EZVIZ CST51C Mode d'emploi

Taper
Mode d'emploi
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make
any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the ™ website (http://www.ezviz.com).
Revision Record
New release – January, 2022
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED
AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE
PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE
TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN
AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C)
FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS,
AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE
ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND
DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE
LAW, THE LATTER PREVAILS.
Table of Contents
Overview ��������������������������������������������������������� 1
1� Package Contents ����������������������������������������������������������������������������1
2� Basics ����������������������������������������������������������������������������������������������1
Setup ��������������������������������������������������������������� 2
1� Get the EZVIZ App ����������������������������������������������������������������������������2
2� Power on Temperature & Humidity Monitor ���������������������������������������2
3� Add Temperature & Humidity Monitor �����������������������������������������������3
Installation ������������������������������������������������������ 4
Specifications ������������������������������������������������� 5
Operations on the EZVIZ App ��������������������������� 5
1� Homepage ����������������������������������������������������������������������������������������5
2� Settings��������������������������������������������������������������������������������������������5
1
Overview
1� Package Contents
Temperature & Humidity Monitor (x1)
3M Tape (x1) Regulatory Information (x1) Quick Start Guide (x1)
2� Basics
Temperature & Humidity Monitor detects and displays the indoors temperature
and humidity and then sends the related data to the linked EZVIZ gateway. After
adding the Monitor to EZVIZ APP, you can view the related data on your phone
in real time; moreover, it can trigger other EZVIZ smart products to provide you a
smart home life.
Structure
Screen
Sensor
Front View
Sensor
Rotation Direction
Mark
Support Frame
Back View
Button
Button Cell
Insulation Strip
Interior Diagram
2
Name Description
Button
• Press and hold the Button for 5s, the Temperature & Humidity Monitor
will restart and then enter device adding mode; at the same time, the
signal icon on the device screen will flashes quickly.
• Short press the Button to switch data display between degree
centigrade () and fahrenheit degree ( ).
• Quickly press the Button twice to switch between Normal Mode and
High-preformance Mode.
Display Screen
Humidity
Signal Icon
Temperature
(℃ by default)
Electric Quantity
Setup
Follow the steps to set your monitor:
1. Get the EZVIZ app.
2. Power on your Temperature & Humidity Monitor.
3. Add the Monitor to your EZVIZ account.
1� Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store
or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To find
out if an update is available, go to the app store and search for "EZVIZ".
2� Power on Temperature & Humidity Monitor
Step 1 Remove Rear Cover
Remove the rear cover of the Temperature & Humidity Monitor by rotating it
anticlockwiseasshowninthegurebelow.
It is recommended to put the Temperature & Humidity Monitor on your hands to press
and twist it by your palm.
3
Step 2 Remove Insulation Strip
Draw out the battery insulation strip with your hand.
Insulation Strip
• Please replace the battery in time when low power prompts on your phone.
• If you need to replace the battery, please purchase one CR2450.
• When replacing batteries, please insert with the positive side facing up.
3� Add Temperature & Humidity Monitor
The Monitor should be used along with EZVIZ Zigbee Smart Gateway (afterinafter
referred to as "gateway"). Please add gateway to the EZVIZ Cloud by referring to the
gateway user manual, and then add the Monitor to the gateway by following the below
steps.
Method One: Add by Scanning QR Code
1. Log in to your account through EZVIZ app, tap the device adding icon and then
the QR code scanning interface will be displayed.
2. Press and hold the Button of the Monitor for over 5s till the signal icon on
Monitorscreenashes,andthentheMonitorentersdeviceaddingmode.
Button
The Monitor will exit device adding mode automatically over 3 minutes.
3. Scan the QR code on the inner side of the cover or the cover of the user
manual, and then add the Temperature & Humidity Monitor to the gateway.
5. Add the Temperature & Humidity Monitor to the gateway by following the
wizard on the app.
6. Rotate tightly the rear cover of the Temperature & Humidity Monitor clockwise
till the aligning mark on rear cover is aligned with the mark on the front
cover.
4
Method Two: Add by the Gateway
When adding Temperature & Humidity Monitor by the gateway, place the Monitor as close to
the gateway as possible.
1. Press the Funtion Button of the gateway to make the gateway enter device
adding mode.
2. Press and hold the Button of the Monitor for over 5s till the signal icon on
Monitorscreenashes,andthentheMonitorentersdeviceaddingmode.
Button
4. The Monitor has been added to the gateway successfully and the gateway
prompts adding successfully.
5. After the Temperature & Humidity Monitor is added successfully, rotate the
Monitor rear cover clockwise to tighten the rear cover till the aligning mark on
rear cover is aligned with the mark on the front cover.
Installation
• Metal will cause ZigBee signal attenuation, so please do not install the Monitor on a metal door, it
is recommended to install it on the wall next to the door.
• Do not install the Monitor in an environment with corrosivity or intense magnetic fields.
• It is recommended that the distance between the Monitor and gateway be less than 20m. If there
are walls between them, the number of walls should be no more than 2.
• It is recommended to use the Monitor in a house with an area of no more than 200 square meters;
if your house is too large, please purchase two or more Monitors for a better using experience.
• Before sticking 3M tape, please swipe the dust on the installation surface to enhance the tape
stickiness; do not stick it on a lime wall.
Please place the Monitor on desktop as you needed, or you can stick it on the wall
below 1 meter with 3M tape.
Place on the desktop
5
Stick on the place you needed (with 3M tape)
Specications
Working Temperature -10~ 60
StoringTemperature -10~ 60
Working Humidity 0%~95%RH
Wireless Protocol Zigbee 3.0
Battery Type CR2450
Battery Duration 8 months
For additional information about the device, please refer to www.ezvizlife.com.
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you
installed on your phone shall prevail.
1� Homepage
Launch the EZVIZ app, open the homepage of the related gateway, you can manage
your Temperature & Humidity Monitor as needed on the page.
Log Detection log of the Monitor.
2� Settings
Parameter Description
Device Name Customize the name of your device.
Temperature/
Humidity Alarm
When enabled, the device will send an alarm message to
notice you that the temperature or humidity exceeds the set
values.
Temperature unit You can check the current temperature unit of the Monitor.
Performance Mode You can check the current performance mode of the Monitor.
Related Devices You can see the gateway connected to your monitor.
Device Information You can see the device information here.
Share Share your device.
Delete Device Tap to delete the Monitor from EZVIZ cloud.
Regulatory Information
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Radio Equipment
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [refer to the cover of the quick
start guide] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezviz.com/page/declaration-of-conformity.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info.
Important Safety Information
Note: Please read the manual before using the device.
Direct current.
This symbol on the device indicates that the safety compatibility manual and / or installation manual must be read, which contains
information related to the safe operation of the device.
Caution: Be sure to read these instructions before operating the equipment.
Warning: If you want to disconnect the device from the power source, please unplug the DC power terminal that connects the
power adapter and device.
Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an
explosion.
Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas.
Warning: A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or
gas.
Warning: Dispose of used batteries according to the instructions.
Warning: Replace only with the same or equivalent type recommended by the manufacturer.
Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
Warning: Do not ingest battery, Chemical Burn Hazard.
Caution: This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Caution: Keep new and used batteries away from children.
Caution: If the battery compartment does not close securely, stop using the product and keep it away from children.
Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical
attention.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
Warning: For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements of IEC/EN
60950-1, IEC/EN 62368-1.
Warning: The power source should meet limited power source or PS2 requirements according to IEC/EN 60950-1 or IEC/EN
62368-1.
102030403, C
The power source should meet limited power source or PS2 requirements according
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause undesired operation.
FCC Supplier's Declaration of Conformity
Equipment Model: refer to the cover of the quick start guide
FCC Compliance Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
And (2) this device must accept any interference received, including Interference that may cause undesirable
operation.
Responsible Party -U.S. Contact Information:
Company nameEZVIZ Inc.
Company address908 Canada Court, City of Industry, CA 91748, United States
Internet contact informationwww.ezviz.com/us
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your
body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
IFETEL Information
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicialy
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación
no deseada.
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
Informations importantes relatives à la sécurité
Remarque: Veuillez lire le manuel d’utilisation avant d’utiliser l’appareil.
Courant continu.
Ce symbole sur l’appareil indique qu’il faut lire le manuel de compatibilité de sécurité et/ou le manuel d’installation, lequel contient
des informations relatives au fonctionnement de l’appareil en toute sécurité.
Prudence: assurez-vous de bien lire ces instructions avant d’utiliser l’équipement.
Avertissement: si vous souhaitez déconnecter l’appareil de la source d’alimentation, veuillez débrancher la borne d’alimentation
CC qui relie l’adaptateur d’alimentation et l’appareil.
Avertissement: l’élimination d’une pile dans le feu ou dans un four chaud, ou l’écrasement ou le découpage mécanique d’une pile
peuvent provoquer une explosion.
Avertissement: laisser une pile dans un environnement à température extrêmement élevée peut entraîner une explosion ou une
fuite de liquide ou de gaz inflammable.
Avertissement: une pile soumise à une pression d’air extrêmement basse peut entraîner une explosion ou une fuite de liquide ou
de gaz inflammable.
Avertissement: éliminez les piles usagées conformément aux instructions.
Avertissement: remplacez les piles uniquement par le même type ou un type équivalent recommandé par le fabricant.
Prudence: CE PRODUIT EST ÉQUIPÉ D’UNE PILE REMPLAÇABLE.
Avertissement: ne pas ingérer la pile, risque de brûlure chimique.
Prudence: ce produit contient une pile bouton. si la pile bouton est avalée, celle-ci peut provoquer de graves brûlures internes en
seulement 2heures et peut entraîner la mort.
Prudence: conservez les piles neuves et usagées hors de portée des enfants.
Prudence : si le compartiment à pile ne ferme pas correctement, cessez d’utiliser le produit et gardez-le hors de portée des
enfants.
Prudence: si vous pensez que des piles ont pu être avalées ou placées dans une partie du corps, consultez immédiatement un
médecin.
Prudence: risque d’incendie ou d’explosion si la pile est remplacée par un type incorrect.
Avertissement: pour l’entrée CC TBTS: la source d’alimentation CC doit être conforme aux exigences de la norme TBTS (très
basse tension de sécurité) EN/CEI 60950-1, EN/CEI 62368-1.
Avertissement: la source d’alimentation doit être conforme aux exigences en matière de source d’alimentation limitée ou PS2
selon la norme CEI/EN 60950-1 ou CEI/EN 62368-1.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

EZVIZ CST51C Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues