LAMONA LAM1803 Manuel utilisateur

Marque: LAMONA

Modèle: LAM1803

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

www.howdens.com/appliance-registration

Hob

LAM1803

User Manual

Contents

Safety information 4

Safety instructions 6

Installation 8

Product description 10

Daily use 12

Hints and tips 14

Care and cleaning 16

Troubleshooting 16

Technical data 18

Energy efficiency 18

Your guarantee 19

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible

for any injuries or damage that are the result of incorrect

installation or usage. Always keep the instructions in a safe

and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Children between 3 and 8 years of age and persons with

very extensive and complex disabilities shall be kept away

from the appliance unless continuously supervised.

• Children of less than 3 years of age should be kept away

from the appliance unless continuously supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

• WARNING: Keep children and pets away from the appliance

when it operates or when it cools down. Accessible parts

become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

General Safety

• WARNING: The appliance and its accessible parts become

hot during use. Care should be taken to avoid touching

heating elements.

• WARNING: Unattended cooking on a hob with fat or oil can

be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• CAUTION: The appliance must not be supplied through an

external switching device, such as a timer, or connected to a

circuit that is regularly switched on and off by a utility.

• CAUTION: The cooking process has to be supervised. A

short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the cooking

surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot.

• Do not use the appliance before installing it in the built-in

structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do

not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked, switch

off the appliance and unplug it from the mains. In case the

appliance is connected to the mains directly using junction

box, remove the fuse to disconnect the appliance from power

supply. In either case contact the Authorised Service Centre.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

Safety instructions

Installation

WARNING! Only a qualified person must install this appliance.

WARNING! Risk of injury or damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with the appliance.

• Keep the minimum distance from other appliances and units.

• Always take care when moving the appliance as it is heavy. Always use safety gloves

and enclosed footwear.

• Seal the cut surfaces with a sealant to prevent moisture from causing swelling.

• Protect the bottom of the appliance from steam and moisture.

• Do not install the appliance next to a door or under a window. This prevents hot

cookware from falling from the appliance when the door or the window is opened.

• If the appliance is installed above drawers make sure that the space, between the

bottom of the appliance and the upper drawer is sufficient for air circulation.

• The bottom of the appliance can get hot. Make sure to install a separation panel made

from plywood, kitchen carcass material or other non-flammable materials under the

appliance to prevent access to the bottom.

• The separation panel has to cover the area under the hob completely.

• Make sure that the ventilation space of 2 mm, between the worktop and the front of the

below unit, is free. The warranty does not cover damages caused by the lack of an

adequate ventilation space.

Electrical Connection

WARNING! Risk of fire and electric shock.

• All electrical connections should be made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure that the appliance is disconnected from the

power supply.

• Make sure that the parameters on the rating plate are compatible with the electrical

ratings of the mains power supply.

• Make sure the appliance is installed correctly. Loose and incorrect electricity mains

cable or plug (if applicable) can make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or

hot cookware, when you connect the appliance to the near sockets.

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable.

Contact our Authorised Service Centre or an electrician to change a damaged mains

cable.

• The shock protection of live and insulated parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket only at the end of the installation. Make

sure that there is access to the mains plug after the installation.

• If the mains socket is loose, do not connect the mains plug.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips and contactors.

• The electrical installation must have an isolation device which lets you disconnect the

appliance from the mains at all poles. The isolation device must have a contact opening

width of minimum 3 mm.

Use

WARNING! Risk of injury, burns and electric shock.

• Remove all the packaging, labelling and protective film (if applicable) before first use.

• This appliance is for household use only.

• Do not change the specification of this appliance.

• Make sure that the ventilation openings are not blocked.

• Do not let the appliance stay unattended during operation.

• Set the cooking zone to “off” after each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the cooking zones. They can become hot.

• Do not operate the appliance with wet hands or when it has contact with water.

• Do not use the appliance as a work surface or as a storage surface.

• If the surface of the appliance is cracked, disconnect immediately the appliance from the

power supply. This to prevent an electrical shock.

• Users with a pacemaker must keep a distance of minimum 30 cm from the induction

cooking zones when the appliance is in operation.

• When you place food into hot oil, it may splash.

WARNING! Risk of fire and explosion

• Fats and oil when heated can release flammable vapours. Keep flames or heated

objects away from fats and oils when you cook with them.

• The vapours that very hot oil releases can cause spontaneous combustion.

• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil

used for the first time.

• Do not put flammable products or items that are wet with flammable products in, near or

on the appliance.

WARNING! Risk of damage to the appliance.

• Do not keep hot cookware on the control panel.

• Do not put a hot pan cover on the glass surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware fall on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with empty cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches

on the glass / glass ceramic. Always lift these objects up when you have to move them

on the cooking surface.

• This appliance is for cooking purposes only. It must not be used for other purposes, for

example room heating.

Care and cleaning

• Clean the appliance regularly to prevent the deterioration of the surface material.

• Switch off the appliance and let it cool down before cleaning.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use

abrasive products, abrasive cleaning pads, solvents or metal objects.

Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts

only.

• Concerning the lamp(s) inside this product and spare part lamps sold separately: These

lamps are intended to withstand extreme physical conditions in household appliances,

such as temperature, vibration, humidity, or are intended to signal information about the

operational status of the appliance. They are not intended to be used in other

applications and are not suitable for household room illumination.

Disposal

WARNING! Risk of injury or suffocation.

• Contact your municipal authority for information on how to discard the appliance

correctly.

• Disconnect the appliance from the mains supply.

• Cut off the mains electrical cable close to the appliance and dispose of it.

Installation

WARNING! Refer to Safety chapters.

Before the installation

Before you install the hob, write down the information below from the rating plate. The

rating plate is on the bottom of the hob.

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you assemble the hob into correct built-in units and work

surfaces that align to the standards.

Connection cable

• The hob is supplied with a connection cable.

• To replace the damaged mains cable, use the cable H03BB-F, H03V2V2-F or

H05V2V2-F for single phase connection or H05BB-F or H05V2V2-F for a two phase

connection. Speak to your local Service Centre. The connection cable may only be

replaced by a qualified electrician.

Connection diagram

220V-240V

N N

220V-240V

L L

220V-240V 1N

220V-240V

N PE

400V 2N

220V-240V

Insert the shunts between the screws as shown.

Assembly

If you install the hob under a hood, please see the installation instructions of the hood for

the minimum distance between the appliances.

min.

50mm

min.

500mm

If the appliance is installed above a drawer, the hob ventilation can warm up the items

stored in the drawer during the cooking process.

Product description

Cooking surface layout

1 1

Induction cooking zone

Control panel

Control panel layout

1 32 4 5

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell

which functions operate.

Sen-

sor

field

Function Comment

ON / OFF To activate and deactivate the hob.

Lock / Child Safety Device To lock / unlock the control panel.

- To select the cooking zone.

- Heat setting display To show the heat setting.

- To set a heat setting.

Heat setting displays

Display Description

The cooking zone is deactivated.

The cooking zone operates.

PowerBoost operates.

+ digit

There is a malfunction.

A cooking zone is still hot (residual heat).

Lock / Child Safety Device operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off operates.

Residual heat indicator

WARNING! As long as the indicator is on, there is a risk of burns from

residual heat.

The induction cooking zones produce the heat necessary for the cooking process directly

in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.

The indicator appears when a cooking zone is hot.

The indicator may also appear:

• for the neighbouring cooking zones even if you are not using them,

• when hot cookware is placed on cold cooking zone,

• when the hob is deactivated but the cooking zone is still hot.

The indicator disappears when the cooking zone has cooled down.

Daily use

WARNING! Refer to Safety chapters.

Activating and deactivating

Touch for 1 second to activate or deactivate the hob.

Automatic Switch Off

The function deactivates the hob automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate the hob,

• you spill something or put something on the control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the

object or clean the control panel.

• the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or change the heat setting. After some time

comes on and the hob deactivates.

The relation between the heat setting and the time after which the hob deactivates:

Heat setting The hob deactivates after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

Selecting the cooking zone

To select a cooking zone touch the sensor field / corresponding to this zone. The

display shows the heat setting (

The heat setting

Set the cooking zone.

Touch to increase the heat setting. Touch to decrease the heat setting. Touch and

at the same time to deactivate the cooking zone.

PowerBoost

This function makes more power available to the induction cooking zones. The function

can be activated for the induction cooking zone only for a limited period of time. After this

time the induction cooking zone automatically sets back to the highest heat setting.

The function is available for the left front and the right front cooking zones only.

Refer to “Technical data” chapter.

To activate the function for a cooking zone: first set the cooking zone and then set the

maximum heat setting. Touch

until comes on.

To deactivate the function: touch .

Lock

You can lock the control panel while cooking zones operate. It prevents an accidental

change of the heat setting.

Set the heat setting first.

To activate the function: touch . comes on for 4 seconds.

To deactivate the function: touch . The previous heat setting comes on.

When you deactivate the hob, you also deactivate this function.

Child Safety Device

This function prevents an accidental operation of the hob.

To activate the function: activate the hob with . Do not set any heat setting. Touch

for 4 seconds. comes on. Deactivate the hob with .

