Tannoy QCI 3 Guide de démarrage rapide

Taper
Guide de démarrage rapide

Ce manuel convient également à

Quick Start Guide
QCI 3
High-Performance 3" Full-Range In-Ceiling Loudspeaker for
Installation Applications
QCI 8DC
High-Performance 8" Dual Concentric In-Ceiling Loudspeaker for
Installation Applications
PCI 8DC
Premium 8" Dual Concentric In-Ceiling Loudspeaker for
Installation Applications
3Quick Start Guide
2 QCI 3/QCI 8DC/PCI 8DC
Terminals marked with this
symbol carry electrical
current of su cient
magnitude to constitute risk of electric
shock. Use only high-quality professional
speaker cables with ¼" TS or twist-
locking plugs pre-installed. Allother
installation or modi cation should be
performed only by quali edpersonnel.
This symbol, wherever it
appears, alerts you to the
presence of uninsulated
dangerous voltage inside the enclosure -
voltage that may be su cient to
constitute a risk ofshock.
This symbol, wherever it
appears, alerts you to
important operating and
maintenance instructions in the
accompanying literature. Please read
themanual.
Caution
To reduce the risk of electric
shock, do not remove the
top cover (or the rear section). No user
serviceable parts inside. Refer servicing to
quali edpersonnel.
Caution
To reduce the risk of  re or
electric shock, do not expose
this appliance to rain and moisture.
Theapparatus shall not be exposed to
dripping or splashing liquids and no
objects  lled with liquids, such as vases,
shall be placed on the apparatus.
Caution
These service instructions
are for use by quali ed
service personnel only. Toreduce the
risk of electric shock do not perform any
servicing other than that contained in the
operation instructions. Repairshave to be
performed by quali ed servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including ampli ers)
that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding-
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
Ifthe provided plug does not  t into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Use only attachments/accessories
speci ed by themanufacturer.
12. Use only with
the cart, stand,
tripod, bracket, or
table speci ed by the
manufacturer, orsold
with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during
lightning storms or when unused for long
periods of time.
14. Refer all servicing to quali ed
service personnel. Servicing is required
when the apparatus has been damaged
in any way, such as power supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or
has beendropped.
15. The apparatus shall be connected to
a MAINS socket outlet with a protective
earthing connection.
16. Where the MAINS plug or an
appliance coupler is used as the
Important Safety
Instructions
disconnect device, the disconnect device
shall remain readily operable.
17. Correct disposal of
this product: This symbol
indicates that this product
must not be disposed of
with household waste,
according to the WEEE Directive
(2012/19/EU) and your national law.
This product should be taken to a
collection center licensed for the recycling
of waste electrical and electronic
equipment (EEE). The mishandling of this
type of waste could have a possible
negative impact on the environment and
human health due to potentially
hazardous substances that are generally
associated with EEE. At the same time,
your cooperation in the correct disposal of
this product will contribute to the
e cient use of natural resources. For
more information about where you can
take your waste equipment for recycling,
please contact your local city o ce, or
your household waste collection service.
18. Do not install in a con ned space,
such as a book case or similar unit.
19. Do not place naked  ame sources,
such as lighted candles, on the apparatus.
20. Please keep the environmental
aspects of battery disposal in mind.
Batteries must be disposed-of at a
battery collection point.
21. Use this apparatus in tropical and/or
moderate climates.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss
which may be su ered by any person who
relies either wholly or in part upon any
description, photograph, or statement
contained herein. Technical speci cations,
appearances and other information
are subject to change without notice.
All trademarks are the property of their
respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer,
Bugera and Coolaudio are trademarks
or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2019 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and
conditions and additional information
regarding Music Tribe’s Limited Warranty,
please see complete details online at
musictribe.com/warranty.
Zhongshan Eurotec
Electronics Limited
No. 10 Wanmei Road, South China
Modern Chinese Medicine Park,
Nanlang Town, 528451, Zhongshan City,
Guangdong Province, China
Las terminales marcadas con
este símbolo transportan
corriente eléctrica de
magnitud su ciente como para constituir
un riesgo de descarga eléctrica.
Utilicesolo cables de altavoz
profesionales y de alta calidad con
conectores TS de 6,3 mm o de bayoneta
pre jados. Cualquier otra instalación o
modi cación debe ser realizada
únicamente por un técnicocuali cado.
Este símbolo, siempre que
aparece, leadvierte de la
presencia de voltaje
peligroso sin aislar dentro de la caja;
estevoltaje puede ser su ciente para
constituir un riesgo dedescarga.
Este símbolo, siempre que
aparece, leadvierte sobre
instrucciones operativas y de
mantenimiento que aparecen en la
documentación adjunta. Por favor,
leaelmanual.
Atención
Para reducir el riesgo de
descarga eléctrica, no quite
la tapa (olaparte posterior). Nohay
piezas en el interior del equipo que
Instrucciones de seguridad
5Quick Start Guide
4 QCI 3/QCI 8DC/PCI 8DC
puedan ser reparadas por el usuario.
Sies necesario, póngase en contacto con
personal cuali cado.
Atención
Para reducir el riesgo
de incendio o descarga
eléctrica, no exponga este aparato a la
lluvia, humedad o alguna otra fuente que
pueda salpicar o derramar algún líquido
sobre el aparato. Nocoloque ningún
tipo de recipiente para líquidos sobre
elaparato.
Atención
Las instrucciones de servicio
deben llevarlas a cabo
exclusivamente personal cuali cado.
Paraevitar el riesgo de una descarga
eléctrica, no realice reparaciones que no
se encuentren descritas en el manual
de operaciones. Lasreparaciones deben
ser realizadas exclusivamente por
personalcuali cado.
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas
las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua.
6. Limpie este aparato con un
paño seco.
7. No bloquee las aberturas de
ventilación. Instale el equipo de acuerdo
con las instrucciones del fabricante.
8. No instale este equipo cerca de
fuentes de calor tales como radiadores,
acumuladores de calor, estufas u otros
aparatos (incluyendo ampli cadores)
que puedan producir calor.
9. No elimine o deshabilite nunca la
conexión a tierra del aparato o del cable
de alimentación de corriente. Unenchufe
polarizado tiene dos polos, uno de los
cuales tiene un contacto más ancho que
el otro. Una clavija con puesta a tierra
dispone de tres contactos: dos polos y
la puesta a tierra. El contacto ancho y el
tercer contacto, respectivamente, son los
que garantizan una mayor seguridad.
Si el enchufe suministrado con el equipo
no concuerda con la toma de corriente,
consulte con un electricista para cambiar
la toma de corriente obsoleta.
10. Coloque el cable de suministro de
energía de manera que no pueda ser
pisado y que esté protegido de objetos
a lados. Asegúrese de que el cable de
suministro de energía esté protegido,
especialmente en la zona de la clavija y en
el punto donde sale del aparato.
11. Use únicamente los dispositivos o
accesorios especi cados por el fabricante.
12. Use únicamente
la carretilla,
plataforma, trípode,
soporte o mesa
especi cados por el
fabricante o
suministrados junto con el equipo.
Altransportar el equipo, tenga cuidado
para evitar daños y caídas al tropezar con
algún obstáculo.
13. Desenchufe el equipo durante
tormentas o si no va a utilizarlo durante
un periodo largo.
14. Confíe las reparaciones únicamente
a servicios técnicos cuali cados.
La unidad requiere mantenimiento
siempre que haya sufrido algún daño,
si el cable de suministro de energía o el
enchufe presentaran daños, sehubiera
derramado un líquido o hubieran caído
objetos dentro del equipo, si el aparato
hubiera estado expuesto a la humedad
o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún
golpe o caída.
15. Al conectar la unidad a la toma de
corriente eléctrica asegúrese de que la
conexión disponga de una unión atierra.
16. Si el enchufe o conector de red
sirve como único medio de desconexión,
éste debe ser accesiblefácilmente.
17. Cómo debe
deshacerse de este
aparato: Este símbolo
indica que este aparato no
debe ser tratado como
basura orgánica, según lo indicado en la
Directiva WEEE (2012/19/EU) y a las
normativas aplicables en su país. En lugar
de ello deberá llevarlo al punto limpio
más cercano para el reciclaje de sus
elementos eléctricos/ electrónicos (EEE).
Al hacer esto estará ayudando a prevenir
las posibles consecuencias negativas para
el medio ambiente y la salud que podrían
ser provocadas por una gestión
inadecuada de este tipo de aparatos.
Además, el reciclaje de materiales
ayudará a conservar los recursos
naturales. Para más información acerca
del reciclaje de este aparato, póngase en
contacto con el Ayuntamiento de su
ciudad o con el punto limpio local.
18. No instale esta unidad en un espacio
muy reducido, tal como encastrada en
una librería o similar.
19. No coloque objetos con llama, como
una vela encendida, sobre este aparato.
20. Tenga presentes todas las
advertencias relativas al reciclaje y
correcta eliminación de las pilas. Las pilas
deben ser siempre eliminadas en un
punto limpio y nunca con el resto de la
basura orgánica.
21. Use este aparato en rangos de
temperatura moderados y/o tropicales.
NEGACIÓN LEGAL
Music Tribe no admite ningún tipo
de responsabilidad por cualquier
daño o pérdida que pudiera sufrir
cualquier persona por con ar total
o parcialmente en la descripciones,
fotografías o a rmaciones contenidas
en este documento. Las especi caciones
técnicas, imágenes y otras informaciones
contenidas en este documento están
sujetas a modi caciones sin previo
aviso. Todas las marcas comerciales
que aparecen aquí son propiedad
de sus respectivos dueños. Midas,
Klark Teknik, Lab Gruppen, Lake, Tannoy,
Turbosound, TC Electronic, TC Helicon,
Behringer, Bugera y Coolaudio son marcas
comerciales o marcas registradas de
Music Tribe Global Brands Ltd. © Music
Tribe Global Brands Ltd. 2019 Reservados
todos los derechos.
GARANTÍA LIMITADA
Si quiere conocer los detalles y
condiciones aplicables de la garantía
así como información adicional sobre la
Garantía limitada de Music Tribe, consulte
online toda la información en la web
musictribe.com/warranty.
Les points repérés par ce
symbole portent une tension
électrique su sante pour
constituer un risque d’électrocution.
Utilisez uniquement des câbles
d’enceintes professionnels de haute
qualité avec  ches Jack mono 6,35 mm ou
ches à verrouillages déjà installées.
Touteautre installation ou modi cation
doit être e ectuée uniquement par un
personnel quali é.
Ce symbole avertit de la
présence d’une tension
dangereuse et non isolée à
l’intérieur de lappareil - elle peut
provoquer des chocs électriques.
Attention
Ce symbol signale les
consignes d’utilisation
et d’entre ! Tienimportantes dans
la documentation fournie. Lisez les
consignes de sécurité du manuel
d’utilisation del’appareil.
Attention
Pour éviter tout risque de
choc électrique, ne pas
ouvrir le capot de l’appareil ni démonter
le panneau arrière. L’intérieur de
l’appareil ne possède aucun élément
réparable par l’utilisateur. Laissertoute
réparation à un professionnelquali é.
Attention
Pour réduire les risques de
feu et de choc électrique,
n’exposez pas cet appareil à la pluie,
à la moisissure, auxgouttes ou aux
éclaboussures. Ne posez pas de récipient
contenant un liquide sur lappareil
(unvase par exemple).
Attention
Ces consignes de sécurité et
d’entretien sont destinées
à un personnel quali é. Pour éviter tout
risque de choc électrique, n’e ectuez
aucune réparation sur lappareil qui ne
soit décrite par le manuel d’utilisation.
Consignes de sécurité
7Quick Start Guide
6 QCI 3/QCI 8DC/PCI 8DC
Les éventuelles réparations doivent
être e ectuées uniquement par un
technicienspécialisé.
1. Lisez ces consignes.
2. Conservez ces consignes.
3. Respectez tous les avertissements.
4. Respectez toutes les
consignes d’utilisation.
5. N’utilisez jamais l’appareil à
proximité dun liquide.
6. Nettoyez lappareil avec un
chi on sec.
7. Veillez à ne pas empêcher la bonne
ventilation de l’appareil via ses ouïes
de ventilation. Respectezles consignes
du fabricant concernant l’installation
del’appareil.
8. Ne placez pas l’appareil à proximité
d’une source de chaleur telle qu’un
chau age, une cuisinière ou tout appareil
dégageant de la chaleur (y compris un
ampli depuissance).
9. Ne supprimez jamais la sécurité
des prises bipolaires ou des prises terre.
Les prises bipolaires possèdent deux
contacts de largeur di érente. Leplus
large est le contact de sécurité. Les prises
terre possèdent deux contacts plus une
mise à la terre servant de sécurité. Si la
prise du bloc d’alimentation ou du cordon
d’ali-mentation fourni ne correspond pas
à celles de votre installation électrique,
faites appel à un électricien pour
e ectuer le changement de prise.
10. Installez le cordon d’alimentation
de telle façon que personne ne puisse
marcher dessus et qu’il soit protégé
d’arêtes coupantes. Assurez-vous
que le cordon d’alimentation est
suffisamment protégé, notamment
au niveau de sa prise électrique et de
l’endroit où il est relié à l’appareil; cela est
également valable pour une éventuelle
rallonge électrique.
11. Utilisez exclusivement
des accessoires et des appareils
supplémentaires recommandés par
lefabricant.
12. Utilisez
exclusivement des
chariots, des diables,
desprésentoirs,
despieds et des
surfaces de travail
recommandés par le fabricant ou livrés
avec le produit.
Déplacezprécautionneusement tout
chariot ou diable chargé pour éviter
d’éventuelles blessures en cas dechute.
13. Débranchez l’appareil de la tension
secteur en cas d’orage ou si lappareil
reste inutilisé pendant une longue
période de temps.
14. Les travaux d’entretien de l’appareil
doivent être e ectués uniquement par
du personnel qualifié. Aucunentretien
n’est nécessaire sauf si l’appareil est
endommagé de quelque façon que ce soit
(dommagessur le cordon d’alimentation
ou la prise par exemple), siun liquide
ou un objet a pénétré à l’intérieur du
châssis, si l’appareil a été exposé à la pluie
ou à l’humidité, s’il ne fonctionne pas
correctement ou à la suite d’une chute.
15. Lappareil doit être connecté à une
prise secteur dotée dune protection par
mise à la terre.
16. La prise électrique ou la prise
IEC de tout appareil dénué de bouton
marche/arrêt doit rester accessible
enpermanence.
17. Mise au rebut
appropriée de ce produit:
Ce symbole indique quen
accord avec la directive
DEEE (2012/19/EU) et les
lois en vigueur dans votre pays, ce produit
ne doit pas être jeté avec les déchets
ménagers. Ce produit doit être déposé
dans un point de collecte agréé pour le
recyclage des déchets d’équipements
électriques et électroniques (EEE).
Une mauvaise manipulation de ce type de
déchets pourrait avoir un impact négatif
sur l’environnement et la santé à cause
des substances potentiellement
dangereuses généralement associées à
ces équipements. En même temps,
votre coopération dans la mise au rebut
de ce produit contribuera à l’utilisation
e cace des ressources naturelles.
Pour plus d’informations sur l’endroit où
vous pouvez déposer vos déchets
d’équipements pour le recyclage,
veuillez contacter votre mairie ou votre
centre local de collecte des déchets.
18.
N’installez pas lappareil dans un
espace con né tel qu’une bibliothèque ou
meuble similaire.
19. Ne placez jamais d’objets
en ammés, tels que des bougies
allumées, sur l’appareil.
20. Gardez à l’esprit l’impact
environnemental lorsque vous mettez
des piles au rebus. Les piles usées
doivent être déposées dans un point de
collecte adapté.
21. Utilisez l’appareil dans un climat
tropical et/ou modéré.
DÉNI LÉGAL
Music Tribe ne peut être tenu pour
responsable pour toute perte pouvant
être subie par toute personne se  ant en
partie ou en totalité à toute description,
photographie ou a rmation contenue
dans ce document. Les caractéristiques,
l’apparence et d’autres informations
peuvent faire l’objet de modi cations
sans noti cation. Toutes les marques
appartiennent à leurs propriétaires
respectifs. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer,
Bugera et Coolaudio sont des marques ou
marques déposées de Music Tribe Global
Brands Ltd. © Music Tribe Global Brands
Ltd. 2019 Tous droits réservés.
GARANTIE LIMIT
É
E
Pour connaître les termes et conditions
de garantie applicables, ainsi que
les informations supplémentaires et
détaillées sur la Garantie Limitée de
Music Tribe, consultez le site Internet
musictribe.com/warranty.
Vorsicht
Die mit dem Symbol
markierten Anschlüsse
führen so viel Spannung, dassdie
Gefahr eines Stromschlags besteht.
Verwenden Sie nur hochwertige,
professionelle Lautsprecherkabel
mit vorinstallierten 6,35 mm MONO-
Klinkensteckern oder Lautsprecherstecker
mit Drehverriegelung. Alle anderen
Installationen oder Modi kationen
sollten nur von quali ziertem
Fachpersonal ausgeführt werden.
Achtung
Um eine Gefährdung durch
Stromschlag auszuschließen,
darf die Geräteabdeckung bzw.
Geräterückwandnicht abgenommen
werden. ImInnern des Geräts be nden
sich keine vom Benutzer reparierbaren
Teile. Reparaturarbeiten dürfen
nur von quali ziertem Personal
ausgeführtwerden.
Achtung
Um eine Gefährdung durch
Feuer bzw. Stromschlag
auszuschließen, darf dieses Gerät weder
Regen oder Feuchtigkeit ausgesetzt
werden noch sollten Spritzwasser oder
tropfende Flüssigkeiten in das Gerät
gelangen können. Stellen Sie keine mit
Flüssigkeit gefüllten Gegenstände, wie z.
B. Vasen, aufdasGerät.
Achtung
Die Service-Hinweise sind
nur durch quali ziertes
Personal zu befolgen. Umeine
Gefährdung durch Stromschlag zu
vermeiden, führen Sie bitte keinerlei
Reparaturen an dem Gerät durch,
dienicht in der Bedienungsanleitung
beschrieben sind. Reparaturen
sind nur von quali ziertem
Fachpersonaldurchzuführen.
1. Lesen Sie diese Hinweise.
2. Bewahren Sie diese Hinweise auf.
3. Beachten Sie alle Warnhinweise.
4. Befolgen Sie alle
Bedienungshinweise.
5. Betreiben Sie das Gerät nicht in der
Nähe vonWasser.
6. Reinigen Sie das Gerät mit einem
trockenen Tuch.
Wichtige
Sicherheitshinweise
7. Blockieren Sie nicht die
Belüftungsschlitze. Beachten
Sie beim Einbau des Gerätes die
Herstellerhinweise.
8. Stellen Sie das Gerät nicht in der
Nähe von Wärmequellen auf. Solche
Wärmequellen sind z. B. Heizkörper,
Herde oder andere Wärme erzeugende
Geräte (auch Verstärker).
9. Entfernen Sie in keinem Fall die
Sicherheitsvorrichtung von Zweipol- oder
geerdeten Steckern. Ein Zweipolstecker
hat zwei unterschiedlich breite
Steckkontakte. Ein geerdeter Stecker
hat zwei Steckkontakte und einen
dritten Erdungskontakt. Derbreitere
Steckkontakt oder der zusätzliche
Erdungskontakt dient Ihrer Sicherheit.
Falls das mitgelieferte Steckerformat
nicht zu Ihrer Steckdose passt, wenden Sie
sich bitte an einen Elektriker, damit die
Steckdose entsprechend ausgetauscht
wird.
10. Verlegen Sie das Netzkabel so,
dass es vor Tritten und scharfen Kanten
geschützt ist und nicht beschädigt
werden kann. Achten Sie bitte
insbesondere im Bereich der Stecker,
Verlängerungskabel und an der Stelle,
an der das Netzkabel das Gerät verlässt,
aufausreichendenSchutz.
11. Das Gerät muss jederzeit mit
intaktem Schutzleiter an das Stromnetz
angeschlossen sein.
12. Sollte der Hauptnetzstecker
oder eine Gerätesteckdose die
Funktionseinheit zum Abschalten sein,
muss diese immer zugänglich sein.
13. Verwenden Sie nur Zusatzgeräte/
Zubehörteile, dielaut Hersteller
geeignet sind.
14. Verwenden Sie
nur Wagen,
Standvorrich-tungen,
Stative, Halter oder
Tische, die vom
Hersteller benannt
oder im Lieferumfang des Geräts
enthalten sind. Falls Sie einen Wagen
benutzen, seien Sie vorsichtig beim
Bewegen der Wagen- Gerätkombination,
umVerletzungen durch Stolpern
zuvermeiden.
15. Ziehen Sie den Netzstecker bei
Gewitter oder wenn Sie das Gerät längere
Zeit nicht benutzen.
16. Lassen Sie alle Wartungsarbeiten
nur von quali ziertem Service-Personal
ausführen. EineWartung ist notwendig,
wenn das Gerät in irgendeiner Weise
beschädigt wurde (z. B. Beschädigung des
Netzkabels oder Steckers), Gegenstände
oder Flüssigkeit in das Geräteinnere
gelangt sind, das Gerät Regen oder
Feuchtigkeit ausgesetzt wurde, das Gerät
nicht ordnungsgemäß funktioniert oder
auf den Boden gefallen ist.
17. Korrekte Entsorgung
dieses Produkts: Dieses
Symbol weist darauf hin,
das Produkt entsprechend
der WEEE Direktive
(2012/19/EU) und der jeweiligen
nationalen Gesetze nicht zusammen mit
Ihren Haushaltsabfällen zu entsorgen.
DiesesProdukt sollte bei einer
autorisierten Sammelstelle für Recycling
elektrischer und elektronischer Geräte
(EEE) abgegeben werden.
Wegen bedenklicher Substanzen,
diegenerell mit elektrischen und
elektronischen Geräten in Verbindung
stehen, könnte eine unsachgemäße
Behandlung dieser Abfallart eine negative
Auswirkung auf Umwelt und Gesundheit
haben. Gleichzeitig gewährleistet Ihr
Beitrag zur richtigen Entsorgung dieses
Produkts die e ektive Nutzung
natürlicher Ressourcen. Fürweitere
Informationen zur Entsorgung Ihrer
Geräte bei einer Recycling-Stelle nehmen
Sie bitte Kontakt zum zuständigen
städtischen Büro, Entsorgungsamt oder zu
Ihrem Haushaltsabfallentsorgerauf.
18. Installieren Sie das Gerät nicht in
einer beengten Umgebung, zum Beispiel
Bücherregal oder ähnliches.
19. Stellen Sie keine Gegenstände mit
o enen Flammen, etwa brennende
Kerzen, auf das Gerät.
20. Beachten Sie bei der Entsorgung
von Batterien den Umweltschutz-Aspekt.
Batterien müssen bei einer Batterie-
Sammelstelle entsorgt werden.
21. Verwenden Sie das Gerät in
tropischen und/oder gemäßigten
Klimazonen.
HAFTUNGSAUSSCHLUSS
Music Tribe übernimmt keine Haftung
r Verluste, die Personen entstanden
sind, die sich ganz oder teilweise auf
hier enthaltene Beschreibungen,
Fotos oder Aussagen verlassen haben.
Technische Daten, Erscheinungsbild
und andere Informationen können
ohne vorherige Ankündigung geändert
werden. Alle Warenzeichen sind
Eigentum der jeweiligen Inhaber. Midas,
Klark Teknik, Lab Gruppen, Lake, Tannoy,
Turbosound, TC Electronic, TC Helicon,
Behringer, Bugera und Coolaudio sind
Warenzeichen oder eingetragene
Warenzeichen der Music Tribe Global
Brands Ltd. © Music Tribe Global Brands
Ltd. 2019 Alle Rechte vorbehalten.
BESCHRÄNKTE GARANTIE
Die geltenden Garantiebedingungen und
zusätzliche Informationen bezüglich der
von Music Tribe gewährten beschränkten
Garantie  nden Sie online unter
musictribe.com/warranty.
Aviso!
Terminais marcados
com o símbolo carregam
corrente elétrica de magnitude
su ciente para constituir um risco de
choque elétrico. Use apenas cabos de
alto-falantes de alta qualidade com
plugues TS de ¼" ou plugues com trava
de torção pré-instalados. Todas as outras
instalações e modi cações devem ser
efetuadas por pessoasquali cadas.
Este símbolo, onde quer que
o encontre, alerta-o para a
leitura das instruções de
manuseamento que acompanham o
equipamento. Por favor leia o manual
deinstruções.
Atenção
De forma a diminuir o
risco de choque eléctrico,
nãoremover a cobertura (ouasecção de
trás). Não existem peças substituíveis
por parte do utilizador no seu interior.
Para esse efeito recorrer a um
técnicoquali cado.
Atenção
Para reduzir o risco de
incêndios ou choques
eléctricos o aparelho não deve ser exposto
à chuva nem à humidade. Alémdisso, não
deve ser sujeito a salpicos, nem devem ser
colocados em cima do aparelho objectos
contendo líquidos, taiscomojarras.
Atenção
Estas instruções de operação
devem ser utilizadas,
emexclusivo, por técnicos de assistência
quali cados. Para evitar choques
eléctricos não proceda a reparações
ou intervenções, que não as indicadas
nas instruções de operação, salvo se
possuir as quali -cações necessárias.
Para evitar choques eléctricos não
proceda a reparações ou intervenções,
que não as indicadas nas instruções de
operação. Só o deverá fazer se possuir as
quali caçõesnecessárias.
1. Leia estas instruções.
2. Guarde estas instruções.
3. Preste atenção a todos os avisos.
4. Siga todas as instruções.
5. Não utilize este dispositivo perto
de água.
6. Limpe apenas com um pano seco.
7. Não obstrua as entradas de
ventilação. Instale de acordo com as
instruções do fabricante.
8. Não instale perto de quaisquer
fontes de calor tais como radiadores,
bocas de ar quente, fogões de sala
ou outros aparelhos (incluindo
ampli cadores) que produzam calor.
9. Não anule o objectivo de segurança
Instruções de
Segurança Importantes
9Quick Start Guide
8 QCI 3/QCI 8DC/PCI 8DC
das  chas polarizadas ou do tipo de
ligação à terra. Uma  cha polarizada
dispõe de duas palhetas sendo uma
mais larga do que a outra. Uma  cha
do tipo ligação à terra dispõe de duas
palhetas e um terceiro dente de ligação
à terra. A palheta larga ou o terceiro
dente são fornecidos para sua segurança.
Se a  cha fornecida não encaixar na sua
tomada, consulte um electricista para a
substituição da tomada obsoleta.
10. Proteja o cabo de alimentação de
pisadelas ou apertos, especialmente
nas  chas, extensões, e no local de
saída da unidade. Certi que-se de
que o cabo eléctrico está protegido.
Veri que particularmente nas  chas,
nos receptáculos e no ponto em que o
cabo sai doaparelho.
11. O aparelho tem de estar sempre
conectado à rede eléctrica com o
condutor de protecção intacto.
12. Se utilizar uma  cha de
rede principal ou uma tomada de
aparelhos para desligar a unidade
de funcionamento, esta deve estar
sempre acessível.
13. Utilize apenas ligações/acessórios
especi cados pelofabricante.
14. Utilize apenas
com o carrinho,
estrutura, tripé,
suporte, ou mesa
especi cados pelo
fabricante ou
vendidos com o dispositivo. Quandoutilizar
um carrinho, tenha cuidado ao mover o
conjunto carrinho/dispositivo para evitar
danos provocados pela terpidação.
15. Desligue este dispositivo durante
as trovoadas ou quando não for utilizado
durante longos períodos detempo.
16. Qualquer tipo de reparação deve
ser sempre efectuado por pessoal
quali cado. É necessária uma reparação
sempre que a unidade tiver sido de
alguma forma dani cada, como por
exemplo: no caso do cabo de alimentação
ou  cha se encontrarem dani cados;
naeventualidade de líquido ter sido
derramado ou objectos terem caído
para dentro do dispositivo; no caso da
unidade ter estado exposta à chuva
ou à humidade; seesta não funcionar
normalmente, ou se tiver caído.
17. Correcta eliminação
deste produto: este símbolo
indica que o produto não
deve ser eliminado
juntamente com os resíduos
domésticos, segundo a Directiva REEE
(2012/19/EU) e a legislação nacional. Este
produto deverá ser levado para um centro
de recolha licenciado para a reciclagem de
resíduos de equipamentos eléctricos e
electrónicos (EEE). O tratamento incorrecto
deste tipo de resíduos pode ter um eventual
impacto negativo no ambiente e na saúde
humana devido a substâncias
potencialmente perigosas que estão
geralmente associadas aos EEE. Ao mesmo
tempo, a sua colaboração para a eliminação
correcta deste produto irá contribuir para a
utilização e ciente dos recursos naturais.
Paramais informação acerca dos locais onde
poderá deixar o seu equipamento usado
para reciclagem, é favor contactar os
serviços municipais locais, a entidade de
gestão de resíduos ou os serviços de recolha
de resíduosdomésticos.
18. Não instale em lugares con nados,
tais como estantes ou unidades similares.
19. Não coloque fontes de chama,
tais como velas acesas, sobre o aparelho.
20. Favor, obedecer os aspectos
ambientais de descarte de bateria.
Baterias devem ser descartadas em um
ponto de coletas de baterias.
21. Use este aparelho em climas
tropicais e/ou moderados.
LEGAL RENUNCIANTE
O Music Tribe não se responsabiliza por
perda alguma que possa ser sofrida por
qualquer pessoa que dependa, seja de
maneira completa ou parcial, de qualquer
descrição, fotogra a, ou declaração aqui
contidas. Dados técnicos, aparências
e outras informações estão sujeitas
a modi cações sem aviso prévio.
Todas as marcas são propriedade de seus
respectivos donos. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer,
Bugera e Coolaudio são marcas ou marcas
registradas do Music Tribe Global Brands
Ltd. © Music Tribe Global Brands Ltd.
2019 Todos direitos reservados.
GARANTIA LIMITADA
Para obter os termos de garantia
aplicáveis e condições e informações
adicionais a respeito da garantia limitada
do Music Tribe, favor veri car detalhes na
íntegra através do website musictribe.
com/warranty.
11Quick Start Guide
10 QCI 3/QCI 8DC/PCI 8DC
Introduction
Thank you for purchasing this Tannoy high-performance ceiling loudspeaker. This product range is suited for high-level music and speech
reinforcement applications requiring exceptional sonic quality with uncompromised reliability.
Features
PCI 8DC
• Premium, high-definition loudspeaker for ceiling installation applications • 8" Dual Concentric driver featuring Tannoy point-source
symmetrical dispersion technology • Tulip Waveguide enhances the point source symmetrical dispersion properties, providing exceptional high
frequency clarity and articulation • Blue Kevlar® cone with high-excursion, rubber surround for high power handling • 3-way variable HF switch
for customised performance preferences
QCI 8DC
• High-performance loudspeaker for ceiling installation applications • 8" Dual Concentric driver featuring
Tannoy Omnimagnet technology • Polypropylene cone with rubber surround for high-excursion linearity
QCI 3
• High-performance loudspeaker for in-ceiling installation applications • 3" full-range driver with high excursion rubber surround • Glass fibre
cone for excellent sound quality and dynamic full range performance • Compact, small footprint design for smaller spaces
Common Features:
Extremely thin bezel for discreet installation • Includes round and square baffles and grilles for versatile applications • Rigid chassis for
improved bass performance and durable application • Integrated construction for easy installation • Semi matt white finish fits unobtrusively
in any environment • Powder coated UV resistant perforated steel mesh grille with dust protection • Removable grilles for custom
painting • Self-aligning clamp mounting system • Optional Tannoy logo grille badge included
Unpacking
Every Tannoy product and accessory is carefully inspected before packing. After unpacking, please inspect your product to make sure no damage
has occurred in transit. In the unlikely event of any damage, would you please notify your dealer immediately and retain your shipping carton,
as your dealer may ask you to return the faulty unit to them for inspection.
Safety Notices
Some regional construction codes require the use of a secondary method of securing loudspeakers in ceiling to provide security of a
backup support. A secondary support line should be attached from the rear of the product to a source point on the ceiling. Please consult
the relevant construction codes in your region.
When using a power driver to install the product it is essential to use the correct torque level settings to avoid over tightening and damage to
the ceiling material or clamps.
Recommended torque setting: 1.5 Nm.
Tannoy will not be held responsible for any damages caused by the improper installation of these loudspeakers.
13Quick Start Guide
12 QCI 3/QCI 8DC/PCI 8DC
Product Feature Identi cation
QCI3
Speaker Wiring
Screw Terminals
Secondary
Safety Point
Integral Back Can
Supplied Items
Speaker Assembly Speaker Assembly with Square Ba e
Clamps (X3)
Removable Covers (X3)
(for access to Clamping
Mechanism)
Circular Grille Assembly
Square Grille Assembly Square Ba e for Square Grille
15Quick Start Guide
14 QCI 3/QCI 8DC/PCI 8DC
Product Feature Identi cation
QCI 8DC
Supplied Accessories
Speaker Wiring Screw Terminals
Speaker Assembly Speaker Assembly Rear View
Dual Concentric Speaker
Circular Grille
Square Grille
Circular Ba e for Circular Grille Paint Mask for Circular Ba e
Square Ba e for Square Grille Paint Mask for Square Ba e
Mounting
Clamps (X4)
Screws (X4) for
tightening Clamps
Cutout Installation Template
17Quick Start Guide
16 QCI 3/QCI 8DC/PCI 8DC
Product Feature Identi cation
PCI 8DC
Supplied Items
Speaker and Frame Assembly
Speaker Frame Rear View
Speaker Wiring Screw Terminals
Speaker Assembly Speaker Frame
Circular Grille
Square Grille
Circular Ba e for Circular Grille
Cutout Installation Template
Paint Mask for Circular Ba e
Square Ba e for Square Grille
Paint Mask for Square Ba e
Mounting
Clamps (X4)
Locks (X3) for
securing Speaker
into Speaker Frame
HF switch (3-positions)
Dual Concentric Speaker
19Quick Start Guide
18 QCI 3/QCI 8DC/PCI 8DC
Wiring and Setting Up
Terminal Connections
1. WARNING: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.
2. Before switching the ampli er ON, double check that all connections are secure and that the polarity is correct.
3. Note: For each speaker in this series, the correct square or circular ba e has to be  tted before connecting the
speaker wiring. (The ba es are  tted from behind, and so the speaker wires cannot be connected while the ba es
are being installed.)
4. The two screw terminals on the rear of each speaker are labled positive (+) and negative (-). These connect
respectively to the positive (+) and negative (-) output terminals of your audio power ampli er.
5. Strip o approximately 8 mm (¼ ") of the outer protective layer of one conductor and twist its inner cores
together to prevent shorting from stray wires. Insert the core into the screw terminal while ensuring that correct
polarity is maintained. Repeat this for both speaker wires. Tighten the two screws to make a secure connection.
6. The screw terminals for the QCI3 and QCI 8DC are located on the rear of each speaker. The screw terminals for the
PCI 8DC are located on the speaker frame. The PCI 8DC frame can be preinstalled and wired up, and the speaker
assembly added at a later stage.
QCI3 Terminals QCI 8DC Terminals PCI 8DC Terminals
21Quick Start Guide
20 QCI 3/QCI 8DC/PCI 8DC
Installation
QCI3
1. WARNING: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.
2. The procedure below describes the installation of the QCI3 speaker into a typical stud ceiling or wall with
drywall/plasterboard.
3. Locate a suitable mounting position for the speaker, using a stud- nder.
WARNING: Make sure that there are no power lines, other cables, or plumbing such as water, sewer, gas lines in
the chosen cutout location. Also make sure that the location is far enough from the closest wall stud so that the
clamping mechanism can operate without interference.
4. Carefully mark and cutout a 117 mm (4.6") diameter hole in the drywall/plasterboard, and remove any debris.
5. Run the speaker wire from your ampli er to this location, leaving enough slack to allow for the connection.
6. To use the square speaker grille, push the speaker into the supplied square ba e.
The circular grille does not
need a circular ba e, as it  ts directly over the speaker.
Square Ba e
7. Pull out the 3 covers from the front of the speaker which hide the clamping system.
8. Each clamp can move up and down in its slot by  rst pulling out the “cable-ties” from their tucked (stowed) position,
and releasing the tab. With the tab held, move each clamp backwards down the slot as far as it will go, so the clamps
will be at the rear of the can, and inside the diameter of the cutout hole.
9. Follow the information on the previous pages to connect the speaker wires from your power ampli er to the
speaker terminals. Make sure to check that the polarity is correct and that the positive and negative wires are
securely and correctly connected.
10. Press the speaker (or speaker and square ba e assembly) into the cutout hole in the wall, making sure that the
speaker wires are not trapped.
11. Pull the clamp cable-ties forward as far as they will go. This will move the clamps forward and secure the
speaker to the wall.
Covers (X3)
Cable-ties (X3)
Release Tab Release Tab UP
Cable-tie in tucked position Cable-tie pulled out
23Quick Start Guide
22 QCI 3/QCI 8DC/PCI 8DC
12. CAUTION: do not cut o the excess cable-tie length, or the clamps can no longer be reused. Instead, tuck the excess
length back into the slots and then re-install the three covers.
13. To remove the speaker at any time, remove the three covers, pull the cable-ties out of their tucked position, and then
press the tabs, and this will allow you to pull the speaker forwards and out of the hole.
14. Install the circular grille by pressing it over the speaker. Small magnets hold it in place.
Covers (X3)
Cable-ties (X3)
tucked
Magnets (X4)
15. Alternatively, install the square grille by pressing it over the square ba e. Small magnets in the speaker surround
and the square ba e hold it in place.
Note: After installation, if the square ba e does not press  at against the drywall, insert a ½ " long screw in the oval
depression in each corner of the ba e, and hand-tighten until the ba e is  at against the drywall.
Magnets (X8)
Insert extra screw here,
if required (see note)
25Quick Start Guide
24 QCI 3/QCI 8DC/PCI 8DC
6. To use the square speaker grille,  rst move the mounting clamps out of the way by undoing the four screws
accessible from the front of the speaker. Remove the backing from the strips of double-sided tape, and push the
speaker into the supplied square ba e.
7. If you want to use the circular speaker grille, install the supplied circular ba e instead.
8. Follow the information on the previous pages to connect the speaker wires from your power ampli er to the speaker
terminals. Make sure to check that the polarity is correct and that the positive and negative wires are securely and
correctly connected.
9. Make sure that the clamps are all in their rest position, then press the speaker/ba e assembly into the cutout hole in
the wall, making sure that the speaker wires are not trapped.
Clamp Screws (X4)
Square Ba e Square Ba e and Speaker
Circular Ba e Circular Ba e and Speaker
INSTALLATION
QCI 8DC
1. WARNING: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.
2. The procedure below describes the installation of the speaker into a typical stud ceiling or wall with
drywall/plasterboard.
3. Locate a suitable mounting position for the speaker, using a stud- nder.
WARNING: Make sure that there are no power lines, other cables, or plumbing such as water, sewer, gas lines in
the chosen cutout location. Also make sure that the location is far enough from the closest wall stud so that the
clamping mechanism can operate without interference.
4. Use the supplied cutout template as a guide, and cut out a circular hole in the drywall/plasterboard. Remove any
debris from the hole. Use a suitable adhesive in the local area inside the hole to seal the drywall to the studs and
joists, to prevent ceiling buzzing.
5. Run the speaker wire from your ampli er to this location, leaving enough slack to allow for the connection.
Cutout Installation Template
27Quick Start Guide
26 QCI 3/QCI 8DC/PCI 8DC
10. Tighten the four screws accessable from the front of the speaker, until all four clamps are holding the
speaker in place.
As the screws are tightened, the clamps rotate out of their rest postion and clamp to the
drywall/plasterboard.
Note: After installation, if the square ba e does not press  at against the drywall, insert a ½ " long screw in the oval
depression in each corner of the ba e, and hand-tighten until the ba e is  at against the drywall.
11. Install the square grille by pressing it into the square ba e. Small magnets hold it in place.
Clamp Screws (X4)
12. Alternatively, Install the circular grille by pressing it into the circular ba e. Small magnets hold it in place.
13. The grilles may be painted to match the decor, before they are  tted onto the speaker ba e.
14. Use the supplied square or circular masks to help protect the speaker cones when painting.
Painting Masks in Place
Insert extra screw here,
if required (see note)
29Quick Start Guide
28 QCI 3/QCI 8DC/PCI 8DC
INSTALLATION
PCI 8DC
1. WARNING: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.
2. The procedure below describes the installation of the speaker into a typical stud ceiling with drywall/
plasterboard.
The PCI 8DC speaker frame is installed and wired, then the speaker assembly can be added later.
3. Locate a suitable mounting position for the speaker, using a stud- nder. WARNING: Make sure that there are no
power lines, other cables, or plumbing such as water, sewer, gas lines in the chosen cutout location. Also make sure
that the location is far enough from the closest wall stud so that the clamping mechanism can operate without
interference.
4. Use the supplied cutout template as a guide, and cut out a circular hole in the drywall/plasterboard. Remove any
debris from the hole. Use a suitable adhesive in the local area inside the hole to seal the drywall to the studs and
joists, to prevent ceiling buzzing.
5. Run the speaker wire from your ampli er to this location, leaving enough slack to allow for the connection.
Cutout Installation Template
6. To use the square speaker grille,  rst move the mounting clamps out of the way as described in step 9 below.
Remove the backing from the strips of double-sided tape, and push the speaker frame into the
supplied square ba e.
7. To use the circular speaker grille, push the speaker frame into the supplied circular ba e instead.
Speaker Frame Square Ba e Speaker Frame with Square Ba e
Speaker Frame Circular Ba e Speaker Frame with Circular Ba e
31Quick Start Guide
30 QCI 3/QCI 8DC/PCI 8DC
8. Follow the information on the previous pages to connect the speaker wires from your power ampli er to the speaker
terminals on the speaker frame. Make sure to check that the polarity is correct and that the positive and negative
wires are securely and correctly connected. Secure the speaker wiring to the rear ring of the frame with tie-wraps to
prevent movement.
9. Carefully press the speaker frame into the cutout hole, making sure the speaker wires are not pinched. Reach
inside the frame and rotate the clamps outwards and pull the clamps forward on their rails to secure the speaker
frame to the drywall/plasterboard. To remove the speaker frame from the hole, press the release tabs and push
the clamps back.
PCI 8DC Terminals
Clamps (X4)
Clamp
Rail
Release
10. Use the supplied square or circular masks to help protect the speaker cones when painting.
11. The grilles can be painted separately.
12. To mount the speaker into the mounted speaker frame, align the connecter on the speaker, with the
corresponding connector on the speaker frame.
Painting Masks in Place
Alignment guide
33Quick Start Guide
32 QCI 3/QCI 8DC/PCI 8DC32
13. To lock the speaker in place in the frame, press down on the three lock buttons on the front of the speaker.
Note: After installation, if the square ba e does not press  at against the drywall, insert a ½ " screw in the oval
depression in each corner of the ba e, and hand-tighten until the ba e is  at against the drywall.
14. To unlock the speaker from the speaker frame,  rst support the weight of the speaker, and rotate each lock with
a screwdriver less than half a turn.
15. The HF switch has three positions, with 0 dB being  at. Adjust as necessary to suit the room position
and acoustic conditions.
Locks
Press in to Lock
Turn to unlock
HF switch
HF Switch
+1.5 dB
0 dB +3 dB
16. Install the square grille by pressing it into the square ba e. Small magnets hold it in place. Alternatively, install the
circular grille by pressing it into the circular ba e.
Insert extra screw here,
if required (see note)
35Quick Start Guide
34 QCI 3/QCI 8DC/PCI 8DC
QCI 3 Dimensions QCI 8DC Dimensions
SQUARE
BAFFLE
CIRCULAR
BAFFLE
290 [11.4]
290 [11.4]
111 [4.4]
106 [4.2]
Ø249 [9.8]
FRONT WITHOUT GRILLE FRONT WITH GRILLE SIDE BACK
Ø289 [11.4]
114 [4.5]
106 [4.2]
Ø249 [9.8]
Ø114
[4.5]
1,5
[0.1]
3,2
[0.1]
130
[5.1]
103
[4.1]
Ø117
[4.6]
Ø134
[5.3]
146
[5.7]
154
[6.1]
146
[5.7]
154
[6.1]
3,8
[0.2]
4,9
[0.2]
Ø145
[5.7]
Ø138
[5.5]
4,2
[0.2]
5,2
[0.2]
Dimensions are mm [inch] Dimensions are mm [inch]
37Quick Start Guide
36 QCI 3/QCI 8DC/PCI 8DC
Dimensions are mm [inch]
39Quick Start Guide
38 QCI 3/QCI 8DC/PCI 8DC
SQUARE
BAFFLE
CIRCULAR
BAFFLE
FRONT WITHOUT GRILLE FRONT WITH GRILLE SIDE BACK
290 [11.4]
290 [11.4]
141 [5.5]
135 [5.3]
Ø249 [9.8]
Ø289 [11.4]
143 [5.6]
135 [5.3]
Ø249 [9.8]
PCI 8DC Dimensions
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Tannoy QCI 3 Guide de démarrage rapide

Taper
Guide de démarrage rapide
Ce manuel convient également à