Dorel Home 4656449A Assembly Manual

Questions, concerns, missing parts?

CONTACT OUR CUSTOMER SERVICE DEPARTMENT

BEFORE RETURNING PRODUCT TO THE RETAILER.

4656449 (Textured Gray Canvas)

4659349 (Textured Ivory Canvas)

B34465644900-KT

Date of Purchase

Upholstered Bed

KT - 2023/7/12

If parts are missing or damaged, we will gladly ship your

replacement parts free of charge.

Lot Number (TAKEN FROM CARTON)

Thank you for purchasing from DHP!

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY

INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

1

King

Visit www.dhpfurniture.com/eng/replacement-parts

or call Toll-Free 1-800-267-1739

You can also chat with us at www.dhpfurniture.com

Weight Limit:1000Lb/454Kg

2

1-800-267-1739

DHP Consumer Services

12345 Albert Hudon, Suite 100,

Montreal, Quebec H1G 3L1

cs@dhpfurniture.com

 Work in a spacious area and near where the unit will be used, preferably on a

carpet, or use a piece of the cardboard packaging to protect your floor and product.

 Make sure all parts are included. Most parts are labeled or stamped on the raw

edge.

 Read each step carefully. It is very important that each step of the instructions is

performed in the correct order. If these steps are not followed in sequence,

assembly difficulties will occur.

 This product may contain small components. Please ensure that they are kept

away from small children.

 This product is designed for home use and is not intended for commercial use.

For help with assembly, identifying parts, product information or to order parts,

please contact us:

Limited 1 year Warranty

DHP warrants this product to be free from defects in material and workmanship

and agrees to remedy any such defect. This warranty covers one year from the

date of original purchase from authorized retailers. This is solely limited to the

repair or replacement of defective parts and assembly labor is not included.

This warranty does not apply to any product which has been improperly

assembled, subjected to misuse or abuse or which has been altered or repaired in

any way.The warranty does not cover wearing, tearing, fading or splitting of the

fabric (where applicable). Liability for consequential damages is excluded to the

extent exclusion is permitted by law. This warranty gives you specific legal rights

and you may also have other rights which vary from state to state or province to

province.

To obtain warranty service, purchaser must present original bill of sale.

Components repaired or replaced are warranted through the remainder of the

original warranty period only. The defective components will be repaired or

replaced without charge, subject to the terms and conditions described above.

The terms and conditions of the limited warranty are subject to change without

notice. For the latest warranty policy, please visit www.dhpfurniture.com.

Contact Us!

Read Before Beginning Assembly

1.5 hours

Do NOT use

powertools

This product is shipped in 2 cartons

Chat

with us! www.dhpfurniture.com

The hardware pack has been placed inside carton #1

Box 2 of 2Box 1 of 2

SCAN me

& I'll guide you to

DHP Helpcenter!

3

PARTS

A

N

A1

A2

B

D

C

F

L

S

TZ

P6

Z1

E

J

K

4

Each part has a unique part number.

Please reference the appropriate part

number when contacting customer

service for replacement parts.

Before throwing any packaging, please

verify all contents and make sure you

have received all the parts listed above!

PARTS LIST - BOX 1/2

A

Headboard

1 PC

PART NUMBERS

PART

LABELS

4656449

(Textured Gray

Canvas)

4659349

(Textured Ivory

Canvas)

PART

LABELS

4656449

(Textured Gray

Canvas)

4659349

(Textured

Ivory Canvas)

A T1029910 T1029980 L T1030980 T1030980

A1 T1029920 T1029990 K T957500 T957500

A2 T1029930 T1030000 JT1030990 T1030990

N T1029940 T1030010 P6 T1031000 T1031000

E T1024670 T1024670 S T393080 T393080

A1NE

LK

Side Board

1 PC

Side Board

1 PC Back Cover

1 PC

Side Rail

2 PCS

End Rail

1 PC

Cross Brace

1 PC

Support Leg

4 PCS

Wooden Slats

1 PC Bracket

1 PC

A2

JP6S

5

Each part has a unique part number.

