Essentiel b EDVI23 Manuel utilisateur

Marque: Essentiel b

Modèle: EDVI23

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Table induction

EDVI23

CONTENTS

Safety information 2

Safety instructions 4

Installation 6

Product description 9

Daily use 10

Hints and tips 13

Care and cleaning 15

Troubleshooting 15

Technical data 17

Energy efficiency 18

VISIT OUR WEBSITE TO:

Get usage advice, brochures, trouble shooter, service and repair information:

www.boulanger.com/info/assistance

Service Relation Clients

Avenue de la Motte

CS80137

59811 Lesquin

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damage that are the result of

incorrect installation or usage. Always keep the instructions

in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Children between 3 and 8 years of age and persons with

very extensive and complex disabilities shall be kept away

from the appliance unless continuously supervised.

• Children of less than 3 years of age should be kept away

from the appliance unless continuously supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

• WARNING: Keep children and pets away from the

appliance when it operates or when it cools down.

Accessible parts become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements.

• WARNING: Unattended cooking on a hob with fat or oil

can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• CAUTION: The appliance must not be supplied through an

external switching device, such as a timer, or connected to

a circuit that is regularly switched on and off by a utility.

• CAUTION: The cooking process has to be supervised. A

short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot.

• Do not use the appliance before installing it in the built-in

structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do

not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains. In

case the appliance is connected to the mains directly using

junction box, remove the fuse to disconnect the appliance

from power supply. In either case contact the Authorised

Service Centre.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

Installation

WARNING! Only a qualified

person must install this

appliance.

WARNING! Risk of injury or

damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from other

appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture from causing swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance next to a

door or under a window. This prevents

hot cookware from falling from the

appliance when the door or the window

is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer is sufficient for air

circulation.

• The bottom of the appliance can get

hot. Make sure to install a separation

panel made from plywood, kitchen

carcass material or other non-

flammable materials under the

appliance to prevent access to the

bottom.

• The separation panel has to cover the

area under the hob completely.

• Make sure that the ventilation space of

2 mm, between the worktop and the

front of the below unit, is free. The

warranty does not cover damages

caused by the lack of an adequate

ventilation space.

Electrical Connection

WARNING! Risk of fire and

electric shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation device

must have a contact opening width of

minimum 3 mm.

Use

WARNING! Risk of injury,

burns and electric shock.

• Remove all the packaging, labelling

and protective film (if applicable) before

first use.

• This appliance is for household use

only.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after each

use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it may

splash.

WARNING! Risk of fire and

explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or items

that are wet with flammable products

in, near or on the appliance.

WARNING! Risk of damage to

the appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the glass

surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron, aluminium

or with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you

have to move them on the cooking

surface.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

Care and cleaning

• Clean the appliance regularly to

prevent the deterioration of the surface

material.

• Switch off the appliance and let it cool

down before cleaning.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

Service

• To repair the appliance contact the

Authorised Service Centre. Use original

spare parts only.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational status

of the appliance. They are not intended

to be used in other applications and are

not suitable for household room

illumination.

Disposal

WARNING! Risk of injury or

suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable close

to the appliance and dispose of it.

INSTALLATION

WARNING! Refer to Safety

chapters.

Before the installation

Before you install the hob, write down the

information below from the rating plate.

The rating plate is on the bottom of the

hob.

Model .......................................

PNC .........................................

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in units

and work surfaces that align to the

standards.

Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable,

use the cable type: H05V2V2-F which

withstands a temperature of 90 °C or

higher. Speak to your local Service

Centre. The connection cable may only

be replaced by a qualified electrician.

Attaching the seal - On-top

installation

1. Clean the worktop around the cut out

area.

2. Attach the supplied 2x6mm seal stripe

to the lower edge of the hob, along the

outer edge of the glass ceramic. Do

not stretch it. Make sure that the ends

of the seal stripe are located in the

middle of one side of the hob.

3. Add some millimetres to the length

when you cut the seal stripe.

4. Join the two ends of the seal stripe

together.

Assembly

min.

50mm

min.

500mm

min.

2mm

min. 2 mm

12 mm

28 mm

38 mm

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

< 20 mm

> 20 mm

min. 2 mm

12 mm

28 mm

38 mm

57 mm

41 mm

31 mm

min. 500 mm

270

R 5mm

min.

55mm

490

min.

38 mm

min.

2 mm

min.

12 mm

min.

2 mm

Installation of more than one

hob

40-50 mm

50 mm

55 mm

30 mm

min. 500 mm

490 mm

270 mm

PRODUCT DESCRIPTION

Cooking surface layout

Induction cooking zone

Control panel

Control panel layout

1 2 3 4 5 6

79 810

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell

which functions operate.

Sen‐

sor

field

Function Comment

ON / OFF To activate and deactivate the hob.

Lock / Child Safety Device To lock / unlock the control panel.

Pause To activate and deactivate the function.

- Heat setting display To show the heat setting.

- Timer indicators of cooking

zones

To show for which zone you set the time.

- Timer display To show the time in minutes.

- To select the cooking zone.

Sen‐

sor

field

Function Comment

- To increase or decrease the time.

- To set a heat setting.

PowerBoost To activate the function.

Heat setting displays

Display Description

The cooking zone is deactivated.

The cooking zone operates.

Pause operates.

PowerBoost operates.

+ digit

There is a malfunction.

/ /

OptiHeat Control (3 step Residual heat indicator): continue cooking /

keep warm / residual heat.

Lock / Child Safety Device operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off operates.

OptiHeat Control (3 step

Residual heat indicator)

WARNING! / / There

is a risk of burns from residual

heat.

The indicators show the level of the

residual heat for the cooking zones you

are currently using. The indicators may

also come on for the neighbouring cooking

zones even if you are not using them.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware. The

glass ceramic is heated by the heat of the

cookware.

DAILY USE

WARNING! Refer to Safety

chapters.

Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the hob

again.

• you use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• you do not deactivate a cooking zone

or change the heat setting. After some

time

comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

Touch to increase the heat setting.

Touch to decrease the heat setting.

Touch and at the same time to

deactivate the cooking zone.

Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware automatically.

You can cook with the large cookware on

two cooking zones at the same time.

PowerBoost

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical data”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: touch or

Timer

• Count Down Timer

You can use this function to set the length

of a single cooking session.

First set the heat setting for the cooking

zone, then set the function.

To set the cooking zone: touch

repeatedly until the indicator of a cooking

zone appears.

To activate the function or change the

time: touch

or of the timer to set the

time (00 - 99 minutes). When the indicator

of the cooking zone starts to flash, the

time counts down.

To see the remaining time: touch to

set the cooking zone. The indicator of the

cooking zone starts to flash. The display

shows the remaining time.

To deactivate the function: touch to

set the cooking zone and then touch .

The remaining time counts down to 00.

The indicator of the cooking zone

disappears.

When the countdown ends, an

acoustic signal sounds and 00

flashes. The cooking zone

deactivates.

To stop the sound: touch .

• Minute Minder

You can use this function when the hob is

activated and the cooking zones do not

operate. The heat setting display shows

To activate the function: touch and

then touch or of the timer to set the

time. When the time finishes, an acoustic

signal sounds and 00 flashes.

To stop the sound: touch .

To deactivate the function: touch and

then touch

. The remaining time counts

down to 00.

The function has no effect on

the operation of the cooking

zones.

Pause

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, all other

symbols on the control panels are locked.

The function does not stop the timer

functions.

Touch

to activate the function.

comes on. The heat setting is lowered

to 1.

To deactivate the function, touch .

The previous heat setting comes on.

Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch .

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch .

The previous heat setting comes on.

When you deactivate the hob,

you also deactivate this

function.

Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the hob

with . Do not set any heat setting.

Touch

for 4 seconds. comes on.

Deactivate the hob with

To deactivate the function: activate the

hob with

. Do not set any heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with

To override the function for only one

cooking time: activate the hob with

comes on. Touch for 4 seconds. Set

the heat setting in 10 seconds. You can

operate the hob. When you deactivate the

hob with the function operates again.

OffSound Control (Deactivation

and activation of the sounds)

Deactivate the hob. Touch for 3

seconds. The display comes on and goes

out. Touch for 3 seconds. or

comes on. Touch of the front left zone

to choose one of the following:

• - the sounds are off

• - the sounds are on

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to you can

hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

Power management

If multiple zones are active and the

consumed power exceeds the limitation of

the power supply, this function divides the

available power between all cooking

zones. The hob controls heat settings to

protect the fuses of the house installation.

• If the hob reaches the limit of maximum

available power (refer to the rating

plate), the power of the cooking zones

will be automatically reduced.

• The heat setting of the cooking zone

selected last is always prioritised. The

remaining power will be divided

between the previously activated

cooking zones in reverse order of

selection.

• The heat setting display of the reduced

zones changes between the initially

selected heat setting and the reduced

heat setting.

• Wait until the display stops flashing or

reduce the heat setting of the cooking

zone selected last. The cooking zones

will continue operating with the reduced

heat setting. Change the heat settings

of the cooking zones manually, if

necessary.

HINTS AND TIPS

WARNING! Refer to Safety

chapters.

Cookware

For induction cooking zones a

strong electro-magnetic field

creates the heat in the

cookware very quickly.

Use the induction cooking zones with

suitable cookware.

• The bottom of the cookware must be as

thick and flat as possible.

• Ensure pan bases are clean and dry

before placing on the hob surface.

• In order to avoid scratches, do not slide

or rub the pot across the ceramic glass.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, multi-layer bottom

(with a correct marking from a

manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is suitable for an induction

hob if:

• water boils very quickly on a zone set

to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

Cookware dimensions

• Induction cooking zones adapt to the

dimension of the bottom of the

cookware automatically.

• The cooking zone efficiency is related

to the diameter of the cookware. The

cookware with a diameter smaller than

the minimum receives only a part of the

power generated by the cooking zone.

• For both safety reasons and optimal

cooking results, do not use cookware

larger than indicated in "Cooking zones

specification". Avoid keeping cookware

close to the control panel during the

cooking session. This might impact the

functioning of the control panel or

accidentally activate hob functions.

Refer to "Technical data".

The noises during operation

If you can hear:

• crack noise: cookware is made of

different materials (a sandwich

construction).

• whistle sound: you use a cooking zone

with a high power level and the

cookware is made of different materials

(a sandwich construction).

• humming: you use a high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not

indicate any malfunction.

Examples of cooking

applications

The correlation between the heat setting

of a zone and its consumption of power is

not linear. When you increase the heat

setting, it is not proportional to the

increase of the consumption of power. It

means that a cooking zone with the

medium heat setting uses less than a half

of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as

nec‐

essary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: but‐

ter, chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes, baked

eggs.

10 -

Cook with a lid on.

2 - 3 Simmer rice and milkbased

dishes, heat up ready-cooked

meals.

25 -

Add at least twice as much liq‐

uid as rice, mix milk dishes

halfway through the proce‐

dure.

3 - 4 Steam vegetables, fish, meat. 20 -

Add a couple of tablespoons

of liquid.

4 - 5 Steam potatoes. 20 -

Use max. ¼ l of water for 750

g of potatoes.

4 - 5 Cook larger quantities of food,

stews and soups.

60 -

150

Up to 3 l of liquid plus ingredi‐

ents.

6 - 7 Gentle fry: escalope, veal cor‐

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts.

nec‐

essary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

Heat setting Use to: Time

(min)

Hints

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

CARE AND CLEANING

WARNING! Refer to Safety

chapters.

General information

• Clean the hob after each use.

• Always use cookware with a clean

base.

• Scratches or dark stains on the surface

have no effect on how the hob

operates.

• Use a special cleaner suitable for the

surface of the hob.

• Use a special scraper for the glass.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

Use a special hob scraper on the glass

surface at an acute angle and move the

blade on the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and a

non-abrasive detergent. After cleaning,

wipe the hob dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a cloth.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or op‐

erate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

You do not set the heat set‐

ting for 10 seconds.

Activate the hob again and set

the heat setting in less than 10

seconds.

Problem Possible cause Remedy

You touched 2 or more sen‐

sor fields at the same time.

Touch only one sensor field.

Pause operates. Refer to "Daily use".

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva‐

ted.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Residual heat indicator

does not come on.

The zone is not hot because

it operated only for a short

time or the sensor is dam‐

aged.

If the zone operated sufficient‐

ly long to be hot, speak to an

Authorised Service Centre.

The heat setting changes

between two levels.

Power management oper‐

ates.

Refer to "Daily use".

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the rear

zones, if possible.

There is no sound when

you touch the panel sen‐

sor fields.

The sounds are deactivated. Activate the sounds. Refer to

"Daily use".

comes on.

Child Safety Device or Lock

operates.

Refer to "Daily use".

comes on.

There is no cookware on the

zone.

Put cookware on the zone.

The cookware does not cov‐

er the cross / square.

Cover the cross / square fully.

The cookware is unsuitable. Use suitable cookware. Refer

to "Hints and tips".

The diameter of the bottom

of the cookware is too small

for the zone.

Use cookware with correct di‐

mensions. Refer to "Technical

data".

Problem Possible cause Remedy

and a number come

on.

There is an error in the hob. Deactivate the hob and acti‐

vate it again after 30 seconds.

If comes on again, discon‐

nect the hob from the electrical

supply. After 30 seconds, con‐

nect the hob again. If the prob‐

lem continues, speak to an

Authorised Service Centre.

You can hear a constant

beep noise.

The electrical connection is

incorrect.

Disconnect the hob from the

electrical supply. Ask a quali‐

fied electrician to check the in‐

stallation.

If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre. Give the data

from the rating plate. Give also three digit

letter code for the glass ceramic (it is in

the corner of the glass surface) and an

error message that comes on. Make sure,

you operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about

the Service Centre and conditions of

guarantee are in the guarantee booklet.

TECHNICAL DATA

Cooking zones specification

Cooking zone Nominal pow‐

er (maximum

heat setting)

[W]

PowerBoost

[W]

PowerBoost

maximum du‐

ration [min]

Cookware di‐

ameter [mm]

Middle front 2300 3700 10 180 - 210

Middle rear 1400 2500 4 125 - 145

The power of the cooking zones can be

different in some small range from the

data in the table. It changes with the

material and dimensions of the cookware.

For optimal cooking results use cookware

no larger than the diameter in the table.

Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO.

03 IT

MADE IN ITALY

TYPE

IP20

0049

A B C

A. Stick it on Guarantee Card and send

this part (if applicable).

B. Stick it on Guarantee Card and keep

this part (if applicable).

C. Stick it on instruction booklet.

ENERGY EFFICIENCY

Product information*

Model identification EDVI23

Type of hob Built-In Hob

Number of cooking zones 2

Heating technology Induction

Diameter of circular cooking zones (Ø) Middle front

Middle rear

21.0 cm

14.5 cm

Energy consumption per cooking zone (EC

electric cooking)

Middle front

Middle rear

188.9 Wh / kg

180.8 Wh / kg

Energy consumption of the hob (EC electric hob) 184.9 Wh / kg

* For European Union according to EU 66/2014. For Belarus according to STB 2477-2017, An‐

nex A. For Ukraine according to 742/2019.

EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring

performance

Energy saving

You can save energy during everyday

cooking if you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on

the cookware.

• Before you activate the cooking zone

put the cookware on it.

• Put the smaller cookware on the

smaller cooking zones.

• Put the cookware directly in the centre

of the cooking zone.

• Use the residual heat to keep the food

warm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put

the packaging in relevant containers to

recycle it. Help protect the environment

and human health by recycling waste of

electrical and electronic appliances. Do

not dispose of appliances marked with the

symbol with the household waste.

Return the product to your local recycling

facility or contact your municipal office.

TABLE DES MATIÈRES

Informations de sécurité 20

Consignes de sécurité 22

Installation 25

Description de l'appareil 27

Utilisation quotidienne 29

Conseils 32

Entretien et Nettoyage 34

Dépannage 35

Caractéristiques techniques 37

Rendement énergétique 38

VISITEZ NOTRE SITE WEB POUR :

Obtenir des conseils d’utilisation, des brochures, un dépanneur, des informations sur

le service et les réparations :

www.boulanger.com/info/assistance

Service Relation Clients

Avenue de la Motte

CS80137

59811 Lesquin

Sous réserve de modifications.

INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

pourra être tenu pour responsable des blessures et dégâts

résultant d'une mauvaise installation ou utilisation.

Conservez toujours les instructions dans un lieu sûr et

accessible pour vous y référer ultérieurement.

Sécurité des enfants et des personnes vulnérables

• Cet appareil peut être utilisé par des enfants âgés d'au

moins 8 ans et par des personnes ayant des capacités

physiques, sensorielles ou mentales réduites ou dénuées

d’expérience ou de connaissance, s'ils sont correctement

surveillés ou si des instructions relatives à l'utilisation de

l'appareil en toute sécurité leur ont été données et s’ils

comprennent les risques encourus.

• Les enfants entre 3 et 8 ans et les personnes ayant un

handicap très important et complexe doivent être tenus à

l'écart de l'appareil, à moins d'être surveillés en

permanence.

• Les enfants de moins de 3 ans doivent être tenus à l'écart

de l'appareil, à moins d'être surveillés en permanence.

La page charge ...

Essentiel b EDVI23 Manuel utilisateur

Marque: Essentiel b

Modèle: EDVI23

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Essentiel b EDVI23 User manual

Essentiel b EDVI23 Manuel utilisateur

Essentiel b EDVI23 Manuel utilisateur

dans d''autres langues

Autres documents