VTech DS6621-2 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur
DS6621
DS6621-2
DS6621-3
DS6621-4
DS662V-1F
DS662V-1G
DS662V-1H
DS662V-1J
DECT 6.0 cordless telephone with
BLUETOOTH® wireless technology
Go to www.vtechphones.com (US)
to register your product for enhanced
warranty support and latest VTech
product news.
Go to phones.vtechcanada.com (CA) for
latest VTech product news.
Abridged user’s manual
Scan the QR code for
support information
DS6621-X (CA)
DS6621-X (US)
What’s in the box
Your product package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Handset overview
1
Handset earpiece
2 LCD display
3 – MENU/SELECT
Show the menu.
While in a menu, press to select an item, or
save an entry or setting.
4 – OFF/CANCEL
Hang up a call.
Silence the ringer temporarily while the
handset is ringing.
Press and hold to erase the missed call
indicator while the phone is not in use.
Press to return to the previous menu; or
press and hold to return to idle mode,
without making changes.
5
Press repeatedly to show other dialing
options when reviewing a caller ID log
entry.
6 – MUTE/DELETE
Mute the microphone during a call.
Delete digits or characters while using the
dialing keys.
Silence the ringer temporarily while the
handset is ringing.
7 – REDIAL/PAUSE
Press repeatedly to review the redial list.
Press and hold to insert a dialing pause
while entering a number.
8 – Microphone
9
Make or answer a call using the handset
speakerphone.
During a call, press to switch between the
speakerphone and the handset.
10 –
Press to add a space when entering
names.
11 –
While you have set the dial mode to
pulse and on a call, press to switch to tone
dialing temporarily.
12 – 1
• Press repeatedly to add or remove 1 in
front of the caller ID log entry before
dialing or saving it to the phonebook.
Press and hold to set or dial your voicemail
number.
13 – /HOME/FLASH
Make or answer a home call.
• Answer an incoming home call when you
hear a call waiting alert.
14 /CELL
Make or answer a cell call.
Answer an incoming cell call when you hear
a call waiting alert.
15 VOLUME/ /
Review the phonebook when the phone is
not in use.
Increase the listening volume during a call.
• Scroll up while in a menu, or in the
phonebook, caller ID log, or redial list.
• Move the cursor to the right when
entering numbers or names.
VOLUME/ /CID
Review the caller ID log when the phone is
not in use.
Decrease the listening volume during a
call.
Scroll down while in a menu, or in the
phonebook, caller ID log, or redial list.
Move the cursor to the left when entering
numbers or names.
16 – CHARGE light
On when the handset is charging.
Telephone base overview
1 /VOL/
+
• Press to adjust the volume during message
playback.
• Press to adjust the telephone base ringer
volume when the phone is not in use.
2 – X/DELETE
Press to delete the playing message.
When the phone is not in use, press twice to
delete all previously reviewed messages.
3 – /PLAY/STOP
• P
ress to play messages.
• P
ress to stop message playback.
4 – Message window
Shows the number of messages, and other
information of the answering system or
telephone base.
5 – /SKIP
• Press to skip to the next message.
6 – /REPEAT
Press to repeat a message.
• Press twice to play the previous message.
7 – /ANS ON light
On when the answering system is on.
8 – CELL 1 and
CELL 2/HEADSET lights
• On when the telephone base is paired and
connected with a Bluetooth device
Flashes when the telephone base is in dis-
coverable mode.
9 – CELL 1 and CELL 2/HEADSET
Press to connect the paired cell Bluetooth
device.
Press and hold to add or replace a Blue-
tooth device.
10 – /ANS ON
Press to turn the answering system on or off.
11 – /FIND HANDSET
Press to page all system handsets.
12 – IN USE light
On when the handset is in use, or the an-
swering system is answering a call.
Flashes when there is an incoming call, or
another telephone sharing the same line is
in use.
Charger overview
1 – Charging pole
Display icons overview
The battery icon flashes when the
battery is low and needs charging.
The battery icon animates when the
battery is charging.
The battery icon becomes solid
when the battery is fully charged.
ECO The ECO mode activates automatically
to reduce power consumption when
the handset is within range from the
telephone base.
There are new voicemail received
from your telephone service
provider.
On when the home line is in use or
there is an incoming home call.
Flashes when there is an incoming
home waiting call.
1
2
There are Bluetooth devices
connected on the cell devices list.
On when the cell line is in use or
there is an incoming cell call.
Flashes when there is an incoming
cell waiting call.
NEW There are new caller ID log entries.
ANS ON The answering system is turned on.
The handset ringer is off.
1/25 The message number currently
playing and total number of
new/old messages recorded.
Connect
You can choose to connect the telephone base for
desktop usage or wall mounting.
NOTE
S
.
Use only the adapters provided.
Even if you do not subscribe to any conventional
telephone service, you can pair a Bluetooth enabled
cell phone to your telephone base (see Bluetooth),
and use the cell line alone without plugging in a
telephone line cord.
TIP
If you subscribe to digital subscriber line (DSL)
high-speed Internet service through your telephone
line, make sure you install a DSL filter (not included)
between the telephone line cord and telephone
wall jack. Contact your DSL service provider for more
information.
Connect the telephone base
Connect the charger
Mount the telephone base
1. Route the telephone line cord through the
rectangular hole on the wall mount bracket.
Then plug the two ends of the telephone line
cord into the telephone base and the wall
outlet as shown.
2 Align the holes on the bracket with the
standard wall plate and slide the bracket
down until it clicks securely in place.
3. Align the grooves on the telephone base with
the tabs on the wall mount bracket, and then
slide it down until it clicks securely in place.
4. Connect the power adapter to the telephone
base and an electrical outlet not controlled by
a wall switch.
Install and charge the
battery
Install the battery
Install the battery as shown below.
NOTE
S
Use only supplied battery.
If the handset will not be used for a long time,
disconnect and remove the battery to prevent
possible leakage.
Charge the battery
Place the handset in the telephone base or the
charger to charge.
Once you have installed the battery, the handset
LCD display indicates the battery status (see the
table below).
NOTE
S
For best performance, keep the handset in the
telephone base or charger when not in use.
The battery is fully charged after 12 hours of
continuous charging.
Battery
indicators
Battery status Action
The screen
is blank, or
shows Put in
charger and
flashes.
The battery has
no charge or very
little charge. The
handset cannot
be used.
Charge without
interruption
(at least 30
minutes).
The screen
shows Low
battery and
flashes.
The battery has
enough charge
to be used for a
short time.
Charge without
interruption
(at least 30
minutes).
The screen
shows
HANDSET X.
The battery is
charged. To keep the
battery charged,
place it in the
telephone base
or charger when
not in use.
Before use
After you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time, and the answering
system through voice guide.
Set date and time
NOTE
Make sure you set the date and time including the
year correctly; otherwise the answering system
does not announce the correct day of the week for
your recorded messages time stamp.
1. Use the dialing keys (0-9) to enter the month
(MM), date (DD) and year (YY). Then press
SELECT.
2. Use the dialing keys (0-9) to enter the hour
(HH) and minute (MM). Then press or
to choose AM or PM.
3. Press SELECT to save.
After the setting for the date and time, the
handset will display Voice guide to... and set up
Ans sys? alternatively.
Set answering system through voice guide
This feature assists you to do the basic setup of
the answering system. You can follow the voice
guide to record your own announcement, set the
number of rings and the message alert tone.
1. Press SELECT to start the voice guide for the
answering system setup. You hear the voice
prompt “Hello! This voice guide will assist
you with the basic setup of your answering
system.”
2. Setup your answering system by inputting
the designated numbers as instructed in the
voice guide.
Check for dial tone:
Press /HOME. If you hear a dial tone, the
installation is successful.
If you do not hear a dial tone:
Make sure the installation procedures
described above are properly done.
It may be a wiring problem. If you have
changed your telephone service to digital
service from a cable company or a VoIP
service provider, the telephone line may
need to be rewired to allow all existing
telephone jacks to work. Contact your cable/
VoIP service provider for more information.
Operating range
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even so, this
handset and telephone base can communicate
over only a certain distance - which can vary with
the locations of the telephone base and handset,
the weather, and the layout of your home or
office.
When the handset is out of range, the handset
displays Out of range or and no pwr at base
alternately.
If there is a call while the handset is out of range,
it may not ring, or if it does ring, the call may
not connect well when you press /HOME or
/CELL. Move closer to the telephone base,
and then press /HOME or /CELL to answer
the call. If the handset moves out of range
during a telephone conversation, there may be
interference. To improve reception, move closer
to the telephone base.
Bluetooth
To use a Bluetooth enabled cell phone or headset
with your DS6621/DS662V, you must first pair
and connect your Bluetooth cell phone or headset
with the telephone base.
Bluetooth wireless technology operates within
a short range (a maximum of approximately 30
feet). When you pair a Bluetooth cell phone to
the telephone base, place your Bluetooth cell
phone closer to the telephone base to maintain
sufficient signal strength.
NOTE
For optimal performance, keep your cell phone
within 15 feet of the telephone base while using
the cell line.
Pair and connect your Bluetooth enabled
cell phone
1. Choose a slot to pair the cell phone.
Press and hold CELL 1 or
CELL 2/HEADSET on the telephone
base until you hear a confirmation tone,
and the CELL 1 or CELL 2/HEADSET light
flashes.
2. Turn on the Bluetooth feature of your cell
phone. Once your cell phone finds your
VTech phone (VTech DS6621/DS662V),
press appropriate key on your cell phone to
continue the pairing process.
Your cell phone may prompt you to enter
the PIN of the telephone base. The default
PIN of the telephone base is 0000.
When the cell phone is connected to the
telephone base, the corresponding status icon
(1 or 2) displays. The corresponding device light
( CELL 1 or CELL 2/HEADSET) turns on.
If the pairing fails, turn off the Bluetooth feature
on your cell phone and on the DS6621 by
pressing CELL 1 or CELL 2/HEADSET. Then
repeat the steps above to pair and connect
again. In some cases, it may take you a few
attempts to complete the pairing process.
Pair and connect your Bluetooth enabled
headset
1. Press MENU on the phone when it is not in use.
2. Press or to scroll to Bluetooth, and then
press SELECT.
3. Press or to scroll to Add BT headset, and
then press SELECT. The screen displays Search
headset...
4. Set your headset to discoverable mode. Once
your handset finds your headset, press SELECT.
Enter the PIN of your headset if required.
The PIN for most Bluetooth devices is
0000 (refer to the user’s manual of your
headset), and then press SELECT.
When the headset is successfully paired and
connected to the telephone base, the 2 icon
displays. The CELL 2/HEADSET light turns on.
VTech Connect to CellTM application
This application helps you integrate
your Android phones with your DS6621.
For more information and application
download, scan the QR code on the
right, or go to
https://www.vtechphones.com/app_connect_to_cell.
Download contacts from your Bluetooth
cell phone
1. Press MENU when the phone is not in use.
2. Scroll to Bluetooth, and then press SELECT.
3. Scroll to Download PB, and then press
SELECT.
4. Scroll to select the desired cell phone, and
then press SELECT.
NOTE
S
For certain cell phones, you may need to press a
key on your cell phone to confirm the phonebook
download.
The performance of phonebook download feature
depends on the compatibility of your Bluetooth
cell phone. Refer to the user’s manual of your cell
phone for more information about how that device
uses Bluetooth connectivity.
Certain cell phones do not support SIM card
download. If this is the case, transfer the contacts from
your SIM card to your cell phone memory first. Then
download from your cell phone memory. For more
information on how to transfer contacts from your
SIM card to your cell phone memory, see the user’s
manual of your cell phone.
For Android cell phones, you may also
download your cell phone contacts to
your DS6621/DS662V via the
VTech Contact Share application.
Scan the QR code on the right, or
go to
www.vtechphones.com/apps/contact_share for
application download.
Using the handset menu
1. Press MENU when the phone is not in use.
2. Press
or
until the screen displays the
desired feature menu.
3. Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Configure your
telephone
Set language
The LCD language is preset to English. You can
select English, French or Spanish to be used in all
screen displays.
1. Press MENU when the handset is not in use.
2. Scroll to Settings, and then press
SELECT twice.
3. Scroll to choose English, Français or Español.
4. Press SELECT to save.
Set date and time
NOTE
Make sure you set the date and time including the
year correctly; otherwise the answering system
does not announce the correct day of the week for
your recorded messages time stamp.
1. Press MENU when the handset is not in use.
2. Scroll to Set date/time, and then press
SELECT.
3. Use the dialing keys (0-9) to enter the month
(MM), date (DD) and year (YY). Then press
SELECT.
4. Use the dialing keys (0-9) to enter the hour
(HH) and minute (MM). Then press or
to choose AM or PM.
5. Press SELECT to save.
Temporary tone dialing
If you have pulse (rotary) service only, you can
switch from pulse to tone dialing temporarily
during a call.
1. During a call, press .
2. Use the dialing keys to enter the relevant
number. The telephone sends touch-tone
signals. It automatically returns to pulse
dialing mode after you end the call.
Telephone operation Make a home call
Press /HOME or , and then dial the
telephone number.
-OR-
Enter the telephone number on the handset
or base, and then press /HOME or to dial.
Make a cell call
Press /CELL on the handset or base.
Enter the telephone number, and then press
/CELL to dial.
-OR-
Enter the telephone number on the handset
or base, and then press /CELLto dial.
NOTE
S
After first pressing /CELL, you may need to choose
a cell device. Scroll to select the desired cell device
when necessary, and then press SELECT.
While using the cell line, place your cell phone
closer to the base, and make sure that there are no
physical obstacles between the base and the cell
phone, such as large furniture or thick walls.
Answer a home/cell call
Press /HOME, /CELL, , or any dialing key.
End a home/cell call
Press OFF on the handset, or put the handset to
the base or charger.
Speakerphone
During a call, press on the handset to switch
between speakerphone and normal handset use.
Volume
During a call, press /VOLUME/ on the
handset to adjust the listening volume.
NOTE
The handset earpiece volume setting and speakerphone
volume setting are independent.
Mute
The mute function allows you to hear the other
party but the other party cannot hear you.
1. During a call, press MUTE on the handset or
telephone base. The screen displays Muted.
2. Press MUTE again to resume the conversation.
The screen displays Microphone ON.
Call waiting
When you subscribe to call waiting service from
your telephone service provider, you hear an
alert tone if there is an incoming call while you
are on another call.
Call waiting on the home line:
Press FLASH to put the current call on hold
and take the new call.
Press FLASH to switch back and forth
between calls.
Call waiting on the cell line:
Press /CELL 1 or /CELL 2, to put the
current call on hold and take the new call.
Press /CELL 1 or /CELL 2 to switch back
and forth between calls.
Find handset
Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the telephone
base. All idle handsets ring and display **
Paging **.
To end paging:
Press /FIND HANDSET again on the
telephone base.
-OR-
Press /HOME, /CELL, , CANCEL, or any
dialing key on the handset.
-OR-
Place the handset in the telephone base or
charger.
NOTE
Do not press and hold /FIND HANDSET for
more than four seconds. It may lead to handset
deregistration.
Join a call in progress
You can use up to two system handsets at a
time on a home line call. You can buy additional
expansion handsets (DS6600) for this telephone
base. You can register up to five handsets to the
telephone base.
When a handset is on a home call, press
/HOME or on another handset to join the
call.
Press OFF to exit the call. The call continues
until all handsets hang up.
Intercom
Use the intercom features for conversations
between two devices.
1. Press MENU on your handset when not in use.
2. Press
or
to scroll to Intercom, and then
press SELECT. Use the dialing keys to enter a
destination device number.
3. To answer the intercom call, press /HOME,
/CELL, , or any dialing key on the
destination handset.
4. To end the intercom call, press OFF or place
the handset back in the telephone base or
charger.
Transfer a call
While on an outside call, you can use the
intercom feature to transfer the call from one
handset to another.
1. Press MENU on your handset during a call.
2. Press
or
to scroll to Intercom, and then
press SELECT. The current call is put on hold.
Use the dialing keys to enter a destination
device number.
3. To answer the intercom call, press /
HOME, /CELL, , or any dialing key on
the destination handset. You can now have
a private conservation before transferring
the call.
4. To transfer the call, press OFF on the
initiating handset or place the initiating
handset back in the telephone base or
charger.
5. To end the call, press OFF on the destination
handset or place the destination handset
back in the telephone base or charger.
Answer an incoming call during an intercom
call
If you receive an incoming call during an
intercom call, there is an alert tone.
To answer a home call, press /HOME. The
intercom call ends automatically.
To end the intercom call without answering
the outside call, press OFF. The intercom call
ends and the telephone continues to ring.
To answer a cell call, press OFF to end the
intercom call. The telephone continues to
ring. Then press /CELL.
Redial list
Each handset stores the last 10 telephone
numbers dialed. When there are already 10
entries, the oldest entry is deleted to make room
for the new entry.
Review the redial list
1. Press REDIAL when the handset is not in use.
2. Press , , or REDIAL repeatedly until the
desired entry displays.
Dial a redial list entry
Press /HOME, /CELL, or to dial.
Delete a redial list entry
When the desired redial entry displays, press
DELETE.
Phonebook
The phonebook can store up to 1000 entries,
which are shared by all handsets. Each entry may
consist of a telephone number up to
30 digits, and a name up to 15 characters.
Add a phonebook entry
1. Press MENU when the phone is not in use.
2. Scroll to Phonebook then press SELECT.
3. Press SELECT again to choose Add new
entry.
4. Enter the number.
Use the dialing keys to enter the number
(up to 30 digits).
5. Press SELECT to move to the name.
6. Use the dialing keys to enter the name (up to 15
characters). Additional key presses show other
characters of that particular key.
7. Press SELECT to save.
While entering numbers and names, you can:
Press DELETE to erase a digit or character.
Press and hold DELETE to erase the entire
entry.
Press or to move the cursor to the left or
right.
Press and hold PAUSE to insert a dialing pause
(for entering phone numbers only).
Press 0 to add a space (for entering names
only).
Press to add ( appears) or to add
# ( appears)
(for entering phone numbers
only)
.
Review the phonebook
Entries are sorted alphabetically.
1. Press when the phone is not in use.
2. Scroll to browse through the phonebook, or
use the dialing keys to start a
name search (you can enter up to
3 characters for the search).
3. When the desired entry appears, press
or to dial.
Delete a phonebook entry
1. When the desired entry displays, press
DELETE.
2. When the screen displays Delete entry?,
press SELECT.
1 set for DS6621/
DS662V-1F/
DS662V-1G/
DS662V-1H/
DS662V-1J/;
2 sets for DS6621-2;
3 sets for DS6621-3
4 sets for DS6621-4
Abridged user’s
manual
1 set for DS6621-2;
2 sets for DS6621-3
3 sets for DS6621-4
Important safety
instructions
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
4. CAUTION: Do not install the telephone base at a height
above 2 meters.
5. Do not use this product near water such as near a bath tub,
wash bowl, kitchen sink, laundry tub or a swimming pool, nor in
a wet basement or shower.
6. Do not place this product on an unstable table, shelf, stand or
other unstable surfaces.
7. Avoid placing the telephone system in places with extreme
temperature, direct sunlight, or other electrical devices. Protect
your phone from moisture, dust, corrosive liquids and fumes.
8. Slots and openings in the back or bottom of the telephone base
and handset are provided for ventilation. To protect them from
overheating, these openings must not be blocked by placing
the product on a soft surface such as a bed, sofa or rug. This
product should never be placed near or over a radiator or heat
register. This product should not be placed in any area where
proper ventilation is not provided.
9. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply in your home or office, consult your
dealer or local power company.
10. Do not allow anything to rest on the power cord. Do not install
this product where the cord may be walked on.
11. Never push objects of any kind into this product through the
slots in the telephone base or handset because they may touch
dangerous voltage points or create a short circuit. Never spill
liquid of any kind on the product.
12. To reduce the risk of electric shock, do not disassemble this
product, but take it to an authorized service facility. Opening
or removing parts of the telephone base or handset other than
specified access doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause electric shock
when the product is subsequently used.
13. Do not overload wall outlets and extension cords.
14. Unplug this product from the wall outlet and refer servicing to
an authorized service facility under the following conditions:
When the power supply cord or plug is damaged or
frayed.
If liquid has been spilled onto the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operation instructions. Improper
adjustment of other controls may result in damage and
often requires extensive work by an authorized technician
to restore the product to normal operation.
If the product has been dropped and the telephone base
and/or handset has been damaged.
If the product exhibits a distinct change in performance.
15. Avoid using a telephone (other than cordless) during an
electrical storm. There is a remote risk of electric shock from
lightning.
16. Do not use the telephone to report a gas leak in the vicinity
of the leak. Under certain circumstances, a spark may be
created when the adapter is plugged into the power outlet,
or when the handset is replaced in its cradle. This is a common
event associated with the closing of any electrical circuit.
The user should not plug the phone into a power outlet,
and should not put a charged handset into the cradle, if the
phone is located in an environment containing concentrations
of flammable or flame-supporting gases, unless there is
adequate ventilation. A spark in such an environment could
create a fire or explosion. Such environments might include:
medical use of oxygen without adequate ventilation;
industrial gases (cleaning solvents; gasoline vapors; etc.); a
leak of natural gas; etc.
17. Only put the handset of your telephone next to your ear when
it is in normal talk mode.
18. The power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed to
hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet.
19. For pluggable equipment, the socket-outlet shall be installed
near the equipment and shall be easily accessible.
20. CAUTION: Use only the batteries indicated in this
manual. There may be a risk of explosion if a wrong type of
battery is used. Use only the supplied rechargeable batteries
or replacement batteries (BT183342/BT283342).Do not dispose
of batteries in a fire. They may explode. Dispose of used
battery according to the instruction. Disconnect the telephone
line from the equipment before open the battery door.
Do not use the battery in following conditions:
» High or low extreme temperature during use, storage
or transportation.
» Replacement of a battery with an incorrect type that
can defeat a safeguard.
» Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can
result in an explosion.
» Leaving a battery in an extremely high temperature
surrounding environment that can result in an explosion
or the leakage of flammable liquid or gas.
» A battery subjected to extremely low air pressure that
can result in an explosion or the leakage of flammable
liquid or gas.
21. Use only the adapter included with this product. Incorrect
adapter polarity or voltage can seriously damage the product.
22. The applied nameplate is located at the bottom or near of the
product. SAVE THESE INSTRUCTIONS
Battery
Use only the batteries provided or equivalent. To order a
replacement, visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to
phones.vtechcanada.com or call 1 (800) 267-7377.
Do not dispose of the battery in a fire. Check with local waste
management codes for special disposal instructions.
Do not open or mutilate the battery. Released electrolyte is
corrosive and may cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
Exercise care in handling batteries in order not to create a short
circuit with conductive materials.
Charge the battery provided with this product only in
accordance with the instructions and limitations specified in
this manual.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable wireless telephones and
implanted cardiac pacemakers. Supported by the U.S. Food and
Drug Administration, WTR recommends to physicians that:
Pacemaker patients
Should keep wireless telephones at least six inches from the
pacemaker.
Should NOT place wireless telephones directly over the
pacemaker, such as in a breast pocket, when it is turned ON.
Should use the wireless telephone at the ear opposite the
pacemaker.
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using wireless telephones.
About cordless telephones
Privacy: The same features that make a cordless telephone
convenient create some limitations. Telephone calls are
transmitted between the telephone base and the cordless
handset by radio waves, so there is a possibility that the
cordless telephone conversations could be intercepted
by radio receiving equipment within range of the cordless
handset. For this reason, you should not think of cordless
telephone conversations as being as private as those on
corded telephones.
Electrical power: The telephone base of this cordless
telephone must be connected to a working electrical outlet.
The electrical outlet should not be controlled by a wall
switch. Calls cannot be made from the cordless handset if the
telephone base is unplugged, switched off or if the electrical
power is interrupted.
Potential TV interference: Some cordless telephones operate
at frequencies that may cause interference to televisions and
VCRs. To minimize or prevent such interference, do not place
the telephone base of the cordless telephone near or on top
of a TV or VCR. If interference is experienced, moving the
cordless telephone farther away from the TV or VCR often
reduces or eliminates the interference.
Rechargeable batteries: Exercise care in handling batteries
in order not to create a short circuit with conducting material
such as rings, bracelets and keys. The battery or conductor
may overheat and cause harm. Observe proper polarity
between the battery and the battery charger.
Nickel-metal hydride rechargeable batteries: Dispose of
these batteries in a safe manner. Do not burn or puncture
the battery. Like other batteries of this type, if burned or
punctured, they could release caustic material which could
cause injury.
a
b
c
d
e
f
g
h
i
j
n
p
o
k
l
m
a
b
c
d
e
f
g
h
i
j
k
l
a
A
THIS SIDE UP
THIS SIDE UP
Handset control key panel:
CHARGE light
remains on
when charging.
Specifications are subject to change without notice.
© 2022 VTech Communications, Inc.
© 2022 VTech Technologies Canada Ltd
All rights reserved. 10/22. DS6621-X_US-CAN_ACIB_V9
Transmit
frequency
DECT frequency:
1921.536-1928.448 MHz
Bluetooth frequency:
2402.000-2480.000 MHz
Channels DECT: 5
Bluetooth: 79
Nominal effective
range
Maximum power allowed by FCC and IC. Actual operating range may vary
according to environmental conditions at the time of use.
Power
requirement
Handset: 2.4V Ni-MH battery
Telephone base: 6V DC @ 0.4A
Charger: 6V DC @ 0.4A
Memory Phonebook:
1000 memory locations (shared between home and cell lines);
up to 30 digits and 15 characters
Caller ID log:
50 memory locations;
up to 24 digits and 15 characters
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of
the Telecommunications Industry Association. Used under license.
T
Compatible with
Hearing Ai
d T-Coil
TIA-1083
Technical specifications
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any
use of such marks by VTech Holdings Limited is under license. VTech Holdings
Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are
those of their respective owners.
Frequently asked
questions
The following are the questions most frequently asked
about the cordless telephone. If you cannot find the
answer to your question, visit our website at
www.vtechphones.com or call 1 (800) 595-9511 for
customer service. In Canada, go to
phones.vtechcanada.com or call 1 (800) 267-7377.
My telephone
does not work
at all.
Make sure the telephone base is
installed properly, and battery is
installed and charged correctly.
For optimum daily performance,
return the handset to the
telephone base after use.
The display shows
No line. I cannot
hear the dial tone.
Disconnect the telephone line
cord from your telephone and
connect it to another telephone.
If there is no dial tone on that
other telephone either, then
the telephone line cord may be
defective. Try installing a new
telephone line cord.
If changing telephone line cord
does not help, the wall jack (or
the wiring to this wall jack) may be
defective. Contact your telephone
service provider.
You may be using a new cable
or VoIP service, the existing
telephone jacks in your home
may no longer work. Contact your
service provider for solutions.
The display shows
To register HS...
and ...see manual
alternately. The
handset does not
work at all.
The handset is deregistered from
the telephone base.
Place the handset in the telephone
base to register it back. The
handset shows Registered and
you hear a beep when the
registration process completes.
This process takes about 90
seconds to complete.
I cannot add and
connect my cell
phone or headset
to the telephone
base.
Make sure you have cellular
coverage and the Bluetooth
function of your cell phone or
headset is turned on. See the
user’s manual of your cell phone or
headset for more information.
Make sure that the telephone base
is in discoverable mode.
Carefully follow the pairing
instructions in this manual. Make
sure that your Bluetooth cell phone
or headset is not connected to
any other Bluetooth device, and is
connected to the telephone base
and active on the device list.
Turn off your cell phone or headset,
and then turn it on again.
The cell phone
reception in my
house is poor and
I cannot connect
it to my DS6621/
DS662V.
If there is a location in your
house with better reception,
you can leave your cell phone at
that location while you use the
DS6621/DS662V cell line. In order
for this to work, the telephone
base must be within 30 feet of the
cell phone.
The answering
system does not
record messages.
Make sure the answering system is
on. When the answering system is
on, ANS ON should display on the
handset and the telephone base.
When the answering machine
memory is full, it does not record
new messages until some old
messages are deleted.
If you subscribe to voicemail
service, change the number of
rings so that your answering system
answers before your voicemail
service answers. To determine how
many rings activate your voicemail
service, contact your telephone
service provider.
The answering
system does
not announce
the correct day
of the week
for recorded
messages time
stamp.
Make sure you have set the date
and time. See Configure your
telephone section.
The messages on
the answering
system are
incomplete.
If a caller leaves a very long
message, part of it may be lost
when the answering system
disconnects the call after the preset
recording time.
If the memory on the answering
system becomes full during a
message, the answering system
stops recording and disconnects
the call.
I accidentally set
my LCD language
to Spanish or
French, and I
don’t know how
to change it back
to English.
While the handset is not in use,
press MENU and then enter
364 to change the handset LCD
language back to English.
Need help?
For operations and guides to help you using
your telephone, and for latest information
and supports, go and check the online help
topics and online FAQs.
Use your smartphone or mobile device to
access our online help.
Go to
https://help.vtechphones.com/ds6621;
OR
Scan the QR code on the right. Launch
the camera app or QR code scanner app
on your smartphone or tablet. Hold the
device’s camera up to the QR code and
frame it. Tap the notification to trigger the
redirection of the online help.
- If the QR code is not clearly displayed,
adjust your camera’s focus by moving
your device closer or further away until
it is clear.
You can also call our Customer Support at 1
(800) 595-9511 [in US] or
1 (800) 267-7377 [in Canada] for help.
For C-UL compliance
only
Mesures de sécurité importantes
Afin de réduire les risques d’incendie, de blessures
corporelles ou d’électrocution, suivez toujours ces mesures
préventives de base lorsque vous utilisez votre téléphone :
1. Lisez et comprenez bien toutes les instructions.
2. Observez toutes les instructions et mises en garde
inscrites sur l’appareil.
3. Débranchez ce téléphone de la prise murale avant de
le nettoyer. N’utilisez pas de nettoyeurs liquides ni en
aérosol. N’utilisez qu’un chiffon doux et légèrement
humecté.
4. ATTENTION: Ne pas installer le socle téléphonique à
une hauteur surieure à 2 mètres.
5. N’utilisez pas ce produit près de l’eau, tel que près d’un
bain, d’un lavabo, d’un évier de cuisine, d’un bac de
lavage ou d’une piscine, ou dans un sous-sol humide ou
sous la douche.
6. Ne déposez pas ce téléphone sur un chariot, support
ou table chancelants. L’appareil pourrait tomber et être
sérieusement endommagé.
7. Évitez d’installer le système téléphonique dans les
endroits soumis à une température extrême, à la lumière
directe du soleil ou à proximité immédiate d’autres
appareils électriques ou électroniques. Protégez votre
téléphone contre les sources d’humidité, la poussière,
les vapeurs et les liquides corrosifs.
8. Le boîtier de l’appareil est doté de fentes et
d’ouvertures d’aération situées à l’arrière ou en dessous.
Afin d’emcher la surchauffe, ces ouvertures ne
doivent pas être obstruées en plaçant l’appareil
sur un lit, divan, tapis ou autre surface similaires. Ne
placez pas cet appareil à proximité d’un ément de
chauffage ni d’une plinthe électrique. De plus, ne
l’installez pas dans une unité murale ou un cabinet
fermé qui ne possède pas d’aération adéquate.
9. Ne faites fonctionner cet appareil qu’avec le type
d’alimentation indiqué sur les étiquettes de l’appareil.
Si vous ne connaissez pas le voltage de votre maison,
consultez votre marchand ou votre fournisseur
d’électricité.
10. Ne déposez rien sur le cordon d’alimentation. Installez
cet appareil dans un endroit sécuritaire, là où personne
ne pourra trébucher sur la ligne d’alimentation ni le
cordon téléphonique modulaire.
11. N’insérez jamais d’objets à travers les fentes et
ouvertures de cet appareil, car ils pourraient toucher
à des points de tension dangereux ou court-circuiter
des pièces, ce qui constituerait un risque d’incendie
ou d’électrocution. N’échappez pas de liquides dans
l’appareil.
12. Afin de réduire les risques d’électrocution, ne
démontez pas l’appareil, mais apportez-le plutôt
à un centre de service qualifié s’il doit être réparé.
En enlevant le couvercle, vous vous exposez à des
tensions dangereuses ou autres dangers similaires.
Un remontage inaquat peut être à l’origine d’une
électrocution lors d’une utilisation ultérieure de
l’appareil. Débranchez l’appareil avant de procéder au
nettoyage. Utilisez un chiffon humide et doux.
13. Ne surchargez pas les prises de courant et les rallonges.
14. Débranchez cet appareil de la prise de courant et
communiquez avec le département de service à la
clientèle de VTech dans les cas suivants :
Lorsque le cordon d’alimentation est endommagé
ou écorché.
Si du liquide a été échappé dans l’appareil.
Si l’appareil a été exposé à une source d’humidité
telle que la pluie ou l’eau.
Si le produit ne fonctionne pas normalement en
respectant les instructions de fonctionnement.
Réglez uniquement les commandes indiquées dans
le les instructions de fonctionnement. Les réglages
incorrects des autres commandes pourraient
provoquer un dommage qui pourrait exiger un
travail exhaustif de la part d’un technicien autorisé
afin de rétablir le fonctionnement normal de
l’appareil.
Si le produit a été échappé et que le socle et/ou le
combiné a été endommagé.
Si le produit afche une nette diminution de sa
performance.
15. Évitez d’utiliser un téléphone (autre qu’un sans fil)
pendant un orage. Les éclairs peuvent être à l’origine
d’une électrocution.
16. N’utilisez pas le téphone pour rapporter une fuite de
gaz à proximité de la fuite. En certaines circonstances,
une flammèche pourrait être provoqe lorsque
l’adaptateur est branché à une prise de courant, ou
lorsque le combiné est déposé sur le socle. Ceci
est un événement commun associé à la fermeture
d’un circuit électrique. L’utilisateur ne devrait pas
brancher le téléphone à une prise de courant, et ne
devrait pas déposer le combiné chargé sur le socle,
si le téléphone se trouve à proximité d’un endroit
comportant des concentrations de gaz inflammables, à
moins que la ventilation soit adéquate. Une flamche
dans un tel endroit pourrait provoquer un incendie
ou une explosion. De tels environnements peuvent
comprendre: des endroits où l’on utilise de l’oxygène
médical sans ventilation adéquate; des gaz industriels
(dissolvants de nettoyage, des vapeurs d’essence, etc.);
une fuite de gaz naturel, etc.
17. Ne placez que le combiné de votre téléphone près de
votre oreille lorsqu’en mode de conversation.
18. Ces adaptateurs ont été conçus pour être orientés en
position verticale ou montés au sol. Les broches ne sont
pas conçues pour maintenir l’adaptateur en place si
celui-ci est barnché dans une prise au plafond ou sous
une table/ armoire.
19. Pour le MATERIEL RACCORDE PAR PRISE DE COURANT,
le socle de prise de courant doit etre installe a proximite
du materiel et doit etre aisement accessible.
20. MISE EN GARDE: Il peut y avoir un risque
d’explosion si vous utilisez le mauvais type de
piles pour le téléphone. N’utilisez que les piles
rechargeable inclus ou les piles de rechange
(BT183342/BT283342). N’incinérez pas les piles.
Celles-ci risqueraient d’exploser. Mettre au rebut les
batteries usagées conformément aux instructions du
fabricant. Débrancher les lignes téléphoniques avant le
remplacement des piles.
Évite d’utiliser la batterie dans les conditions
suivantes:
» des températures extrêmes faibles ou élevées
auxquelles une batterie peut être soumise
pendant l’utilisation, le stockage ou le transport;
» Remplacement d’une batterie par un type
incorrect pouvant supprimer une protection;
» mise au rebut d’une batterie dans un feu ou
dans un four chaud, ou écrasement mécanique
ou coupure d’une batterie, susceptible de
provoquer une explosion;
» maintien d’une batterie dans un environnement
à très haute température pouvant provoquer
une explosion ou la fuite de liquide ou de gaz
inflammables;
» batterie soumise à une pression de l’air
extrêmement faible pouvant provoquer une
explosion ou la fuite de liquide ou de gaz
inflammables.
21. N’utilisez que les adaptateurs inclus avec ce produit.
L’utilisation d’un adaptateur dont la polarité ou la
tension serait inadéquate risque d’endommager
sérieusement le produit et mettre votre sécurité en
péril.
22. La plaque signalétique appliquée est située au bas ou à
proximité du produit.
CONSERVEZ CES INSTRUCTIONS
Pile
N’utilisez que la pile incluse ou l’équivalent.
Ne jetez pas la pile au feu. Vérifiez les instructions
spécifiques de mise aux rebus auprès des autorités
locales.
N’ouvrez pas et ne mutilez pas la pile. L’électrolyte
qui s’en échapperait est corrosif et pourrait causer
des brûlures ou des blessures aux yeux ou à la peau.
L’électrolyte est toxique si avalé.
Soyez prudents lorsque vous manipulez les piles afin
d’éviter les courts-circuits provoqs par des matériaux
conducteurs.
Rechargez la pile incluse avec cet appareil, selon
les instructions et limites spécifiées dans ce guide
d’utilisation.
Stimulateurs cardiaques implantés dans l’organisme
Les simulateurs cardiaques (s’applique uniquement aux
téléphones numériques sans fil) :
L’organisme ‘Wireless Technology Research, LLC (WTR)’,
une firme de recherche indépendante, a mené une
évaluation pluridisciplinaire des interférences entre les
téléphones sans fil portatifs et les stimulateurs cardiaques
implantés dans l’organisme. Appuyée par l’Administration
des aliments et drogues (FDA) des États-Unis, la firme WTR
recommande aux médecins :
Avis aux détenteurs de stimulateurs cardiaques
Ils doivent tenir le téléphone sans fil à une distance d’au
moins six pouces du stimulateur cardiaque.
Ils ne doivent PAS placer le téléphone sans fil
directement sur le stimulateur cardiaque, tel que dans
une poche de chemise, lorsque celui-ci est en marche.
Ils doivent utiliser le téphone sans fil en l’appuyant
sur l’oreille qui se trouve dans la direction oppoe au
stimulateur cardiaque.
L’étude effecte par l’organisme WRS n’a pas identifié
de risque pour les détenteurs de simulateurs cardiaques
causés par les gens qui utilisent un téphone sans fil à
proximité de ceux-ci.
À propos des téléphones sans fil
Confidentialité : Les mêmes caractéristiques qui constituent
des avantages pour les téléphones sans fil afchent
également des restrictions. Les appels téléphoniques
sont transmis entre le combiné sans fil et le socle par
le biais d’ondes radio ; il y a donc la possibilité que vos
conversations téléphoniques sans fil soient interceptées
par des équipements de réception radio se trouvant dans
la pore du combiné sans fil. Pour cette raison, vous ne
devez pas percevoir les communications téléphoniques
sans fil comme étant aussi confidentielles que celles des
téléphones à cordons.
Alimentation électrique : Le socle de ce téléphone sans
fil doit être branché à une prise électrique fonctionnelle.
La prise électrique ne doit pas être contrôe par un
interrupteur mural. Les appels ne pourront pas être
effects du combiné sans fil si le socle est débranché ou
mis hors tension ou si le courant est coupé.
Possibilité d’interférences aux téléviseurs : Certains
téléphones sans fil fonctionnent sur des fréquences
pouvant causer des interférences aux téléviseurs et aux
magnétoscopes. Pour réduire ou prévenir de telles
interrences, ne placez pas le socle du téphone sans
fil près ou sur un téléviseur ou magnétoscope. S’il y
a présence de parasites, il est conseillé d’éloigner le
téléphone sans fil du téléviseur ou du magnétoscope afin
de réduire possiblement les interférences.
Piles rechargeables : Manipulez les piles avec soin afin de
ne pas les court-circuiter avec des bagues, bracelets ou
clés. Les piles ou le conducteur peut surchauffer et causer
des blessures. Respectez la polarité adéquate entre la pile
et le chargeur.
Les bloc-piles rechargeables à l’hydrure métallique de
nickel : Jetez ces blocs-piles de manre écologique et
curitaire. Ne les incinérez pas et ne les percez pas. Tel que
les autres piles de ce type, elles pourraient dégager une
matière toxique qui peut causer des blessures corporelles
si elles sont brûlées ou peres.
The RBRC seal
The RBRC seal on the Ni-MH battery indicates
that VTech Communications, Inc. is voluntarily
participating in an industry program to collect
and recycle these batteries at the end of their
useful lives, when taken out of service within
the United States and Canada.
The program provides a convenient alternative to placing
used Ni-MH batteries into the trash or municipal waste, which
may be illegal in your area.
VTech’s participation makes it easy for you to drop off the
spent battery at local retailers participating in the program or at
authorized VTech product service centers. Please call
1 (800) 8 BATTERY® for information on Ni-MH battery
recycling and disposal bans/restrictions in your area. VTech’s
involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.
The RBRC Seal and 1 (800) 8 BATTERY® are registered
trademarks of Call2recycle, Inc.
FCC, ACTA and IC
regulations
FCC Part 15
NOTE: This equipment has been tested and found to
comply with the requirements for a Class B digital device
under Part 15 of the Federal Communications Commission
(FCC) rules. These requirements are intended to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modifications to this equipment
not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation. Privacy
of communications may not be ensured when using this
telephone.
To ensure safety of users, the FCC/ISEDC has established
criteria for the amount of radio frequency energy that
can be safely absorbed by a user or bystander according
to the intended usage of the product. This product has
been tested and found to comply with the FCC/ISEDC
criteria. The handset may be safely held against the ear of
the user. For body worn operation, this handset has been
tested and meets the FCC/ISEDC RF exposure guidelines
when used with the accessories supplied or designated
for this product. Use of other accessories may not ensure
compliance with FCC/ISEDC RF exposure guidelines. The
telephone base shall be installed and used such that parts
of the user’s body other than the hands are maintained at a
distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian
requirement:
CAN ICES-3 (B)/NMB-3(B).
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and
with technical requirements adopted by the Administrative
Council for Terminal Attachments (ACTA). The label
on the back or bottom of this equipment contains,
among other things, a product identifier in the format
US:AAAEQ##TXXXX. This identifier must be provided to
your telephone service provider upon request.
The plug and jack used to connect this equipment to
premises wiring and the telephone network must comply
with applicable Part 68 rules and technical requirements
adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed
to be connected to a compatible modular jack that is
also compliant. An RJ11 jack should normally be used for
connecting to a single line. See the installation instructions
in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine
how many devices you may connect to your telephone
line and still have them ring when you are called. The REN
for this product is encoded as the 6th and 7th characters
following the US: in the product identifier (e.g., if ## is 03,
the REN is 0.3). In most, but not all areas, the sum of all RENs
should be five (5.0) or less. For more information, please
contact your telephone service provider.
This equipment must not be used with Party Lines. If you
have specially wired alarm dialing equipment connected
to your telephone line, ensure the connection of this
equipment does not disable your alarm equipment. If you
have questions about what will disable alarm equipment,
consult your telephone service provider or a qualified
installer.
If this equipment is malfunctioning, it must be unplugged
from the modular jack until the problem has been
corrected. Replacement to this telephone equipment can
only be made by the manufacturer or its authorized agents.
For replacement procedures, follow the instructions
outlined under the Limited warranty.
If this equipment is causing harm to the telephone
network, the telephone service provider may temporarily
discontinue your telephone service. The telephone service
provider is required to notify you before interrupting
service. If advance notice is not practical, you will be
notified as soon as possible. You will be given the
opportunity to correct the problem and the telephone
service provider is required to inform you of your right
to file a complaint with the FCC. Your telephone service
provider may make changes in its facilities, equipment,
operation, or procedures that could affect the proper
functioning of this product. The telephone service provider
is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless
handset, it is hearing aid compatible.
If this product has memory dialing locations, you may
choose to store emergency telephone numbers (e.g.,
police, fire, medical) in these locations. If you do store or
test emergency numbers, please:
Remain on the line and briefly explain the reason for the
call before hanging up.
Perform such activities in off-peak hours, such as early
morning or late evening.
Industry Canada
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Privacy of communications may not be ensured when using
this telephone.
The term ‘’IC:‘’ before the certification/registration
number only signifies that the Industry Canada technical
specifications were met.
The Ringer Equivalence Number (REN) for this terminal
equipment is 0.1. The REN indicates the maximum number
of devices allowed to be connected to a telephone
interface. The termination of an interface may consist of any
combination of devices subject only to the requirement
that the sum of the RENs of all the devices not exceed five.
This product meets the applicable Innovation, Science and
Economic Development Canada technical specifications.
California Energy
Commission battery
charging testing
instructions
This telephone is set up to comply with the energy-conserving
standards right out of the box. These instructions are intended
for California Energy Commission (CEC) compliance testing
only. When the CEC battery charging testing mode is
activated, all telephone functions, except battery charging, will
be disabled.
To activate the CEC battery charging testing mode:
1. Unplug the telephone base power adapter from the
power outlet. Make sure all handsets are plugged with
charged batteries before proceeding.
2. While you press and hold /FIND HANDSET, plug the
telephone base power adapter back to the power outlet.
3. After about 20 seconds, when the IN USE light starts
flashing, release /FIND HANDSET and then press it
again within two seconds. The process takes up to one
minute to complete. When the phone successfully enters
the CEC battery charging testing mode, the IN USE light
turns off and all handsets display To register HS... and
...see manual alternately.
If the phone fails to enter this mode, repeat all the steps
mentioned above. The telephone base will be powered up
as normal if you fail to press /FIND HANDSET within two
seconds in Step 3.
To deactivate the CEC battery charging testing mode:
1. Unplug the telephone base power adapter from
the power outlet, and then plug it back in. Then the
telephone base is powered up as normal.
2. Place the handset in the telephone base to register
it back. The handset displays Registering.... If the
registration is successful, the handset screen displays
Registered and beeps. The handset is registered with the
telephone base.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the
holder of a valid proof of purchase (“Consumer” or “you”)
that the Product and all accessories provided in the sales
package (“Product”) are free from defects in material
and workmanship, pursuant to the following terms and
conditions, when installed and used normally and in
accordance with the Product operating instructions. This
limited warranty extends only to the Consumer for Products
purchased and used in the United States of America and
Canada.
What will VTech do if the Product is not free from defects
in materials and workmanship during the limited warranty
period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service
representative will replace at VTech’s option, without charge,
a Materially Defective Product. If we replace the Product,
we may use new or refurbished replacement parts. If we
choose to replace the Product, we may replace it with a new
or refurbished Product of the same or similar design. We will
retain defective parts, modules, or equipment. Replacement
of the Product, at VTech’s option, is your exclusive remedy.
VTech will return the replacement Products to you in working
condition. You should expect the replacement to take
approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for
ONE (1) YEAR from the date of purchase. If VTech replaces a
Materially Defective Product under the terms of this limited
warranty, this limited warranty also applies to the replacement
Product for a period of either (a) 90 days from the date
the replacement Product is shipped to you or (b) the time
remaining on the original one-year warranty; whichever is
longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident,
shipping or other physical damage, improper
installation, abnormal operation or handling, neglect,
inundation, fire, water or other liquid intrusion.
2. Product that has been subjected to contact with liquid,
water, rain, extreme humidity or heavy perspiration,
sand, dirt or the like; but then only to the extent the
damage was not caused by incorrectly securing
the waterproof handset’s protective elements, for
example, failing to properly close a seal), or such
protective elements are damaged or missing (e.g.
a cracked battery door), or subjecting a Product to
conditions beyond its stated specifications or limits
(e.g. 30 minutes in 1 meter of fresh water).
3. Product that has been damaged due to repair,
alteration or modification by anyone other than an
authorized service representative of VTech;
4. Product to the extent that the problem experienced
is caused by signal conditions, network reliability, or
cable or antenna systems;
5. Product to the extent that the problem is caused by
use with non-VTech accessories;
6. Product whose warranty/quality stickers, product serial
number plates or electronic serial numbers have been
removed, altered or rendered illegible;
7. Product purchased, used, serviced, or shipped for
repair from outside the United States of America
or Canada, or used for commercial or institutional
purposes (including but not limited to Products used
for rental purposes);
8. Product returned without a valid proof of purchase
(see item 2 below); or
9. Charges for installation or set up, adjustment of
customer controls, and installation or repair of systems
outside the unit.
How do you get warranty service?
To obtain warranty service in the United States of America,
please visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to
phones.vtechcanada.com or dial 1 (800) 267-7377.
NOTE: Before calling for service, please review the user’s
manual - a check of the Product’s controls and features may
save you a service call.
Except as provided by applicable law, you assume the risk
of loss or damage during transit and transportation and are
responsible for delivery or handling charges incurred in
the transport of the Product(s) to the service location. VTech
will return replaced Product under this limited warranty.
Transportation, delivery or handling charges are prepaid.
VTech assumes no risk for damage or loss of the Product
in transit. If the Product failure is VTech assumes no risk for
damage or loss of the Product in transit. If the Product failure
is not covered by this limited warranty, or proof of purchase
does not meet the terms of this limited warranty, VTech will
notify you and will request that you authorize the cost of
replacement prior to any further replacement activity. You
must pay for the cost of replacement and return shipping
costs for the replacement of Products that are not covered by
this limited warranty.
What must you return with the Product to get warranty
service?
1. Return the entire original package and contents
including the Product to the VTech service location
along with a description of the malfunction or
difficulty; and
2. Include a “valid proof of purchase” (sales receipt)
identifying the Product purchased (Product model)
and the date of purchase or receipt; and
3. Provide your name, complete and correct mailing
address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement
between you and VTech. It supersedes all other written or
oral communications related to this Product. VTech
provides no other warranties for this Product. The warranty
exclusively describes all of VTech’s responsibilities regarding
the Product. There are no other express warranties. No one is
authorized to make modifications to this limited warranty and
you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific
legal rights, and you may also have other rights, which vary
from state to state or province to province.
Limitations: Implied warranties, including those of fitness
for a particular purpose and merchantability (an unwritten
warranty that the Product is fit for ordinary use) are limited to
one year from the date of purchase. Some states/provinces
do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. In no
event shall VTech be liable for any indirect, special, incidental,
consequential, or similar damages (including, but not limited
to lost profits or revenue, inability to use the Product or other
associated equipment, the cost of substitute equipment,
and claims by third parties) resulting from the use of this
Product. Some states/provinces do not allow the exclusion
or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of
purchase
Disclaimer and Limitation
of Liability
VTech Communications, Inc. and its suppliers assume no
responsibility for any damage or loss resulting from the
use of this user’s manual. VTech Communications, Inc.
and its suppliers assume no responsibility for any loss or
claims by third parties that may arise through the use of
this product.
Company: VTech Communications, Inc.
Address: 9020 SW Washington Square Road - Ste 555
Tigard, OR 97223, United States
Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377
in Canada
Delete all phonebook entries:
1. Press MENU when the phone is not in use.
2. Scroll to Phonebook, and then press SELECT.
3. Scroll to Delete all, and then press SELECT
4. When the screen displays Delete all?, press
SELECT.
Edit a phonebook entry
1. When the desired entry displays, press
SELECT.
2. Use the dialing keys to edit the number, and
then press SELECT.
3. Use the dialing keys to edit the name, and
then press SELECT to save.
Dial a phonebook entry
When the desired entry appears, press
or to dial.
Caller ID
If you subscribe to caller ID service, information
about each caller appears after the first or
second ring. If you answer a call before the caller
information appears on the screen, it will not be
saved in the caller ID log.
The caller ID log stores up to 50 entries. Each
entry has up to 24 digits for the phone number
and 15 characters for the name.
If the telephone number has more that 15 digits,
only the last 15 digits appear. If the name has more
than 15 characters, only the first 15 characters are
shown and saved in the caller ID log.
Review a caller ID log entry
1. Press CID when the phone is not in use.
2. Scroll to browse through the caller ID log.
When the desired entry appears:
Press repeatedly to show different
dialing options.
Press 1 repeatedly if you need to add or
remove 1 in front of the phone number.
3. Press or to dial the displayed number.
Dial a caller ID log entry
When the desired entry appears, press
or to dial.
Save a caller ID log entry to the phonebook
1. When the desired caller ID log entry
displays, press SELECT.
2. Scroll to To Phonebook then press SELECT.
3. Use the dialing keys to modify the number,
and then press SELECT.
4. Use the dialing keys to modify the name,
and then press SELECT to save.
Delete a caller ID log entry
When the desired caller ID log entry displays,
press DELETE.
Delete all caller ID log entries
Press MENU when the phone is not in use.
Scroll to Caller ID log and then press SELECT.
Scroll to Delete all and then press SELECT
twice.
Call block
If you subscribe to caller ID service, you can
set the telephone to block unknown calls and
certain undesired calls.
The call block list stores up to 20 entries.
Block unknown calls
1. Press MENU when the phone is not in use.
2. Scroll to Call block, and then press SELECT.
3. Scroll to Calls w/o num, and then press
SELECT.
4. Scroll to choose Not block or Block, and then
press SELECT.
Add a call block list entry
1. Press MENU when the phone is not in use.
2. Scroll to Call block, and then press SELECT.
3. Scroll to Block list, and then press SELECT.
4. Scroll to Add new entry, and then press
SELECT.
5. Enter the number.
Use the dialing keys to enter the number
(up to 30 digits).
6. Press SELECT to move to the name.
7. Use the dialing keys to enter the name (up to 15
characters). Additional key presses show other
characters of that particular key.
8. Press SELECT to save.
Review call block list
1. Press MENU when the phone is not in use.
2. Scroll to Call block, and then press SELECT.
3. Scroll to Block list, and then press SELECT.
4. Press SELECT to choose Review.
Edit a call block list entry
1. When the desired entry displays, press
SELECT.
2. Use the dialing keys to edit the number, and
then press SELECT.
3. Use the dialing keys to edit the name, and
then press SELECT to save.
Save a caller ID log entry to call block list
1. When the desired caller ID log entry
displays, press SELECT.
2. Scroll to To Call block then press SELECT.
3. Use the dialing keys to modify the number,
and then press SELECT.
4. Use the dialing keys to modify the name,
and then press SELECT to save.
Delete a call block list entry
When the desired call block list entry displays,
press DELETE.
Sound settings
Key tone
You can choose from different ringer tones.
1. Press MENU when the handset is not in use.
2. Scroll to Settings, and then press SELECT.
3. Scroll to choose Key tone, and then press
SELECT.
4. Scroll to choose On or Off, and then press
SELECT to save.
Ringer tone
You can choose from different ringer tones.
1. Press MENU when the handset is not in use.
2. Scroll to Ringers, and then press SELECT.
3. Scroll to choose Home ringtone or Cell
ringtone, and then press SELECT.
4. Scroll to sample each ringer tone, and then
press SELECT to save.
NOTE
If you turn off the ringer volume, you will not hear ringer
tone samples.
Ringer volume (handset)
You can adjust the ringer volume level, or turn
the ringer off.
1. Press MENU when the handset is not in use.
2. Scroll to Ringers, and then press SELECT.
3. Scroll to choose Home volume or Cell
volume, and then
press SELECT.
4. Scroll to adjust the volume, and then press
SELECT to save.
NOTE
If the handset ringer volume is set to off, that handset
is silenced for all incoming calls except paging tone.
Ringer volume (telephone base)
You can adjust the telephone base volume
level by pressing /VOL/ + on the top of the
telephone base when idle.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the handset
without disconnecting the call. The next call rings
normally at the preset volume.
Press OFF or MUTE on the handset. The
handset displays .
About answering system
and voicemail service
For message recording, your telephone has a
built-in answering system, and it also support
voicemail service offered by your telephone
service provider (subscription is required, and
fee may apply).
The main differences between them are as
follows:
Category Built-in answering
system
Voicemail from
telephone service
Storage Messages are stored
in the telephone
base.
Messages are
stored in a server or
system provided
by your telephone
service.
Your messages will
not be deleted
automatically.
You have to delete
your messages
manually.
Your messages may
be automatically
deleted after a
period of time.
Contact your
telephone service
provider for more
details.
Method
to retrieve
messages
When you received
new messages,
handset displays
XX new messages
and the message
window on the
telephone base
flashes.
When you received
new messages, the
handset displays
and New
voicemail.
To retrieve
messages, usually
there are two ways:
Press a button on
the telephone
base; or
Access remotely
with an access code.
To retrieve
messages, you
need an access
number and/or a
passcode provided
by your telephone
service provider.
Set your built-in
answering system
Your answering system has various features, read
below for the basic settings.
The answering system can record and store
up to 99 messages. Each message can be up
to three minutes in length. The total storage
capacity for the announcement, messages and
memos is approximately 23 minutes. The actual
recording time depends on individual message
characteristics.
Your answering system allows you to set your
announcement, to save and delete messages,
activate call screening, to set number of rings
before pick up, to access remotely, and to
control the recording time.
Turn the answering system on or off
The answering system must be turned on to
answer and record messages.
To turn on or off with the telephone base:
Press /ANS ON on the telephone base to turn
the built-in answering system on or off.
To turn on or off with the handset:
1. Press MENU when the phone is not in use.
2. Scroll to highlight Answering sys, and then
press SELECT.
3. Scroll to highlight Answer on/off, and then
press SELECT.
4. Scroll to highlight On or Off, and then press
SELECT to save. You hear a confirmation tone.
Default announcement
The telephone is preset with a greeting that
answers calls with “Hello, please leave a
message after the tone.” You can use this preset
announcement, or replace it with your own.
Record your own announcement
The announcement can be up to 90 seconds in
length.
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys and then press
SELECT twice.
3. The handset announces, Announcement,
press play or press record.
4. Press 7 to record. The handset announces,
“Record after the tone. Press STOP when you
are done. After the tone, speak towards the
handset microphone. Then, press 5 when done.
Play the announcement
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys and then press
SELECT twice.
3. The handset announces, Announcement,
press play or press record.
4. Press 2 to play the announcement.
Delete the announcement
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys and then press
SELECT twice.
3. The handset announces, Announcement,
press play or press record.
4. Press 3 to delete your own recorded
announcement.
Set number of rings
You can set the answering system to answer an
incoming call after 2, 3, 4, 5 or 6 rings; or toll saver. If
you choose toll saver, the answering system answers
a call after 2 rings when you have new messages, or
after 4 rings when you have no new messages.
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys then press SELECT.
3. Scroll to Ans sys setup then press SELECT.
4. Scroll to # of rings then press SELECT.
5. Scroll to choose 2, 3, 4, 5, 6 or Toll saver.
6. Press SELECT to save and you hear a
confirmation tone.
Message alert tone
When the message alert tone is set to on, and
there is at least one new message, the telephone
base beeps every 10 seconds. The message alert
tone is preset to off.
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys then press SELECT.
3. Scroll to Ans sys setup then press SELECT.
4. Scroll to Msg alert tone then press SELECT.
5. Scroll to choose On or Off.
6. Press SELECT to save and you hear a
confirmation tone.
Voice guide
This feature is an alternative way for you to
do the basic setup of the answering system.
You can follow the voice guide to record your
own announcement, set the number of rings
and the message alert tone.
1. Press MENU when the phone is not in use.
2. Scroll to scroll to Answering sys, and then
press SELECT.
3. Scroll to highlight Voice guide, and then press
SELECT. You hear the voice prompt “Hello!
This voice guide will assist you with the basic
setup of your answering system.
4. Setup your answering system by inputting
designated numbers as instructed in the
voice guide.
User your built-in
answering system
New message indication
When there are new answering system
messages, The handset displays XX new
messages and the message window on the
telephone base flashes.
Message playback
To playback messages at the telephone base:
Press /PLAY when the phone is not in use.
Options during playback:
Press /VOL/ + to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message
currently playing. Press /REPEAT twice to
listen to the previous message.
Press X/DELETE to delete the playing message.
The system advances to the next message.
Press /STOP to stop.
To playback messages at the handset:
Press MENU to choose Play messages. Press
SELECT.
Options during playback:
Press VOLUME/ or VOLUME/ to adjust
the message playback volume.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press 4 during
the time and day announcement to hear the
previous message.
Press 3 to delete the playing message.
Press OFF to stop the playback.
Press to switch between speakerphone
mode and handset mode.
Delete all old messages at the telephone base
To delete all old messages at the telephone base:
Press X/DELETE twice when the phone is not in
use.
To delete all old messages on a handset:
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys, and then press
SELECT.
3. Scroll to Delete all old, and then press SELECT
twice. You hear a confirmation tone.
Remote access
A two-digit security code is required to access
the answering system remotely from any
touch-tone telephone. The preset code is 19.
You can use this preset code, or set your own.
1. Dial your telephone number from any
touch-tone telephone.
2. When the system plays your announcement,
enter the two-digit security code.
3. You can enter one of the following remote
commands.
Command Description
1Play all messages.
2Play new messages.
3Delete the current message
(during playback).
33 Delete all old messages.
4Repeat the current message
(during playback).
5Stop.
*5 Hear a list of remote
commands.
6Skip to the next message
(during playback).
*7 Record a new announcement.
8End the call.
0Turn the answering system on
or off.
4. Hang up or press 8 to end the call.
Remote access code
A two-digit security code is required to access
the answering system remotely from any touch-
tone telephone. The preset code is 19. You can
set the code from 00 to 99.
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys then press SELECT.
3. Scroll to Ans sys setup then press SELECT.
4. Scroll to Remote code, and then press
SELECT.
5. Use the dialing keys to enter a two-digit
number.
-OR-
Scroll to a desired two-digit number.
6. Press SELECT to save and you hear a
confirmation tone.
Use the built-in
answering system and
voicemail service
You can use your answering system and
voicemail service together by setting your
answering system to answer before voicemail
service answers as described below. To learn
how to program your voicemail settings, contact
your telephone service provider.
If you are on a call, or if the answering system
is busy recording a message and you receive
another call, the second caller can leave a
voicemail message.
Set your answering system to answer calls
at least two rings earlier than your voicemail
service is set to answer. For example, if your
voicemail service answers after six rings, set your
answering system to answer after four rings.
Some voicemail service providers may program
the delay before answering calls in seconds
instead of rings. In this case, allow six seconds
per ring when determining the appropriate
setting.
Retrieve voicemail from
telephone service
Voicemail is a feature available from most
telephone service providers. It may be included
with your telephone service, or may be optional.
Fees may apply.
Retrieve voicemail
When you received a voicemail, the handset
displays and New voicemail. To retrieve, you
typically dial an access number provided by your
telephone service provider, and then enter a
security code. Contact your telephone service
provider for instructions on how to configure the
voicemail settings and listen to messages.
Turn off the new voicemail indicators
If you have retrieved your voicemail while away
from home, and the handset still displays the new
voicemail indicators, use this feature to turn off
the indicators.
NOTE
This feature turns off the indicators only, it does not
delete your voicemail messages.
1. Press MENU when the handset is not in use.
2. Scroll to Settings, and then press SELECT.
3. Scroll to Clr voicemail, and then press
SELECT.
Expand your telephone
system
You can add new handsets (DS6600), cordless
headsets or speakerphones to your telephone
system (purchased separately) to your telephone
system. Visit www.vtechphones.com for a list
of compatible devices. Your telephone base
supports a maximum of five devices.
For more details, refer to the user’s manual that
comes with your DS6600 new handset, cordless
headset or speakerphone respectively.
ECO mode
This power conserving technology reduces power
consumption for optimal battery performance. The ECO
mode activates automatically whenever the handset is
synchronized with the telephone base.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original
packing materials to protect your telephone if you ever
need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not
use the handset outdoors in the rain, or handle it with
wet hands. Do not install the telephone base near a sink,
bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges
harmful to electronic equipment. For your own safety, take
caution when using electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should
retain its luster for many years. Clean it only with a dry
non-abrasive cloth. Do not use dampened cloth or
cleaning solvents of any kind.
Telephone base control key panel:
DS6621-X (US) DS6621-X (CA)
  • Page 1 1
  • Page 2 2

VTech DS6621-2 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur

dans d''autres langues