Please reference the appropriate part

number when contacting customer

service for replacement parts.

Before throwing any packaging, please

verify all contents and make sure you

have received all the parts listed above!

PARTS LIST - BOX 1/2

Bracket

1 PC

Foot

2 PCS Leg

2 PCS

TZ1Z

PART NUMBERS

PART

LABELS

4656449

(Textured Gray

Canvas)

4659349

(Textured Ivory

Canvas)

T T393090 T393090

Z1 T1027300 T1027300

Z T1031130 T1031130

6

Each part has a unique part number.

Please reference the appropriate part

number when contacting customer

service for replacement parts.

Before throwing any packaging, please

verify all contents and make sure you

have received all the parts listed above!

PARTS LIST - BOX 2/2

PART NUMBERS

PART

LABELS

4656449

(Textured Gray

Canvas)

4659349

(Textured Ivory

Canvas)

B T1029950 T1030020

C T1029960 T1030030

D T1029970 T1030040

F T1030970 T1030970

Footboard

1 PC Side Panel

1 PC

BD

Side Panel

1 PC

Center Rail

2 PCS

CF

7

Please do not completely tighten all the hardware,

until the entire assembly is complete, unless

otherwise indicated in the step-by-step instructions.

The screw(s), bolt(s) to be used at each step are

shown in actual size in the lower right corner of the

page.

HARDWARE LIST

Hardware Pack

HP#:T4656449-00

4656449 (Textured Gray Canvas)

4659349 (Textured Ivory Canvas)

53

2

1

Bolt

32 PCS

4mm

Allen Key

1 PC

Bolt

26 PCS

4

1/4" X 3/4" 1/4" X 1 9/16" 1/4"

Metal Washer

14 PCS Spring Washer

6 PCS

1/4"

8

Step 1

Attach Z1 x 2 to A1 and A2 with .

Fully tighten all the bolts in this step.

X 2

Do not completely tighten the

bolts,leave half of the thread exposed.

Z1

1

A1

A2

1

9

Step 2

X 8

Attach A1 and A2 to A with  and .

A

A1

A2

A

A1

2

3

X 8

3

2

10

Step 3

AN

Stick N to the back of A with Velcro as

illustrated.

11

Step 4

Attach Z x 2 to B.

Screw  into B as illustrated, making sure

to leave half of the threads exposed.

X 4

B

BZ

Z

1

Do not completely tighten the BOLTS ,

leave half of the thread exposed.

1

12

Step 5

X 6

Attach T to D with .

Attach S to C with .

1

C

D

C

D

S

T

1

13

Step 6

Hang C and D on B as illustrated.

Don't completely tighten the bolts until

STEP 11 is complete.This will help with

alignment.

C

D

B

C

B

S

14

Step 7

Attach L and D to A1 with  &  & .

Attach L and C to A2 with  &  & .

X 6

D

C

A2

A1

L

2

3

4

C

A2

2

X 6

4

3

Slot should be facing

inside of the bed.

15

Step 8

X 8

Attach J x 2 to F with .

F

J

1

x 2

16

Step 9

Attach F x 2 and J x 2 to L and B with .

X 8

1

L

F

B

F

B

F

L

1

17

Step 10

Attach E x 2 to C/D with .

X 12

C

D

C

E

2

Velcro towards the top!

E

18

Step 11

E

K

F

E

Attach K to E x 2 and F x 2 with .

Fully tighten all bolts.

1

X 4

19

Step 12

12.1 Attach one end of P6 to L by inserting

the tab into the slot and turn it to the level

position.

12.2 Spread the slats P6 along the bed

with equal spacing, engage the velcro at

the end of slat with the counter part on E.

12.1

12.2

P6P6P6

P6

L

E

LLL

L

P6

20

Step 13

Attach the other end of P6 to B by inserting

the tab into the slot and turn it to the level

position.

B

BBB

P6

La page charge ...

Dorel Home 4656449A Assembly Manual

Dorel Home 4656449A Assembly Manual

dans d''autres langues

Documents connexes

Autres documents