Extron FOX 3G HD-SDI Manuel utilisateur

Taper
Manuel utilisateur
User Guide
FOX 3G HD-SDI
Fiber Optic Transceivers
Multi-Rate HD-SDI / SDI Fiber Optic Transceiver
68-1384-01 Rev. D
01 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within the
product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf
aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes
gefährliche Spannungen herrschen, die nicht isoliert sind und die einen
elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire
l’utente della presenza di importanti istruzioni di funzionamento e
manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron,
www.extron.com.
Инструкция по технике безопасности Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 简体中文
警告 产品上的这个标志意在警用户该产品机壳内有露的危险 电压,
险。
注意 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容,敬请访问 Extron 网站 , www.extron.com,参见
Extron 安全规范指南,产品编号 68-290-01
安全記事 • 繁體中文
警告: 若產品上使用此號,是為了提醒使用者產品機殼內存
可能會導致觸電之風險的未絕緣危險電壓
注意 品上使用此符號,是為提醒使用設備隨附的用戶手冊中有
重要的操作和維(維修説明
有關安全性指導方針法規遵守EMI/EMF 相容取範圍和相主題的詳細
訊,請瀏覽 Extron 網站:www.extron.com然後參閱Extron 安全性與法規
守手冊準則編號 68-290-01
安全上の注意
日本語
警告: この 製品上に表示されている場合は、筐体内に絶縁され
いない高電圧が流れ、電の危険があることていま
意:この 品上に表されている場合は、の取扱説書に
されている重作と保()についてユザー
を喚起するものです
安全上の注意、法規厳守、EMI/EMF適合性、その他の関連項
スト イト www.extron.com よ り Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01)ご覧ださい。
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
Copyright
© 2007-2019 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global
Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,
MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,
StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,
XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD
Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope-Trigger,
ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K , WebShare, XTRA, and
ZipCaddy
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and Regulatory
Compliance Guide on the Extron website.
Class 1 Laser Product
Any service to this product must be carried out by Extron Electronics and its qualified
service personnel.
CAUTION: Using controls, making adjustments, or performing procedures in a manner
other than what is specified herein may result in hazardous radiation exposure.
NOTE: For more information on safety guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guide” on the Extron website.
Produit laser de classe1
Si ce produit a besoin d’un quelconque entretient, celui-ci doit être fait par
ExtronElectronics et son personnel qualifié.
ATTENTION : L’utilisation de commandes, la réalisation de réglages, ou l’exécution de
procédures de manière contraire aux dispositions établies dans le présent document,
présente un risque d’exposition dangereuse aux radiations.
Remarque : Pour plus d'informations sur les directives de sécurité, les conformités de
régulation, la compatibilité EMI/EMF, l'accessibilité, et les sujets en lien, consultez le
«Informations de sécurité et de conformité Extron» sur le site internet d'Extron.
This Attention box is for
XTP and DTP ONLY,
delete for all others
Delete this entire NOTE if
the above ATTENTION IS
USED FOR XTP AND DTP
PRODUCTS. DELETE the
FIRST paragraph if NOT
TP. The second paragraph
is required if the Attention
is not used (it is duplicate
information).
Delete this entire section if
the product does not have
a battery.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
Risk of property damage.
Risque de dommages matériels.
NOTE: A note draws attention to important information.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
viiFOX 3G HD-SDI • Contents
Contents
Introduction ...............................................1
About this Manual................................................ 2
About the FOX 3G HD-SDI .................................. 2
Transceiver Configurations ............................... 2
Features .............................................................. 4
Installation and Operation .........................6
Installation Overview ............................................ 6
Connections and Settings.................................... 6
Operation .......................................................... 10
Front Panel Indicators .................................... 10
Fiber Compatibility Indications ....................... 10
Unit Mounting ..........................................11
FOX 3G HD-SDI • Contents viii
FOX 3G HD-SDI • Introduction 1
Introduction
WARNING: The FOX 3G HD-SDI outputs continuous invisible light (Class 1 rated),
which may be harmful to the eyes; use with caution.
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
Plug the attached dust caps into the optical transceivers when the fiber optic cable is
unplugged.
AVERTISSEMENT :
Le FOX 3G HD-SDI émet une lumièr
e invisible en continu
(conforme à la classe1) qui peut être dangereux pour les yeux, à utiliser avec
précaution.
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
Branchez les protections contre la poussière dans l’ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
This section introduces this manual and the FOX 3G HD-SDI transceivers.
About this Manual
About the FOX 3G HD-SDI
Features
FOX 3G HD-SDI • Introduction 2
About this Manual
This manual contains information about the following Extron FOX fiber optic transceivers:
FOX 3G HD-SDI SM — A singlemode, very long distance (up to 30 km [18.75 miles])
transceiver. See figure 1.
FOX 3G HD-SDI P SM — A singlemode, very long distance (up to 30 km [18.75 miles])
transceiver that is pathologically compliant
FOX 3G HD-SDI MM — A multimode, long distance (up to 2 km [6,561 feet]) transceiver
12V
0.3A MAX
FOX HD-SDI
HD/SDI IN
POWER
BUFFERED OUTPUTS
MODE
OPTICAL
RxTx
1 2
1 2
ON
12V
0.3A MAX
FOX HD-SDI
HD/SDI IN
POWER
BUFFERED OUTPUTS
MODE
OPTICAL
RxTx
1 2
1 2
ON
Up to 30 km (18.75 miles)
on singlemode ber
SM Model
HD-SDI Br
oadcast
Monitor
HD-SDI Camera
Ext
ron
FO
X HD-SDI SM
Fi
ber Optic
T
ransceiver
Extron
FOX HD-SDI SM
Fiber Optic
Transceiver
Video Editor
HD-SDI Broadcast
Monitor
Video Editor
OVER RANGE
STATUS
OPERATE
OPTION B
OPTION A
OVER RANGE
STATUS
OPERATE
OPTION B
OPTION A
Figure 1. Typical FOX 3G HD-SDI Application
NOTE: The three products are physically and functionally identical, with the exception
of the effective range of transmission and the compliance. In this manual, the term
“FOX 3G HD-SDI” refers to any of the products.
About the FOX 3G HD-SDI
The Extron FOX 3G HD-SDI product family consists of three models (P SM, SM, and MM)
of high performance digital (HD-SDI, SDI, or 3G-SDI) video fiber optic transceivers. The
transmitted signal can include any audio or unidirectional serial data that is embedded in the
input video.
NOTE: All transceivers in the system must be the same model (all singlemode, all
singlemode pathologically compliant, or all multimode).
Transceiver Configurations
The transceiver can be configured via its rear panel Mode DIP switches to operate in one of
three ways:
Bidirectional transceiver
Transmitter
Receiver
NOTE: See item
B
, “Mode switches,” on page 7 to set the configuration.
FOX 3G HD-SDI • Introduction 3
Bidirectional transceiver
NOTES:
In this manual, the term “transceiver” refers to any FOX 3G HD-SDI; the term
“bidirectional transceiver” refers to a FOX 3G HD-SDI configured as described in
this section.
Although the description below does allow connection of a FOX 3G HD-SDI
configured as transmitter or receiver, the typical configuration is as shown: two
bidirectional transceivers.
A FOX 3G HD-SDI that is configured as a bidirectional transceiver (see figure 2) inputs
digital video on its SDI/HD-SDI Input BNC. The transceiver converts the video input to a
proprietary signal and transmits the video over a fiber link to another FOX 3G HD-SDI that is
configured as either a bidirectional transceiver or a receiver.
12V
0.3A MAX
FOX HDSDI
HD/SDI IN
POWER
BUFFERED OUTPUTS
MODE
OPTICAL
RxTx
12
12V
0.3A MAX
FOX HDSDI
HD/SDI IN
POWER
BUFFERED OUTPUTS
MODE
OPTICAL
RxTx
12
HD-SDI
In From
Source A
FOX 3G HD-SDI
Configured as bidirectional transceiver
FOX 3G HD-SDI
Configured as bidirectional transceiver
HD-SDI
Out From
Source B
HD-SDI
Out From
Source B
HD-SDI
In From
Source B
HD-SDI
Out From
Source A
HD-SDI
Out From
Source A
Figure 2. Bidirectional Transceiver Connections
A bidirectional transceiver can also simultaneously receive a proprietary signal from another
transceiver (in any configuration) on its Optical Rx port, convert the proprietary signal back
to the original format digital video, and output the video on its own two Buffered Outputs
BNC connectors.
FOX 3G HD-SDI • Introduction 4
Transmitter and receiver
NOTE: Although the description below does allow connection of a FOX 3G HD-SDI
configured as a bidirectional transceiver, the typical configuration is as shown: a
transmitter and one or more receivers.
A FOX 3G HD-SDI that is configured as a transmitter (see figure 3) inputs digital video
on its HD/SDI Input BNC. The transmitter converts the video input to a proprietary signal
and transmits the video over a fiber link to a FOX 3G HD-SDI that is configured as either a
receiver or a bidirectional transceiver. The transmitter also simultaneously outputs the digital
video on its two Buffered Outputs BNCs.
12V
0.3A MAX
FOX HDSDI
HD/SDI IN
POWER
BUFFERED OUTPUTS
MODE
OPTICAL
RxTx
12
12V
0.3A MAX
FOX HDSDI
HD/SDI IN
POWER
BUFFERED OUTPUTS
MODE
OPTICAL
RxTx
1 2
HD-SDI
In From
Source A
FOX 3G HD-SDI
Configured as transmitter
FOX 3G HD-SDI
Configured as receiver
Transmitted HD-SDI
from source A
HD-SDI
Out From
Source A
HD-SDI
Out From
Source A
HD-SDI
Out From
Source A
FOX HD-SDI(s)
Configured as receiver(s)
Figure 3. Transmitter-to-Receiver Connections
A FOX 3G HD-SDI that is configured as a receiver receives a proprietary signal on its
Rx fiber optic port. The receiver converts the proprietary signal back to original HD-SDI,
SDI, or 3G-SDI video and outputs the video on only one of its own Buffered Output BNC
connectors, Output 2.
The receiver converts the second digital video signal that it created from the optical input
back into a proprietary signal and outputs it on the Optical Tx port over a fiber link to
another FOX 3G HD-SDI that is configured as a receiver or as a bidirectional transceiver.
NOTE: Up to 10 receivers can be daisy-chained in this manner.
Features
Fiber optic characteristics — The FOX 3G HD-SDI sends and receives digital
optical signals via fiber optic small form factor pluggable (SFP) modules with LC-type
connectors.
Extends HD-SDI, SDI, and 3G-SDI signals very long distances over a single fiber
— The FOX 3G HD-SDI supports multi-rate SDI at rates up to 2.97 Gbps, and complies
with SMPTE 259M-C, 292M, 424M, and ITU digital video standards.
(FOX 3G HD-SDI P SM only) Immunity to SDI and HD-SDI pathological signal
patterns — The FOX 3G HD-SDI P SM model adds immunity to pathological signals,
including test patterns defined by SMPTE RP 178 and SMPTE RP 198 for SD-SDI,
HD-SDI and 3G-SDI
Video input — When it is configured as a transmitter, the FOX 3G HD-SDI inputs digital
video on a BNC connector.
HD-SDI loop-through — The transceiver has two Buffered SDI/HD-SDI BNC
connectors that allows connection of a local monitor when the transceiver is configured
as a transmitter.
FOX 3G HD-SDI • Introduction 5
Video output — The transceiver outputs digital video on one or two Buffered
SDI/HD-SDI BNC connectors when it is configured as a bidirectional transceiver or a
receiver.
Dual buffered outputs — When the FOX 3G HD-SDI is configured as a transmitter,
the SDI/HD-SDI BNC output connectors can be used for previewing the video on a
local monitor.
Input equalization and reclocking on buffered outputs — The FOX 3G HD-SDI
automatically equalizes incoming multi-rate SDI signals, and reshapes and restores
signals on its buffered outputs.
Daisy chain capability — Up to 3 transceivers can be daisy chained to send the video
to multiple locations when one of more units are configured as receivers.
Real-time status LED indicators for troubleshooting and monitoring
1-inch high, quarter rack width, metal enclosures — With low profile enclosures,
the transceiver can be discreetly installed in various locations, such as behind a plasma
or LCD flat-panel display.
Rack mountable — The unit is rack mountable in any conventional 19-inch wide rack,
using any of a variety of Extron rack shelves.
Power — The 100 VAC to 240 VAC external power supply provides worldwide power
compatibility.
FOX 3G HD-SDI • Installation and Operation 6
Installation and
Operation
This sections details the installation of the FOX 3G HD-SDI, including:
Installation Overview
Connections and Settings
Operation
Installation Overview
Follow these steps to install and set up an Extron FOX 3G HD-SDI for operation:
ATTENTION:
Installation
and service must be performed by authorized personnel only.
L
’installation et l’entretien doivent être effectués par le personnel autorisé
uniquement
1.
T
urn off all of the equipment. Ensure that the video sources and the output display are
all turned off and disconnected from the power source.
2.
Mount the transceivers. See
Mounting the Transceiver on page 11.
3.
Connect the cables and configur
e the transceivers. See “Connections and Settings.”
4.
Plug in the power supplies, then tur
n on the display devices and the input devices.
Connections and Settings
All connectors are on the rear panel (figure 4).
12V
0.3A MAX
FOX HDSDI
HD/SDI IN
POWER
BUFFERED OUTPUTS
MODE
OPTICAL
RxTx
12
12
CC DDEE BBAA
Figure 4. FOX 3G HD-SDI Transceiver Connectors
A
HD-SDI Input BNC (see page 7)
D
Buffered Outputs BNC (see page 8)
B
Mode switch (see page 7)
E
Power connector (see page 8)
C
Fiber optic connectors (see page 7)
FOX 3G HD-SDI • Installation and Operation 7
A
HD-SDI Input connector (see figure 4 on the previous page) — If the
FOX 3G HD-SDI is configured as either a bidirectional transceiver or as a
transmitter, connect an HD-SDI, SDI, or 3G-SDI video input to this BNC connector.
B
Mode switches (see figure 4) — Set these DIP switches to the positions shown in the
table below to select the transceiver configuration. See Transceiver Configurations
on page 2 for more information.
SW2 Mode
Down
Up
Down Bidirectional transceiver (default position)
UpDown
Transmitter with local monitor outputs
Receiver with daisy chaining
Spare (functions as receiver with daisy chaining)
UpUp
Down
SW1
MODE
12
C
Fiber optic connectors (see figure 4) —
WARNING: The FOX 3G HD-SDI outputs continuous invisible light (Class 1
rated), which may be harmful to the eyes; use with caution.
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
Plug the attached dust caps into the optical transceivers when the fiber optic
cable is unplugged.
AVERTISSEMENT :
Le FOX 3G HD-SDI émet une lumièr
e invisible en continu
(conforme à la classe1) qui peut être dangereux pour les yeux, à utiliser avec
précaution.
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau
arrière ou dans les câbles fibre optique eux-mêmes.
Branchez les protections contre la poussière dans l’ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
NOTE: Ensure that you use the proper fiber cable for your transceivers. Typically,
singlemode fiber cable has a yellow jacket and multimode fiber cable has an
orange or aqua jacket. Also, see Fiber Compatibility Indications on page 10 to
determine the compatibility of the transceiver.
TxIn any FOX 3G HD-SDI configuration, for all one-way HD-SDI, SDI,
or 3G-SDI transmission, connect a fiber optic cable to the Optical Tx LC
connector.
Connect the free end of this fiber optic cable to the Optical Rx LC connector
on another FOX 3G HD-SDI transceiver that is configured as either a
bidirectional transceiver or a receiver.
Rx If the FOX 3G HD-SDI is configured as a bidirectional transceiver
or as a receiver, for one-way communications from the transmitting unit,
connect a fiber optic cable to the Optical Rx LC connector. Connect the free
end as detailed below:
In a 2-transceiver system, connect the free end of this fiber optic cable to
the Optical Tx LC connector on the transmitting FOX 3G HD-SDI, which is
configured as a transmitter.
In a daisy-chained system, connect the free end of this fiber optic cable
to the Optical Tx LC connector on the previous FOX 3G HD-SDI in the daisy
chain.
OPTICAL
RxTx
OPTICAL
RxTx
FOX 3G HD-SDI • Installation and Operation 8
D
Buffered Outputs connectors (see figure 4 on page 6) — In any FOX 3G HD-SDI
configuration, connect a digital display to these BNC connectors. See Transceiver
Configurations for more details.
If the FOX 3G HD-SDI is configured as a bidirectional transceiver, the video
is output on both connectors 1 and 2 and is the video signal sent from the other
transceiver.
If the FOX 3G HD-SDI is configured as a receiver, the video is output on connector
2 only and is the video sent by the transmitting unit.
If the FOX 3G HD-SDI is configured as a transmitter, the video is output on both
connectors 1 and 2 and is looped through from the HD/SDI Input connector, item
A
on the previous page, on the same transceiver.
E
Power connector (see figure 4) — Plug the included external 12 VDC power supply
into this 2-pole captive screw connector. Figure 5 shows how to wire the power
connector. Use the supplied tie-wrap to strap the power cord to the extended tail of the
connector.
Power Supply
Output Cord
Captive Screw
Connector
SECTION A–A
Ridges
Smooth
AA
Tie Wrap
3
5
Figure 5. Power Connector Wiring
CAUTION: The length of the exposed wires in the stripping process is important.
The ideal length is 3/16 inch (5 mm).
Any longer and the exposed wires may touch, causing a short circuit between
them.
Any shorter and the wires can be easily pulled out even if tightly fastened by
the captive screws.
ATTENTION : La longueur des câbles exposés est importante lorsque l’on
entreprend de les dénuder. La longueur idéale est de 5mm (3/16inches).
S’ils sont tr
op longs, les câbles exposés pourraient se toucher et provoquer
un court-circuit.
S’ils sont tr
op courts, ils peuvent être tirés facilement, même s’ils sont
correctement serrés par les borniers à vis.
NOTE: Do not tin the power supply leads before installing them in the direct
insertion connector. Tinned wires are not as secure in the connectors and could
be pulled out.
FOX 3G HD-SDI • Installation and Operation 9
WARNING: The two power cord wires must be kept separate while the
power supply is plugged in. Remove power before wiring.
AVERTISSEMENT :
Les deux cor
dons d’alimentation doivent rester séparés
tant que l’alimentation est branchée. Coupez l’alimentation avant de faire les
raccordements.
CAUTION:
If not provided with a power supply, this product is intended to be supplied
by a power source marked “Class 2” or “LPS” and rated 12V DC, 0.5 A
minimum. Always use a power supply supplied by or specified by Extron. Use
of an unauthorized power supply voids all regulatory compliance certification
and may cause damage to the supply and the end product.
Unless otherwise stated, the AC/DC adapters ar
e not suitable for use in
air handling spaces or in wall cavities. The installation must always be
in accordance with the applicable provisions of National Electrical Code
ANSI/NFPA 70, article 725 and the Canadian Electrical Code part 1,
section 16. The power supply shall not be permanently fixed to a building
structure or similar structure.
Power supply voltage polarity is critical. Incorr
ect voltage polarity can damage
the power supply and the unit. The ridges on the side of the cord (figure 5 on
the previous page) identify the power cord negative lead.
ATTENTION :
Si le produit n’est pas fourni avec une source d’alimentation, il doit être
alimenté par une source d’alimentation certifiée UL de classe 2 ou LPS, avec
une tension nominale 12 Vcc, 0.5 A minimum. Utilisez toujours une source
d’alimentation fournie ou recommandée par Extron. L’utilisation d’une source
d’alimentation non autorisée annule toute conformité réglementaire et peut
endommager la source d’alimentation ainsi que le produit final.
Sauf mention contraire, les adaptateurs CA/CC ne conviennent pas à une
utilisation dans les espaces d’aération ou dans les cavités murales. Cette
installation doit toujours être conforme aux dispositions applicables du Code
américain de l’électricité (National Electrical Code) ANSI/NFPA 70, article 725,
et du Code canadien de l’électricité, partie1, section16. La source
d’alimentation ne devra pas être fixée de façon permanente à la structure de
bâtiment ou à d’autres structures similaires.
La polarité de la sour
ce d’alimentation est primordiale. Une polarité incorrecte
pourrait endommager la source d’alimentation et l’unité. Repérez le pôle
négatif du cordon d’alimentation grâce aux stries sur le côté du cordon
(illustration 5).
FOX 3G HD-SDI • Installation and Operation 10
Operation
After the transmitting and receiving units and all of their connected devices are powered up,
the system is fully operational. If any problems are encountered, ensure all traditional and
fiber cables are routed and connected properly.
Front Panel Indicators
All indicators are on the front panel (figure 6).
FOX HDSDI
UNKNOWN
2.97
Gbps
1.485
Gbps
RATE
270
Mbps
AA BB
Figure 6. FOX 3G HD-SDI transceiver indicators
A
HD-SDI Input connector — When lit, this light emitting diode (LED) indicates that the
FOX 3G HD-SDI transceiver is receiving power.
B
Mode switches — These LEDs light to indicate the detected input video rate, either
on the HD/SDI input BNC (if configured as a transmitter) or on the Optical Rx connector
(if configured as a receiver or bidirectional transceiver). The recognized rates are
270 Mbps, 1.485 Gbps, or 2.97 Gbps.
When the Rate Unknown LED lights, this indicates that an input is detected, either on
the HD/SDI input BNC (if configured as a transmitter) or on the Optical Rx connector
(if configured as a receiver or bidirectional transceiver), but that the FOX 3G HD-SDI
does not recognize the rate.
NOTES:
All four Rate LEDs blink repeatedly if a fiber optic connector module on the
rear of the unit is unseated.
The FOX 3G HD-SDI equalizes and distributes the input whether it r
ecognizes
the rate or not.
Fiber Compatibility Indications
You must use the proper fiber cable for your transceivers. Each transceiver indicates its fiber
compatibility, singlemode or multimode, at power-up by blinking the four Rate indicators.
Multimode — The Rate LEDs blink once.
Singlemode — The Rate LEDs blink twice.
NOTES:
To determine the fiber cable type, observe the cable jacket. Typically, singlemode
fiber cable has a yellow jacket and multimode fiber cable has an orange or aqua
jacket.
All transceivers in the system must be the same model (all singlemode or all
multimode). Mixed transmission mode units will not work together.
FOX 3G HD-SDI • Unit Mounting 11
Unit Mounting
Mounting the Transceiver
ATTENTION:
Installation and service must be performed by authorized personnel only.
L
’installation et l’entretien doivent être effectués par le personnel autorisé
uniquement.
The 1-inch high, quarter rack width FOX 3G HD-SDI can be placed on a tabletop. It can
also be mounted on any of mounted in any of the following ways:
On a rack shelf
Thr
ough a desk or tabletop
Under a desk or tabletop
On a pr
ojector bracket
Tabletop Use
Affix the included rubber feet to the bottom of the unit and place it in any convenient location.
Mounting Kit
Mount the unit using any compatible rack, furniture, or projector mounting kit, listed on the
Extron website (www.extron.com), in accordance with the directions included with the kit.
For rack shelf mounting, also see “UL Rack-Mounting Guidelines.”.
UL Rack-Mounting Guidelines
The following Underwriters Laboratories (UL) guidelines pertain to the installation of the
FOX 3G HD-SDI into a rack.
Elevated operating ambient — If installed in a closed or multi-unit rack assembly,
the operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consider installing the equipment in an environment compatible with
the +122 °F (+50 °C) maximum ambient temperature (Tma) specified by Extron.
Reduced air flow
— Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
Mechanical loading
— Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Cir
cuit overloading — Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might have
on overcurrent protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
Reliable earthing (gr
ounding) — Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to supply connections other
than direct connections to the branch circuit (such as the use of power strips).
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
Extron Warranty
Extron Electronics warrants this product against defects in materials and workmanship for a period of three years
from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty
workmanship and/or materials, Extron Electronics will, at its option, repair or replace said products or components,
to whatever extent it shall deem necessary to restore said product to proper operating condition, provided that it is
returned within the warranty period, with proof of purchase and description of malfunction to:
USA, Canada, South America,
and Central America:
Extron Electronics
1230 South Lewis Street
Anaheim, CA 92805
U.S.A.
Japan:
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Chiyoda-ku, Tokyo 102-0082
Japan
Europe and Africa:
Extron Europe
Hanzeboulevard 10
3825 PH Amersfoort
The Netherlands
China:
Extron China
686 Ronghua Road
Songjiang District
Shanghai 201611
China
Asia:
Extron Asia Pte Ltd
135 Joo Seng Road, #04-01
PM Industrial Bldg.
Singapore 368363
Singapore
Middle East:
Extron Middle East
Dubai Airport Free Zone
F13, PO Box 293666
United Arab Emirates, Dubai
This Limited Warranty does not apply if the fault has been caused by misuse, improper handling care, electrical
or mechanical abuse, abnormal operating conditions, or if modifications were made to the product that were not
authorized by Extron.
NOTE: If a product is defective, please call Extron and ask for an Application Engineer to receive an RA (Return
Authorization) number. This will begin the repair process.
USA: 714.491.1500 or 800.633.9876 Europe: 31.33.453.4040
Asia: 65.6383.4400 Japan: 81.3.3511.7655
Units must be returned insured, with shipping charges prepaid. If not insured, you assume the risk of loss or damage
during shipment. Returned units must include the serial number and a description of the problem, as well as the
name of the person to contact in case there are any questions.
Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality,
performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct,
indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been
advised of such damage.
Please note that laws vary from state to state and country to country, and that some provisions of this warranty may
not apply to you.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Extron FOX 3G HD-SDI Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues