Samsung PS42A426C1M Manuel utilisateur

imagine the possibilities

Plasma TV

user manual

BN68-01786A-01

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care centre.

Country

Customer Care Centre 

Web Site

AUSTRIA 0800-SAMSUNG(726-7864) www.samsung.com/at

BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be

CZECH REPUBLIC

844 000 844 www.samsung.com/cz

Distributor pro Českou republiku:

Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4

DENMARK 70 70 19 70 www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

ESTONIA 800-7267 www.samsung.ee

FINLAND 030-6227 515 www.samsung.com/fi

FRANCE

"3260 SAMSUNG (€ 0,15/Min)

08 25 08 65 65 (€ 0,15/Min)"

www.samsung.com

GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.com

HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com

ITALIA 800-SAMSUNG(726-7864) www.samsung.com

KAZAKHSTAN 8-10-800-500-55-500 www.samsung.kz

KYRGYZSTAN 00-800-500-55-500 -

LATVIA 800-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be

NETHERLANDS 0900-SAMSUNG (726-7864 € 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND

"0 801 801 881

022-607-93-33"

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG(726-7864) www.samsung.com/pt

RUSSIA 8-800-555-55-55 www.samsung.com

SLOVAKIA 0800-SAMSUNG(726-7864) www.samsung.com/sk

SPAIN 902 10 11 30 www.samsung.com

SWEDEN 0771-400 200 www.samsung.com/se

SWITZERLAND 0800-SAMSUNG(726-7864) www.samsung.com/ch

TURKEY 444 77 11 www.samsung.com

TADJIKISTAN 8-10-800-500-55-500 -

U.K 0845 SAMSUNG (7267864) www.samsung.com

UKRAINE 8-800-502-0000 www.samsung.com

UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz

Thank you for purchasing this Samsung product.

To receive more complete service, please

register your product at

www.samsung.com/global/register

Model Serial No.

BN68-01786A-Eng.indb 1 2008-08-29 오후 3:20:25

English - 2

User Instructions

 Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the

plasma monitor panel for more than 2 hours as it can cause screen image retention. This image

retention is also known as “screen burn”. To avoid such image retention, reduce the degree of

brightness and contrast of the screen when displaying a still image.

 Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place

over 2000m in height so do not install and operate there.

 Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel

through the vent hole in the upper part of the product. This is normal and does not indicate any defect

or operation failure of the product. However, children should be prevented from touching the upper

part of the product.

 The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding

environment such as temperature or humidity. This is normal and not a defect of the unit.

 Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require

sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.

These pixels will have no impact on the performance of the product.

 Avoid operating the TV at temperatures below 5°C(41°F)

 A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces

of borders displayed on the left, right and centre of the screen caused by the

difference of light emission on the screen. Playing a DVD or a game console

may cause similar effect to the screen. Damages caused by the above effect are

not covered by the Warranty.

 Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may

produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when

displaying still images.

 Warranty

- Warranty does not cover any damage caused by image retention.

- Burn-in is not covered by the warranty.

 Installation

Be sure to contact an authorized service centre, when installing your set in a location with heavy

dust, high or low temperatures, high humidity, chemical substance and where it operates continually

such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)

digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive

DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be

available in some countries.

BN68-01786A-Eng.indb 2 2008-08-29 오후 3:20:25

English - 3

Symbols

☛ ➢

Press

Important

Note

Contents

General Information

 User Instructions ............................................. 2

 Checking Parts ................................................ 4

 Using the Stand-Base ..................................... 4

 Control Panel ................................................. 5

 Connection Panel ............................................ 6

 Viewing the Remote Control ........................... 8

Operation

 Switching Your Television On and Off ............. 9

 Viewing the Menus .......................................... 9

 Plug & Play Feature ...................................... 10

 Using the TOOLS Button .............................. 12

 Viewing External Signal Sources .................. 12

 Editing Device Names ................................... 13

Channel Control

 Storing Channels Automatically .................... 14

 Storing Channels Manually ........................... 15

 Viewing the EPG (Electronic Programme

Guide) Information ........................................ 16

 Erasing and Adding Channels ....................... 17

 Setting Your Favourite Channels .................. 18

 Reserving a Program (Time Viewing) ........... 19

 Conrming a Viewing Reservation ................ 20

 Assigning Names to Channels ...................... 21

 Sorting the Stored Channels-Analog ............ 22

 Selecting and Deselecting All Channels ....... 23

 Storing Channels in Memory (Auto Store) .... 23

 Setting the Channel Mode ............................ 23

 Locking channels .......................................... 24

 Fine Tuning Analog Channels ....................... 24

 Viewing Signal Information ...........................25

 LNA (Low Noise Amplier) ............................ 25

Picture Control

 Changing the Picture Standard ..................... 26

 Customizing the Picture Settings .................. 26

 Conguring Detailed Settings on the Picture 27

 Picture Options .............................................28

 Resetting the Picture Settings to the Factory

Defaults ......................................................... 30

Sound Control

 Sound Features ............................................31

 Selecting the Sound Mode

(depending on the model) ............................. 33

 Connecting Headphones (Sold separately) .. 33

Function Description

 Time Features ............................................... 34

 Language / Change PIN / Parental Lock /

Subtitle / Teletext Language / Preference /

Melody / Entertainment / Energy Saving /

Light Effect .................................................... 35

 Upgrading the Software... ............................. 38

 Common Interface ........................................39

PC Display

 Setting up Your PC Software

(Based on Windows XP) ............................... 40

 Input Mode (PC) ............................................ 41

 Setting the PC ............................................... 42

Appendix

 Teletext Feature (depending on the model) .. 44

 Wall Mount Kit Specications (VESA) ........... 46



Auto Wall- mount adjustment (Sold separately)

. 47

 How to assemble the Stand-Base

(depending on the model) ............................. 48

 Securing the TV to the Wall .......................... 49

 Troubleshooting ............................................50

 Specications ................................................ 51

English

BN68-01786A-Eng.indb 3 2008-08-29 오후 3:20:26

English - 4

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries

Power Cord Cloth-Clean Warranty Card/

Safety Guide Manual

(Not available in all locations)

Cover-Bottom / Screws (2ea)

(Refer to page 50)

Ferrite Core for

Power Cord

Ferrite Core for

S-Video

Cable Tie

Sold Separately

Antenna Cable Component Cables Audio Cables PC Cable

Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable

➢

Ferrite Core (Power Cord, S-Video)

The ferrite cores are used to shield the cables from

interference.

When connecting a cable, open the ferrite core and clip it

around the cable near the plug.

Using the Stand-Base

➢





Two or more people should carry

the PDP. Never lay the PDP on the

floor because of possible damage

to the screen. Always keep the

PDP upright.







The PDP can rotate 20 degrees in

right and left directions.

-20° ~ 20°

BN68-01786A-Eng.indb 4 2008-08-29 오후 3:20:28

English - 5

Control Panel

1

SOURCE

Toggles between all the available input

sources (TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2/DVI,

).

2

MENU

Press to see an on-screen menu of your TV’s

features.

3

– +

Press to increase or decrease the volume. In

the on-screen menu, use the – + buttons

as you would use the ◄ and ► buttons on

the remote control.

4

C/P.

Press to change channels. In the on-screen

menu, use the C/P. buttons as

you would use the ▲ and ▼ buttons on the

remote control.

5

ENTER

In the on-screen menu, use this button as you

would use the ENTER button on the remote

control.

6

POWER

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on

the TV.

7

Speakers

Front Panel

➢

The product colour and shape may vary depending on the model.

BN68-01786A-Eng.indb 5 2008-08-29 오후 3:20:29

English - 6

Connection Panel

Continued...

☛





Whenever you connect an audio or video system to your set, ensure that all elements are

switched off.







When connecting an external device, match the colour of the connection terminal to the cable.

1

POWER IN

Connect the supplied power cord.

2

COMPONENT IN

Audio (AUDIO L/R) and video (Y/P

B/PR) inputs

for Component.

3

PC IN(PC) / AUDIO

Connect to the video and audio output jack on

your PC.

4

EXT 1, EXT 2

Inputs or outputs for external devices, such as

VCR, DVD, video game device or video disc

players.

Input/Output Specification

Connector

Input Output

Video Audio(L/R) RGB

Video + Audio(L/R)

EXT 1

✔ ✔ ✔

Only TV or DTV

output is available.

EXT 2

✔ ✔

Output you can

choose.

5

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

6

AUDIO OUT(AUDIO R/L)

Connect RCA audio signals from the TV to an

external source, such as Audio equipment.

7

SERVICE

− Connector for service.

− Connect the serial jack between the

electro-motion wall mount bracket and your

TV when you want to adjust the TV viewing

angle using your remote control.

Rear Panel

➢

The product colour and shape may vary depending on the model.

Cable Television

Network

or

1

432 6 85

9

7

BN68-01786A-Eng.indb 6 2008-08-29 오후 3:20:31

English - 7

8

HDMI IN 1,2

− No additional Audio connection is needed

for an HDMI to HDMI connection.

−

When using an HDMI/DVI cable connection,

you must use the HDMI IN 2 jack.

➢

What is HDMI?

−

“High Definition Multimedia interface” allows

the transmission of high definition digital

video data and multiple channels of digital

audio.

−

The HDMI/DVI terminal supports DVI

connection to an extended device with

the appropriate cable (not supplied). The

difference between HDMI and DVI is that

the HDMI device is smaller in size, has

the HDCP (High Bandwidth Digital Copy

Protection) coding feature installed, and

supports multi - channel digital audio.

DVI IN(HDMI2) AUDIO L/R

DVI audio outputs for external devices.

9

ANT IN

75Ω Coaxial connector for Aerial/Cable

Network.

Supported modes for HDMI/DVI and Component

480i 480p 576i 576p 720p 1080i

HDMI/DVI 50Hz X X X O O O

HDMI/DVI 60Hz X O X X O O

Component O O O O O O

1

COMMON INTERFACE Slot

Insert CI (Common Interface) card into the slot.

(refer to page 39)

− When not inserting “CI CARD” in some

channels, “Scramble Signal” is displayed

on the screen.

− The pairing information containing a

telephone number, CI CARD ID, Host ID,

and other information will be displayed in

about 2~3 minutes. If an error message

is displayed, please contact your service

provider.

− When the channel information

configuration has finished, the message

“Updating Completed” is displayed,

indicating that the channel list is now

updated.

➢

Insert the CI-Card in the direction marked on it.

2

SERVICE

For service only.

3

S-VIDEO or VIDEO / AUDIO L/R

Video (S-Video or Video) and audio inputs

for external devices, such as a camcorder or

VCR.

4

HEADPHONES JACK

You can connect a set of headphones if you

wish to watch a television programme without

disturbing the other people in the room.

➢

Prolonged use of headphones at a high

volume may damage your hearing.

➢

The product colour and shape may vary depending on the model.

or

4

3

2

Side Panel

1

BN68-01786A-Eng.indb 7 2008-08-29 오후 3:20:32

English - 8

Viewing the Remote Control

The performance of the remote control may be affected by bright light.

1 POWER button

(turns the TV on and off)

2 Selects the TV and DTV

mode directly

3 Number buttons for direct

channel access

4 One/Two-digit channel

selection

5 Temporary sound switch-off

6 Volume increase

Volume decrease

7 Use to quickly select

frequently used functions.

8 Control the cursor in the

menu

9 Use to see information on

the current broadcast

@ Electronic Program Guide

(EPG) display

# Available source selection

$ Previous channel

% Next channel

Previous channel

^ Returns to the previous

menu

& Exit the on-screen menu

* Displays the main on-

screen menu

( Picture size selection

) Channel control button

(Refer to page 17)

a Digital subtitle display

Teletext Functions

(Refer to page 44)

2

Exit from the teletext

display (depending on the

model)

7

Teletext size

9

Teletext reveal

0

Fastext topic selection

!

Teletext display/mix both

teletext information and

the normal broadcast

@

Teletext store

#

Teletext mode selection

(LIST/FLOF)

$

Teletext sub page

%

P :Teletext next page

P :Teletext previous

page

^

Teletext hold

&

Teletext cancel

*

Teletext index

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

BN68-01786A-Eng.indb 8 2008-08-29 오후 3:20:33

English - 9

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as

shown in the figure.

2 Install two AAA size batteries.

➢

Make sure to match the “+” and “–” ends of the

batteries with the diagram inside the compartment.

Do not mix battery types, i.e. alkaline and manganese.

3 Close the cover as shown in the figure.

➢

Remove the batteries and store them in a cool and dry

place if you won’t be using the remote control for a long

time. The remote control can be used up to about 23 feet

from the TV. (Assuming typical TV usage, the batteries last

for about one year.)

➢

If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

➢

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on

the remote control to switch the television on. The channel that you were watching last is re-selected

automatically. If you have not yet stored any channels, no clear picture appears. Refer to Storing

Channels Automatically on page 14 or Storing Channels Manually on page 15.

➢

If the television is initially powered on, several basic customer settings proceed automatically.

Refer to Plug & Play Feature on page 10.

3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press

the POWER button on the remote control.

4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER

button or number buttons on the remote control.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen.

Its left side has six icons: Picture, Sound, Channel, Setup

and Input.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Mode : Standard

Cell Light : 7

Contrast : 95

Brightness : 45

Sharpness : 20

Colour : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

BN68-01786A-Eng.indb 9 2008-08-29 오후 3:20:34

English - 10

Continued...

Plug & Play Feature

When the television is initially powered on, several basic customer settings proceed automatically

and subsequently. The following settings are available.

☛

If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly

displayed.

☛

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)

digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive

DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not

be available in some countries.

The Screen Saver is activated if there is no remote control key input for longer than 1 minute while

Plug & Play is running.

1 If the television is in standby mode, press the POWER

button on the remote control. The message Les menus

Langue, Enr. démo, Canaux et Heure seront définis. is

displayed.

2 Press the ENTER button, then Select the OSD

Language. menu is automatically displayed. Press the

ENTER button.

3 Select the appropriate language by pressing the ▲ or ▼

button. Press the ENTER button to confirm your choice.

The message Select ‘Home Use’ when installing this

TV in your home. is displayed.

4 Press the ◄ or ► button to select Store Demo or Home

Use, then press the ENTER button. The message to

check the connected status of the antenna is displayed.

➢

The default selection is Home Use.

➢

We recommend setting the TV to Home Use mode

for the best picture in your home environment.

➢

Store Demo mode is only intended for use in retail

environments.

➢

If the unit is accidentally set to Store Demo mode

and you want to return to Home Use (Standard):

Press the Volume button on the TV. When the

volume OSD is displayed, press and hold the MENU

button on the TV for 5 seconds.

5 Press the ▲ or ▼ button to select the channel source to

memorize. Press the ENTER button to select Start.

Digital & Analogue: Digital and Analog channels.

Digital: Digital channels.

Analogue: Analog channels.

The channel search will start and end automatically.

Press the ENTER button at any time to interrupt the

memorization process.

After all the available channels are stored, the message

Set the Clock Mode is displayed.

Plug & Play

Les menus Langue, Enr. démo, Canaux et Heure seront définis.

Entrer

OK

Plug & Play

Select “Home Use” when installing this TV in your home.

Home Use

Store Demo

Enter

Move

Plug & Play

Auto Store in progress. Channel 6

Stop

Enter Skip

Digital Channels : 0

Analogue Channels : --

1%

Plug & Play

Select the OSD Language.

Enter

Menu Language : English

Move

Nederlands

English

Suomi

Plug & Play

Select the channel source to memorize.

Digital & Analogue

Digital

Analogue

Start

Enter Skip

Start

Move

BN68-01786A-Eng.indb 10 2008-08-29 오후 3:20:34

English - 11

➢

To stop the search before it has finished, press the

ENTER button with stop selected.

Press the ◄ or ► button to select Yes, then press

the ENTER button. The Auto Store menu then

reappears. Press the ENTER button when channel

memorization is completed.

6 The message Set the Clock Mode is displayed. Press

the ENTER button. Press the ▲ or ▼ button to select

Manual for setting the current time manually, then press

the ENTER button. The message Set current date and

time. is displayed.

➢

If you select Auto, the message Enjoy your viewing

is displayed. If you have received a digital signal, the

time will be set automatically.

7 Press the ◄ or ► button to move to Day, Month, Year,

Hour or Minute. Set the date and time you want by

pressing the ▲ or ▼ button, then press the ENTER

button.

➢

You can set the Day, Month, Year, Hour and Minute

directly by pressing the number buttons on the

remote control.

8 The message Enjoy your viewing. is displayed. When

you have finished, press the ENTER button.

➢

Even if the ENTER button is not pressed, the

message will automatically disappear after several

seconds.

If you want to reset this feature …

1

Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Setup, then press the

ENTER button.

3 Press the ENTER button again to select Plug & Play.

4 Enter your 4 digit PIN number. The default PIN number of

a new TV set is 0-0-0-0.

➢

When there is a locked channel by Channel Lock

setting, PIN input screen appears. (refer to page 24)

➢

For further details on setting up options, refer to the

pages 10~11.

➢

The Plug & Play feature is only available in the TV mode.

Plug & Play

Auto Store is completed.

Digital Channels : 20

Analogue Channels : 36

OK

Enter Skip

Plug & Play

Set the Clock Mode.

Clock Mode : Auto

Auto

Manual

OK

Plug & Play

Enjoy your Viewing.

Plug & Play

Set current date and time

01

Day

01

Month

20 08

Year

Hour

00

Minute

SkipEnter

AdjustMove

00

Plug & Play ►

Language : English

Time

Change PIN

Parental Lock

Subtitle

Teletext Language : ----

Preference

Setup

EnterMove

Skip

BN68-01786A-Eng.indb 11 2008-08-29 오후 3:20:35

English - 12

Viewing External Signal Sources

You can switch between viewing signals from connected

equipment, such as a VCR, DVD, Set-Top Box, and the TV

source.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER button.

3 Press the ENTER button again to select Source List.

4 Press the ▲ or ▼ button to select the signal source, then

press the ENTER button.

➢

Using the Color buttons on the remote with the Source list.

• Red (Refresh): Refreshes the connecting external

devices.

• TOOLS (Option): Displays the Edit Name and

information menus.

Available signal sources: TV, Ext1, Ext2, AV, S-Video,

Component, PC, HDMI1, HDMI2/DVI.

➢

You can choose only those external devices that are connected to

the TV.

➢

You can select these options simply by pressing the

SOURCE button on the remote control.

➢

To watch television programme again, press the TV/DTV

button and select the channel number required.

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The

“Tools” menu changes depending on which external input mode you are viewing.

1 Press the TOOLS button.

The Tools menu will appear.

2 Press the ▲ or ▼ button to select a menu, then press the

ENTER button.

3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or

use the selected items.

For a more detailed description of each function, refer to the

corresponding page.

• Picture Mode, see page 26

•

Sound Mode, see page 31

•

Sleep Timer, see page 34

• SRS TS XT, see page 31

•

Energy Saving, see page 37

• Dual I II, see page 33

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

Source List

Edit Name

Input

Tools

Picture Mode : Dynamic

Sound Mode : Standard

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual I II : Mono

Move Enter Exit

TV

Ext.1

----

Ext.2

----

AV

----

S-Video

----

Component

----

PC

----

Refresh Option

BN68-01786A-Eng.indb 12 2008-08-29 오후 3:20:36

English - 13

Editing Device Names

You can give a name to the external source.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Edit Name, then press

the ENTER button.

4 Press the ▲ or ▼ button to select the external source to

be edited, then press the ENTER button.

5 Select the required device by pressing ▲ or ▼, then press

the ENTER button.

Available device names:

VCR, DVD, Cable STB, Satellite

STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,

IPTV, Blu-Ray, HD DVD, Digital Media Adapter.

6 Press the EXIT button to exit.

Input

Source List

Edit Name ►

Edit Name

Ext.1 :

----

►

Ext.2 :

----

AV :

----

S-Video :

----

Component :

----

PC :

----

HDMI1 :

----

Enter ReturnMove

Edit Name

Ext 1 :

----

Ext 2 :

----

AV :

----

S-Video :

----

Component :

----

PC :

HDMI1 :

Enter ReturnMove

----

VCR

DVD

Cable STB

Satellite STB

PVR STB

BN68-01786A-Eng.indb 13 2008-08-29 오후 3:20:36

English - 14

Storing Channels Automatically

You can scan for the frequency ranges available to you (availability depends on your country).

Automatically allocated programme numbers may not correspond to actual or desired programme

numbers. However you can sort numbers manually and clear any channels you do not wish to

watch.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Auto Store, then press

the ENTER button.

4 Press the ▲ or ▼ button to select the channel source to

memorize. Press the ENTER button to select Start.

➢

Digital & Analogue: “Digital” and “Analogue”

channels.

Digital: “Digital” channels.

Analogue: “Analogue” channels.

➢

Scans for all channels with active broadcast stations

and stores them in the TV’s memory.

➢

If you want to stop Auto Store, press the ENTER

button.

The Stop Auto Store? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press

the ENTER button.

5 Press the EXIT button to exit.

➢

When there is a locked channel by Channel Lock

setting, PIN input screen appears. (refer to page 24)

Channel

Auto Store

►

Manual Store

Full Guide

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Auto Store

Auto Store in progress.

Digital Channels : 0

Analogue Channels : 0

Start

Enter Return

0%

Auto Store

Auto Store is completed.

Digital Channels : 20

Analogue Channels : 36

Enter

OK

Return

Select the channel source to memorize.

Digital & Analogue

Digital

Analogue

Auto Store

Move

Start

Enter Skip

BN68-01786A-Eng.indb 14 2008-08-29 오후 3:20:37

English - 15

Storing Channels Manually

You can store television channels, including those received via cable networks.

When storing channels manually, you can choose:

 Whether or not to store each of the channels found.

 The programme number of each stored channel which you wish to identify.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Manual Store, then press

the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER button.

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.

Digital Channel

 Channel

Press the ▲, ▼ or numeric buttons (0~9) to select a channel.

The available channels are 5~69. The corresponding frequency

for the selected channel is automatically set

 Frequency

You can specify the frequency (KHz) using the numeric buttons

(0~9). If you do not know the exact frequency, follow the above

step to select the frequency automatically using channel.

 Bandwidth

Press the ▲ or ▼ button to select a bandwidth. The available

bandwidths are 7 and 8 MHz.

Analog Channel

 Programme (Programme number to be assigned to a

channel)

Press the ▲ or ▼ button until you find the correct number.

➢

You can also select the channel number directly by

pressing the numeric buttons (0~9).

 Colour System: Auto/PAL/SECAM/NTSC4.43

Press the ▲ or ▼ button to select the required colour standard.

 Sound System: BG/DK/I/L

Press the ▲ or ▼ button to select the required sound standard.

 Channel (When you know the number of the channel to be

stored)

Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

Press the ► button, then press the ▲ or ▼ button to select the

required number.

➢

You can also select the channel number directly by pressing the numeric buttons (0~9).

➢

If there is abnormal sound or no sound, re-select the sound standard required.

 Search (When you do not know the channel numbers)

Press the ▲ or ▼ button to start the search.

The tuner scans the frequency range until the first channel or the channel that you selected is received on

the screen.

 Store (When you store the channel and associated programme number)

Set to OK by pressing the ENTER button.

➢

Channel mode

-

P (Programme mode): When completing tuning, the broadcasting stations in your area have been

assigned to position numbers from P00 to P99. You can select a channel by entering the position

number in this mode.

-

C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

-

S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

Channel

Auto Store

Manual Store ►

Full Guide

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Digital Channel

Analog Channel

Channel

Auto Store

Manual Store ►

Full Guide

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Manual Store

17 8 7 5 0 KH z

Frequency

8 MHz

Bandwidth

5

Channel

ReturnSearchAdjustMove

Manual Store

ReturnAdjustMove

AU TO

Colour System

BG

Sound System

1

Programme

40 M H z

Search

?

Store

C

--

Channel

BN68-01786A-Eng.indb 15 2008-08-29 오후 3:20:37

English - 16

Viewing the EPG (Electronic Programme Guide) Information

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme

entries may appear blank or out of date as a result of the information broadcast on a given

channel. The display will dynamically update as soon as new information becomes available.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Full Guide, Mini Guide

or Default Guide then press the ENTER button.

Full Guide

For the six channels indicated in the left-hand column,

displays the Current programme and the Next programme

information.

➢

One hours of programme information is displayed

which may be scrolled forwards or backwards in time.

Mini Guide

The information of each program is displayed by each line

on the current channel Mini Guide screen from the current

program onwards according to the program starting time

order.

▲/▼/◄/►,

(ENTER)

Select a programme by pressing the ▲

/▼/◄/► button.

If the next progrmme is selected, it is

scheduled with the clock icon displayed.

If the ENTER button is pressed again,

press the ▲/▼/◄/► button to select

Cancel Schedules, the scheduling is

canceled with the clock icon gone.

For details about scheduling

programmes, refer to the section.

RED

Toggle between the Mini Guide or Full

Guide.

GREEN

Full Guide: Scroll backwards quickly (24

hours).

Mini Guide: Display next page quickly.

YELLOW

Full Guide: Scroll forwards quickly (24

hours).

Mini Guide: Display previous page

quickly.

BLUE Exit the guide.

INFO

INFO button for the detailed information.

Channel Number, Running Time, Status

Bar, Parental Level, Video Quality

Information (HD/SD), Sound Modes,

Subtitle or Teletext, languages of Subtitle

or Teletext and brief summary of the

highlighted programme are included

on the detailed information. “…” will be

appeared if the summary is long.

Default Guide: Mini Guide/Full Guide

Press the ▲ or ▼ button to select Mini Guide or Full

Guide. Press the ENTER button. The selected guide menu

is displayed.

➢

You can also display the guide menu simply by

pressing the GUIDE button.

Channel

Full Guide

Mini Guide

Default Guide

: Mini GuideMini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Signal Information

LNA : Off

Mini Guide

Full Guide

Channel

Auto Store

Manual Store

Full Guide

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Signal Information

Channel

Manual Store

Full Guide

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Signal Information

LNA : Off

Full Guide

Mini Guide

Watch

Exit

DTV 805 BBCi

BBCi

18:00~0:00

BBCi-featuring news, sport, weather and TV.

18:08 Fri 5 Aug

Today 18:00~19:00 19:00~20:00

▲

801 BBC NEWS 24 BBC Ne.. BBC News

802 BBC ONE BBC Ne.. Departure Lounge

803 BBC THREE

This is BBC THREE

The 7 O’..

804 BBC THREE

This Weakest L..

Tsunami..

805 BBCi

BBCi

▼

806 Canal 7

No Information

INFO

information

+24 Hours

Full Guide Exit

Mini Guide DTV 801 BBC NEWS 24

18:00 BBC News

18:30 Sportsday

19:00 BBC News

Watch

INFO

information

English - 17

Erasing and Adding Channels

You can delete or add a channel to display the channels you want.

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

Press the ▲ or ▼ button to select Channel List, then press

the ENTER button.

2 Press the ◄ button to select Added Channels.

3 Press the ▲ or ▼ button to select All Channels.

➢

Shows all currently available channels.

Press the ENTER button.

4 Press the ▲ or ▼ button to select a channel to delete, then

press the TOOLS button.

5 Press the ENTER button to select Delete.

➢

All deleted channels will be shown on Added Channels

menu.

6 Press the EXIT button to exit.

➢

You can also add a channel to the All Channels menu

in the same manner.

➢

A channel must be deleted before it can be added back

to the Added Channels list.

➢

To Add (Restore) a channel back to the Added Channel

List, follow steps 1-3 above, press the ▲ or ▼ button to

select a channel to add, the press the TOOLS button.

Press the ENTER button to select Add.

➢

Press the CH LIST button on the remote control to bring

up the channel lists.

Channel

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Signal Information

LNA : Off

824 UKTV Gold

825 UKTV style

1 C --

2 C --

3 C --

4 C --

5 C --

6 C --

7 C --

8 C --

All Channels

Delete

Add to Favourite

Timer Viewing

Edit Channel Name

Sort

Select All

▼

All

Channel Type

Zoom

Select Option

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

BN68-01786A-Eng.indb 17 2008-08-29 오후 3:20:39

English - 18

Setting Your Favourite Channels

You can set channels you watch frequently as favourites.

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

Press the ▲ or ▼ button to select Channel List, then press

the ENTER button.

2 Press the ◄ button to select Added Channels.

3 Press the ▲ or ▼ button to select All Channels, then press

the ENTER button.

➢

Shows all currently available channels.

4 Press the ▲ or ▼ button to select a channel as a favourite

channel.

➢

Adding multiple channels to Favourite.

Press the ▲ or ▼ button to select the desired channel

in the channel list. Then press the yellow button.

Repeat the above operation to select multiple

channels. The ✓ mark appears to the left of the

selected channels.

5 Press the TOOLS button.

6 Press the ▲ or ▼ button to select Add to Favourite, then

press the ENTER button.

The “♥” symbol will be displayed and the channel will be set as a favourite.

7 To cancel your favourite channel selection, press the TOOLS button when a favourite channel is

selected. Press the ▲ or ▼ button to select Delete from Favourite, then press the ENTER button.

The channel is deleted from Favourites and the “♥” mark disappears.

Press the EXIT button to exit.

➢

You can also Add or Delete a channel from Favourites in the Added Channels menu in the

same manner.

➢

All favourite channels will be shown on Favourite

menu.

➢

Press the CH LIST button on the remote control to bring

up the channel lists.

Channel

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Signal Information

LNA : Off

824 UKTV Gold

825 UKTV style

1 C --

2 C --

3 C --

4 C --

5 C --

6 C --

7 C --

8 C --

All Channels

Delete

Add to Favourite

Timer Viewing

Edit Channel Name

Sort

Select All

▼

All

Channel Type

Zoom

Select Option

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

BN68-01786A-Eng.indb 18 2008-08-29 오후 3:20:39

English - 19

Reserving a Program (Time Viewing)

If you reserve a program you want to watch, the channel is

automatically switched to the reserved channel in the Channel

List; even when you are watching another channel.

To reserve a program, set the current time rst. See pages 34.

Reserved channels can only be set if they are in the Channel

List (See page 20).

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

Press the ▲ or ▼ button to select Channel List, then

press the ENTER button.

2 Press the ▲ or ▼ button to select a channel, then press

the TOOLS button.

3 Press the ▲ or ▼ button to select Timer Viewing, then

press the ENTER button.

The Reserve a Program (Timer Viewing) screen appears.

4 Press the ▲/▼/◄/► buttons to reserve a program and

then press the ENTER button.

Reserving a program has been completed.

Press the EXIT button to exit.

➢

You can also reserve a program in the All Channels or

Favourite menus using the same procedures.

➢

For information on how to confirm a viewing

reservation, refer to page 20. Only memorized channels

can be reserved.

➢

You can set the channel, month, day, year, hour and

minute directly by pressing the number buttons on the

remote control.

Press the CH LIST button on the remote control to bring

up the channel lists.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button,

the Program Guide for the channel appears. You can reserve a

program according to the procedures described above.

: A program currently being broadcast.

: A reserved program.

Continued...

Added Channels

All

Zoom

Option

Watch

824 UKTV Gold

825 UKTV style

1 C --

2 C --

3 C --

4 C --

5 C --

6 C --

7 C --

8 C --

1/22/2008

12:47 am 2.0

3:54 am

6:44 am HD 1 100

7:49 am HD

8:59 am +

10:08 am

10:37 am

Channel

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Signal Information

LNA

: Off

Timer Viewing

Antenna Channel Repeat

ATV 1 Once

Date

01-01-2008

Start Time

10:09

Enter ReturnMove Adjust

Added Channels

All

Channel Type

Zoom

Select Option ► Next Program

824 UKTV Gold

825 UKTV style

1 C --

2 C --

3 C --

4 C --

5 C --

6 C --

7 C --

8 C --

Delete

Add to Favourite

Timer Viewing

Edit Channel Name

Sort

Select All

▼

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

BN68-01786A-Eng.indb 19 2008-08-29 오후 3:20:40

English - 20

Confirming a Viewing Reservation

You can view, modify or delete a reservation.

1 Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

Press the ▲ or ▼ button to select Channel List, then

press the ENTER button.

2 Press the ◄ button to select Added Channels.

3 Press the ▲ or ▼ button to select Programmed, then

press the ENTER button.

You can view the program reservations.

Modifying a viewing reservation

4 To select a reservation item to be modied, press the ▲ or

▼ button and then press the TOOLS button.

5 Press the ENTER button to select Change Info.

6 Press the ▲/▼/◄/► buttons to change a reservation

setting and then press the ENTER button.

The reservation modication is applied.

Canceling a reservation

4 To select a reservation item to be canceled, press the ▲ or

▼ button, and then press the TOOLS button.

5 Press the ▲ or ▼ button to select Cancel Schedules,

then press the ENTER button.

6 Press the ◄ or ► button to select OK, then press the

ENTER button.

The viewing reservation has been canceled.

Press the EXIT button to exit.

Programmed Menu

• Change Info: Select to change a viewing reservation.

• Cancel Schedules: Select to cancel a viewing reservation.

• Information: Select to view a viewing reservation.

• Select All/Deselect All: You can select(or Deselect) all channels in the channel list.

Press the CH LIST button on the remote control to

bring up the channel lists.

Continued...

Channel

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Channels

Child Lock : On

Fine Tune

Signal Information

LNA

: Off

824 UKTV Gold

825 UKTV style

1 C --

2 C --

3 C --

4 C --

5 C --

6 C --

7 C --

8 C --

Added Channels

All

Channel Type

Zoom

Select Option

2007/2/3

3:15 1 Air No Program Name

4:15 2 Air No Program Name

2007/2/4

2:14 3 Air No Program Name

2007/2/5

2:15 4 Air No Program Name

Programmed

All

Channel Type

Zoom

Select Option

Information

Programmed

2007/2/3

3:15 1 Air No Program Name

4:15 2 Air No Program Name

2007/2/4

2:14 3 Air No Program Name

2007/2/5

2:15 4 Air No Program Name

Change Info

Cancel Schedules

Information

Select All

All

Channel Type

Zoom

Select Option

Information

TV/DTV

-

/

--

P

GUIDE

TTX/MIX P.SIZE

SUBT.

MENU

BN59-00705A

BN68-01786A-Eng.indb 20 2008-08-29 오후 3:20:41

La page charge ...

Samsung PS42A426C1M Manuel utilisateur

Ce manuel convient également à

Samsung PS42A426C1M Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents