REOLINK Argus PT, PT Pro 4MP PIR Sensor Camera Mode d'emploi

REOLINK
Marque
REOLINK
Modèle
Argus PT, PT Pro 4MP PIR Sensor Camera
Catégorie
Des caméras de sécurité
Taper
Mode d'emploi
July 2021
QSG2_B_EN
Reolink Argus PT / Reolink Argus PT Pro
Quick Start Guide
@ReolinkTech https://reolink.com
58.03.001.0244
English English1 2
What's in the Box
Camera
Quick Start Guide Surveillance Sign Pack of Screws Mounting
Hole Template
Camera Bracket Micro USB Cable Antenna Reset Needle
EN
Content
What's in the Box 2
Camera Introduction 3
Set up the Camera 4
Charge the Camera 6
Install the Camera 7
Safety Instructions of Battery Usage 11
Troubleshooting 12
Specication 12
NoticationofCompliance 13
English English3 4
OFF
OPEN
ON
POWER
RST
MicroSD
OFF
OPEN
ON
POWER
RST
MicroSD
OFF
OPEN
ON
POWER
RST
MicroSD
Set up the CameraCamera Introduction
Set up the Camera Using a Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
Status LED
Lens
Built-in PIR Sensor
Daylight Sensor
Built-in Mic
Speaker
Reset Hole
Micro SD Card Slot
Micro USB Port
Antenna
Battery Status LED
Power Switch
Dierent states of the status LED:
Red Light: WiFi connection failed Blinking: Standby status
Blue Light: WiFi connection succeeded On: Working status
* Press the reset button with a pin to restore
camera to factory settings.
*Rotatethecamera’slenstondthereset
hole and the SD card slot.
OFF
ON
POWER
OPEN
OPEN
POWER
OFF
ON
POWER
English English5 6
Charge the Camera
Step 3 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
ScantheQRcodeonthedeviceandfollowtheonscreeninstructionstonishinitialsetup.
Charge the battery with a power adapter.
(not included)
Charge the battery with the Reolink Solar Panel
(Not included if you only purchase the camera).
For better weatherproof performance, please
always cover the USB charging port with the
rubber plug after charging the battery.
Step 2 Launch the Reolink Client, click the “ ” button, input the UID code of the camera to add it
andfollowtheonscreeninstructionstonishinitialsetup.
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App&Client.
Set up the Camera on PC (Optional)
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
OFF
OPEN
ON
POWER
Orange LED: Charing Green LED: Fully charged
Charging Indicator:
It’s recommend to fully charge the battery before mounting the camera outdoors.
OFF
OPEN
ON
POWER
English English7 8
Install the Camera
• For outdoor use, the camera
MUST be installed upside
down for better waterproof
performance and better PIR
motionsensor’seciency.
• Install the camera 2-3 meters
(7-10 ft) above the ground. This
height maximizes the detection
range of the PIR motion sensor.
• For better motion detection
performance, please install the
camera angularly.
Drill holes in accordance with the
mounting hole template and screw the
security mount to the wall.
NOTE: If a moving object
approaches the PIR sensor
vertically, the camera may fail to
detect motion.
NOTE: Use the drywall anchors included in
the package if needed.
NOTE: For better WiFi connection, it is recommended to install the antenna upward or horizontally.
Mount the Camera
1
2
3
1
2
3
1
2
3
Install the antenna to the camera. Screw the camera to the security mount
and adjust to the proper direction.
2
1
3
Mounting Height:
2-3 Meters
PIR Detection Distance:
2-10 Meters
English English9 10
Pull the button of the security
mount and unscrew the bracket to
separate the two parts.
You are allowed to strap the camera to a tree with both the security mount and ceiling bracket.
Thread the provided strap to the plate and fasten it to a tree. Next, attach the camera to the
plate and you are good to go.
Mount the Camera to Ceiling Install the Camera with Loop Strap
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit
clockwise to lock it in position.
1
2 3
English English11 12
Safety Instructions of Battery Usage
The camera is not designed for running 24/7 at full capacity or around-the-clock live streaming.
It’s designed to record motion events and to live view remotely only when you need it. Learn useful
tips on how to extend the battery life in this post:
https://support.reolink.com/hc/en-us/articles/360006991893
1. The battery is built-in, so do not remove it from the camera.
2. Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or
Reolink solar panel. Do not charge the battery with solar panels from any other brands.
3. Charge the battery when temperatures are between 0°C and 45°C and always use the battery
when temperatures are between -20°C and 60°C.
4. Keep the USB charging port dry, clean and free of any debris and cover the USB charging port
with the rubber plug when the battery is fully charged.
5.Donotcharge,useorstorethebatterynearanyignitionsources,suchasreorheaters.
6.Donotusethebatteryifitgivesoanodor,generatesheat,becomesdiscoloredordeformed,
or appears abnormal in any ways. If the battery is being used or charged, remove the battery
from the device or the charger immediately, and stop using it.
7. Always follow the local waste and recycle laws when you get rid of the used battery.
Troubleshooting
If your camera is not powering on, please try
the following solutions:
• Make sure the power switch is turned on.
• Charge the battery with a DC 5V/2A power
adapter. When the green light is on,
the battery is fully charged
If these won’t work, contact Reolink Support.
If the camera fails to connect to WiFi, please
try the following solutions:
• Ensure that you have entered the correct
WiFi password.
• Put the camera closer to your router to
ensure a strong WiFi signal.
• Change the encryption method of the WiFi
network to WPA2-PSK/WPA-PSK
(safer encryption) on your router interface.
• Change your WiFi SSID or password and
make sure that SSID is within 31 characters
and password is within 64 characters.
If these won’t work, contact Reolink Support.
If you cannot scan the QR code on your
phone, please try the following solutions:
•Removetheprotectivelmfromthecamera
lens.
• Wipe the camera lens with a dry paper/
towel/tissue.
• Vary the distance between your camera
and the mobile phone so that the camera can
focus better.
•TrytoscantheQRcodeundersucient
lighting.
If these won’t work, contact Reolink Support.
Camera is Not Powering On
Failed to Connect to WiFi During
Initial Setup Process
Failed to Scan QR Code
on the Phone
English English13 14
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU.
This marking indicates that this product
should not be disposed with other household
wastes.throughout the EU. To prevent possible
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmentally safe recycling.
Correct Disposal of This Product
PIR Detection Distance:
Adjustable up to 10m (33ft)
PIR Detection Angle: 90° horizontal
Audio Alert:
Customized voice-recordable alerts
Other Alerts:
Instantemailalertsandpushnotications
Operating Temperature:
-10°C to 55°C (14°F to 131°F)
Size: 98 x 112 mm
Weight (Battery included): 470g (16.5 oz)
Formorespecications,visitthe
Reolinkocialwebsite.
PIR Detection & Alerts
General
Simplied EU Declaration of
Conformity
Notication of
Compliance
FCC Compliance Statement
FCC RF Exposure Warning Statements
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are
designed to provide reasonable protection
against harmful interference in a
residential installation. This equipment
generates uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
• this device may not cause harmful
interference, and
• this device must accept any interference
received, including interference that may
cause undesired operation.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment shall be installed
and operated with minimum distance 20cm
between the radiator & body.
Field of View: 105° diagonal
Night Vision: Up to 10m (33 ft)
Specication
Video
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
byturningtheequipmentoandon,the
user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuitdierentfromthattowhichthereceiver
is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Changesormodicationsnotexpressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This product comes with a 2-year limited
warranty that is valid only if purchased from
ReolinkOcialStoreoraReolinkauthorized
reseller. Learn more:
https://reolink.com/warranty-and-return/.
Limited Warranty
English English15 16
By using the Product Software that is
embedded on the Reolink product, you
agree to the terms of this End User License
Agreement (“EULA”) between you and
Reolink. Learn more:
https://reolink.com/eula/.
End User License Agreement
This device contains licence-exempt
transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the following
If you need any technical help, please visit our
ocialsupportsiteandcontactoursupport
team before returning the products,
https://support.reolink.com.
2412MHz—2462MHz (18dBm)
5GHz (For Argus PT Pro Only):
5180-5240MHz (16.09dBm)
5745-5825MHz (14.47dBm)
iSED Statements
Technical Support
OPERATING FREQUENCY
(the maximum transmitted power)
Use of the product is subject to your
agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of
reach of children.
Terms and Privacy
NOTE: We hope that you enjoy the new
purchase.Butifyouarenotsatisedwith
the product and plan to return, we strongly
suggest that you reset the camera to factory
default settings and take out the inserted SD
card before returning.
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence
contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences
et Développement économique Canada
applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) L’ appareil ne doit pas produire de
brouillage;
(2) L’ appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’ en compromettre le
fonctionnement.
Radio Frequency Exposure Statement for IC
The device has been evaluated to meet
general RF exposure requirements. The device
can be used in mobile exposure conditions.
The min separation distance is 20cm.
Déclaration d’exposition aux radiofréquences
pour IC
L’appareil a été évalué pour répondre aux
exigences générales en matière d’exposition
aux RF. L’appareil peut être utilisé dans des
conditions d’exposition mobiles. La distance
de séparation minimale est de 20cm.
Operation of this device is restricted to indoor
use only. (5180-5240MHz)
Le fonctionnement de cet appareil est limité à
une utilisation en intérieur uniquement.
(5180-5240MHz)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

REOLINK Argus PT, PT Pro 4MP PIR Sensor Camera Mode d'emploi

REOLINK
Marque
REOLINK
Modèle
Argus PT, PT Pro 4MP PIR Sensor Camera
Catégorie
Des caméras de sécurité
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents