LG TONE-FP3W Manuel utilisateur

TONE-FP3 / TONE-FP3W

OWNER’S MANUAL

Bluetooth® LG Stereo Headset

English

Čeština

Français

Deutsch Slovensky Shqip

Español Slovenščina

Magyar Hrvatski Bosanski

Italiano Srpski

Nederlands БЪЛГАРСКИ

Polski МАКЕДОНСКИ

Google Play App Store

Rev 4.0 EUF

www.lg.com

LG Electronics Inc. Single point of contact (EU/UK) :

Krijgsman 1, 1186 DM Amstelveen, The Netherlands

Using LG TONE Free™

Použití LG TONE Free™

Utilisation du LG TONE Free™

LG TONE Free™ verwenden

Az LG TONE Free™ használata

Utilizzo di LG TONE Free™

LG TONE Free™ gebruiken

Używanie LG TONE Free™

Uso de LG TONE Free™

Používanie slúchadiel LG TONE Free™

Uporaba LG TONE Free™

Upotreba LG TONE Free™

Използване на LG TONE Free™

Користење на LG TONE Free™

Uporaba LG TONE Free™

Si të përdorni kufjet LG TONE Free™

Upotreba LG TONE Free™

ENGLISH

Using LG TONE Free™

1

NOTE: For the best performance and to prevent any damage to, or

misuse of the headset, please read all of the information carefully prior

to using the headset.

Any modications or changes to this manual due to typographical errors

or inaccuracies of stated information shall only be made by

LG Electronics Inc.

The LG TONE Free (TONE-FP3) is a lightweight wireless headset that uses

Bluetooth technology.

This product can be used as an audio accessory for devices supporting

either the A2DP or Hands-Free Bluetooth Prole.

Safety Precautions

The following safety precautions are provided to prevent any unexpected

accident or damage. Please familiarise yourself with the safety

precautions.

The safety precautions are classied into “WARNING” and “CAUTION”.

!

WARNING: Failing to comply with the instructions may result in

serious injury or death.

!

CAUTION: Failing to comply with the instructions may result in minor

injury or product damage.

2

!

WARNING

Do not drop the product from a high place.

Make sure there is no water, alcohol, or benzene in contact with the

product.

Do not store the product in a wet or dusty place.

Do not place heavy objects on the product.

This product is waterproof to the IPX4 level (daily life waterproof).

(The IPX4 waterproof rating applies to the earbud product only.)

Do not put the product under the water or use it in a humid location

such as a bathroom.

! CAUTION

Do not disassemble, adjust, or repair the product arbitrarily.

Do not place the product near excessive heat or ammable material.

The product may be damaged if an incompatible charger is used.

Make sure that an infant or child does not swallow a magnet or a small

component of the product.

Make sure that foreign objects do not enter the charger’s connectors

(charging port and power plug). Failure to do so may result in re or

electric shock.

If you have a medical device implanted, contact your doctor before

using this device.

3

This product has a built-in battery, and the battery cannot be removed

or replaced arbitrarily.

For your safety, do not remove the battery incorporated in the product.

If you arbitrarily replace the battery or don’t replace it correctly, it may

explode.

The lithium-ion battery is a hazardous component that can cause injury.

Battery replacement by an unqualied professional can cause damage

to your device.

Do not replace the battery by yourself. The battery can be damaged,

which can cause overheat and injury. The battery must be replaced by

authorised service provider. The battery should be recycled or disposed

separately from household wastes.

Do not discard the battery arbitrarily. Follow the local procedure for

discarding batteries.

In order to prevent unnecessary energy consumption, disconnect the

device when fully charged. Always use an easily accessible power outlet

for charging your device.

Risk of re or explosion if the battery is replaced by an incorrect type.

Do not store or transport at pressures lower than 11.6 kPa and at

above 15000 m altitude.

Replacement of a battery with an incorrect type that can defeat a

safeguard (for example, in the case of some lithium battery types).

Disposal of a battery into re or a hot oven, or mechanically crushing or

cutting of a battery, that can result in an explosion.

Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of ammable

liquid or gas.

4

A battery subjected to extremely low air pressure that may result in an

explosion or the leakage of ammable liquid or gas.

Do not carelessly throw away old batteries. It can cause an explosion or

re. The disposal method may vary by country and region. Dispose of it

in an appropriate manner.

NOTE

If the product is exposed to excessive sweat, clean the product.

Keep the earbuds clean.

Wearing earbuds for a long time may cause pain, and if humidity inside

ears continues for a long time, it may cause skin trouble.

HD Speaker

If the communication network of the device you are connecting to

supports HD Voice Calling, you can enjoy making voice calls and

listening to music in high denition.

5

Product Components

LG TONE Free™

Earbuds (medium eargels

installed)

Charging Case

Extra Ear Gels

(small & large) Reference guide

Simple Owner's Manual WEEE Card

(Europe Only)

NOTE: Actual product design may differ from images shown in manual.

Make sure authentic LG Electronics components are used. Using a

non-authentic component may damage the product and thus void the

warranty.

!

CAUTION

6

Overview

Charging Case

Earbuds

*Make sure that the charging terminal is not soiled with foreign substance.

Charging case

charging port

Earbud charging

terminals

Battery status indicator

Microphone

Touchpad

Charging terminalsCharging terminals

Speaker meshSpeaker mesh

7

*The appearance and specications of the actual product may differ

depending on the model.

Pairing and Connecting

Fast Pair

-(

#MVFUPPUI 0/

~1m

1 Turn on the Bluetooth function on the mobile phone or the device to

be connected.

2 Open the cover of the charging case with the earbuds mounted on the

case. Press and hold the touchpad of the left or right earbud for 3 to 5

seconds until the battery status indicator blinks in blue.

3 When a Fast Pair pop-up appears on the bottom of the smartphone

screen, touch “Connect” to establish connection. (It only supports

Android™ 6.0 or higher, and requires conguring Bluetooth and

location information settings of the mobile device.)

8

4 If the pop-up does not appear, select [LG-TONE-FP3] from the

Bluetooth menu on the mobile phone and connect it (for users of iOS

or Android 5.0 or lower versions).

-(

-(50/&'1

#MVFUPPUI

!

CAUTION: In the list of Bluetooth connected devices,

LG-TONE-FP3_LE is not the correct model name for connection.

Check the model name in use and connect with the model name

without “LE”.

If the earbud model name is abnormally displayed on the Android

device, change the model name in the Bluetooth menu of

Connected Device Settings.

NOTE: To connect with another device, perform the above procedure again.

Automatic Reconnection

The earbuds are connected automatically when you open the cover of

the charging case. If you close the cover of the charging case with both

earbuds mounted in the charging case, the earbuds are disconnected.

9

Wearing Earbuds

1 Separate the earbuds from the charging case and adjust them so that

they t comfortably in your ears.

NOTE: You can easily separate the earbuds from the

charging case by turning the part with dotted line

in the image below to left or right and lifting the

earbuds.

2 When you wear the earbuds, you will hear a wearing detection alarm.

10

Playing Music

-(

Function Description

Play / Pause : Touch the left or right earbud once.

Adjusting

the Volume : Touch the left(Decrease volume) or

right(Increase volume) earbud twice.

Play Next : Touch the left or right earbud three times.

NOTE: You can change the operation method of the function in the

touchpad settings of the LG TONE Free app.

11

Mobile Calling Functions

Function Status Description

Answering

Calls Ringing Touch the left or right earbud once.

Ending Calls Talking Touch the left or right earbud twice.

Making Calls Idle If you make a call using a mobile phone,

the call is automatically connected to the

headset.

Receiving

Calls while

on the

Phone

Talking

If you touch the left or right earbud once,

the current call will go on hold, and you will

be able to answer an incoming call.

If the previous call is on hold, you can nish

the current call on the mobile phone.

(It works differently depending on the

mobile phone settings.)

Rejecting

Calls Ringing Touch and hold the left or right earbud.

12

Listen to the Ambient Sound (LAS)

The Listen to the Ambient Sound (LAS) function allows you to listen to

the ambient sound so that you can recognize the surrounding situation

and any potential risks.

Touch and hold the left or right earbud to turn on or off the Listen to

the Ambient Sound (LAS).

In the LG TONE Free app, you can choose Listen to the Ambient Sound

(LAS).

You can congure the Listen to the Ambient Sound mode and

Conversation mode using the LG TONE Free app.

Using the LAS results in reduced usable time compared to when it is off.

The LAS operates while the phone is in the standby mode or music play

mode.

!

CAUTION: When the LAS mode is enabled, you may hear the ambient

sound become loud suddenly.

13

Charging

Wired Charging

When the charging cable is connected, the charging status is displayed in

the charging case.

NOTE: The earbuds and the charging case are charged at the same time.

The charging port on the charging case cannot be used to supply

power to mobile phones, etc.

Purchase a charging cable separately.

14

Checking the Battery Status

If earbuds are mounted in the charging case, the earbuds’ battery status is

displayed. Otherwise, the charging case’s battery status is displayed.

Battery

Status

Indicator

Remaining

Battery (charger

not connected)

Charging

State (charger

connected)

Red 20% or lower Charging

Yellow 20% - 80% -

Green 80% or higher Fully charged

NOTE: When the charging case lid is closed,

charging case battery status is displayed. If

the charging case has no remaining charge,

there will be no display and it cannot function.

We recommend you keep the charging

case charged at all times as the earbuds

are not able to be turned on and turned off

independently.

15

Battery Status Indicator

Status Description

Bluetooth Search

Mode The battery status indicator ashes in blue.

Battery below 20% The battery status indicator turns on and

off in red.

Battery 20% - 80% The battery status indicator turns on and off

in yellow.

Battery 80% or

more The battery status indicator turns on and off

in green.

When there is

a problem while

charging The battery status indicator ashes in red.

Charging

(charger connected) The battery status indicator turns on in red.

Charging complete

(charger connected) The battery status indicator turns on in green.

16

Out of Range

If the device connected to the product is out of effective communication

range, the communication signal becomes weak and the communication is

lost. The effective communication range may vary depending on surrounding

and other conditions.

If the device comes back within effective communication range, the product

automatically reconnects to the device. If the device is not automatically

reconnected, touch the left or right earbud once to connect them.

LG TONE Free App

If you install the “LG TONE Free” app, you can use Check Earbud Battery,

Voice Alert, Change Equalizer Mode, Check Last Connected Location

Information, and Find My Earbuds functions. Check out the app for more

details.

To install the “LG TONE Free” app, search LG TONE Free in the Google Play

Store or App Store or scan the QR code below.

It supports Android 7.0 or higher and iOS 11 or higher.

Google Play App Store

17

Troubleshooting

If you see any of the following symptoms while using the product, make

sure to recheck it. It may not be a malfunction.

Symptom Cause and Solution

The power does not

turn on Check the battery level and charge it.

If unable to make a

call with earbuds

If the mobile phone does not support headset

and hands-free functions, you cannot use the

calling features.

Check the battery level and charge it.

If unable to register

earbuds to mobile

phone

Check whether earbuds are turned on.

Check if the earbuds have entered the search

mode.

- While the earbuds are inserted in the charging

case, press and hold the touch pad on the left

or right earbud for 3 to 5 seconds to switch to

the search mode.

If you replaced the

earbuds or there is

a problem with the

operation

(Factory reset)

While the earbuds are inserted in the charging

case, press and hold the touch pad on the left or

right earbud for 10 seconds or more.

- The battery status indicator of the charging

case ashes red and the initialization to the

factory status is carried out. After initialization

to the factory status, reconnect the earbuds.

18

Cleaning Guide

Cleaning Earbud

Clean the speaker hole and air ventilation hole regularly so that they are

not blocked by foreign substances (sebum, earwax, etc.).

* If the speaker hole and air ventilation hole are blocked, volume may be

low and noise may occur, and the noise canceling performance may be

lowered.

1 First, separate the ear tip and remove foreign substances inside the ear tip.

2 Then, clean the hole with a soft brush or cotton swab to clean it.

Speaker hole

Air ventilation hole

(It may be placed differently or not exist

depending on the model.)

La page est en cours de chargement...

LG TONE-FP3W Manuel utilisateur

Ce manuel convient également à

LG TONE-FP3W Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents