INSTALLATION INSTRUCTIONS
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Truss Ceiling Adapter Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMA365
CMA365 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the CMA365 does not exceed
250 lbs (113.4 kg)
•The weight capacity of the CMA365 may be LIMITED
to the lowest weight capacity of any other component
or accessory used within the mounting system.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
IMPORTANT ! : The CMA365 accessory is designed for
installation to a supporting 1" -3" truss or pipe.
--SAVE THESE INSTRUCTIONS--
Installation Instructions CMA365
3
DIMENSIONS
LEGEND
2.72
69.1
DIMENSIONS: INCHES
[MILLIMETERS]
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
CMA365 Installation Instructions
4
TOOLS REQUIRED FOR INSTALLATION
PARTS
5/32"
(Included)
9/16"
A (1) B (2)
C (1)
5/16-18 x 1/4"
D (4)
3/8"
E (4)
3/8"
F (1)
5/32"
3/8" x 3-1/2" x 5-3/8"
[Truss plate]
Installation Instructions CMA365
5
ASSEMBLY AND INSTALLATION
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
1. Place two U-bolts (B) over supporting 1" - 3" truss or pipe.
(See Figure 7)
Figure 1
2. Raise truss plate (A) up and insert U-bolts through holes in
truss plate. (See Figure 2)
NOTE: If installing truss plate (A) to pipe, ensure that pipe fits
into notches in plate. (See Figure 2)
Figure 2
3. Loosely install 3/8" nuts (E) and 3/8" washers (D).
4. Level mount and tighten nuts (E).
(B) x 2
Supporting
pipe
Pipe should fit
into notches
4
(E) x 4
(A)
2
(D) x 4
2
3
CMA365 Installation Instructions
6
5. Install 1-1/2" NPT or NPSM following ANSI/ASME B1.20.1
(Schedule 40, 0.154" minimum thickness aluminum - ASTM
B221) threaded extension column (not included) into
threaded collar until tight, with a minimum of four threads
engaged. (See Figure 3)
Figure 3
6. Using 5/32" hex key (F) and 5/16-18 x 1/4" set screw (C),
secure CMA365 to threaded extension column. (See
Figure 3)
7. Complete installation following appropriate mount
installation instructions.
Extension
column
6
(C) x 1
5
(not included)
(Support pipe not shown for clarity)
Installation Instructions CMA365
7
CMA365 Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 1 on 12/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
Chief Manufacturing, a products division
of Milestone AV Technologies
8800-002148 Rev01
2012 Milestone AV Technologies, a
Duchossois Group Company
www.chiefmfg.com
12/12
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