To deactivate the function: activate the hob with . Do not set any heat setting. Touch

for 4 seconds. comes on. Deactivate the hob with .

To override the function for only one cooking time: activate the hob with . comes

on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the

hob. When you deactivate the hob with

the function operates again.

Power management

If multiple zones are active and the consumed power exceeds the limitation of the power

supply, this function divides the available power between all cooking zones. The hob

controls heat settings to protect the fuses of the house installation.

• Cooking zones are grouped according to the location and number of the phases in the

hob. Each phase has a maximum electricity loading (3300 W). If the hob reaches the

limit of maximum available power within one phase, the power of the cooking zones will

be automatically reduced.

• The heat setting of the cooking zone selected last is always prioritised. The remaining

power will be divided between the previously activated cooking zones in reverse order

of selection.

• The heat setting display of the reduced zones changes between the initially selected

heat setting and the reduced heat setting.

• Wait until the display stops flashing or reduce the heat setting of the cooking zone

selected last. The cooking zones will continue operating with the reduced heat setting.

Change the heat settings of the cooking zones manually, if necessary.

Refer to the illustration for possible combinations in which power can be distributed among

the cooking zones.

Hints and tips

WARNING! Refer to Safety chapters.

Cookware

For induction cooking zones a strong electro-magnetic field creates the heat in

the cookware very quickly.

Use the induction cooking zones with suitable cookware.

• The bottom of the cookware must be as thick and flat as possible.

• Ensure pan bases are clean and dry before placing on the hob surface.

• In order to avoid scratches, do not slide or rub the pot across the ceramic glass.

Cookware material

• correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a

correct marking from a manufacturer).

• not correct: aluminium, copper, brass, glass, ceramic, porcelain.

Cookware is suitable for an induction hob if:

• water boils very quickly on a zone set to the highest heat setting.

• a magnet pulls on to the bottom of the cookware.

Cookware dimensions

• Induction cooking zones adapt to the dimension of the bottom of the cookware

automatically.

• The cooking zone efficiency is related to the diameter of the cookware. The cookware

with a diameter smaller than the minimum receives only a part of the power generated

by the cooking zone.

• For both safety reasons and optimal cooking results, do not use cookware larger than

indicated in "Cooking zones specification". Avoid keeping cookware close to the control

panel during the cooking session. This might impact the functioning of the control panel

or accidentally activate hob functions.

Refer to "Technical data".

The noises during operation

If you can hear:

• crack noise: cookware is made of different materials (a sandwich construction).

• whistle sound: you use a cooking zone with a high power level and the cookware is

made of different materials (a sandwich construction).

• humming: you use a high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not indicate any malfunction.

Examples of cooking applications

The correlation between the heat setting of a zone and its consumption of power is not

linear. When you increase the heat setting, it is not proportional to the increase of the

consumption of power. It means that a cooking zone with the medium heat setting uses

less than a half of its power.

The data in the table is for guidance only.

Heat setting Use to: Time

(min)

Hints

1 Keep cooked food warm. as

neces-

sary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: butter,

chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes, baked

eggs.

10 - 40 Cook with a lid on.

2 - 3 Simmer rice and milkbased

dishes, heat up ready-cooked

meals.

25 - 50 Add at least twice as much liq-

uid as rice, mix milk dishes

halfway through the procedure.

3 - 4 Steam vegetables, fish, meat. 20 - 45 Add a couple of tablespoons of

liquid.

4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g

of potatoes.

4 - 5 Cook larger quantities of food,

stews and soups.

60 -

150

Up to 3 l of liquid plus ingredi-

ents.

6 - 7 Gentle fry: escalope, veal cor-

don bleu, cutlets, rissoles, saus-

ages, liver, roux, eggs, pan-

cakes, doughnuts.

neces-

sary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Heat setting Use to: Time

(min)

Hints

Boil large quantities of water. PowerBoost is activated.

Care and cleaning

WARNING! Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with a clean base.

• Scratches or dark stains on the surface have no effect on how the hob operates.

• Use a special cleaner suitable for the surface of the hob.

• Use a special scraper for the glass.

Cleaning the hob

• Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise,

the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob

scraper on the glass surface at an acute angle and move the blade on the surface.

• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive

detergent. After cleaning, wipe the hob dry with a soft cloth.

• Remove shiny metallic discoloration: use a solution of water with vinegar and clean

the glass surface with a cloth.

Troubleshooting

WARNING! Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or op-

erate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical sup-

ply.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

Problem Possible cause Remedy

You do not set the heat set-

ting for 10 seconds.

Activate the hob again and set

the heat setting in less than 10

seconds.

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

There is water or fat stains on

the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva-

ted.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Residual heat indicator

does not come on.

The zone is not hot because it

operated only for a short time

or the sensor is damaged.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

The heat setting changes

between two levels.

Power management oper-

ates.

Refer to "Daily use".

The sensor fields become

hot.

The cookware is too large or

you put it too near to the con-

trols.

Put large cookware on the rear

zones, if possible.

comes on.

Child Safety Device or Lock

operates.

Refer to "Daily use".

comes on.

There is no cookware on the

zone.

Put cookware on the zone.

The cookware is unsuitable. Use suitable cookware. Refer to

"Hints and tips".

The diameter of the bottom of

the cookware is too small for

the zone.

Use cookware with correct di-

mensions. Refer to "Technical

data".

and a number come on.

There is an error in the hob. Deactivate the hob and activate

it again after 30 seconds. If

comes on again, disconnect the

hob from the electrical supply.

After 30 seconds, connect the

hob again. If the problem con-

tinues, speak to an Authorised

Service Centre.

Problem Possible cause Remedy

You can hear a constant

beep noise.

The electrical connection is

incorrect.

Disconnect the hob from the

electrical supply. Ask a qualified

electrician to check the installa-

tion.

If you cannot find a solution...

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised

Service Centre. Give the data from the rating plate. Give also three digit letter code for the

glass ceramic (it is in the corner of the glass surface) and an error message that comes on.

Make sure, you operated the hob correctly.

Technical data

Rating plate

Model LAM1803 PNC 949 492 468 00

Typ 63 B4A 00 AA 220 - 240 V / 400 V 2N 50 - 60 Hz

Induction 6.6 kW Made in Romania

Ser.Nr. ................. 6.6 kW

LAMONA

Cooking zones specification

Cooking zone Nominal pow-

er (maximum

heat setting)

[W]

PowerBoost

[W]

PowerBoost

maximum du-

ration [min]

Cookware di-

ameter [mm]

Left front 2300 2800 10 180 - 210

Left rear 1200 - - 125 - 145

Right front 1200 1800 4 125 - 145

Right rear 1800 - - 145 - 180

The power of the cooking zones can be different in some small range from the data in the

table. It changes with the material and dimensions of the cookware.

For optimal cooking results use cookware no larger than the diameter in the table.

Energy efficiency

Product information*

Model identification LAM1803

Type of hob Built-In Hob

Number of cooking zones 4

Heating technology Induction

Diameter of circular cooking zones (Ø) Left front

Left rear

Right front

Right rear

21.0 cm

14.5 cm

18.0 cm

Energy consumption per cooking zone (EC

electric cooking)

Left front

Left rear

Right front

Right rear

190.1 Wh / kg

181.0 Wh / kg

180.1 Wh / kg

183.8 Wh / kg

Energy consumption of the hob (EC electric hob) 183.8 Wh / kg

* For European Union according to EU 66/2014. For Belarus according to STB 2477-2017, Annex

A. For Ukraine according to 742/2019.

EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring per-

formance

Energy saving

You can save energy during everyday cooking if you follow below hints.

• When you heat up water, use only the amount you need.

• If it is possible, always put the lids on the cookware.

• Before you activate the cooking zone put the cookware on it.

• Put the smaller cookware on the smaller cooking zones.

• Put the cookware directly in the centre of the cooking zone.

• Use the residual heat to keep the food warm or to melt it.

Your guarantee

Product Guarantee Details (UK only)

Your appliance has the benefit of a comprehensive manufacturer’s guarantee which

covers the cost of breakdown repairs. (Details of which are shown on your Proof of

Purchase Document).

• Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE

PROOF OF PURCHASE)

• The product must be correctly installed and operated in accordance with the

manufacturer’s instructions and used for normal domestic purposes.

• This guarantee does not cover accidental damage, misuse or alternations which are

likely to affect the product.

• The guarantee is invalid if the product is tampered with, or repaired by any unauthorised

person.

(The guarantee in no way affects your statutory or legal rights)

What to do if you need to report a problem-

Please ensure you have ready:

• The product’s model & serial numbers

• Howdens Proof of Purchase document

• Your full contact details

Call the Service Line on 0344 460 0006

Environmental concerns

Recycle materials with the symbol . Put the packaging in relevant containers to recycle

it. Help protect the environment and human health by recycling waste of electrical and

electronic appliances. Do not dispose of appliances marked with the symbol with the

household waste. Return the product to your local recycling facility or contact your

municipal office.

La page charge ...

LAMONA LAM1803 Manuel utilisateur

Marque: LAMONA

Modèle: LAM1803

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: LAMONA LAM1803 User manual

LAMONA LAM1803 Manuel utilisateur

LAMONA LAM1803 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents