCC. Son fonctionnement est soumis aux
deux conditions suivantes :
(1) ce dispositif ne peut pas causer d’interférences
nuisibles et
(2) cet appareil doit accepte r toute inter férence
reçue, y compris les interférences qui peuvent
causer un mauvais fonctionnement.
Des câbles blindés doivent être utilisés avec cet
apparei l pour assurer la conformité avec les
limites de la classe B de la FCC.fonctionnement
de I'appareil.
Avis d’Industrie Canada
Le présent appareil est conforme aux CNR d'industrie
Canada applicables aux appareils radio exem pts
de licence L'exploitation est autorisée aux deux
conditions suivantes: (1) I'appareil ne doit pas produire
de brouillage, et (2) I'utillsateur de I'appareil doit
accepterbrouillage radioélectrique subi meme si
le brouillage est susceptible d'encompromettre le
fonctionnement. mauvais fonctionnement de I'appareil.
EN
FR
6
Package Contents
Design and specications are subject to change without notice.
AC Power Cord Main Unit Remote Control /
AAA Batteries x 2
Bracket(x2) / Wall Plug(x2) / screw(x2) /
bracket screw(x2)
Optical Cable
User Manual/Quick Start Guide/
Wall Mount Guide
HDMI Cable
7
4
5
6
7 1089 11 12
3
1
2
Product Diagram
Main Unit
1 Remote Control Sensor
Receive signal from the remote control.
2 LED Indicators
Red : In STANDBY mode.
Orange / Orange ash : In Optical / Coaxial mode.
Blue : In Bluetooth mode.
White : In HDMI ARC mode.
Green / Green ash : In LINE IN / USB mode.
3 Screws
Remove the screws then install the wall
mounting screws into the back of the unit.
4
(ON/OFF) Button
Switch the unit between ON and Standby mode.
5 +/- (Vol+/Vol-) Buttons
Increase/decrease the volume level.
6
(SOURCE) Button
Select the play function.
7 AC~ Socket
Connect to the power supply.
8 LINE IN Socket
Connect to an external audio device.
9 USB Socket
Insert the USB device to play music.
10 HDMI ARC Socket
Connect to a TV via HDMI cable.
11 COAXIAL Socket
Connect to a coaxial audio output on the TV.
12 OPTICAL Socket
Connect to an optical audio output on the TV.
8
Remote Control
1 Switch the unit between ON and
STANDBY mode.
2
(MUTE) Mute or resume the sound.
3 MOVIE Switch to MOVIE EQ eect.
4 MUSIC Switch to MUSIC EQ eect.
5 VOL+/VOL- Increase/decrease the volume level.
6
/ Skip to previous/next track in BT/USB mode.
7
/PAIR Play/pause/resume playback in BT/USB mode.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect the
existing paired Bluetooth device.
8 NEWS Switch to NEWS EQ eect.
9 HDMI ARC Select the HDMI ARC mode.
10 OPT/COAX Select the OPTICAL/COAXIAL mode.
11
(BT) Select the Bluetooth mode.
12 LINE IN Select the LINE IN mode.
13 USB Select the USB mode.
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
Even if the Remote Control is operated within
the effective range 19.7 feet (6m), remote
control operation may be impossible if there
are any obstacles between the unit and the
remote control.
If the Remote Control is operated near other
products which generate infrared rays, or if
other remote control devices using infra-red
rays are used near the unit, it may operate
incorrectly. Conversely, the other products may
operate incorrectly.
Replace the Remote Control Battery
Precautions Concerning Batteries
Be sure to insert the batteries with correct
positive “
and negative
polarities.
Use batteries of the same type. Never use
dierent types of batteries together.
Either rechargeable or non-rechargeable
batteries can be used. Refer to the precautions
on their labels.
Be aware of your fingernails when removing
the battery cover and the battery.
Do not drop the remote control.
Do not allow anything to impact the remote
control.
Do not spill water or any liquid on the remote
control.
Do not place the remote control on a wet
object.
Do not place the remote control under direct
sunlight or near sources of excessive heat.
Remove the battery from the remote control
when not in use for a long period of time,
as corrosion or battery leakage may occur
and result in physical injury, and/or property
damage, and/or re.
Do not use any batteries other than those
specied.
Do not mix new batteries with old ones.
Never recharge a battery unless it is conrmed
to be a rechargeable type.
1 Press and slide the back
cover to open the battery
compartment of the
remote control.
2 Insert two AAA size
batteries (included). Make
sure the (+) and () ends of
the batteries match the (+)
and (–) ends indicated in
the battery compartment.
3 Close the battery
compartment cover.
Preparations
9
Placement and Mounting
Placement
A If your TV is placed on a table, you can place the
unit on the table directly in front of the TV stand,
centered with the TV screen.
B If your TV is attached to a wall, you can mount
the unit on the wall directly below the TV screen.
Wall Mounting (if using option-B)
Note:
- Installation must be carried out by qualied personnel only. Incorrect assembly can result in severe
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer’s responsibility to verify that the wall will safely support the total load of the unit and wall
brackets.
- Additional tools (not included) are required for the installation.
- Do not overtighten screws.
- Keep this instruction manual for future reference.
- Use an electronic stud nder to check the wall type before drilling and mounting.
AB
1
2
≤8 mm/
0.31"
4mm/
0.16"
≥35 mm/1.4"
4
3
921MM
10
Connections
Connect to HDMI (ARC) Socket
Your Soundbar supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio through
your Soundbar by using a single HDMI cable.
1 Using a High Speed HDMI cable (not
included), connect the HDMI ARC -To TV
connector on your Soundbar to the HDMI
ARC connector on the TV.
- The HDMI ARC connector on the TV might
be labeled dierently. For details, see the
TV user manual.
2 On your TV, turn on HDMI-CEC operations.
For details, see the TV user manual.
Tips:
- Your TV must support the HDMI-CEC and
ARC function. HDMI-CEC and ARC must be
set to On.
- The setting method of HDMI-CEC and
ARC may differ depending on the TV. For
details about ARC function, please refer to
your TV owners manual.
- Only HDMI 1.4 compatible cables can
support the ARC function.
Connect to OPTICAL Socket
- Remove the protective cap of the OPTICAL
socket, then connect an OPTICAL cable
(included) to the TVs OPTICAL OUT socket
and the OPTICAL socket on the unit.
Connect to COAXIAL Socket
You also can use the COAXIAL cable (not
included) to connect the TV's COAXIAL
OUT socket and COAXIAL socket on the
unit.
Tip:
While in OPTICAL or HDMI ARC or
COAXIAL mode, if theres no sound output
from the unit, you may need to activate
PCM Signal output on your source device
(eg. TV, DVD or Blu-ray player).
56:/)'2
.*3/'8)
.*3/'8)
.KGJVNUTK
)5'>/'2
2/4+/4
)5'>/'2
BA
11
Connect to LINE IN Socket
A Use a RCA to 3.5mm audio cable (not
included) to connect the TVs audio output
sockets to the LINE IN socket on the unit.
B Use a 3.5mm to 3.5mm audio cable (not
included) to connect the TVs or external
audio device headphone socket to the LINE
IN socket on the unit.
Connect Power
Risk of product damage!
- Ensure that the power supply voltage
corresponds to the voltage printed on the
back or the underside of the unit.
- Before connecting the AC power cord,
ensure you have completed all other
connections.
Connect the mains cable to the AC~ Socket
of main unit and then into a mains socket.
56:/)'2
.*3/'8)
.*3/'8)
.KGJVNUTK
)5'>/'2
2/4+/4
)5'>/'2
BA
Automatic Power O Function
The unit automatically turns to Standby mode
after about 15 minutes if the TV or the external
unit is disconnected, switched o.
To switch the unit o completely, remove the
mains plug from the mains socket.
Please turn the unit off completely to save
energy when not in use.
Select Modes
Press the (SOURCE) button repeatedly on the
unit or the HDMI ARC,
(Bluetooth), OPTICAL,
COAXIAL, USB and LINE IN buttons on the
remote control to select the desired mode.
The indicator light on the front of the main unit
will show which mode is currently in use.
Basic Operation
Standby/ON
When you rst connect the main unit to the mains
socket, the main unit will be in Standby mode.
Press the
button on the unit or on the
remote control to switch the unit ON.
Press the
button again to switch the unit
back to STANDBY mode.
Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
Auto Wake
If a TV or an external device is connected (LINE
IN / OPTICAL / COAXIAL / HDMI ARC), the unit
will switch on automatically when the TV or
the external device is switched on.
12
Adjust the Volume
Press the VOL+ / VOL- buttons on the unit or on
the remote control to adjust the volume.
If you wish to turn the sound off, press the
button on the remote control. Press the
button
again or press the VOL+ / VOL- buttons to resume
normal listening.
Note: While adjusting the volume, the status LED
indicator will ash quickly. When the volume has
hit maximum/minimum value level, the status LED
indicator will ashes once.
Select a Preset Sound Eect
While playing, press the MOVIE / MUSIC / NEWS
buttons on the remote control to select the preset
equalizers:
MOVIE (recommended for viewing movie)
MUSIC (recommended for listening to music)
NEWS (recommended for listening to news)
LINE IN / OPTICAL / COAXIAL / HDMI ARC Operation
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the
button repeatedly on the unit or the
LINE IN, OPTICAL, COAXIAL, HDMI ARC button
on the remote control to select the desired mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL +/– button to adjust the volume
to your desired level.
Tip:
While in OPTICAL or HDMI ARC or COAXIAL
mode, if theres no sound output from the unit,
you may need to activate PCM Signal output
on your source device (eg. TV, DVD or Blu-ray
player).
Bluetooth Operation
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to
this player, you need to pair your device to this player.
Note:
- The operational range between this player
and a Bluetooth device is approximately 26
feet (8m) (without any object between the
Bluetooth device and the unit).
- Before you connect a Bluetooth device to this
unit, ensure you know the devices capabilities.
- Compatibility with all Bluetooth devices is not
guaranteed.
- Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
- If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 During ON mode, press the
button
repeatedly on the unit or the
button on the
remote contro to select Bluetooth mode. The
Blue indicator will light ash.
2 Activate your Bluetooth device and select the
search mode. “Hisense HS205 will appear on
your Bluetooth device list.
If you cannot nd the unit, press and hold the
/PAIR button on the remote control to be
searchable. The system has entered pairing
mode.
You will hear audio prompt from the unit and
the Bluetooth indicator will ash quickly.
3 Select Hisense HS205 in the pairing list.
After audio prompt, the system is successfully
connected and the Bluetooth indicator will
light up solidly.
4 Play music from the connected Bluetooth device.
13
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device.
The Bluetooth device will be disconnected from
the soundbar after audio prompt.
- Press and hold the
/ PAIR button on the
remote control.
Tips:
Enter "0000" for the password if necessary.
If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
The player will also be disconnected when your
device is moved beyond the operational range.
If you want to reconnect your device to this
player, place it within the operational range.
If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
If the connection is lost, follow the instructions
above to pair your device to the player again.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
- If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the
player's remote control to play music stored on
the device.
1 Pair your device with the player.
2 Play music via your device (if it supports A2DP).
3 Use supplied remote control to control play
(if it supports AVRCP).
- To pause/resume play, press the
/ PAIR
button on the remote control.
- To skip to a track, press the
/ buttons on
the remote control.
USB Operation
1 Insert the USB device.
2 Press the
button repeatedly on the unit or
press the USB button on the remote control to
select USB mode.
3 During playback:
- To pause or resume play, press the
/PAIR
button on the remote control.
- To skip to the previous/next file, press the
/ buttons on the remote control.
Tips:
The unit can support USB devices with up to
32 GB of memory.
This unit can play MP3.
The unit support FAT32.
14
Troubleshooting
I can’t find the Bluetooth name of
this unit on my Bluetooth device for
Bluetooth pairing
Ensure the Bluetooth function is activated on
your Bluetooth device.
Ensure you have paired the unit with your
Bluetooth device.
This is a 15 mins power off function,
one of the ERPII standard requirement
for saving power
When the unit's external input signal
level is too low, the unit will be turned off
automatically in 15 minutes. Please increase
the volume level of your external device.
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
Ensure that the AC cord of the apparatus is
properly connected .
Ensure that there is power at the AC outlet.
Press standby button to turn the unit on.
Remote control does not work
Before you press any playback control button,
rst select the correct source.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/-)
aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor
on the front of the unit.
No sound
Increase the volume. Press Volume Up on the
remote control or on the soundbar.
Press MUTE on the remote control to ensure
the soundbar is not muted.
Press source buttons to select a dierent input
source.
When using either of the Digital inputs, if there
is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source,
some TVs do not pass through digital audio.
Your TV may be set to variable audio output.
Conrm that the audio output setting is set to
FIXED or STANDARD, not VARIABLE. Consult
your TVs user manual for more detailed
information.
If using Bluetooth, ensure that the volume on
your source device is turned up and that the
device is not muted.
15
Specications
Model Name HS205
Soundbar
Power Supply AC100-240V~ 50/60Hz
Power Consumption 30W
Standby Power < 0.5 W
USB port for playback
USB Compatibility
USB Playback support / le formats
5V
0.5A
Hi-Speed USB (2.0) / FAT32
32G (max) , MP3
Dimension (WxHxD) 37.4 x 2.6 x 2.4 inches / (950 x 66 x 60 mm)
Net weight 3.3 lbs / (1.5 kg)
Impedance 8Ω x 2
Audio input sensitivity 500mV
Frequency Response 40Hz - 20kHz
Wireless Specication
Bluetooth Version V 4.2
Bluetooth Maximum power transmitted 5 dBm
Frequency bands 2402 MHz ~ 2480 MHz
Amplier (Outputpower)
Sound bar 30W x 2 (@10%THD)
Total 60W
Remote Control
Distance/Angle 6m / 30°
Battery type AAA (1.5V X 2)
HS205
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Hisense HS205 Manuel utilisateur

Catégorie
Récepteurs de musique Bluetooth
Taper
Manuel utilisateur

dans d''autres langues